SEARCH · PubMed Health

Results for “Spectroscopy, Fourier Transform Infrared”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources

PubMed1993

Fluoridated carbonatoapatite in the intermediate layer between glass ionomer and dentin.

The intermediate layer between a glass ionomer restoration and dentin was examined morphologically by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). SEM showed strong bonding between the dentin and glass ionomer and formation of an intermediate layer between them. FTIR spectra of successive scrapings through the ionomer/dentin interface zone showed that the intermediate layer is composed primarily of mineral fluoridated carbonatoapatite. The presence of this sparingly soluble mineral at the interface between the tooth and the restoration may provide high resistance to secondary caries and may, thus, be of great clinical importance.

Apatites↗

PubMed2006

Monosaccharide composition, chain length and linkage type influence the interactions of oligosaccharides with dry phosphatidylcholine membranes.

Sugars play an important role in the desiccation tolerance of most anhydrobiotic organisms and disaccharides have been extensively investigated for their ability to stabilize model membranes in the dry state. Much less is known about the ability of oligosaccharides to protect dry membranes. However, it has been shown that different structural families of oligosaccharides have different efficacies to interact with and protect membranes during drying. Here, we have compared three families of linear oligosaccharides (fructans, malto-oligosaccharides, manno-oligosaccharides) for their chain-length dependent lyoprotective effect on egg phosphatidylcholine liposomes. We found increased protection with chain length for the fructans, a moderate decrease in protection with chain length for malto-oligosaccharides, and a strong decrease for manno-oligosaccharides. Using Fourier-transform infrared spectroscopy and differential scanning calorimetry, we show that the degree of lyoprotection of the different sugars is closely related to their influence on the gel to liquid-crystalline phase behavior of the dry membranes and to the extent of H-bonding to different groups (C=O, P=O, choline) in the lipids. Possible structural characteristics of the different oligosaccharides that may determine the extent to which they are able to interact with and protect membranes are discussed.

Calorimetry, Differential Scanning↗

PubMed2005

Antibacterial activity of cerein 8A, a bacteriocin-like peptide produced by Bacillus cereus.

The mode of action of cerein 8A, a bacteriocin produced by the soil bacterium Bacillus cereus 8A, was investigated. The effect of cerein 8A was tested against Listeria monocytogenes and a bactericidal effect at 400 arbitrary units (AU)/ml was observed. In addition, cerein 8A was bactericidal against Bacillus cereus at 200 AU/ml, and inhibited the growth of Escherichia coli and Salmonella Enteritidis. Stronger inhibition of these gram-negative bacteria was achieved when the chelating agent EDTA was added together with bacteriocin. The effect of cerein 8A on B. cereus and L. monocytogenes was also investigated by Fourier transform infrared spectroscopy (FTIR). Treated cells had an important frequency increase at 2920 cm-1 and a decrease at 1400 cm-1, corresponding to assignments of fatty acids. Transmission electron microscopy showed damaged cell walls and loss of protoplasmic material. These results suggest that the mode of action of cerein 8A is to interfere with cell membranes and the cell wall.

Anti-Bacterial Agents↗

PubMed2004

Dispersion of functional tetraphenylporphyrin-ligated metal into ultra-thin flexible acrylate films. 1. Preparation of thin films.

As functional metal complexes, copper phthalocyanine (CuPc) and Cobalt (II) meso-tetraphenylporphyrin (CoTPP) were chosen to prepare metal complex/polymer hybrid thin films which were prepared by metal complex sublimation and reactive monomer evaporation onto the glass substrate in the bell jar reactor in vacuum conditions. The polarized transmission micrograph images show that the film deposited at 80 degrees C contains uniformly dispersed tiny grains and the film deposited at 30 degrees C is amorphous and homogeneous. As the deposition rate increases, the crystalline clusters were found and were dispersed uniformly. Those crystalline clusters are not to be developed by recrystallization process. Deposited metal complex/acrylate hybrid thin films were in situ photopolymerized. The kinetics of photopolymerization was investigated by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). The thickness of the films was about 200 nm. The reactive monomer acts as a solvent to avoid the recrystallization of metal complexes and to have two-compositional continuous phase. The percent of metal complex can be adjusted up to 60% by controlling the metal complex sublimation rate. A good achievement in the uniformity and continuity of the film matrix has been made and the recrystallization of metal complex in the hybrid films has not been observed.

Acrylates↗

PubMed2006

Comparative analysis of the heat stable proteome of radicles of Medicago truncatula seeds during germination identifies late embryogenesis abundant proteins associated with desiccation tolerance.

A proteomic analysis was performed on the heat stable protein fraction of imbibed radicles of Medicago truncatula seeds to investigate whether proteins can be identified that are specifically linked to desiccation tolerance (DT). Radicles were compared before and after emergence (2.8 mm long) in association with the loss of DT, and after reinduction of DT by an osmotic treatment. To separate proteins induced by the osmotic treatment from those linked with DT, the comparison was extended to 5 mm long emerged radicles for which DT could no longer be reinduced, albeit that drought tolerance was increased. The abundance of 15 polypeptides was linked with DT, out of which 11 were identified as late embryogenesis abundant proteins from different groups: MtEm6 (group 1), one isoform of DHN3 (dehydrins), MtPM25 (group 5), and three members of group 3 (MP2, an isoform of PM18, and all the isoforms of SBP65). In silico analysis revealed that their expression is likely seed specific, except for DHN3. Other isoforms of DNH3 and PM18 as well as three isoforms of the dehydrin Budcar5 were associated with drought tolerance. Changes in the abundance of MtEm6 and MtPM25 in imbibed cotyledons during the loss of DT and in developing embryos during the acquisition of DT confirmed the link of these two proteins with DT. Fourier transform infrared spectroscopy revealed that the recombinant MtPM25 and MtEm6 exhibited a certain degree of order in the hydrated state, but that they became more structured by adopting alpha helices and beta sheets during drying. A model is presented in which DT-linked late embryogenesis abundant proteins might exert different protective functions at high and low hydration levels.

Desiccation↗

PubMed2003

Light-emitting diode curing: influence on selected properties of resin composites.

OBJECTIVE: Two recently marketed light-emitting diode polymerization units were compared with a conventional halogen curing unit. Selected properties of resin composites polymerized with the three curing units were determined. METHOD AND MATERIALS: Three different brands of resin composite were used in the investigation. The properties that were determined were flexural strength and modulus, determined in three-point bending tests; depth of polymerization, assessed by removal of uncured material after irradiation; polymerization contraction, evaluated with the bonded-disk method; and degree of conversion, measured by Fourier transform infrared spectroscopy. RESULTS: The properties of resin composites polymerized with light-emitting diode curing units were equal or inferior to properties obtained after halogen light curing. CONCLUSION: Although several properties with some combinations of resin composite and light-emitting diode curing unit were inferior to properties obtained with the halogen curing unit, both the flexural strength and the depth of polymerization fulfilled the requirements set by the International Standards Organization.

Analysis of Variance↗

PubMed2007

One step processing of aminofunctionalized gate oxides.

A plasma discharge process has been developed that allows the growth of biosensor gate oxides with adapted surface properties for the direct application of biomolecular immobilization cascades. The process involves an accurate selection of processing conditions, mainly, low temperature evaporation of (3-aminopropyl)triethoxysilane (APTS) and dynamic power and flow conditions. Room temperature evaporation of APTS was achieved by designing a vessel with an internal capillary network. The initial high power (100 W) plasma conditions were replaced by milder molecular fragmentation (50 W, 25 W) in a pure Ar discharge. Under these conditions the thin SiO(2) layers presented graded properties with a denser layer at the Si (100) interface and a hybrid organic-inorganic structure at the surface. The chemistry of the films was analysed by Fourier transformed infrared spectroscopy (FTIR) and Rutherford backscattering spectroscopy combined with elastic recoil detection analysis (RBS, ERDA), which confirmed the presence of the SiO(2) and organic phases. Contact angle measurements indicate the higher contribution of the basic polar component to the surface free energy. Furthermore, the higher affinity of the surface towards biomolecular immobilization was confirmed by fluorescence microscopy. Finally, penetration of nitrobenzaldehyde was obtained by application of a molecular permeation method evaluated by UV-vis spectroscopy onto fused silica substrates.

Biosensing Techniques↗

PubMed2002

Specific effects of fructo- and gluco-oligosaccharides in the preservation of liposomes during drying.

The fructan family of oligo- and polysaccharides is a group of molecules that have long been implicated as protective agents in the drought and freezing tolerance of many plant species. However, it has been unclear whether fructans have properties that make them better protectants for cellular structures than other sugars. We compared the effects of fructans and glucans on membrane stability during air-drying. Although glucans of increasing chain length were progressively less able to stabilize liposomes against leakage of aqueous content after rehydration, fructans showed increased protection. On the other hand, glucans became more effective in protecting liposomes against membrane fusion with increasing chain length, whereas fructans became less effective. Fourier transform infrared spectroscopy showed a reduction of the gel to liquid-crystalline phase transition temperature (T(m)) of air-dried liposomes by approximately 25 degrees C in the presence of sucrose and maltose. For the respective pentasaccharides, the reduction of T(m) of the lipids was 9 degrees C lower for samples containing fructan than for those containing glucan, indicating increased sugar--membrane interactions for the fructan compared to the glucan. A reduced interaction of the longer-chain glucans and an increased interaction of the respective fructans with the phospholipid head groups in the dry state was also indicated by dramatic differences in the phosphate asymmetric stretch region of the infrared spectrum. Collectively, our data indicate that the fructo-oligosaccharides accumulated in many plant species under stress conditions could indeed play an important role in cellular dehydration tolerance.

Cichorium intybus↗

PubMed1998

Conformational effect of phosphorylation on T cell receptor/CD3 zeta-chain sequences.

The effect of tyrosine-phosphorylation on the conformation of three tyrosine-based immunoreceptor activation motifs, zeta(69-86), zeta(106-126), and zeta(138-155), located in the T cell receptor/CD3 zeta-chain was investigated. Circular dichroism and Fourier-transform infrared spectroscopy of the nonphosphorylated and phosphorylated fragments gave evidence that phosphorylation can alter the secondary structure of the peptides. The most significant--alpha-helix to beta-sheet--conformational change was observed in the case of the zeta(138-155) peptide sequence which may be relevant to recognition by Src homology 2 (SH2) domains of signaling proteins.

Amino Acid Sequence↗

PubMed2006

Polyelectrolyte multilayers with a tunable Young's modulus: influence of film stiffness on cell adhesion.

Mechanical properties of model and natural gels have recently been demonstrated to play an important role in various cellular processes such as adhesion, proliferation, and differentiation, besides events triggered by chemical ligands. Understanding the biomaterial/cell interface is particularly important in many tissue engineering applications and in implant surgery. One of the final goals would be to control cellular processes precisely at the biomaterial surface and to guide tissue regeneration. In this work, we investigate the substrate mechanical effect on cell adhesion for thin polyelectrolyte multilayer (PEM) films, which can be easily deposited on any type of material. The films were cross linked by means of a water-soluble carbodiimide (EDC), and the film elastic modulus was determined using the AFM nanoindentation technique with a colloidal probe. The Young's modulus could be varied over 2 orders of magnitude (from 3 to 400 kPa) for wet poly(L-lysine)/hyaluronan (PLL/HA) films by changing the EDC concentration. The chemical changes upon cross linking were characterized by means of Fourier transform infrared spectroscopy (FTIR). We demonstrated that the adhesion and spreading of human chondrosarcoma cells directly depend on the Young's modulus. These data indicate that, besides the chemical properties of the polyelectrolytes, the substrate mechanics of PEM films is an important parameter influencing cell adhesion and that PEM offer a new way to prepare thin films of tunable mechanical properties with large potential biomedical applications including drug release.

Carbodiimides↗

PubMed1997

Incorporation of antibacterial monomer MDPB into dentin primer.

The polymerizable monomer methacryloyloxydodecylpyridinium bromide (MDPB) shows antibacterial activity when immobilized in a resin-based material. In this study, the antibacterial effect of a dentin primer incorporating MDPB was investigated. The influence of incorporation of MDPB on bond strength to dentin and on the curing performance of the adhesive system was also evaluated. Experimental primers were prepared by addition of MDPB into a proprietary primer at 1, 2, or 5%. Antibacterial effects of experimental primers were compared with those of control primer and two other proprietary primers by an agar disc-diffusion method and bactericidal activity test. Experimental primers produced greater inhibition zones against Streptococcus mutans, Actinomyces viscosus, and Lactobacillus casei than any of three proprietary primers, and inhibition increased as the concentration of MDPB was increased. Bactericidal activity of MDPB-containing primers against Streptococcus mutans was greater than those of the other three primers, with incorporation of MDPB at 5% showing complete killing of bacteria after 30 s contact. No decrease in tensile bond strength was observed for materials containing MDPB. On the contrary, the primer incorporating 1 and 2% MDPB showed higher bond strength than all the others, including the control (p < 0.05). When the degree of conversion of the complex of primer and adhesive resin was determined with Fourier Transform Infrared Spectroscopy, there were no significant differences between any of the experimental primers and the control (p > 0.05). These results indicate that incorporation of the antibacterial monomer MDPB enhanced the antibacterial effect of a proprietary dentin primer before curing, and had no adverse influence on bond strength to dentin and curing of the adhesive system.

Actinomyces viscosus↗

PubMed2003

Spectroscopic characterization of N(2)O aggregates: from clusters to the particulate state.

Collisional cooling is used to generate N(2)O particles with radii ranging from the subnanometer to the submicrometer region. The vibrational dynamics of the aggregates is studied by Fourier transform infrared spectroscopy. In the region of the stretching fundamentals and combination bands, the infrared spectra of the particles exhibit characteristic size-dependent features. For the very small particles, the results obtained from collisional cooling are compared for the first time with corresponding results from supersonic jet expansions. It turns out that with both methods very similar clusters are generated. A pronounced temperature dependence of a combination band maximum in the collisional cooling cell spectra is found. This correlation is exploited to estimate cluster temperatures in supersonic jet spectra.

Nitrous Oxide↗

PubMed2003

In vivo dissolution behavior of various RF magnetron-sputtered Ca-P coatings on roughened titanium implants.

RF magnetron sputter deposition was used to produce 0.1, 1.0 and 4.0 microm thick Ca-P coatings on TiO(2)-blasted titanium discs. Half of the as-sputtered coated specimens were subjected to an additional infrared heat treatment for 30s at 425-475 degrees C. X-ray diffraction demonstrated that infrared radiation changed the amorphous 4 microm sputtered coatings into an amorphous-crystalline structure, while the amorphous 0.1 and 1 microm changed in a crystalline apatite structure with the presents of tetracalciumphosphate as a second phase. Scanning electron microscopically examination of the sputtered coatings revealed that annealing of the 4 microm thick coatings resulted in the appearance of small cracks. Subsequently, the discs were implanted subcutaneous into the back of rabbits. After 1, 4, 8 and 12 weeks of implantation, the implants were retrieved and prepared for histological and physicochemical evaluation. Histological evaluation revealed that the tissue response to all coated implants was very uniform. A very thin connective tissue capsule surrounded all implants. The capsule was usually free of inflammatory cells. At the interface, there was a close contact between the capsule and implant surface and no inflammatory cells were seen. Physicochemical evaluation showed that the 0.1 and 1 microm thick amorphous coatings had disappeared within 1 week of implantation. On the other hand, the 4 microm thick amorphous phase disappeared during the implantation periods, which was followed by the precipitation of a crystalline carbonate apatite. Further, at all implantation periods the heat-treated 1 and 4 microm thick coatings could be detected. Occasionally, a granular precipitate was deposited on the heat-treated 4 microm thick coating. Fourier transform infrared spectroscopy showed the formation of carbonate apatite (CO(3)-AP) on the 4 microm thick amorphous coating and on the heat-treated specimens. On basis of our findings, we conclude that 1 microm thick heat-treated Ca-P sputter coating on roughened titanium implants appear to be of sufficient thickness to show bioactive properties, under in vivo conditions.

Animals↗

PubMed2003

Influence of surface characteristics on the stability of Cryptosporidium parvum oocysts.

Microelectrophoresis is a common technique for probing the surface chemistry of the Cryptosporidium parvum oocyst. Results of previous studies of the electrophoretic mobility of C. parvum oocysts in which microelectrophoresis was used are incongruent. In this work we demonstrated that capillary electrophoresis may also be used to probe the surface characteristics of C. parvum oocysts, and we related the surface chemistry of C. parvum oocysts to their stability in water. Capillary electrophoresis results indicated that oocysts which were washed in a phosphate buffer solution had neutrally charged surfaces. Inactivation of oocysts with formalin did not influence their electrophoretic mobility, while oocyst populations that were washed in distilled water consisted of cells with both neutral and negative surface charges. These results indicate that washing oocysts in low-ionic-strength distilled water can impart a negative charge to a fraction of the oocysts in the sample. Rapid coagulation experiments indicated that oocysts did not aggregate in a 0.5 M NaCl solution; oocyst stability in the salt solution may have been the result of Lewis acid-base forces, steric stabilization, or some other factor. The presence of sucrose and Percoll could not be readily identified on the surface of C. parvum oocysts by attenuated total reflectance-Fourier transform infrared spectroscopy, suggesting that these purification reagents may not be responsible for the stability of the uncharged oocysts. These findings imply that precipitate enmeshment may be the optimal mechanism of coagulation for removal of oocysts in water treatment systems. The results of this work may help elucidate the causes of variation in oocyst surface characteristics, may ultimately lead to improved removal efficiencies in full-scale water treatment systems, and may improve fate and transport predictions for oocysts in natural systems.

Animals↗

PubMed1996

Prediction of the secondary structure of HIV-1 gp120.

The secondary structure of HIV-1 gp120 was predicted using multiple alignment and a combination of two independent methods based on neural network and nearest-neighbor algorithms. The methods agreed on the secondary structure for 80% of the residues in BH10 gp120. Six helices were predicted in HIV strain BH10 gp120, as well as in 27 other HIV-1 strains examined. Two helical segments were predicted in regions displaying profound sequence variation, one in a region suggested to be critical for CD4 binding. The predicted content of helix, beta-strand, and coil was consistent with estimates from Fourier transform infrared spectroscopy. The predicted secondary structure of gp120 compared well with data from NMR analysis of synthetic peptides from the V3 loop and the C4 region. As a first step towards modeling the tertiary structure of gp120, the predicted secondary structure may guide the design of future HIV subunit vaccine candidates.

Algorithms↗

PubMed2005

Electrosynthesis and analytical characterization of PMMA coatings on titanium substrates as barriers against ion release.

The performance of polyacrylic coatings as barrier films against corrosion of titanium-based orthopaedic implants was investigated. In particular, poly(methyl methacrylate) (PMMA) was electrosynthesized on titanium substrates by electro-reductive processes from aqueous monomer solutions. The obtained PMMA coatings were characterized by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The effect of an annealing treatment on the morphology of coatings with respect to uniformity and porosity of films was assessed by scanning electron microscopy (SEM). An inductively coupled plasma-mass spectrometry (ICP-MS) technique was used for ion concentration measurements in ion release tests performed on TiAlV sheets modified with PMMA coatings (annealed and unannealed). Results indicated that the annealing process produces coatings with considerable anticorrosion performances.

Electrochemistry↗

PubMed2006

Grafting of cellulose fibers with poly(epsilon-caprolactone) and poly(L-lactic acid) via ring-opening polymerization.

In this study, ring-opening polymerization (ROP) of epsilon-caprolactone (epsilon-CL) and L-lactide (L-LA) has been performed from cellulose fibers. The hydroxyl groups on cellulose act as initiators in the polymerization, and the polymers are covalently bonded to the cellulose fiber. As an attempt to introduce more available hydroxyl groups on the surface, and thereby obtain higher grafting efficiency in the ROP of epsilon-CL and L-LA, unmodified paper was modified with xyloglucan-bis(methylol)-2-methylpropanamide (XG-bis-MPA) and 2,2-bis(methylol)propionic acid (bis-MPA), respectively. The grafted substrates were characterized via Fourier transform infrared spectroscopy (FTIR), contact angle measurement, atomic force microscopy, and enzymatic degradation. The results showed a successful grafting of poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA) from the cellulose fiber surfaces. Furthermore, the results showed an improved grafting efficiency after activation of the cellulose surface with bis-MPA, and showed that the amount of grafted polymer could be controlled by the ratio of added free initiator to monomer.

Cellulose↗

PubMed1996

Effect of temperature on morphology of electrochemically-deposited calcium phosphates.

Calcium phosphates were electrochemically deposited on titanium plates at temperatures from 4 degrees C to 92 degrees C in a solution of NaCl, K2HPO4 and CaCl2 x 2H20. Scanning electron microscopic studies showed that granular deposits formed on the electrode at electrolyte temperatures of 4 degrees C, 22 degrees C, and 37 degrees C; needle-like deposits formed at 52 degrees C-92 degrees C. The width and length of the needles increased with the temperature of the electrolyte. Based on the results of characterization by electron diffractometry. Fourier transform infrared spectroscopy and X-ray diffractometry, the granular deposits were identified as carbonate-containing calcium phosphate with low crystallinity, and the needle-like deposits as carbonate-containing apatite crystals elongated along the c-axis. Crystallinity of the deposits increased with the temperature of the electrolyte, whereas the orientation indices of the apatite increased with temperature up to 82 degrees C and slightly decreased at 92 degrees C.

Apatites↗