SEARCH · PubMed Health

Results for “Pyrococcus furiosus”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

PubMed1995

Redox properties of the sulfhydrogenase from Pyrococcus furiosus.

The sulfhydrogenase from the extreme thermophile Pyrococcus furiosus has been re-investigated. The alpha beta gamma delta heterotetrameric enzyme of 153.3 kDa was found to contain 17 Fe, 17 S2-, and 0.74 Ni. The specific activity of the purified protein was 80 U/mg. Three EPR signals were found. A rhombic S = 1/2 signal (g = 2.07, 1.93, 1.89) was observed reminiscent in its shape and temperature dependence of spectra from [4Fe-4S](2+; 1+) clusters. However, in reductive titrations the spectrum appeared at the unusually high potential Em,7.5 = -90 mV. Moreover, the signal disappeared again at Em7.5 = -328 mV. Also, two other signals appear upon reduction: a near-axial (g = 2.02, 1.95, 1.92) S = 1/2 spectrum (Em,7.5 = -303 mV) indicative for the presence of a [2Fe-2S](2+; 1+) cluster, and a broad spectrum of unknown origin with effective g-values 2.25, 1.89 (Em,7.5 = -310 mV). We hypothesize that the latter signal is caused by magnetic interaction of the rhombic signal and a third cluster.

Archaea↗

PubMed1994

Isolation of maltose-regulated genes from the hyperthermophilic archaeum, Pyrococcus furiosus, by subtractive hybridization.

The hyperthermophilic archaeum, Pyrococcus furiosus, utilizes maltose as a preferred carbon source for growth. 32P-labeled complementary DNA (cDNA) probes representing maltose-regulated genes were obtained by a subtractive hybridization procedure that minimized retrieval of ribosomal RNA (rRNA) sequences during screening. Genomic DNA clones were isolated by positive hybridization to these probes. Genes whose expression varied both in the level of transcription, relative to rRNA, as well as in the degree of regulation were obtained; the extent of regulation varied over a wide range, from as little as fivefold to as high as 50-100-fold. DNA sequence analysis of several of these regulated genes indicated that the subtraction library included gene products required for maltose utilization (e.g., pyruvate dikinase), as well as growth-rate-related genes such as those encoding ribosomal proteins and RNA polymerase subunits. Our approach is applicable to studying gene regulation in organisms that are not amenable to classical genetic techniques.

Archaea↗

PubMed2001

The archaeal DNA primase: biochemical characterization of the p41-p46 complex from Pyrococcus furiosus.

We characterized the primase complex of the hyperthermophilic archaeon, Pyrococcus furiosus. The two proteins, Pfup41 and Pfup46, have similar sequences to the p48 and p58 subunits, respectively, of the eukaryotic DNA polymerase alpha-primase complex. Unlike previously reported primases, the Pfup41 preferentially utilizes deoxyribonucleotides for its de novo synthesis, and moreover, it synthesizes up to several kilobases in length in a template-dependent manner (Bocquier, A., Liu, L., Cann, I., Komori, K., Kohda, D., and Ishino, Y. (2001) Curr. Biol. 11, 452-456). The p41-p46 complex showed higher DNA binding activity than the catalytic p41 subunit alone. In addition, the amount of DNA synthesized by the p41-p46 complex was much more abundant and shorter in length than that by Pfup41 alone. The activity for RNA primer synthesis, which was not detected with Pfup41, was observed from the reaction using the p41-p46 complex in vitro. The in vitro replication of M13 single-stranded DNA by the P. furiosus proteins was stimulated by ATP. Observation of the labeled primers by using [gamma-(32)P]ATP in the substrates suggests ATP as the preferable initiating nucleotide for the p41-p46 complex. These results show that the primer synthesis activity of Pfup41 is regulated by Pfup46, and the p41-p46 complex may function as the primase in the DNA replication machinery of P. furiosus, in a similar fashion to the eukaryotic polymerase alpha-primase complex.

Adenosine Triphosphate↗

PubMed2005

A highly thermostable ferritin from the hyperthermophilic archaeal anaerobe Pyrococcus furiosus.

A ferritin from the obligate anaerobe and hyperthermophilic archaeon Pyrococcus furiosus (optimal growth at 100 degrees C) has been cloned and overproduced in Escherichia coli to one-fourth of total cell-free extract protein, and has been purified in one step to homogeneity. The ferritin (PfFtn) is structurally similar to known bacterial and eukaryal ferritins; it is a 24-mer of 20 kDa subunits, which add up to a total Mr 480 kDa. The protein belongs to the non-heme type of ferritins. The 24-mer contains approximately 17 Fe (as isolated), 2,700 Fe (fully loaded), or <1 Fe (apoprotein). Fe-loaded protein exhibits an EPR spectrum characteristic for superparamagnetic core formation. At 25 degrees C V(max) = 25 micromole core Fe(3+) formed per min per mg protein when measured at 315 nm, and the K(0.5) = 5 mM Fe(II). At 0.3 mM Fe(II) activity increases 100-fold from 25 to 85 degrees C. The wild-type ferritin is detected in P. furiosus grown on starch. PfFtn is extremely thermostable; its activity has a half-life of 48 h at 100 degrees C and 85 min at 120 degrees C. No apparent melting temperature was found up to 120 degrees C. The extreme thermostability of PfFtn has potential value for biotechnological applications.

Amino Acid Sequence↗

PubMed2001

Phosphoenolpyruvate synthetase from the hyperthermophilic archaeon Pyrococcus furiosus.

Phosphoenolpyruvate synthetase (PpsA) was purified from the hyperthermophilic archaeon Pyrococcus furiosus. This enzyme catalyzes the conversion of pyruvate and ATP to phosphoenolpyruvate (PEP), AMP, and phosphate and is thought to function in gluconeogenesis. PpsA has a subunit molecular mass of 92 kDa and contains one calcium and one phosphorus atom per subunit. The active form has a molecular mass of 690+/-20 kDa and is assumed to be octomeric, while approximately 30% of the protein is purified as a large ( approximately 1.6 MDa) complex that is not active. The apparent K(m) values and catalytic efficiencies for the substrates pyruvate and ATP (at 80 degrees C, pH 8.4) were 0.11 mM and 1.43 x 10(4) mM(-1). s(-1) and 0.39 mM and 3.40 x 10(3) mM(-1) x s(-1), respectively. Maximal activity was measured at pH 9.0 (at 80 degrees C) and at 90 degrees C (at pH 8.4). The enzyme also catalyzed the reverse reaction, but the catalytic efficiency with PEP was very low [k(cat)/K(m) = 32 (mM. s(-1)]. In contrast to several other nucleotide-dependent enzymes from P. furiosus, PpsA has an absolute specificity for ATP as the phosphate-donating substrate. This is the first PpsA from a nonmethanogenic archaeon to be biochemically characterized. Its kinetic properties are consistent with a role in gluconeogenesis, although its relatively high cellular concentration ( approximately 5% of the cytoplasmic protein) suggests an additional function possibly related to energy spilling. It is not known whether interconversion between the smaller, active and larger, inactive forms of the enzyme has any functional role.

Adenosine Monophosphate↗

PubMed2004

Crystalization and preliminary X-ray crystallographic analysis of the laminarinase endo-beta-1,3-glucanase from Pyrococcus furiosus.

Laminarinase endo-beta-1,3 glucanase (LamA) from Pyrococcus furiosus is an enzyme which displays its main hydrolytic activity on the 3-1,3-glucose polymer laminarin. This laminarinase is remarkably resistant to denaturation: its secondary structure is unchanged in 8 M guanidinium chloride. This protein belongs to the family 16 glycosyl hydrolases, which are enzymes that are widely distributed among bacteria, fungi and higher plants. Single crystals of P. furiosus LamAhave been obtained by the hanging-drop vapour-diffusion method using 2-methyl-2,4-pentanediol as a precipitant agent. A complete data set has been collected under cryocooling at a synchrotron source. The crystals belong to the monoclinic space group P21, with unit-cell parameters a = 44.36, b = 84.76, c = 69.23 A, a = 90, fl = 104.97, y = 90 degrees, and diffract to 2.15 A resolution.

Archaeal Proteins↗

PubMed1998

Purification, crystallization and preliminary X-ray crystallographic analysis of Pyrococcus furiosus DNA polymerase.

DNA polymerase gene from the hyperthermophilic Archaeon Pyrococcus furiosus has been cloned and the protein overexpressed in Escherichia coli to produce an active enzyme. The purified protein was crystallized from 0.08 M ammonium sulfate, 0.05 M Na-cacodylate, pH 6.5, 0.15%(v/v) NP40, 0.05%(v/v) Tween 20 and 4.5%(w/v) polyethylene glycol 6000 by the vapour-diffusion method. The orthorhombic crystals had unit-cell dimensions of a = 92.5, b = 125.4, c = 192.1 A; alpha = beta = gamma = 90 degrees. The crystals diffracted beyond 4 A on a 1.08 A synchrotron radiation source.

Cloning, Molecular↗

PubMed2001

Regulation and mechanism of action of the small heat shock protein from the hyperthermophilic archaeon Pyrococcus furiosus.

The small heat shock protein (sHSP) from the hyperthermophile Pyrococcus furiosus was specifically induced at the level of transcription by heat shock at 105 degrees C. The gene encoding this protein was cloned and overexpressed in Escherichia coli. The recombinant sHSP prevented the majority of E. coli proteins from aggregating in vitro for up to 40 min at 105 degrees C. The sHSP also prevented bovine glutamate dehydrogenase from aggregating at 56 degrees C. Survivability of E. coli overexpressing the sHSP was enhanced approximately sixfold during exposure to 50 degrees C for 2 h compared with the control culture, which did not express the sHSP. Apparently, the sHSP confers a survival advantage on mesophilic bacteria by preventing protein aggregation at supraoptimal temperatures.

Animals↗

PubMed2004

The structures of inhibitor complexes of Pyrococcus furiosus phosphoglucose isomerase provide insights into substrate binding and catalysis.

Pyrococcus furiosus phosphoglucose isomerase (PfPGI) is a metal-containing enzyme that catalyses the interconversion of glucose 6-phosphate (G6P) and fructose 6-phosphate (F6P). The recent structure of PfPGI has confirmed the hypothesis that the enzyme belongs to the cupin superfamily and identified the position of the active site. This fold is distinct from the alphabetaalpha sandwich fold commonly seen in phosphoglucose isomerases (PGIs) that are found in bacteria, eukaryotes and some archaea. Whilst the mechanism of the latter family is thought to proceed through a cis-enediol intermediate, analysis of the structure of PfPGI in the presence of inhibitors has led to the suggestion that the mechanism of this enzyme involves the metal-dependent direct transfer of a hydride between C1 and C2 atoms of the substrate. To gain further insight in the reaction mechanism of PfPGI, the structures of the free enzyme and the complexes with the inhibitor, 5-phospho-d-arabinonate (5PAA) in the presence and absence of metal have been determined. Comparison of these structures with those of equivalent complexes of the eukaryotic PGIs reveals similarities at the active site in the disposition of possible catalytic residues. These include the presence of a glutamic acid residue, Glu97 in PfPGI, which occupies the same position relative to the inhibitor as that of the glutamate that is thought to function as the catalytic base in the eukaryal-type PGIs. These similarities suggest that aspects of the catalytic mechanisms of these two structurally unrelated PGIs may be similar and based on an enediol intermediate.

Archaeal Proteins↗

PubMed2006

Archaeal Pyrococcus furiosus thymidylate synthase 1 is an RNA-binding protein.

Using a stem-loop RNA oligonucleotide (19-mer) containing an AUG sequence in the loop region as a probe, we screened the protein library from a hyperthermophilic archaeon, Pyrococcus furiosus, and found that a flavin-dependent thymidylate synthase, Pf-Thy1 (Pyrococcus furiosus thymidylate synthase 1), possessed RNA-binding activity. Recombinant Pf-Thy1 was able to bind to the stem-loop structure at a high temperature (75 degrees C) with an apparent dissociation constant of 0.6 microM. A similar stem-loop RNA structure was located around the translation start AUG codon of Pf-Thy1 RNA, and gel-shift analysis revealed that Pf-Thy1 could also bind to this stem-loop structure. In vitro translation analysis using chimaeric constructs containing the stem-loop sequence in their Pf-Thy1 RNA and a luciferase reporter gene indicated that the stem-loop structure acted as an inhibitory regulator of translation by preventing the binding of its Shine-Dalgarno-like sequence by positioning it in the stem region. Addition of Pf-Thy1 into the in vitro translation system also inhibited translation. These results suggested that this class of thymidylate synthases may autoregulate their own translation in a manner analogous to that of the well characterized thymidylate synthase A proteins, although there is no significant amino acid sequence similarity between them.

Amino Acid Sequence↗

PubMed2000

Purification and characterization of a membrane-bound hydrogenase from the hyperthermophilic archaeon Pyrococcus furiosus.

Highly washed membrane preparations from cells of the hyperthermophilic archaeon Pyrococcus furiosus contain high hydrogenase activity (9.4 micromol of H(2) evolved/mg at 80 degrees C) using reduced methyl viologen as the electron donor. The enzyme was solubilized with n-dodecyl-beta-D-maltoside and purified by multistep chromatography in the presence of Triton X-100. The purified preparation contained two major proteins (alpha and beta) in an approximate 1:1 ratio with a minimum molecular mass near 65 kDa and contained approximately 1 Ni and 4 Fe atoms/mol. The reduced enzyme gave rise to an electron paramagnetic resonance signal typical of the so-called Ni-C center of mesophilic NiFe-hydrogenases. Neither highly washed membranes nor the purified enzyme used NAD(P)(H) or P. furiosus ferredoxin as an electron carrier, nor did either catalyze the reduction of elemental sulfur with H(2) as the electron donor. Using N-terminal amino acid sequence information, the genes proposed to encode the alpha and beta subunits were located in the genome database within a putative 14-gene operon (termed mbh). The deduced sequences of the two subunits (Mbh 11 and 12) were distinctly different from those of the four subunits that comprise each of the two cytoplasmic NiFe-hydrogenases of P. furiosus and show that the alpha subunit contains the NiFe-catalytic site. Six of the open reading frames (ORFs) in the operon, including those encoding the alpha and beta subunits, show high sequence similarity (>30% identity) with proteins associated with the membrane-bound NiFe-hydrogenase complexes from Methanosarcina barkeri, Escherichia coli, and Rhodospirillum rubrum. The remaining eight ORFs encode small (<19-kDa) hypothetical proteins. These data suggest that P. furiosus, which was thought to be solely a fermentative organism, may contain a previously unrecognized respiratory system in which H(2) metabolism is coupled to energy conservation.

Catalysis↗

PubMed2001

Characterization of an aminoacylase from the hyperthermophilic archaeon Pyrococcus furiosus.

Aminoacylase was identified in cell extracts of the hyperthermophilic archaeon Pyrococcus furiosus by its ability to hydrolyze N-acetyl-L-methionine and was purified by multistep chromatography. The enzyme is a homotetramer (42.06 kDa per subunit) and, as purified, contains 1.0 +/- 0.48 g-atoms of zinc per subunit. Treatment of the purified enzyme with EDTA resulted in complete loss of activity. This was restored to 86% of the original value (200 U/mg) by treatment with ZnCl(2) (and to 74% by the addition of CoCl(2)). After reconstitution with ZnCl(2), the enzyme contained 2.85 +/- 0.48 g-atoms of zinc per subunit. Aminoacylase showed broad substrate specificity and hydrolyzed nonpolar N-acylated L amino acids (Met, Ala, Val, and Leu), as well as N-formyl-L-methionine. The high K(m) values for these compounds indicate that the enzyme plays a role in the metabolism of protein growth substrates rather than in the degradation of cellular proteins. Maximal aminoacylase activity with N-acetyl-L-methionine as the substrate occurred at pH 6.5 and a temperature of 100 degrees C. The N-terminal amino acid sequence of the purified aminoacylase was used to identify, in the P. furiosus genome database, a gene that encodes 383 amino acids. The gene was cloned and expressed in Escherichia coli by using two approaches. One involved the T7 lac promoter system, in which the recombinant protein was expressed as inclusion bodies. The second approach used the Trx fusion system, and this produced soluble but inactive recombinant protein. Renaturation and reconstitution experiments with Zn(2+) ions failed to produce catalytically active protein. A survey of databases showed that, in general, organisms that contain a homolog of the P. furiosus aminoacylase (> or = 50% sequence identity) utilize peptide growth substrates, whereas those that do not contain the enzyme are not known to be proteolytic, suggesting a role for the enzyme in primary catabolism.

Amidohydrolases↗

PubMed2006

Over-expression and characterization of the recombinant small heat shock protein from Pyrococcus furiosus.

The gene encoding a small heat shock protein (sHSP) from Pyrococcus furiosus was redesigned and chemically synthesized by using bacteria-preferred codons. The gene product was over-expressed in Escherichia coli BL21(DE)(3) and purified to homogeneity. In the presence of this protein, the activities of Taq DNA polymerase, DNA restriction endonuclease HindIII and lysozyme were protected at elevated temperature, and also, thermal aggregation of lysozyme was prevented by this purified recombinant sHSP.

Enzyme Activation↗

PubMed1998

Molecular cloning of extremely thermostable esterase gene from hyperthermophilic archaeon Pyrococcus furiosus in Escherichia coli.

A genomic library of the hyperthermophilic archaeon Pyrococcus furiosus was constructed in Escherichia coli using pBluescript II SK(+) as a cloning vector. One positive clone exhibiting thermophilic ester-hydrolyzing activity was directly detected by an in situ plate assay using the chromogenic substrate 5-bromo-4-chloro-3-indolyl-acetate. The plasmid isolated from the clone contained a 3.8 kb HindIII fragment from P. furiosus. Expression of active thermostable esterase in E. coli was independent of isopropyl-beta-D-thiogalactopyranoside, suggesting that the archaeal esterase gene was heterologously controlled by its own promoter sequence, not by the vector-located lac promoter. Assays of esterase activity in heat-treated extract of the recombinant E. coli showed the highest temperature optimum (100 degrees C) and thermostability (a half-life of 50 min at 126 degrees C) among esterases reported to date.

Cloning, Molecular↗

PubMed1999

Purification and molecular characterization of the tungsten-containing formaldehyde ferredoxin oxidoreductase from the hyperthermophilic archaeon Pyrococcus furiosus: the third of a putative five-member tungstoenzyme family.

Pyrococcus furiosus is a hyperthermophilic archaeon which grows optimally near 100 degreesC by fermenting peptides and sugars to produce organic acids, CO2, and H2. Its growth requires tungsten, and two different tungsten-containing enzymes, aldehyde ferredoxin oxidoreductase (AOR) and glyceraldehyde-3-phosphate ferredoxin oxidoreductase (GAPOR), have been previously purified from P. furiosus. These two enzymes are thought to function in the metabolism of peptides and carbohydrates, respectively. A third type of tungsten-containing enzyme, formaldehyde ferredoxin oxidoreductase (FOR), has now been characterized. FOR is a homotetramer with a mass of 280 kDa and contains approximately 1 W atom, 4 Fe atoms, and 1 Ca atom per subunit, together with a pterin cofactor. The low recovery of FOR activity during purification was attributed to loss of sulfide, since the purified enzyme was activated up to fivefold by treatment with sulfide (HS-) under reducing conditions. FOR uses P. furiosus ferredoxin as an electron acceptor (Km = 100 microM) and oxidizes a range of aldehydes. Formaldehyde (Km = 15 mM for the sulfide-activated enzyme) was used in routine assays, but the physiological substrate is thought to be an aliphatic C5 semi- or dialdehyde, e.g., glutaric dialdehyde (Km = 1 mM). Based on its amino-terminal sequence, the gene encoding FOR (for) was identified in the genomic database, together with those encoding AOR and GAPOR. The amino acid sequence of FOR corresponded to a mass of 68.7 kDa and is highly similar to those of the subunits of AOR (61% similarity and 40% identity) and GAPOR (50% similarity and 23% identity). The three genes are not linked on the P. furiosus chromosome. Two additional (and nonlinked) genes (termed wor4 and wor5) that encode putative tungstoenzymes with 57% (WOR4) and 56% (WOR5) sequence similarity to FOR were also identified. Based on sequence motif similarities with FOR, both WOR4 and WOR5 are also proposed to contain a tungstobispterin site and one [4Fe-4S] cluster per subunit.

Aldehyde Oxidoreductases↗

PubMed2005

Identification of a novel helicase activity unwinding branched DNAs from the hyperthermophilic archaeon, Pyrococcus furiosus.

To identify the branch migration activity in archaea, we fractionated Pyrococcus furiosus cell extracts by several chromatography and assayed for ATP-dependent resolution of synthetic Holliday junctions. The target activity was identified in the column fractions, and the optimal reaction conditions for the branch migration activity were determined using the partially purified fraction. We successfully cloned the corresponding gene by screening a heat-stable protein library made by P. furiosus genomic DNA. The gene, hjm (Holliday junction migration), encodes a protein composed of 720 amino acids. The Hjm protein is conserved in Archaea and belongs to the helicase superfamily 2. A homology search revealed that Hjm shares sequence similarity with the human PolTheta, HEL308, and Drosophila Mus308 proteins, which are involved in a DNA repair, whereas no similar sequences were found in bacteria and yeast. The Hjm helicase may play a central role in the repair systems of organisms living in extreme environments.

Adenosine Triphosphate↗

PubMed2001

Structural basis for oligosaccharide recognition by Pyrococcus furiosus maltodextrin-binding protein.

A maltodextrin-binding protein from Pyrococcus furiosus (PfuMBP) has been overproduced in Escherichia coli, purified, and crystallized. The crystal structure of the protein bound to an oligosaccharide ligand was determined to 1.85 A resolution. The fold of PfuMBP is very similar to that of the orthologous MBP from E. coli (EcoMBP), despite the moderate level of sequence identity between the two proteins (27 % identity, 46 % similarity). PfuMBP is extremely resistant to heat and chemical denaturation, which may be attributed to a number of factors, such as a tightly packed hydrophobic core, clusters of isoleucine residues, salt-bridges, and the presence of proline residues in key positions. Surprisingly, an attempt to crystallize the complex of PfuMBP with maltose resulted in a structure that contained maltotriose in the ligand-binding site. The structure of the complex suggests that there is a considerable energy gain upon binding of maltotriose in comparison to maltose. Moreover, isothermal titration calorimetry experiments demonstrated that the binding of maltotriose to the protein is exothermic and tight, whereas no thermal effect was observed upon addition of maltose at three temperatures. Therefore, PfuMBP evidently is designed to bind oligosaccharides composed of three or more glucopyranose units.

Amino Acid Sequence↗

PubMed2001

Structural basis for thermostability in aporubredoxins from Pyrococcus furiosus and Clostridium pasteurianum.

The structures of apo- and holorubredoxins from Pyrococcus furiosus (PfRd) and Clostridium pasteurianum (CpRd) have been investigated and compared using residual dipolar couplings to probe the origin of thermostability. In the native, metal (Fe or Zn) containing form, both proteins can maintain native structure at very high temperatures (>70 degrees C) for extended periods of time. Significant changes in either structure or backbone dynamics between 25 and 70 degrees C are not apparent for either protein. A kinetic difference with respect to metal loss is observed as in previous studies, but the extreme stability of both proteins in the presence of metal makes thermodynamic differences difficult to monitor. In the absence of metal, however, a largely reversible thermal denaturation can be monitored, and a comparison of the two apoproteins can offer insights into the origin of stability. Below denaturation temperatures apo-PfRd is found to have a structure nearly identical to that of the native holo form, except immediately adjacent to the metal binding site. In contrast, apo-CpRd is found to have a structure distinctly different from that of its holo form at low temperatures. This structure is rapidly lost upon heating, unfolding at approximately 40 degrees C. A PfRd mutant with the hydrophobic core mutated to match that of CpRd shows no change in thermostability in the metal-free state. A metal-free chimera with residues 1-15 of CpRd and the remaining 38 residues of PfRd is severely destabilized and is unfolded at 25 degrees C. Hence, the hydrophobic core does not seem to be the key determinant of thermostability; instead, data point to the hydrogen bond network centered on the first 15 residues or the interaction of these 15 residues with other parts of the protein as a possible contributor to the thermostability.

Amino Acid Sequence↗