PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Dentin”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources

Effects of air-drying in vitro on human dentine permeability.

The effects of evaporation produced by air blasts of 0, 0.5, 2 or 5 min to dentine in vitro were evaluated by measuring dentine hydraulic conductance before and after each trial. When the tubules were filled with water, even prolonged evaporation had no effect on dentine permeability. Tubules filled with physiological salt solution produced a time-dependent decrease in dentine permeability. Tubules filled with 1.5 per cent albumin in water gave the largest reductions in dentine permeability. These effects were more marked in unetched as opposed to acid-etched dentine. The results suggest that part of the reduction in dentine sensitivity produced clinically by prolonged air blasts may be due to precipitation of organic and inorganic constituents of dentinal fluid at the surface.

Acid Etching, Dental↗

Induction of reparative dentine formation in monkeys by recombinant human osteogenic protein-1.

Osteogenic protein-1 (OP-1, BMP-7), a member of the transforming growth factor-beta supergene family, induces cartilage and bone formation when implanted in intra- and extraskeletal sites in vivo. The human OP-1 gene has been cloned and biologically active recombinant OP-1 homodimers (hOP-1) produced. The amount of bone induced by hOP-1 in vivo is related to the amount of protein implanted. Dentine possesses bone morphogenetic protein (BMP) activity. Impure material from allogenic bone with BMP activity induced reparative dentine formation in dogs. The objective of this study was to determine if the amount of reparative dentine stimulated by hOP-1 is related to the amount of protein utilized in direct pulp-capping experiments. Freshly exposed molar and premolar pulps were treated with varying amounts of a complex comprising hOP-1 and a carrier matrix of purified bovine type-1 collagen powder (CM) moistened with sterile saline. Reparative dentine was present in all hOP-1/CM treated teeth (12 of 15) that remained sealed for the 6 weeks' healing. Substantially more new dentine was present in teeth treated with hOP-1/CM than in those treated with Ca(OH)2 paste and the amount of reparative dentine formed was proportional to the amount of hOP-1/CM (P < 0.05). No reparative dentine formed in collagen carrier or untreated teeth. The appearances of the new tissue suggested that much of the mass of the hOP-1/CM was replaced first by a pulp-like connective tissue, which mineralized to form reparative dentine.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗

Reduction in dentine apposition in rat molars by a high-sucrose diet.

The effects of high-sucrose and high-starch diets on dentine apposition were examined. One group of young Wistar rats (20 rats) received a high-sucrose (43%) diet; for the high-starch group (16 rats), sucrose was replaced with potato flour. The control group (18 rats) received standard laboratory rat food. The onset of dentine formation was marked with tetracycline. After 5 weeks lower molars were sectioned sagittally, and the areas of the dentine apposition and those of the dentinal caries were quantified. Dentine apposition was independent of sex. The high-sucrose diet reduced dentine apposition and induced caries progression. A negative correlation between dentine apposition and caries progression in the molars was found. This study suggests that a high-sucrose diet itself reduces primary dentine apposition.

Animals↗

The relation between long-period incremental markings in dentine and daily cross-striations in enamel in human teeth.

Ground sections of human permanent teeth were chosen where fluorescent labels in the dentine, resulting from repeated doses of tetracycline antibiotic, were unambiguously associated with accentuated markings in the enamel developing at the same time. Counts of daily cross-striations in enamel were continued from one tooth to another in a developmental sequence over a period of some 1200 days such that the time interval between doses of tetracycline could be calibrated. Long-period incremental markings in the dentine, spaced on average between 15 and 30 microns apart (and first described by Andresen in 1898) were easily visible in the coronal dentine when the ground sections were viewed with polarized light. The total number of long-period incremental markings in the dentine between the consecutive fluorescent labels was also counted. A regression plot of daily incremental lines in enamel against long-period lines in dentine demonstrated a regular and consistent relation between the two (r = 0.997) over a 1200-1300-day period. These data support the hypothesis that long-period markings in dentine are in fact regular incremental markings with a constant periodicity in an individual. They also suggest that regular long-period markings in dentine can be used to reconstruct the timing of tooth growth or to retrieve developmental information about dentine formation rates in forensic, archaeological and palaeontological studies with some confidence.

Anti-Bacterial Agents↗

Effects of self-etching primers on dentin.

The effects of self-etching dentin primers on the hardness of dentin was evaluated by determination of the Vickers Hardness of both untreated dentin and dentin treated with different primers. Several experimental primers were prepared by dilution of dicarbonates or their esterified salts with different ratios of HEMA to obtain ratios of 5% and 35% by weight. Methacryloxyethyl succinate (MES) and Methacryloxyethyl phthalate (MEP) experimental primers caused less softening of dentin than did maleic acid diluted with HEMA or a commercial dentin primer (Scotchprep, 3M). A high correlation was observed between the pH of a primer and the hardness of dentin treated with the primer. A correlation was also observed between the hardness of treated dentin and the wall-to-wall polymerization contraction of a light-curing microfilled resin (Silux, 3M).

Acid Etching, Dental↗

Effect of dentin surface roughness on shear bond strength.

The aim of this investigation was to evaluate the effect of dentin surface roughness on the shear bond strength of a dentin bonding agent. Seventy-five dentin samples were divided into five surface preparation groups: (1) 60-grit SiC; (2) 320-grit SiC; (3) 600-grit SiC; (4) 600-grit SiC followed by AI2O3, and (5) 320-grit SiC followed by a #245 carbide bur. The prepared dentin was treated with a dentin primer, and one coat of dentin bonding agent was applied and light-cured for 30 s. Each dentin specimen was mounted in a device with a split Teflon mold (I.D. = 3.5 mm, depth = 5.0 mm). Three increments of a restorative composite were placed, compressed firmly, and light-cured for 30 s in the mold. After 24 h of storage, the bonds were stressed to failure in a mechanical testing machine at a cross-head speed of 0.5 mm/min. Weibull analysis was used to obtain a shape factor and characteristic level for each group. The results showed that, with the possible exception of the 600-grit SiC and AI2O3 group, the grit size used for preparation of dentin specimens for shear bond strength testing in this study did not significantly affect bond strength.

Dental Bonding↗

The optimum combination of dentin bonding systems.

The efficacy of dentin bonding systems composed of a commercial or an experimental dentin cleanser, a dentin primer, and an intermediate resin was examined by measurement of the wall-to-wall polymerization contraction gap. Light-activated composites in a cylindrical dentin cavity were prepared in exposed dentin of the proximal surface of the extracted human premolar. The combination of a dentin cleanser of neutralized 0.5 mol/L EDTA, a dentin primer of 35% hydroxyethyl methacrylate (HEMA) or 35% HEMA containing 5% glutaraldehyde and a commercial intermediate resin (Clearfil New Bond, Kuraray Co., Osaka, Japan; Pyrofil Light Bond, Sankin Co., Osaka, Japan) was effective in compensating for the contraction stress of a light-activated composite and for obtaining marginal integrity between the composite and the dentin cavity wall.

Composite Resins↗

Stress relaxation properties of human dentin.

OBJECTIVES: This study compared the stress relaxation properties of moist and air-dried human dentin to determine if air drying modifies this mechanical property. METHODS: Cylindrical dentin specimens, prepared from human canine and maxillary incisor teeth, were subjected to a controlled compressive stress applied at a constant strain rate to a predetermined maximum value, and the stress relaxation response recorded. Groups of moist and air-dried specimens were tested at both low and high stress. After a period of 1 wk, the incisor specimens were retested. RESULTS: The dentin exhibited a linear stress relaxation with the logarithm of time. Air-dried dentin consistently demonstrated a decreased stress relaxation. When subjected to a second high load, the air-dried dentin displayed significantly slower stress relaxation. Air-dried incisor dentin was found to be significantly stiffer than air-dried canine dentin. SIGNIFICANCE: These data suggest that the stress relaxation properties of human dentin are modified by air drying and by previous exposure to a constant compressive strain.

Biomechanical Phenomena↗

Influence of filler addition to bonding agents on shear bond strength to bovine dentin.

OBJECTIVES: The purpose of this study was to investigate the influence of adding filler particles to a bonding agent on dentin bond strength and of the temperature change during curing in order to determine the optimum filler level for an experimental bonding agent. METHODS: Experimental light-cured bonding agents with microfiller (average size: 0.05 micrometers) content of 0, 10, 20, 30, 40, 50, 60, and 70 wt% were used with the Imperva Bond / Lite-Fil II A (Shofu) restorative material. Bovine incisors were mounted in self-cured resin, and the facial surfaces were prepared with 600-grit SiC paper. After dentin surface pretreatment with dentin primer, experimental bonding agents were applied to the dentin surface and bonded with resin composite. Ten samples per test group were stored in 37 degrees C water for 24 h, then shear tested at 1.0 mm/min. The temperature change of the bonding agent was monitored during the exthothermic polymerization reaction according to the method of ISO standard #4049. The peak temperature and the time required to reach peak temperature were recorded. RESULTS: Bond strength to dentin and the temperature change were greatly affected by the filler level. Maximum dentin bond strength (14.3 +/- 2.3 MPa) was obtained with a filler level of 10 wt% and decreased with filler level higher than 30 wt% (10.4 +/- 1.7 MPa - 5.3 +/- 2.6 MPa). Peak temperature decreased and the time required to reach peak temperature increased with the higher filler levels. There were strong correlations between the bond strength and temperature change of experimental bonding agents. SIGNIFICANCE: The initial setting behavior of bonding agents containing filler particles may be one of the important factors influencing dentin bond strength. When bonding agents with filler particles are used, it is important to determine if optimum filler levels exist in order to optimize the dentin bond strength.

Analysis of Variance↗

An in vitro study of the role of dentine in moderating the cytotoxicity of zinc oxide eugenol cement.

The protective role of different dentine fractions and of dentine slices in moderating the cytotoxicity of zinc oxide eugenol (ZOE) was investigated. The collagen fraction of dentine powder provided increased protection over intact powder. Slices of dentine offered greater protection probably by providing a physical barrier to the diffusion of eugenol which may also bind to the contents of the dentine tubules. With increasing thickness of the dentine slices this protection was increased. ZOE stimulated calcium release from dentine but in view of the low levels attained it is unlikely that this process has any significant effect on the protective role of dentine.

Animals↗

Water content in experimental dentine primers to minimize the contraction gap width of a light-cured resin composite.

OBJECTIVES: The effect of water content in experimental dentine primers consisting of an aqueous solution of either glyceryl methacrylate (GM) or hydroxyethyl methacrylate (HEMA), and in experimental self-etching dentine primers composed of methacryloxyethyl hydrogen phenyl phosphate (Phenyl-P), was evaluated by measuring the wall-to-wall polymerization contraction gap width of a commercial light-activated resin composite filled in a cylindrical dentine cavity prepared in an extracted human molar. METHODS: A commercial light-cured dentine bonding agent was applied to the cavity after cleaning with EDTA and priming with either GM or HEMA, or after self-etching priming by Phenyl-P diluted in either GM or HEMA solution. RESULTS: In the GM and HEMA solutions, the gap width was minimized when the water content was 65 wt% even though gap formation could not be prevented by HEMA solution. With the self-etching dentine primers, gaps could not be observed under the light microscope with 16 wt% Phenyl-P diluted in 35 wt% GM or HEMA or with 20 wt% Phenyl-P diluted in 20 wt% GM or HEMA. CONCLUSION: The water content in both the experimental dentine primers and the self-etching dentine primers which yielded the minimum contraction gap width for the resin composite in the dentine cavity was approximately 60 wt%.

Composite Resins↗

A comparison between the occluding effects of the Nd:YAG laser and the desensitising agent sensodyne on permeation through exposed dentinal tubules of endodontically treated teeth: an in vitro study.

OBJECTIVE: Dentine hypersensitivity may occur due to loss of covering enamel and/or loss of cementum after gingival recession, resulting in exposure of cervical dentine and patency of dentinal tubules. The effect of thermally cooled pulsed neodymium:yttrium-aluminium-garnet (Nd:YAG) laser on the permeability and structural appearance of the root canal wall was investigated in vitro. The aim of this study was to compare the occluding effect of Nd:YAG laser with that of sensodyne on exposed dentine. MATERIAL AND METHODS: Forty freshly extracted human maxillary anterior teeth were collected at random. Root canal obturations were performed using master apical file no. 60 k-type for obturated teeth. All teeth were stored in 100% humidity at 37 degrees C for 48h to allow time for the sealer to set. Dentine of 35 teeth was exposed by removing the cementum, and the remaining five teeth represented a negative control group. Specimens were examined using stereomicroscopy to show the surface topography of the dentine substrate before and after treatment with Nd:YAG laser or sensodyne. RESULTS: A double-blind technique was used when taking measurements of ink penetration (in mm) for each group. Teeth treated by Nd:YAG laser showed the least ink penetration, followed by teeth treated by sensodyne. The positive control group demonstrated complete ink penetration and the negative control group showed no ink penetration. Stereomicroscopic examination of specimens treated with Nd:YAG laser showed deposition on the dentinal surface, and specimens treated with sensodyne showed partial deposition. Untreated specimens were free of deposition and the tubules remained patent. CONCLUSION: There is no significant difference in the occluding effect of Nd:YAG laser and sensodyne toothpaste. Both treatments have a promising effect on the reduction of permeation through exposed dentinal tubules. However, the occluding effect of Nd:YAG laser occurs within seconds whereas that of sensodyne takes at least 3 weeks.

Analysis of Variance↗

Protective effect of the in situ pellicle on dentin erosion - an ex vivo pilot study.

AIM: The acquired pellicle is well known as an anti-erosive proteinaceous layer on enamel, but its protective properties on dentin have not been investigated in detail until now. The aim of the present ex vivo study was to evaluate the erosive effects on pellicle coated dentin. METHODS: Bovine dentin slabs were exposed to the oral cavity of one subject for 120 min for in situ pellicle formation. Subsequently, the slabs were incubated with HCl (pH 2.3) in vitro for 5 min and erosive calcium-release was measured photometrically. In addition, the acid treated specimens were evaluated by transmission electron microscopy (TEM). Pellicle free samples served as controls. RESULTS: Calcium erosion from the pellicle coated dentin slabs amounted to 23.5+/-2.9 microg Ca/min (pellicle free samples: 32.2+/-4.2 microg Ca/min). The difference was statistically significant (p < or = 0.05). In pellicle coated as well as in uncoated dentin samples, TEM-evaluation showed a demineralised dentinal surface layer which thickness ranged between 3 and 6 microm. The pellicle itself was partially dissolved but not removed by hydrochloric acid treatment. CONCLUSION: The protective properties of the acquired pellicle against an erosive challenge of the dentinal surface are limited. The dentinal pellicle functions like an ion permeable network rather than a barrier.

Adult↗

The in vitro failure of all-ceramic crowns and the connector area of fixed partial dentures using bilayered ceramic specimens: the influence of core to dentin thickness ratio.

AIMS: To assess the effect of core to dentine thickness ratio on the bi-axial flexure strength and fracture mode and failure origin using bilayered ceramic specimens as an in vitro assessment for all-ceramic crowns and the connector area of fixed partial dentures (FPDs). METHODS: Sets of 30 bilayered composite discs, with a core layer thickness of 1mm and with core to dentine thickness ratios of 2:1, 1:1 and 1:2, were tested in bi-axial flexure with both the reinforcing core and veneering dentine loaded in tension. Mean flexure strengths, standard deviations and associated Weibull moduli (m) were determined. Optical microscopy was employed for identification of the fracture mode and failure origin for the failure all-ceramic crowns and the connector area of FPDs. RESULTS: For a core thickness of 1mm the core to dentine thickness ratio failed to influence the bi-axial flexure strength data when both the reinforcing core and veneering dentine porcelain were tested in tension. The number of fracture fragments, frequency of occurrence of specimen delaminations, Hertzian cone formations and sub-critical radial cracking in the bilayered dental ceramic composite disc-shaped specimens were dependent on the core to dentine thickness ratio and the surface loaded in tension. SIGNIFICANCE: The fracture mode and failure origin in bilayered ceramics tested to represent the failure mode of all-ceramic crowns and FPDs was dependent upon the core to dentine thickness ratio employed. However, the conventional wisdom regarding bilayered ceramic specimens with core thicknesses greater than 1mm are not followed when the core thickness was reduced to 1mm since the fracture resistance was not dependent on the core to dentine thickness ratio.

Aluminum↗

SEM-EDX study of prepared human dentine surfaces exposed to gingival retraction fluids.

OBJECTIVES: To evaluate the effects of gingival retraction fluids (GRF) on prepared dentine surfaces, and to test the null-hypothesis that prior exposure of dentine surfaces for prolonged period to any of the fluids evaluated does not influence acid-etching of the exposed surfaces. METHODS: The investigation was carried out using SEM and energy-dispersive X-ray analysis (EDX). The GRF studied were Hemodent (HMDT), Astringedent (AST) and Ultradent buffered 25% Aluminium Chloride (ULTB). Longitudinal sections of 220-grit ground dentine surfaces were exposed to GRF for 0.5-, 1-, 2- and 5-min (n=4 each). Another group of samples was produced by 20s application of 35% phosphoric acid (PA) on GRF-pretreated dentine. Control samples were not exposed to GRF. Differences in etching effect-a function of the Ca-contents detected by EDX, were analysed using Friedman's and Wilcoxon's rank test (P<0.05). RESULTS: The SEM demonstrated the presence of a relatively non-porous amorphous dentine matrix, but many of the dentine tubule orifices remained occluded. Granular precipitates, which remained even after acid-etching, were noted on surfaces exposed to Hemodent for 5 min. Characteristic crystal growth was observed on surfaces exposed to Astringedent for 1- or 2-min prior to acid-etching. The EDX data demonstrated that there were differences in resulting Ca-content; ULTB >AST>HMDT>ULTB+PA>HMDT+PA>AST+PA>PA, but AST and HMDT were not significantly different. CONCLUSIONS: The exposure of dentine prepared surfaces to these three GRF altered its morphology and reduced the dentine's susceptibility to acid-etching, thus the null-hypothesis is rejected.

Acid Etching, Dental↗

Impact of the acid flow rate on dentin erosion.

OBJECTIVE: The study aimed to evaluate the erosive effects of acids flowing with different velocities and duration on dentin previously pre-treated with distilled water or human saliva. METHODS: Bovine dentin surfaces were submitted to a 10 min demineralisation with hydrochloric or citric acid (pH 2.3, 37 degrees C) in an artificial mouth at flow rates of 3, 2.25, 1.5, 0.75 or 0.15 ml/min or in 30 ml of the respective acid without movement (each subgroup n=16 specimens). Prior to the demineralisation, half of the specimens of each group were either pre-treated with distilled water or human saliva for 120 min. After 2, 5 and 10 min demineralisation, profilometric traces of dentin loss were performed perpendicular to the direction of acid flow at three sites (A-C) with intervals of 500 microm. The first profile (A) was taken in a distance of 1.5 mm from the acid starting to flow over the sample. Thus, median dentin loss at each site was calculated and statistically analysed by five-way ANOVA. RESULTS: Dentin loss increased with increasing acid flow rate and demineralisation time and was higher for demineralisation with citric acid compared to hydrochloric acid. For given flow rates of 0.15 to 3 ml/min, measurement of dentin loss yielded highest values for site A and decreasing values for sites B and C. For all groups, no significant differences of dentin loss were observed between specimens pre-treated with distilled water or human saliva. CONCLUSION: Under the conditions of this study, both duration of demineralisation and acid flow rate but not pre-treatment with distilled water or saliva influence the extent of dentin erosion.

Adult↗

Residual dentin thickness in bifurcated maxillary premolars after root canal and dowel space preparation.

Residual dentin thickness in 25 extracted bifurcated maxillary premolars after canal and Parapost preparation was assessed using acrylic muffle, after embedding in polyester resin and sectioned horizontally. After each procedure, the residual dentin thickness was compared to the original dentin thickness at eight aspects in three root levels. Residual dentin thickness measurements were calculated using photographs and a Digitizer. In the lingual aspect, the original dentin thickness averaged 0.99 mm (coronal slice) and 0.78 mm (middle slice). Dentin removal after dowel preparation was 31%. Three-way ANOVA with repeated measures was used. The difference in residual dentin thickness was highly significant regarding procedure (canal and dowel preparation, p < 0.0001), slice (middle, coronal, p < 0.0001), and the eight aspects (p < 0.0001). This in vitro study emphasizes the minimal dentin width of the buccal root, especially towards the bifurcation. Thus, dowels should be avoided in this root.

Analysis of Variance↗

Marginal leakage of composite resin restorations in combination with dentinal and enamel bonding agents.

Marginal leakage is a cause of failure of composite resin restorations. The effect of two enamel and two dentin bonding agents on marginal leakage alongside composite resins was assessed and compared in enamel and dentinal cavities. Cavities, one in buccal enamel and the other in cervical dentin, were prepared in each of 350 extracted sound human premolar teeth and randomly assigned to combinations of bonding agents and composite resins. After insertion the restorations were polished and the restored teeth were stored in distilled water and thymol at 20 degrees C for 28 days. This was followed by thermal stressing (15 degrees C and 45 degrees C) for 24 hours with a dip cycle of 30 seconds, whereafter a marginal leakage test was performed. The results showed that in enamel cavities, the bonding agents Enamelbond, Heliobond, and Scotchbond significantly reduced marginal leakage compared with Dentin-Adhesit. In the dentinal cavities, Dentin-Adhesit and Scotchbond reduced marginal leakage compared with Enamelbond and Heliobond. No significant difference was noted in the sealing ability of Dentin-Adhesit and Scotchbond. In dentin the P10/Dentin-Adhesit, and Silar/Scotchbond combinations sealed significantly better than P10/Enamelbond.

Acrylic Resins↗