PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “shell”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50Linked to original sources

Survey of shell egg processing plant sanitation programs: effects on egg contact surfaces.

Sanitation standard operating procedures (SSOPs) are an integral component of process control and are often the first step in the implementation of food safety regulations. The objective of this study was to assess and compare the efficacies of sanitation programs used in a variety of shell egg processing facilities. In-line, off-line, and mixed operations were evaluated. Sixteen direct or indirect egg contact surfaces were sampled in various shell egg processing facilities in the southeast United States. Samples were collected at the end of a processing day (POST) and again the next morning before operations began (PRE). Total aerobic plate counts (APCs) were obtained and Enterobacteriacae were enumerated. No significant differences (P > 0.05) between POST and PRE bacterial counts were found for the 16 sampling sites. In general, high APCs were found on the wall of the recirculating water tank both POST and PRE. The APCs for the rewash belt were considerably high for all plants sampled. APCs were also high for the vacuum loaders. APCs for washers and washer brushes were relatively low for most plants sampled. PRE and POST levels of plant sanitation, as determined by direct microbial plating, did not differ significantly. At this point, it is difficult to draw definitive conclusions about how rigid SSOPs should be for the shell egg processing industry.

Animals↗

Identification of Enterobacteriaceae from washed and unwashed commercial shell eggs.

To evaluate the effect of processing on the safety and quality of retail shell eggs, a storage study was conducted with unwashed and commercially washed eggs. This work demonstrated that commercial processing decreased microbial contamination of eggshells. To know which species persisted during storage on washed or unwashed eggs, Enterobacteriaceae isolates were selected and identified biochemically. For each of three replications, shell eggs were purchased from a commercial processing plant, transported back to the laboratory, and stored at 4 degrees C. Once a week for 6 weeks, 12 eggs for each treatment (washed and unwashed control) were rinsed in sterile phosphate-buffered saline. A 1-ml aliquot of each sample was plated onto violet red bile glucose agar with overlay and incubated at 37 degrees C for 24 h. Following incubation, plates were observed for colonies characteristic of the family Enterobacteriaceae. A maximum of 10 isolates per positive sample were streaked for isolation before being identified to the genus or species level using commercially available biochemical strips. Although most of the isolates from the unwashed control eggs belonged to the genera Escherichia or Enterobacter, many other genera and species were identified. These included Citrobacter, Klebsiella, Kluyvera, Pantoea, Providencia, Rahnella, Salmonella, Serratia, and Yersinia. Non-Enterobacteriaceae also recovered from the unwashed egg samples included Xanthomonas and Flavimonas. Very few washed egg samples were contaminated with any of these bacteria. These data provide useful information on the effectiveness of processing in removing microorganisms from commercial shell eggs.

Animals↗

Survey of shell egg processing plant sanitation programs: effects on non-egg-contact surfaces.

To successfully implement a hazard analysis critical control point plan, prerequisite programs are essential. Sanitation standard operating procedures are an important part of such a plan and can reduce contamination levels so that food safety and quality are not adversely affected. Noncontact surfaces in the shell egg processing plants can serve as a reservoir of cross-contamination. The objective of this study was to assess the efficacy of sanitation programs used in a variety of shell egg processing facilities (in-line, off-line, and mixed operations). Fourteen different noncontact surfaces were sampled in nine commercial facilities across the southeastern United States. Non-egg-contact surfaces were defined as those where the shell egg does not come into direct contact with the surface or with the fluid from that surface. Gauze pads soaked in sterile phosphate-buffered saline were used for sampling at the end of a processing day (POST) and again the next morning prior to operations (PRE). Aerobic plate counts (APCs) and numbers of Enterobacteriaceae were determined. No significant differences (P > 0.05) were found between POST and PRE counts for either population recovered from the 14 sampling sites. Only samples from the floor under the farm belts, nest-run loader, washers, and packer heads were reduced by 1 log CFU/ml of rinsate for APCs or Enterobacteriaceae counts. APCs of more than 10(4) CFU/ml of rinsate were recovered from many samples. Highest APCs were found on the floor under the farm belt and on shelves of the nest-run carts. High APCs were found on the wheel surface for off-line carts and on the loading dock floor. Highest Enterobacteriaceae counts were found in samples from the floor, drain, and nest-run egg cart shelves. A lack of significant difference between POST and PRE counts indicates that current sanitation programs could be improved. These data suggest that traffic patterns for the movement of eggs and materials through the plant should be reevaluated so that cross-contamination is reduced.

Animals↗

Impact of commercial processing on the microbiology of shell eggs.

Shell egg microbiology has been studied extensively, but little information is available on how modern U.S. processing conditions impact microbial populations. As regulations are being drafted for the industry, such information can be important for determining processing steps critical to product safety. Five different shell egg surface microbial populations (aerobic bacteria, yeasts and molds, Enterobacteriaceae, Escherichia coli, and Salmonella) were monitored at 12 points along the processing line (accumulator, prewash rinse, washer 1, washer 2, sanitizer, dryer, oiler, scales, two packer head lanes, rewash entrance, and rewash exit). Three commercial facilities were each visited three times, a total of 990 eggs were sampled, and 5,220 microbiological samples were subsequently analyzed. Although variations existed in concentrations of microorganisms recovered from each plant, the patterns of fluctuation for each population were similar at each plant. On average, aerobes, yeasts and molds, Enterobacteriaceae, and E. coli prevalence were reduced by 30, 20, 50, and 30%, respectively, by the end of processing. The microbial concentrations (log CFU per milliliter) in the egg rinse collected from packer head lanes were decreased by 3.3, 1.3, 1.3, and 0.5, respectively, when compared with those of rinses collected from eggs at the accumulator. Salmonella was recovered from 0 to 48% of pooled samples in the three repetitions. Higher concentrations of Salmonella were recovered from preprocessed than from in-process or ready-to-pack eggs. These data indicate that current commercial practices decrease microbial contamination of egg shell surfaces.

Animals↗

Efficacy of electrolyzed water in inactivating Salmonella enteritidis and Listeria monocytogenes on shell eggs.

The efficacy of acidic electrolyzed (EO) water produced at three levels of total available chlorine (16, 41, and 77 mg/ liter) and chlorinated water with 45 and 200 mg/liter of residual chlorine was investigated for inactivating Salmonella Enteritidis and Listeria monocytogenes on shell eggs. An increasing reduction in Listeria population was observed with increasing chlorine concentration from 16 to 77 mg/liter and treatment time from 1 to 5 min, resulting in a maximal reduction of 3.70 log CFU per shell egg compared with a deionized water wash for 5 min. There was no significant difference in antibacterial activities against Salmonella and Listeria at the same treatment time between 45 mg/liter of chlorinated water and 14-A acidic EO water treatment (P > or = 0.05). Chlorinated water (200 mg/liter) wash for 3 and 5 min was the most effective treatment; it reduced mean populations of Listeria and Salmonella on inoculated eggs by 4.89 and 3.83 log CFU/shell egg, respectively. However, reductions (log CFU/shell egg) of Listeria (4.39) and Salmonella (3.66) by 1-min alkaline EO water treatment followed by another 1 min of 14-A acidic EO water (41 mg/liter chlorine) treatment had a similar reduction to the 1-min 200 mg/liter chlorinated water treatment for Listeria (4.01) and Salmonella (3.81). This study demonstrated that a combination of alkaline and acidic EO water wash is equivalent to 200 mg/liter of chlorinated water wash for reducing populations of Salmonella Enteritidis and L. monocytogenes on shell eggs.

Animals↗

The effect on egg-shell thickness of the inclusion of the calcinogenic plant Solanum malacoxylon in the diet of laying hens.

The leaves of the plant Solanum malacoxylon contain 1,25 dihydroxycholecalciferol, the active form of vitamin D. The effect on egg-shell thickness of supplementing the diet of laying hens with a dry powdered preparation of the leaves (DLSM) has been studied. A significnat increase in shell thickness was evident for eggs laid on the second and subsequent days of the DLSM-regimen but nor for those laid during the first 24 hours. It is suggested that the provision of high doses of the vitamin D metabolite in the form of a DLSM supplement may restore calcium binding protein levels in birds approaching the end of the first laying year and hence improve dietary calcium absorption and consequently egg-shell quality.

Animals↗

Egg shell formation by vitelline globules or by uterus. An introspection.

The question of the formation of the egg shell has attracted attention of most of the helminthologists and several different views have been expressed from time to time. The most agreed view which held the vitelline globules responsible for forming precursors of the shell membrane, has now become questionable in view of the fact that there are trematodes in which neither Mehlis' gland nor vitelline glands are present. The authors have demonstrated histochemically and histologically that the proximal part of the uterus has the necessary potentialities to form the egg shell membrane.

Animals↗

[Penetration of Staphylococci through the egg-shell].

Penetration of staphylococci through egg-shell structures into the egg content was studied in 490 eggs. A series of experiments proved that staphylococci were able to penetrate through all egg-shell structures in a short time (of 1 hour) after the contamination. According to the results of these experiments, penetration was affected by the presence of cuticle, different shell porosity and high pH of the egg white.

Animals↗

Pre- and postsynaptic sites for serotonin modulation of GABA-containing neurons in the shell region of the rat nucleus accumbens.

The shell of the nucleus accumbens received a dense serotonergic innervation and contains abundant gamma-aminobutyric acid (GABA)-immunoreactive neurons. Moreover, serotonin (5-hydroxytryptamine: 5-HT) and GABA have been implicated in a variety of common motivational and motor-related functions partially ascribed in this brain area. We used immunoelectron microscopy of antisera directed against 5-HT and GABA in the same section of tissue to examine whether there were cellular substrates that might indicate more specific sites for functional interactions involving these transmitters in the shell region of the rat nucleus accumbens. Immunogold-silver labeling for GABA was localized to perikarya, dendrites, axons and axon terminals, whereas immunoperoxidase labeling for 5-HT was restricted to axons and axon terminals. Approximately half (187/366) of the 5-HT-immunoreactive axon terminals apposed or formed synaptic junctions with postsynaptic neurons. These junctions were mainly of the symmetric-type (83/187) characteristic of inhibitory transmitters, and were equally prevalent on dendrites with and without detectable gold-silver labeling for GABA. Of the 187 5-HT-labeled axon terminals with recognized synaptic contacts, 36% also showed convergence on a common dendrite with a GABA-labeled axon terminal. In addition, 5-HT- and GABA-immunoreactive axon terminals were commonly (83/366) identified in direct apposition to one another. Within a single plane of section, 41% of the apposed GABA-immunoreactive axon terminals formed symmetric-type junctions with dendrites or somata, whereas, the apposed 5-HT-labeled axon terminals rarely showed postsynaptic contacts. These results indicate that 5-HT-containing axon terminals may postsynaptically inhibit GABAergic neurons and their targets within the shell of the rat nucleus accumbens. Additionally, our results strongly suggest that, in this brain region, appositions between 5-HT and GABA axons and axon terminals may facilitate presynaptic interactions between these transmitter systems.

Animals↗

Methamphetamine selectively damages dopaminergic innervation to the nucleus accumbens core while sparing the shell.

Dopaminergic innervation to the nucleus accumbens was investigated following a neurotoxic regimen of methamphetamine (MA) treatment. Four 10 mg/kg doses of MA were administered s.c. to male Sprague-Dawley rats with a 2 h interval between doses. Rectal temperatures were monitored for the induction of MA-induced hyperthermia. Three days or 2 weeks after MA treatment the animals were sacrificed by transcardial perfusion and processed for tyrosine hydroxylase (TH-IR) and glial fibrillary acidic protein immunoreactivity (GFAP-IR). MA treatment produced a severe loss of TH-IR throughout the striatum, including the nucleus accumbens. However, within the nucleus accumbens, there was substantial sparing of TH-IR in the shell, while in the core immunoreactivity was almost entirely lost. Furthermore, astrogliosis, as demonstrated by GFAP-IR, was prevalent in the core but present only in sparse patches in the medial and lateral shell. Thus, dopaminergic innervation to the nucleus accumbens core undergoes degeneration following MA treatment, while innervation to the shell is resistant to the neurodegenerative effects of MA.

Animals↗

Structure of DNA hydration shells studied by Raman spectroscopy.

We have used Raman scattering to study the water O-H stretching modes at approximately 3450 and approximately 3220 cm-1 in DNA films as a function of relative humidity (r.h.). The intensity of the 3220-cm-1 band vanishes as the r.h. is decreased from 98% to around 80%, which indicates that the hydrogen-bond network of water is disrupted in the primary hydration shell (which therefore cannot have an "ice-like" structure). The number of water molecules in the primary hydration shell was determined from the intensity of the approximately 3200-cm-1 band as about 30 water molecules per nucleotide pair. The approximately 3400-cm-1 O-H stretch band was used for determining the total water content, and this band persists at 0% r.h., implying that 5-6 tightly bound water molecules per nucleotide pair remain. The frequency of the approximately 3400-cm-1 O-H stretch mode is lower by 30 to 45 cm-1 in the primary hydration shell compared to free water. The water content as a function of r.h. obtained from these experiments agrees with gravimetric measurements. The disappearance of the approximately 3200-cm-1 band and the shift of the approximately 3400-cm-1 O-H stretch band provide a reliable way of measuring the hydration number of DNA.

DNA↗

Structure of the hydration shells of oligo(dA-dT).oligo(dA-dT) and oligo(dA).oligo(dT) tracts in B-type conformation on the basis of Monte Carlo calculations.

Monte Carlo simulations [(N, V, T)-ensemble] were performed for the hydration shell of poly(dA-dT).poly(dA-dT) in canonical B form and for the hydration shell of poly(dA).poly(dT) in canonical B conformation and in a conformation with narrow minor groove, highly inclined bases, but with a nearly zero-inclined base pair plane (B' conformation). We introduced helical periodic boundary conditions with a rather small unit cell and a limited number of water molecules to reduce the dimensionality of the configuration space. The coordinates of local maxima of water density and the properties of one- and two-membered water bridges between polar groups of the DNA were obtained. The AT-alternating duplex hydration mirrors the dyad symmetry of polar group distribution. At the dApdT step, a water bridge between the two carbonyl oxygens O2 of thymines is formed as in the central base-pair step of Dickerson's dodecamer. In the major groove, 5-membered water chains along the tetranucleotide pattern d(TATA).d(TATA) are observed. The hydration geometry of poly(dA).poly(dT) in canonical B conformation is distinguished by autonomous primary hydration of the base-pair edges in both grooves. When this polymer adopts a conformation with highly inclined bases and narrow minor groove, the water density distribution in the minor groove is in excellent agreement with Dickerson's spine model. One local maximum per base pair of the first layer is located near the dyad axis between adjacent base pairs, and one local maximum per base pair in the second shell lies near the dyad axis of the base pair itself. The water bridge between the two strands formed within the first layer was observed with high probability. But the water molecules of the second layer do not have a statistically favored orientation necessary for bridging first layer waters. In the major groove, the hydration geometry of the (A.T) base-pair edge resembles the main features of the AT-pair hydration derived from other sequences for the canonical B form. The preference of the B' conformation for oligo(dA).oligo(dT) tracts may express the tendency to common hydration of base-pair edges of successive base pairs in the grooves of B-type DNA. The mean potential energy of hydration of canonical B-DNA was estimated to be -60 to -80 kJ/mole nucleotides in dependence on the (G.C) contents. Because of the small system size, this estimation is preliminary.

Base Sequence↗

Synthesis of DL-alanine hollow tubes and core-shell mesostructures.

Three double hydrophilic block copolymers were used as crystal-growth modifiers of DL-alanine to generate amorphous precursor nanoparticles that undergo subsequent mesoscopic transformation to core-shell mesostructures and hollow tubes with quadratic cross-sections. The growth sequence can be stopped at various stages so that a series of intermediates between amorphous core- and crystalline-shell particles and tubes can be obtained. Time-dependent conductivity, TEM, SEM, and environmental scanning electron microscopy (ESEM) measurements were used to obtain a better understanding of the crystallization process, and a formation mechanism for the generation of the tubes is proposed. Na2SO4, NaCl, and NaNO3 as salts differ in their influence on the crystallization behavior of alanine by changing the solubility of alanine and by decreasing the stability of the intermediate particles. Core-shell mesostructures that formed in the dissolution-recrystallization process were captured as the transformation rate was decreased by the addition of copolymers or salts. Hollow tubes with quadratic cross-sections are the final product of the transformation process.

Alanine↗

Manipulation of the morphology of semiconductor-based nanostructures from core-shell nanoparticles to nanocables: the case of CdSe/SiO(2).

The morphology of CdSe/SiO(2) was manipulated from core-shell-structured nanoparticles to nanocables by using a chemical vapor deposition (CVD) process. The growth of nanocables, with cores no more than 20 nm in diameter, is initiated by the formation of core-shell nanoparticles with SiO(2) as matrix and CdSe clusters dispersed inside. After the subsequent vaporization of the SiO(2) matrix, the follow-up CdSe vapor crystallizes with the remaining CdSe clusters as nuclei to form CdSe nanowires as the furnace was cooled to 1200 degrees C. During the controlled cooling of the furnace, the SiO vapor re-deposits to sheathe the nanowires. The thickness of the shell and the diameter of core were successfully controlled. The photoluminescence measurements show that the CdSe/SiO(2) nanocables have strong visible-light emission bands located at 590 and 688 nm, which are attributed to the defects induced by SiO(2) sheaths nanowires and the quantum confinement effect of the CdSe, respectively. The UV/Vis absorption spectra of the naked CdSe nanowires further validate the above-mentioned quantum confinement effect. The deterministic growth of these nanocables is very important for the design of the nanodevices based on them.

Journal Article↗

Comparative analysis of the subcellular and subsynaptic localization of mGluR1a and mGluR5 metabotropic glutamate receptors in the shell and core of the nucleus accumbens in rat and monkey.

Group I metabotropic glutamate receptors (mGluRs) play critical roles in synaptic plasticity and drug addiction. To characterize potential sites whereby these receptors mediate their effects in the ventral striatum, we studied the subcellular and subsynaptic localization of mGluR1a and mGluR5 in the shell and core of the nucleus accumbens in rat and monkey. In both species, group I mGluRs are mainly postsynaptic in dendrites and spines, with rare presynaptic labeling in unmyelinated axons. Minor, yet significant, differences in proportions of specific immunoreactive elements were found between the accumbens shell and the accumbens core in monkey. At the subsynaptic level, significant differences were found in the proportion of plasma membrane-bound mGluR5 labeling between species. In dendrites, spines, and unmyelinated axons, a significantly larger proportion of mGluR5 labeling was bound to the plasma membrane in rats (50-70%) than in monkeys (30-50%). Conversely, mGluR1a displayed the same pattern of immunogold labeling in the two species. Electron microscopic colocalization studies revealed 30% colocalization of mGluR1a and mGluR5 in dendrites and as much as 50-65% in spines in both compartments of the rat accumbens. Both group I mGluRs were significantly expressed in D1-immunoreactive dendritic processes (60-75% colocalization) and spines (30-50%) of striatal projection neurons as well as dendrites of cholinergic (30-70%) and parvalbumin-containing (70-85%) interneurons. These findings highlight the widespread expression of group I mGluRs in projection neurons and interneurons of the shell and core of the nucleus accumbens, providing a solid foundation for regulatory and therapeutic functions of group I mGluRs in reward-related behaviors and drug addiction.

Animals↗

Ultrastructural characteristics of enkephalin-immunoreactive boutons and their postsynaptic targets in the shell and core of the nucleus accumbens of the rat.

The present study compared the ultrastructural morphology of enkephalin-immunoreactive boutons and their postsynaptic targets in different territories of the nucleus accumbens in the rat. The synaptic bouton profiles were identified by antibodies directed against [leu5]enkephalin. Ninety-five percent of the synaptic contacts were symmetric in configuration and the remaining 5% were asymmetric. Axosomatic contacts comprised 6% of all enkephalin-immunoreactive junctions and were distributed equally in all parts of the nucleus. Most (76%) synaptic terminals contacted dendrites but they contacted proportionally fewer dendrites in the shell (71%) than in the core (78%). Moreover, enkephalin-immunoreactive synaptic boutons in the shell (19%) and caudal enkephalin-rich areas (17%) of the core contacted twice as many spines than in the remaining parts of the core (8.5%). In the core, long pallidum-like dendrites were occasionally found ensheathed in enkephalin-immunoreactive terminal boutons. We conclude that the differential arrangement of enkephalinergic contacts in the shell and core could have important functional consequences, especially when considered in relation to other known morphological and neurochemical differences between these regions.

Animals↗

Magneto-optical studies of HgTe/HgxCd1-xTe(S) core-shell nanocrystals.

The synthesis and magneto-optical properties of HgTe nanocrystals capped with HgxCd1-xTe(S) alloyed shells have been investigated. The magneto-optical measurements included the use of optically detected magnetic resonance (ODMR) and circular polarized photoluminescence (CP-PL) spectroscopy. The PL spectra suggest the existence of luminescence events from both the core HgTe and the HgxCd1-xTe(S) shells. The continuous-wave (cw) and time-resolved ODMR measurements revealed that the luminescence at the shell regime is associated with a trap-to-band recombination emission. The electron trap is comprised of a Cd-Hg mixed site, confirming the existence of an alloyed HgxCd1-xTe(S) composition. The ODMR data and the CP-PL measurements together revealed the g-values of the trapped electron and the valence band hole.

Journal Article↗

Surface-enhanced Raman scattering of p-aminothiophenol on a Au(core)/Cu(shell) nanoparticle assembly.

Surface-enhanced Raman scattering (SERS) of p-aminothiophenol (PATP) molecules adsorbed onto assemblies of Au(core)/Cu(shell) nanoparticles is reported. We compare it with the SERS spectrum of PATP adsorbed onto gold nanoparticles: both the absolute and relative scattered intensities of various bands in the two spectra are very different. The difference in relative intensity can be ascribed to chemical effects; the chemical enhancement ratio of the two substrates is approximately 3-5. A theoretical analysis based on a charge-transfer model is carried out, which yields a consistent result and shows that the difference in chemical enhancement is mainly due to the state densities and Fermi levels of the substrates. The difference in absolute intensity originates from electromagnetic (EM) enhancement. EM enhancement of Au(core)/Cu(shell) nanoparticles is unlike that of single-component gold or copper SERS-active substrates. The core/shell particle size for optimal enhancement is about 20 nm in the case of a 632.8 nm incident laser (the size ratio of the core and shell layers is about 0.6).

Journal Article↗