SEARCH · PubMed Health

Results for “leaf angle”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

PubMed2006

Ontogenetic variation in chemical and physical characteristics of adaxial apple leaf surfaces.

The reaction of plants to environmental factors often varies with developmental stage. It was hypothesized, that also the cuticle, the outer surface layer of plants is modified during ontogenesis. Apple plantlets, cv. Golden Delicious, were grown under controlled conditions avoiding biotic and abiotic stress factors. The cuticular wax surface of adaxial apple leaves was analyzed for its chemical composition as well as for its micromorphology and hydrophobicity just after unfolding of leaves ending in the seventh leaf insertion. The outer surface of apple leaves was formed by a thin amorphous layer of epicuticular waxes. Epidermal cells of young leaves exhibited a distinctive curvature of the periclinal cell walls resulting in an undulated surface of the cuticle including pronounced lamellae, with the highest density at the centre of cells. As epidermal cells expanded during ontogenesis, the upper surface showed only minor surface sculpturing and a decrease in lamellae. With increasing leaf age the hydrophobicity of adaxial leaf side decreased significantly indicated by a decrease in contact angle. Extracted from plants, the amount of apolar cuticular wax per area unit ranged from only 0.9 microgcm(-2) for the oldest studied leaf to 1.5 microgcm(-2) for the youngest studied leaf. Differences in the total amount of cuticular waxes per leaf were not significant for older leaves. For young leaves, triterpenes (ursolic acid and oleanolic acid), esters and alcohols were the main wax components. During ontogenesis, the proportion of triterpenes in total mass of apolar waxes decreased from 32% (leaf 1) to 13% (leaf 7); absolute amounts decreased by more than 50%. The proportion of wax alcohols and esters, and alkanes to a lesser degree, increased with leaf age, whereas the proportion of acids decreased. The epicuticular wax layer also contained alpha-tocopherol described for the first time to be present also in the epicuticular wax. The modifications in the chemical composition of cuticular waxes are discussed in relation to the varying physical characteristics of the cuticle during ontogenesis of apple leaves.

Malus↗

PubMed2004

Microsurgical and laser ablation analysis of leaf positioning and dorsoventral patterning in tomato.

Leaves are arranged according to regular patterns, a phenomenon referred to as phyllotaxis. Important determinants of phyllotaxis are the divergence angle between successive leaves, and the size of the leaves relative to the shoot axis. Young leaf primordia are thought to provide positional information to the meristem, thereby influencing the positioning of new primordia and hence the divergence angle. On the contrary, the meristem signals to the primordia to establish their dorsoventral polarity, which is a prerequisite for the formation of a leaf blade. These concepts originate from classical microsurgical studies carried out between the 1920s and the 1970s. Even though these techniques have been abandoned in favor of genetic analysis, the resulting insights remain a cornerstone of plant developmental biology. Here, we employ new microsurgical techniques to reassess and extend the classical studies on phyllotaxis and leaf polarity. Previous experiments have indicated that the isolation of an incipient primordium by a tangential incision caused a change of divergence angle between the two subsequent primordia, indicating that pre-existing primordia influence further phyllotaxis. Here, we repeat these experiments and compare them with the results of laser ablation of incipient primordia. Furthermore, we explore to what extent the different pre-existing primordia influence the size and position of new organs, and hence phyllotaxis. We propose that the two youngest primordia (P1 and P2) are sufficient for the approximate positioning of the incipient primordium (I1), and therefore for the perpetuation of the generative spiral, whereas the direct contact neighbours of I1 (P2 and P3) control its delimitation and hence its exact size and position. Finally, we report L1-specific cell ablation experiments suggesting that the meristem L1 layer is essential for the dorsoventral patterning of leaf primordia.

Gene Expression Regulation, Plant↗

PubMed2026

Transforming Curcuma longa leaf waste into cellulose scaffolds.

The constant dearth of transplantable tissues and organs in India required the development of substitute biomaterials for tissue engineering. Plant-based decellularized scaffolds have become attractive options because of their abundance, ethical acceptability, architectural diversity, and lower risks of zoonotic transmission. Curcuma longa leaves were investigated in this study as a possible source of cellulose-based scaffolding for use in biomedical applications. After cuticle removal, an immersion decellularization technique utilizing sodium dodecyl sulphate (SDS) and triton-X-100 was developed to successfully remove cellular and nuclear material while maintaining leaf parenchyma architecture. Histology, DAPI staining, scanning electron microscopy, and a notable decrease in leftover DNA content all demonstrated efficient decellularization. When contrasted with native leaves, the resultant decellularized C. longa leaf scaffolds showed significant increase in porosity, water vapor transmission rate and swelling percent, and significantly lower contact angle with an optimum surface roughness promoting cell adhesion. Mechanical test manifest higher tensile strength with decreased stiffness. Fourier transform infrared spectra of leaf scaffold reveals persistence of different components except cuticle but the intensity of different peaks was decreased. The leaf scaffolds showed superior hemocompatibility and excellent compatibility with Madin-Darby canine kidney cells (MDCK) which is demonstrated by cell attachment and proliferation. MTT assay of seeded scaffold showed significantly higher metabolically active cell. In vivo subcutaneous implantation of decellularized scaffolds showed host tissue incorporation, accumulation of collagen, and neovascularization. C. longa leaf scaffolds can be utilized as cost effective and sustainable biomaterials for soft tissue engineering and regenerative medicine.

Curcuma↗

PubMed2003

Dosimetric assessment of the field abutment region in head and neck treatments using a multileaf collimator.

BACKGROUND AND PURPOSE: The use of conventional asymmetric collimators for junctioning of abutted fields can lead to significant dose inhomogeneity, due to jaw misalignment. However, recent technologic advances enable us to fabricate much finer leafpositioning accuracy. Consequently, it is anticipated that the use of multileaf collimator (MLC) will potentially improve dose homogeneity at the junction of abutted fields. In this work, we evaluated the dose inhomogeneities at the match-plane in monoisocentric three-field head and neck setups, using MLC for field abutment. MATERIAL AND METHODS: To define either the anterior or the lateral fields, the MLC was used with either the longitudinal (0 degree angle) or the transverse (90 degree angle) settings. For 0 degree setting, each leaf moves in a direction perpendicular to the gantry rotation axis, hence the "tongue and groove" (T&G) design can effect matching-area dose at the side of the leaf (Figure 1a). For 90 degree setting, the rounded shape of the leaf produces its effect at the leaf end (Figure 1b). Four combinations of abutted anterior field and abutted lateral field defined by MLC, i.e., abutted using MLC side-by-side, side-by-end, end-by-side and end-by-end, were compared (Table 1). Dose inhomogeneity was measured at the junction of the two abutted fields with films in a solid water phantom (Figure 2). The effect of jaw settings as a backup diaphragm on the dose distribution was also studied. Reproducibility of the results was confirmed by repeated measurements over a 1-year period. RESULTS: Abutted fields using MLC side-by-side caused underdose of approximately 15% (Figure 3a). Abutted fields using MLC side-by-end produced > 10% overdose that could be improved to +/- 1% for 0.5 mm overlap of the leaf end from the lateral portals (Figure 4). When using end-by-side, an overdose of approximately 15% was observed. However, the dose improved to a homogeneous dose for 0.8 mm overlap of leaf end from the anterior portal (Figure 5). End-by-end showed an overdose of > 20% (Figure 3b). This overdose could be smoothed out by overlaps of both leaf ends by 0.8 mm from both lateral and anterior portals (Figure 6). The ideal jaw position was found to be at 1 mm away from the beam central axis in any combination (Table 2). CONCLUSION: The use of MLCs for photon field junction matching is appropriate and represents an alternative approach to the problem of field matching using the asymmetric jaws in head and neck treatments.

Equipment Design↗

PubMed2006

Superhydrophobic behavior of a perfluoropolyether lotus-leaf-like topography.

We demonstrate the fabrication of 2-D arrays of nanopillars made from perfluoropolyether derivatives using a porous anodic aluminum oxide membrane as a template. Pretexturing the aluminum prior to anodization enables one to engineer multiple morphological length scales and thereby synthesize a lotus-leaf-like topography. Both nanopillars on a flat surface and on a lotus-leaf-like topology exhibit superhydrophobicity, low contact angle hysteresis, and self-cleaning.

Aluminum Oxide↗

PubMed1997

Response to stem bending in forest shrubs: stem or shoot reorientation and shoot release.

Shrubs in the forest understory may be bent by their own weight or by overstory debris. To maintain height growth they must respond to bending by vertical growth of new shoots, reorientation of older axes, or by releasing preventitious buds to form epicormic shoots. I tested for these responses in Ilex verticillata L., Cornus amomum Mill., Gaylussacia baccata (Wang.) K. Koch, Viburnum cassinoides L., Hamamelis virginiana L., and Kalmia latifolia L. For each species, I removed potentially supporting vegetation adjacent to 20 stems, left 10 stems untreated to test for bending by self weight, and bent the remaining 10 stems to 45 degrees to simulate effects of fallen debris. Stem angles and curvatures were measured from before leaf out until just before leaf fall to detect either sagging from self weight or upward bending from tension wood action. Control stems initially leaned out of vertical and five of six species sagged further into a cantilever form. Several control stems failed and bent to the ground. Stems of H. virginiana, I. verticillata, and C. amomum formed tension wood, but only the first two species bent upward. Viburnum cassinoides, G. baccata, and K. latifolia formed no tension wood and sagged further down after being bent. Epicormic shoots formed with varying frequencies in all species except K. latifolia. Epicormic shoots were the major response in C. amomum, V. cassinoides, and G. baccata. New terminal shoots on bent stems recovered toward vertical in I. verticillata and K. latifolia. Negative gravitropic response of shoots was the only recovery mechanism for K. latifolia.

Forestry↗

PubMed2006

Evaluation of two methods of predicting MLC leaf positions using EPID measurements.

In intensity modulated radiation treatments (IMRT), the position of the field edges and the modulation within the beam are often achieved with a multileaf collimator (MLC). During the MLC calibration process, due to the finite accuracy of leaf position measurements, a systematic error may be introduced to leaf positions. Thereafter leaf positions of the MLC depend on the systematic error introduced on each leaf during MLC calibration and on the accuracy of the leaf position control system (random errors). This study presents and evaluates two methods to predict the systematic errors on the leaf positions introduced during the MLC calibration. The two presented methods are based on a series of electronic portal imaging device (EPID) measurements. A comparison with film measurements showed that the EPID could be used to measure leaf positions without introducing any bias. The first method, referred to as the "central leaf method," is based on the method currently used at this center for MLC leaf calibration. It mimics the manner in which leaf calibration parameters are specified in the MLC control system and consequently is also used by other centers. The second method, a new method proposed by the authors and referred to as the "individual leaf method," involves the measurement of two positions for each leaf (-5 and +15 cm) and the interpolation and extrapolation from these two points to any other given position. The central leaf method and the individual leaf method predicted leaf positions at prescribed positions of -11, 0, 5, and 10 cm within 2.3 and 1.0 mm, respectively, with a standard deviation (SD) of 0.3 and 0.2 mm, respectively. The individual leaf method provided a better prediction of the leaf positions than the central leaf method. Reproducibility tests for leaf positions of -5 and +15 cm were performed. The reproducibility was within 0.4 mm on the same day and 0.4 mm six weeks later (1 SD). Measurements at gantry angles of 0 degrees, 90 degrees, and 270 degrees for leaf positions of -5 and +15 cm showed no significant effect of gravity. The individual leaf method could be used in various applications to improve the accuracy of radiotherapy treatment from planning to delivery. Three cases are discussed: IMRT beam verification, MLC calibration and dose calculation.

Calibration↗

PubMed2000

Measuring dew formation and its threshold value for net radiation loss on top leaves in a paddy rice crop by using the dewball: a new and simple instrument.

In a field experiment on dew formation in tropical paddy rice, the threshold value for the nocturnal net radiative loss required for dew formation was investigated during 23 nights from February to April 1994. The onset and cessation of dew were visually observed on both the top leaves of a rice crop and on a glass sphere, the "dewball", installed in the field 1.0 m above the ground. The threshold value for the nocturnal net radiative loss (Rn,thresh) necessary for dew formation on the ball was deduced from the maximum zenith angle on the ball surface reached by the dew formed. Rn,thresh was found to be linearly related to the nightly minimum vapour-pressure deficit. This linear relationship as well as the Penman-Monteith equation (an energy-balance approach) were used to predict both the time of dew onset and the duration of dew on the ball. These predicted values agreed well with the observed results. Dew duration and time of dew onset on the ball were well correlated. During most nights, dew began to form on the top leaf surfaces at almost the same time as it reached the zenith angle of 60 degrees on the ball. A linear relationship was found between the observed daily duration of dew on the top leaf surfaces of the rice crop and the estimated time when dew reached the zenith angle of 60 degrees on the ball. This relationship gave as accurate an estimation of dew duration on the top leaf surface of the rice crop as did the Penman-Monteith combination equation. This study showed that the dewball is a potentially useful device for observing dew formation.

Models, Theoretical↗

PubMed2005

Intensity-modulated radiosurgery for childhood arteriovenous malformations.

PURPOSE: Presentation of intensity-modulated radiosurgery (IMRS) for the treatment of inoperable, complex shaped pediatric arterio-venous malformations AVM. METHOD: Between 03/99 and 11/04, IMRS was delivered to seven children aged six to 18 years. Prescribed minimum doses ranged from 17.5 to 20 Gy (median 18 Gy). Radiosurgery planning and delivery used a serial tomotherapeutic IMRT technique (Peacock IMRT, North American Scientific/Nomos, Cranberry Township, PA) over two to four couch angles. A linear accelerator attached binary multi-leaf collimator was used to generate pencil beams of 10 mm by either 8.5 or 4.0 mm. Treatment planning employed an inverse treatment planning optimization algorithm. Parameters submitted to the treatment planning system were: prescription dose (PD), volume of target allowed to receive less dose (standard 3%), minimum dose (0.5 Gy less than PD), and maximum dose (200% of PD). Planning system specific IMRS target and tissue types were selected to prioritize dose conformality over dose homogeneity. The prescription isodose encompassed at least 95% of the target volume. We calculated conformality (CI) and homogeneity indices (HI) to characterize the quality of IMRS plans, and summarized preliminary clinical outcomes. FINDINGS: Target volumes ranged from 0.71 to 63.02 cm(3) (median 13.8 cm(3), 6/7 AVM larger than 10 cm(3)). Median CI was 1.07 (range 1.05 to 1.7) according to RTOG criteria. Median HI was 1.12 (range 1.09 to 1.23). During limited follow-up (median 32 months, range 5 to 53 months), two AVM completely obliterated at 19 and 22 months, and partial obliteration (>75%) was observed in three cases. No treatment-related side effects, other than acute nausea and temporary headaches interpreted as being associated with changes in cerebral blood distribution, were observed. CONCLUSIONS: IMRS can allow for highly conformal planning and delivery of radiosurgery radiation doses even if pediatric AVM target volumes are large and/or highly complex in shape. This technique has been seen to result in favorable preliminary outcomes, thus supporting future exploration of this technique in pediatric and adult patients.

Adolescent↗

PubMed1992

Computer-assisted generation of multi-leaf collimator settings for conformation therapy.

Techniques for the automatic set up of the individual leaf positions of a Philips multi-leaf collimator system to cover a defined target volume are described. Tumour outline data for multi-field treatments may be obtained from one of two techniques, either from simulator images or from cross-sectional computed tomography (CT) slices. In the first technique, simulator images are digitized directly from image intensifier video signals or from conventional film radiographs using a CCD camera. Corrections for image distortion are carried out before reformatting the digitized images to a common data structure. Target outlines are subsequently traced interactively on the digital image to create an outline file. In the second technique, target volumes are defined on several individual CT slices and these are then used to obtain projected graphical views from any desired angle. In both techniques, a scaled graphical representation of leaf positions is then displayed and set relative to the outer edge of the target outline. Both techniques allow interactive repositioning of single leaves when required, or the operator can specify a margin around the projected target volume. Leaf prescription data files are created and are transferred via a Decnet-OSI-Opennet network link to an Intel microcomputer, which is used to drive the device itself. Examples of both techniques are given.

Humans↗

PubMed2004

Crop growth and development effects on surface albedo for maize and cowpea fields in Ghana, West Africa.

The albedo (alpha) of vegetated land surfaces is a key regulatory factor in atmospheric circulation and plays an important role in mechanistic accounting of many ecological processes. This paper examines the influence of the phenological stages of maize (Zea mays) and cowpea (Vigna unguiculata) fields on observed albedo at a tropical site in Ghana. The crops were studied for the first and second planting dates in the year 2002. Crop management was similar for both seasons and measurements were taken from 10 mx10-m plots within crop fields. Four phenological stages were distinguished: (1) emergence, (2) vegetative, (3) flowering, and (4) maturity. alpha measured from two reference surfaces, short grass and bare soil, were used to study the change over the growing seasons. Surface alpha was measured and simulated at sun angles of 15, 30, 45, 60, and 75 degrees . Leaf area index (LAI) and crop height (CH) were also monitored. Generally, alpha increases from emergence to maturity for both planting dates in the maize field but slightly decreases after flowering in the cowpea field. For maize, the correlation coefficient ( R) between alpha and LAI equals 0.970, and the R between alpha and CH equals 0.969. Similarly, for cowpea these Rs are 0.988 and 0.943, respectively. A modified albedo model adequately predicted the observed alphas with an overall R>0.860. The relative difference in surface alpha with respect to the alpha values measured from the two reference surfaces is discussed. Data presented are expected to be a valuable input in agricultural water management, crop production models, eco-hydrological models and in the study of climate effects of agricultural production, and for the parameterization of land-surface schemes in regional weather and climate models.

Agriculture↗

PubMed2005

The shield-backed bug, Pachycoris stallii: description of immature stages, effect of maternal care on nymphs, and notes on life history.

The life history of the shield-backed bug, Pachycoris stallii Uhler (Heteroptera: Scutelleridae), immatures was studied on its host plant, Croton californicus Muell.-Arg. (Euphorbiaceae), in Baja California Sur, Mexico. Immature stages are described and illustrated. Pachycoris stallii is bi- or multivoltine and occurs in xeric areas with sandy soil where it is rarely encountered away from C. californicus. Nymphs and adults feed on seeds within C. californicus fruit. Bugs oviposit on the underside of leaves, and females guard their eggs and first-instar nymphs from natural enemies. Embryonic orientation of prolarvae is nonrandom; each embryo is oriented with its venter directed toward the ground. This orientation may facilitate aggregation of first instars. The longitudinal axes of eggs are always oriented upward at about a 16 degree angle of deviation from a line perpendicular to the leaf surface. This is the first recorded observation of this phenomenon in Pentatomoidea. Experimental removal of females guarding first instars results in 100% loss of nymphs, and this is attributed to disruption of the aggregative behavior of nymphs. Maternal guarding appears to be a net benefit to P. stallii, despite possible costs to the brooding female.

Animals↗

PubMed1997

Crown architecture of Abies balsamea from four canopy positions.

Data collected from four distinct canopy positions from each of 39 Abies balsamea (L.) Miller trees were used to construct models to describe the cumulative leaf area distribution within the crown and to predict the needle mass of individual branches, the average branch angle, branch diameter, branch length, and crown radius per whorl, and the average number of living branches per whorl. We tested the hypotheses that regression models are equal among canopy positions and that a model to predict branch needle mass is valid at the northern and southern extremes of the central climatic zone of Maine. Canopy position had an effect on the models constructed to predict needle mass, branch angle, branch diameter, branch length, crown radius, and the number of living branches per whorl. However, compared with an expanded model that incorporated parameters calculated for each crown class, there was only a small loss in model precision when a general model constructed from data pooled from all crown classes was used to predict needle mass, branch angle, and branch diameter. Regression equations unique to each crown class were needed to predict crown shape and leaf area distribution in the crown satisfactorily. Our branch needle mass model, which was constructed from data collected at the southern extreme of the central climatic zone of Maine, consistently underestimated needle branch mass when applied to the northern extreme of the central climatic zone.

Journal Article↗

PubMed2001

Mandible movements in ants.

Ants use their mandibles for almost any task, including prey-catching, fighting, leaf-cutting, brood care and communication. The key to the versatility of mandible functions is the mandible closer muscle. In ants, this muscle is generally composed of distinct muscle fiber types that differ in morphology and contractile properties. Fast contracting fibers have short sarcomeres (2-3 microm) and attach directly to the closer apodeme, that conveys the muscle power to the mandible joint. Slow but forceful contracting fibers have long sarcomeres (5-6 microm) and attach to the apodeme either directly or via thin thread-like filaments. Volume proportions of the fiber types are species-specific and correlate with feeding habits. Two biomechanical models explain why species that rely on fast mandible strikes, such as predatory ants, have elongated head capsules that accommodate long muscle fibers directly attached to the apodeme at small angles, whereas species that depend on forceful movements, like leaf-cutting ants, have broader heads and many filament-attached fibers. Trap-jaw ants feature highly specialized catapult mechanisms. Their mandible closing is known as one of the fastest movements in the animal kingdom. The relatively large number of motor neurons that control the mandible closer reflects the importance of this muscle for the behavior of ants as well as other insects.

Animals↗

PubMed2003

Complex pattern formation by a self-destabilization of established patterns: chemotactic orientation and phyllotaxis as examples.

Stable patterns can be generated by molecular interactions involving local self-enhancement and long-range inhibition. In contrast, highly dynamic patterns result if the maxima, generated in this way, become destabilized by a second antagonistic reaction. The latter must act local and must be long-lasting. Maxima either disappear and reappear at displaced positions or they move over the field as travelling waves. The wave can have unusual properties in that they can penetrate each other without annihilation. The resulting pattern corresponds to those observed in diverse biological systems. In the chemotactic orientation of cells, the temporary signals allow the localized extensions of protrusions under control of minute external asymmetries imposed by the chemoattractant. In phyllotaxis, these signals lead to successive leaf initiation, whereby the longer-lasting extinguishing reaction can cause a displacement of the subsequent leaf initiation site by the typical 137.5 degrees, the golden angle. On seashells, this patterns leads either to oblique lines that can cross each other or to oblique rows of dots. For some of the models animated simulations are available at http://www.eb.tuebingen.mpg.de/abt.4/meinhardt/theory.html.

Animals↗

PubMed2002

Quality assurance in IMRT: importance of the transmission through the jaws for an accurate calculation of absolute doses and relative distributions.

The goal of IMRT is to achieve an isodose distribution conformed to the tumor while avoiding the organs at risk. For these tasks several gantry angles are selected, each one containing a series of different leaf configurations for the multileaf collimator (MLC) (segments). Verifying the relative distributions as well as the absolute doses is an important step for quality assurance issues. We have observed that an accurate modeling of the transmission of the primary x-ray fluence through the jaws and MLC as well as the head scatter is crucial for a precise calculation of relative doses and monitor units. Also, an inaccurate calculation of the output factor for small size segments can lead to important differences in the absolute dose for points under these segments. Incorrect models could lead to systematic errors of around 5% to 10% in the calculated monitor units and a shift in the isodose curves.

Humans↗

PubMed2002

Fast and accurate leaf verification for dynamic multileaf collimation using an electronic portal imaging device.

A prerequisite for accurate dose delivery of IMRT profiles produced with dynamic multileaf collimation (DMLC) is highly accurate leaf positioning. In our institution, leaf verification for DMLC was initially done with film and ionization chamber. To overcome the limitations of these methods, a fast, accurate and two-dimensional method for daily leaf verification, using our CCD-camera based electronic portal imaging device (EPID), has been developed. This method is based on a flat field produced with a 0.5 cm wide sliding gap for each leaf pair. Deviations in gap widths are detected as deviations in gray scale value profiles derived from the EPID images, and not by directly assessing leaf positions in the images. Dedicated software was developed to reduce the noise level in the low signal images produced with the narrow gaps. The accuracy of this quality assurance procedure was tested by introducing known leaf position errors. It was shown that errors in leaf gap as small as 0.01-0.02 cm could be detected, which is certainly adequate to guarantee accurate dose delivery of DMLC treatments, even for strongly modulated beam profiles. Using this method, it was demonstrated that both short and long term reproducibility in leaf positioning were within 0.01 cm (1sigma) for all gantry angles, and that the effect of gravity was negligible.

Calibration↗

PubMed1985

[Biomechanics of intramedullary nailing and its interlocking].

Mechanically an intramedullary nail cannot be conceived of as a nail but rather as a bendable feather subject to longitudinal tension and, to a lesser degree, to transverse pressure. Reaming the medullary canal is necessary for centralizing of the nail as well as for increasing the area of contact with the bone. However, this procedure is detrimental to the bone metabolism, thus reducing its elasticity against torsional forces. The dynamic locking nail-system is more biologic than conventional nailing, with rotatory instability being reduced by additional components, such as transverse screws. By applying static locking only true static weight bearing with crutches, will be ensured but no dynamic mobilisation. Nails with conventional strength and in trefoil leaf formation are superior to other designs. However, an improved angle in the proximal locking is suggested, as this will allow the weight bearing to be increased three to four times.

Biomechanical Phenomena↗