PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Dentin”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources

In vitro cytotoxicity of one-step dentin bonding systems.

The cytotoxicity of resinous monomers may vary on mixing, calling into question the cytotoxicity of the new dentin bonding agents that are mixed in a single vial. The cytotoxicity of fourth and fifth generation dentin bonding agents was compared in vitro. All-Bond 2, One-Step, Scotchbond Multi-Purpose, Scotchbond One, Syntac, Syntac Single Component, Tenure, and Tenure Quick were tested uncured. The cytotoxicity of several dilutions of fourth generation dentin primer, dentin bonding agent, dentin primer + dentin bonding agent, and fifth generation single component products diluted at 10(-1) to 10(-8) in culture medium was recorded with a MTT assay on L929 fibroblasts. Only one synergistic (increased cytotoxicity after mixing primer and bonding agent) cytotoxic effect was observed with Tenure at 10(-5) dilution. An antagonistic effect (decreased cytotoxicity after mixing primer and bonding agent) was observed with All-Bond 2 between 10(-4) and 10(-8) dilutions. Scotchbond and Syntac fifth generation dentin bonding agents were less cytotoxic than their fourth generation counterparts. All-Bond and Tenure fifth generation dentin bonding agents were more cytotoxic than their fourth generation counterparts only in low dilutions. Clinical studies should confirm these good results, because no dramatic synergistic cytotoxic effect could be detected.

Analysis of Variance↗

Mineralization in bovine dentin adjacent to glass-ionomer restorations.

OBJECTIVES: To assess the uptake of fluoride as well as the increase in mineralization by bovine dentin after restoring an experimentally made cavity with conventional glass-ionomer cement or a polyacid resin composite. METHODS: Cylindrical cavities were prepared on the labial root surfaces in bovine dentin. The cavities were restored with the test material. The restored teeth were individually suspended in distilled water at 37 degrees C for 30 days. The teeth were sectioned and the superficial dentin cavity walls were analyzed for fluoride, calcium, and phosphorus by an EPMA device. The effects of the different fluoride-releasing materials on the hardness of the dentin were determined by indentation (20-microm intervals below the filled surface into the underlying sound dentin from the surface to a depth of 100microm). RESULTS: Conventional glass-ionomer cement had a significant effect on fluoride uptake. In addition, the calcium and phosphorus scan revealed the elevation of calcium and phosphorus levels in a deeper zone corresponding to the locations of the fluoride uptake at the surface of axial wall. However, the polyacid resin composite did not exhibit a zone of calcium and phosphorus elevation. The average dentin hardness under conventional glass-ionomer cement in the studied five distances ranged from 84.3 to 61.3KHN, however, that of the polyacid resin composite ranged from 62.5 to 64.9KHN. Analysis of variance for these data demonstrated a significant difference in hardness between the 20-microm depth and the other depths (P<0.01, ANOVA Fisher's PSLD). CONCLUSION: The present paper indicates that the fluoride penetrated deeper into the dentin with conventional glass-ionomer cement than the polyacid resin composite. Conventional glass-ionomer cement had a significant effect on fluoride uptake. In addition, hypermineralization occurred within the superficial dentin cavity wall region of conventional glass-ionomer cement.

Analysis of Variance↗

Mutans streptococci and lactobacilli in carious dentine before and after Atraumatic Restorative Treatment.

OBJECTIVES: This study was performed to examine the cultivable flora in dentine after manual excavation of caries lesions using the Atraumatic Restorative Treatment (ART) technique and to examine for associations between the microbiological results and cavity size, dentine colour and consistency. METHODS: Dentine samples from 40 caries lesions were collected before and after treatment and cultured for total viable counts (TVC), mutans streptococci (MS) and lactobacilli. RESULTS: The bacterial bioburden between the two samples showed a significant reduction in the frequency and proportions of TVC and MS but not lactobacilli. CONCLUSION: Cavity preparation produced a clinical change in dentine colour and consistency from dark shades and soft dentine at enamel dentine junction to light shades and hard dentine at the cavity floor. The results show that cavity size, dentine colour and consistency are not absolute indicators of the microbiological bioburden in an ART cavity.

Child↗

Osteogenic potential of autogenic demineralized dentin implanted in bony defects in dogs.

The bone morphogenetic properties of implants of autogenic demineralized dentin were evaluated. The dentin matrix was implanted as small pieces and as thin slices in experimental mandibular osseous defects in dogs. The dentin implants were obtained from mandibular incisor teeth from the same dogs used in the experiment. Experimental interradicular osseous defects were surgically created in the mandibular premolars areas. 2 of the 3 defects were filled with either pieces or slices of prepared dentin. The 3rd defect served as an unfilled control. The results indicate that all demineralized autogenic dentin implants induce bone formation. There was an increase in the osteogenic capacity of the implant when the samples were used as thin slices. The slices of dentin matrix give no evidence of resorption and were readily incorporated into the new bone deposited. The end product was represented by a trabecular bone joined to the dentin matrix slices. In the case of the small piece samples, the specimens were readily resorbed and replaced by new deposits of cancelous bone. The osteogenic capacity of the small piece samples of the dentin matrix is less efficient comparable to the thin slice samples of the same implant material.

Alveolar Process↗

Demonstration of type III collagen in the dentin of mice.

It has been reported that, although type III collagen is present in human dentin where there is dentinogenesis imperfecta and in reparative dentin, it is absent in normal dentin. In a preliminary study, however, we observed evidence showing that small amounts of fibers showing positive labeling for type III collagen are present in the molars of normal mice. In the present study, in order to localize type III in normal dentin, immunofluorescent and immunoelectron microscopic examinations of the molars of normal mice were carried out using affinity-purified antibodies to mouse type III and type I collagen. The fibers positive for type III collagen were much more frequently observed in the root than in the crown. These fibers ran in peritubular dentin or near that in parallel to them. The incidence of the existence of dentinal tubules associated with type III collagen-positive fibrils either in or near peritubular dentin was low. These fibrils positive for type III collagen showed a clear cross-banding. In dentinal tubules, unusual collagen aggregations, segment long-spacing-like and fibrous long-spacing-like structures which were intensively stained for type I collagen but weakly so for type III collagen were seldom observed. Type III collagen-positive fibers often extended towards the pulp beyond the odontoblast layer, suggesting that these fibers were produced, at least partly, by the pulp cells.

Animals↗

Differential involvement of matrix vesicles during the initial and appositional mineralization processes in bone, dentin, and cementum.

The distribution of matrix vesicles and its role in biological mineralization were examined in bone and dental hard tissues of the rat after daily administrations of 1-hydroxyethylidene-1, 1-bisphosphonate (HEBP), a potent inhibitor of mineralization, for 7 or 14 days. Newly formed, nonmineralized matrices of the HEBP-affected bone and mesodermal dental hard tissues other than circumpulpal dentin contained numerous mineral-filled matrix vesicles (MV), randomly distributed throughout the collagenous matrix. The distribution density of the mineral-filled MV in the HEBP-affected matrices of calvaria, metaphyseal trabecular bone, alveolar bone, and cellular cementum ranged from 60 to 70 per 100 microm(2), and no statistically significant differences were noted among the values. In the HEBP-affected dentin, however, MV were located only in the nonmineralized matrix of mantle dentin and totally absent in the circumpulpal dentin layers. Instead, the HEBP-affected circumpulpal dentin contained a dense meshwork of noncollagenous matrix enriched with calcium and phosphorus. Comparable meshwork structures were undetectable in nonmineralized matrices of the other hard tissues affected by HEBP. These observations suggest that a certain population of MV (60-70 per 100 microm(2)) is involved in the process of appositional mineralization in most of the mesodermal hard tissues, in addition to their well-known role in initial mineral induction in these tissues. Circumpulpal dentin appears to be an exception, where MV are not required for the appositional mineralization process. Exclusive localization of dentin phosphoproteins in circumpulpal dentin layers must take place to facilitate appositional mineralization at the calcification front, in the absence of MV.

Animals↗

Investigation of osteocalcin, osteonectin, and dentin sialophosphoprotein in developing human teeth.

Biochemical investigations in rodents have shown that numerous mineralized matrix proteins share expression in bone, dentin, and cementum. Little information is available regarding the expression pattern of these proteins in human tissues, particularly during tooth formation. The aim of this study was to identify the expression pattern of the two major noncollagenous proteins of bone and dentin, osteocalcin (OC) and osteonectin (ON), in comparison to the dentin-specific protein, dentin sialophosphoprotein (DSPP). Mandibles from fetuses (5-26 weeks), neonate autopsies, forming teeth from 10-12-year-old patients, third molars extracted for orthodontic reasons, and bone tumors were collected with approval from the National Ethics Committee. Human OC, ON, and DSPP mRNAs were detected by reverse transcription-polymerase chain reaction (RT-PCR) in fetal mandibles (5-11 weeks) and in primary cell cultures of dental pulp. In addition, OC, ON, and DSPP proteins were localized in forming human mineralized tissues using immunohistochemistry. In vivo, DSPP expression was associated with tooth terminal epithelial-mesenchymal interaction events, amelogenesis and dentinogenesis. Transient DSPP expression was seen in the presecretory ameloblasts with continuous expression in the odontoblasts. In contrast, both osteoblasts and odontoblasts showed a temporal gap between OC and ON expression in early development. ON was expressed in the initial stages of cytodifferentiation, whereas OC was expressed only during the later stages, especially in the teeth. At the maturation stage of enamel formation, both proteins were detected in odontoblasts and their processes within the extracellular matrix. In contrast to bone, OC was not localized extracellularly within the collagen-rich dentin matrix (predentin or intertubular dentin), but was found in the mature enamel. ON was present mostly in the nonmineralized predentin. These results demonstrate for the first time that both OC and ON are produced by human odontoblasts and determine the expression pattern of DSPP in human teeth, and suggest that OC and ON move inside the canalicule via odontoblast cell processes becoming localized to specific extracellular compartments during dentin and enamel formation. These distinct extracellular patterns may be related to the nature of DSPP, OC, and ON interactions with other matrix-specific macromolecules (i.e., amelogenin, dentin matrix protein-1) and/or to the polarized organization of odontoblast secretion as compared with osteoblasts.

Adult↗

A comparative study of sialic acid-rich proteins in rat bone and dentin.

Four sialic acid-rich (SA-rich) proteins found in bone and dentin, osteopontin (OPN), bone sialoprotein (BSP), bone acidic glycoprotein-75 (BAG-75), and dentin matrix protein 1 (DMP1), share some common features. We used SDS-PAGE and Western immunoblots to analyze and compare SA-rich proteins in bone and dentin extracts from rats with a single chromatographic procedure. OPN was detected in dentin extracts, with a relative level less than one-seventieth of that in bone. Both bone and dentin BSP demonstrated an extremely broad distribution pattern, probably due to a high degree of heterogeneity in post-translational modifications. BAG-75 in both bone and dentin was detected as an 83 kDa band, dramatically distinct from that of DMPI. Using a polyclonal antibody raised against a purified bone 57 kDa protein (a portion of DMPI), we detected 150 kDa protein bands in bone fraction; the same bands were recognized by antirecombinant rat DMPI antibody. Bands from dentin migrating at about 150 kDa in earlier fractions and progressing to 200 kDa in later fractions showed a clear immunoreactivity to the anti-57 kDa antibody. We conclude that the majority of DMPI in rat bone is processed into fragments, whereas that in dentin remains intact.

Animals↗

A confocal microscopic study relating the autofluorescence of carious dentine to its microhardness.

OBJECTIVE: An in-vitro study to examine the correlation between the distribution of the autofluorescent signal emitted from carious dentine (detected using confocal laser scanning microscopy) and its microhardness, within the depths of human dentine lesions. MATERIALS AND METHODS: Twelve carious teeth were sectioned longitudinally, the cut faces marked with a grid reference line system and colour photomicrographs taken. The same samples were imaged using confocal laser-scanning microscopy for autofluorescence and then subjected to microhardness testing using a Knoop microhardness indenter. Adjacent sound dentine was used as a control reference. Digital image superimposition allowed direct comparisons to be made between the colour, autofluorescence and microhardness of each lesion. RESULTS: Sound enamel and dentine did not autofluorescence. Autofluorescence distribution from carious dentine correlated with the highly softened tissue (detected using the Knoop indenter) and terminated at a level superficial to the translucent zone. This zone was still pigmented. Normal, sound dentine hardness levels were found deep to the translucent zone. CONCLUSIONS: A correlation existed between the zone of autofluorescence and carious dentine that was markedly softened by the carious process. These findings highlighted a possibility that the autofluorescence might be used as an in-vitro, objective histological marker for the softened, carious dentine requiring clinical excavation.

Color↗

Effect of exposing dentine to sodium hypochlorite and calcium hydroxide on its flexural strength and elastic modulus.

AIM: The aim of this study was to evaluate the effect of sodium hypochlorite (NaOCl) solutions (3%, 5%) and saturated calcium hydroxide (Ca(OH)2) solution, individually and consecutively, on the flexural strength and modulus of elasticity of standardized dentine bars. METHODOLOGY: Standardized plano-parallel dentine bars (n = 121) were divided into five test groups and one control group. The control group 1 consisted of dentine bars, stored in normal saline until testing. The dentine bars in the five test groups were treated by exposure to the following solutions; group 2--3% NaOCl, 2 h; group 3--5% NaOCl, 2 h; group 4--saturated Ca(OH)2 solution, 1 week; group 5--3% NaOCl, 2 h and then saturated Ca(OH)2 solution 1 week; group 6--5% NaOCl, 2 h and then saturated Ca(OH)2 solution 1 week. The dentine bars were then loaded to failure in a three-point bend test. RESULTS: The data revealed a significant (P < 0.001) decrease in the modulus of elasticity and flexural strength of the dentine bars treated with 3% and 5% NaOCl. There was no significant difference in the flexural strength and the modulus of elasticity between the 3% and 5% NaOCl groups. Exposure to Ca(OH)2 significantly (P < 0.001) reduced the flexural strength but had no significant effect on the modulus of elasticity. The groups treated with sodium hypochlorite followed by calcium hydroxide did not have moduli of elasticity and flexural strengths that were significantly different from those treated only with sodium hypochlorite. CONCLUSIONS: NaOCl (3 & 5%) reduced the modulus of elasticity and flexural strength of dentine. Saturated Ca(OH)2 reduced the flexural strength of dentine but not the modulus of elasticity. Sequential use of NaOCl and Ca(OH)2 has no additional weakening effect.

Calcium Hydroxide↗

Acidity of conventional luting cements and their diffusion through bovine dentine.

AIM: To examine the changes in pH of luting cements and acid diffusion of luting cements through bovine dentine using a pH-imaging microscope (SCHEM-100; Horiba Ltd, Kyoto, Japan). METHODOLOGY: The pH of the surface of three conventional luting cements, glass-ionomer, zinc phosphate and zinc polycarboxylate was measured with SCHEM-100 for 1 month. The acid diffusion from the three luting cements through bovine dentine was investigated by measuring pH changes during the application of each luting cement on the bovine dentine surface. Coronal bovine dentine disks were prepared to thicknesses of 0.50 and 0.25 mm. Each luting cement was placed on the labial dentine surface, and the pH change of the pulpal surface was observed every 3 min for 30 min with SCHEM-100. RESULTS: Glass-ionomer showed the lowest pH values for longer times. Neutralization proceeded furthest in zinc polycarboxylate. The 0.5-mm-thick dentine disks showed no pH change on the pulpal side with all the three cements. The 0.25-mm-thick disks revealed evidence of acid diffusion on the pulpal side of the cemented dentine and significantly lower pH when cemented with glass-ionomer and zinc phosphate than with zinc polycarboxylates. CONCLUSIONS: This study demonstrated that glass-ionomer exhibited a lower setting pH than zinc phosphate and zinc polycarboxylate, and acid diffusions from glass-ionomer and zinc phosphate cements were observed when placed on 0.25-mm-thick dentine disks.

Acids↗

Odontoblast cells immortalized by telomerase produce mineralized dentin-like tissue both in vitro and in vivo.

The formation of dentin provides one well accepted paradigm for studying mineralized tissue formation. For the assembly of dentin, several cellular signaling pathways cooperate to provide neural crest-derived mesenchymal cells with positional information. Further, "cross-talk" between signaling pathways from the mesenchymal derived odontoblast cells and the epithelially derived ameloblasts during development is responsible for the formation of functional odontoblasts. These intercellular signals are tightly regulated, both temporally and spatially. When isolated from the developing tooth germ, odontoblasts quickly lose their potential to maintain the odontoblast-specific phenotype. Therefore, generation of an odontoblast cell line would be a valuable reproducible tool for studying the modulatory effects involved in odontoblast differentiation as well as the molecular events involved in mineralized dentin formation. In this study an immortalized odontoblast cell line, which has the required biochemical machinery to produce mineralized tissue in vitro, has been generated. These cells were implanted into animal models to determine their in vivo effects on dentin formation. After implantation, we observed a multistep, programmed cascade of gene expression in the exogenous odontoblasts as the dentin formed de novo. Some of the genes expressed include the dentin matrix proteins 1, 2, and 3, which are extracellular matrix molecules responsible for the ultimate formation of mineralized dentin. The biological response was also examined by histology and radiography and confirmed for mineral deposition by von Kossa staining. Thus, a transformed odontoblast cell line was created with high proliferative capacity that might ultimately be used for the regeneration and repair of dentin in vivo.

Animals↗

Comparative study of influence on tensile bond strength of a composite to dentin using Er:YAG laser, air abrasion, or air turbine for preparation of cavities.

OBJECTIVES: The purpose of this study was to evaluate, in vitro, the tensile bond strength of the Single Bond (3M) adhesive system placed over dentin surfaces treated with air turbine, Er:YAG laser without contact and in focused or air abrasion. SUMMARY BACKGROUND DATA: The use of dentin adhesives is a well-established clinical routine among the dentists. However, there have been few reports comparing the influence of the Er:YAG laser, air abrasion, and air turbine on the Single Bond tensile bond strength of adhesives systems to dentin fact that could influence which tools dentists select for use in cavity preparations. METHODS: Twenty-three extracted retained human molars were used in this study. The coronal portion was divided in two parts and fixed in acrylic resin; the occlusal surface was abraded to a 2-mm width with a mechanic lathe until the dentin surface was completely exposed. The dental portions were divided into three groups of 15 each and treated with Er:YAG laser, air abrasion, or air turbine. A 3 mm hole in the center of each tooth was marked off using contact paper. Single Bond (3M) adhesive system was applied after acid phosphoric at 35% application for 15 sec over dentin surfaces. A resin composite cone was built into the delimited area to accomplish the tensile bond strength test on the EMIC universal test machine. The specimens were then evaluated by stereoscopy to determine the type of failures into the dentin-adhesive-resin composite surface. RESULTS: The tensile test was performed using the universal testing machine EMIC DL-2000 at a cross-head speed of 0.5 mm/min. The average results were: air turbine (17.52 MPa), Er:YAG laser (16.65 MPa) and air abrasion (15.83 MPa). Statistical treatment by ANOVA and Tukey's test (p < 0.01) showed no significant differences between the groups tested. The tensile bond strength test to the dentin showed no significant difference among the three groups when the Single Bond was used after the 35% phosphoric-acid conditioning. The stereoscopy showed a predominant adhesive failure in all groups. CONCLUSION: These results suggest that Single Bond tensile bond strength is the same as dentin prepared by Er:YAG laser, air abrasion, or air turbine.

Air Abrasion, Dental↗

Morphological study of dentin irradiated by solid-state ultraviolet lasers: a comparison of wavelength and repetition rate.

OBJECTIVE: In this study, we examined the surface morphology of dentin after being ablated by the third, fourth, and fifth harmonics of the Nd:YAG laser. The influences of the repetition rate with respect to the wavelength were also investigated. BACKGROUND DATA: Typically, excimer lasers have been used as the primary sources of ultraviolet (UV) laser wavelengths to investigate laser ablation of dentin. In the past decade, developments in nonlinear optical technology have given rise to higher conversion efficiencies of the fourth and fifth harmonics of the Nd:YAG laser. To this end, sufficient energy densities of the fourth and fifth harmonics of the Nd:YAG laser have been generated to ablate dentin. MATERIALS AND METHODS: Thin dentin samples (typically 1 mm) were irradiated by the third, fourth, and fifth harmonics of the Nd:YAG laser. Ablation occurred at repetition rates of 1, 5, 10, and 20 Hz, using similar energy densities for each laser wavelength. An environmental scanning electron microscope was used to assess the resultant surface morphology. RESULTS: Dentine surfaces after 355-nm ablation exhibited plugging at each repetition rate. Similar surfaces were exhibited after 266-nm ablation. "Plugging" over dentine tubules was less obvious after 213-nm laser ablation. The results may highlight the impact of different absorption characteristics of each wavelength. CONCLUSION: Solid-state UV laser ablation of dentin exhibits similar properties to excimer laser ablation. At similar energy densities, the deeper UV laser wavelengths exhibit less "plugging" of dentin tubules, suggesting a lower thermal impact.

Dentin↗

Treatment of dentin hypersensitivity by Nd:YAG laser.

Our previous study indicated that dentin surface irradiated with an Nd:YAG laser at an energy output of 30 mJ, 10 pulses/sec (pps), for 2 min resulted in a melted surface and a closure of exposed dentinal tubules orifices, but without dentin surface cracking. The purpose of this study is to evaluate the effectiveness of the Nd:YAG laser in the treatment of dentin hypersensitivity. Thirty subjects participated in this study and were followed for 3 months. Two sites of dentin hypersensitivity in a patient were treated; one received Nd:YAG laser treatment and the other served as control. Dentin hypersensitivity was assessed by mechanical and thermal stimulus. Pulpal vitality was measured using an electrical stimulus. The Nd:YAG laser treatment reduced dentin hypersensitivity to air by 65% and to mechanical stimulus by 72% over 3 months. All teeth remained vital after laser treatment, without adverse reactions or complications. In conclusion, the Nd:YAG laser can be used to reduce dentin hypersensitivity without detrimental pulpal effects.

Adult↗

A comparison of the morphological changes after Nd-YAG and CO2 laser irradiation of dentin surfaces.

The purpose of this study was to compare the morphological changes after Nd-YAG and CO2 laser irradiation on dentin surfaces with or without the smear layer. Eighty-one 3-mm-thick dentin specimens collected from the middle third of molar crowns were used. The dentin surfaces were ground to #320, #400, and #600 grit in series to create a smear layer. Half of the specimens were treated with 14% EDTA for 2 min to remove the smear layers. The lasers were applied on each specimen perpendicularly with 1-mm focus distance to the dentin surface for 4 s. The parameters for the Nd-YAG laser were 50 mJ, 100 mJ, and 150 mJ at 10 pps, 20 pps, and 30 pps, and for the CO2 laser were 2 W, 3 W, and 4 W at 5 ms x 20 pps, 10 ms x 10 pps, 20 ms x 20 pps, 50 ms x 2 pps, 100 ms x 2 pps, and 200 ms x 2 pps. The results showed that the Nd-YAG laser caused crater and melting of the dentin surface, especially in dentin specimens with smear layers. The CO2 laser produced extensive cracking lines on dentin surfaces with a smear layer, whereas surface erosion and crater formation were found on specimens without a smear layer. In conclusion, both the laser types and smear layer have a significant influence on the morphological changes of dentin surfaces irradiated by lasers.

Carbon Dioxide↗

Quantitative analysis of the solubilizing action of MTAD, sodium hypochlorite, and EDTA on bovine pulp and dentin.

Necrotic bovine pulp and dentin were used in this study as model tissues to represent the organic and inorganic components of the smear layer present in instrumented root canals. The capabilities of endodontic irrigants to dissolve pulverized forms of these tissues were compared. Lyophilized tissue samples were mixed for 2 h at 37 degrees C with MTAD, three concentrations of sodium hypochlorite (NaOCl), 17% EDTA, or isotonic saline. Undissolved tissues were rinsed with water and lyophilized. The change in tissue weight after exposure to an irrigant was measured to quantify solubilization. The results showed that various concentrations of NaOCl removed organic components of pulp and dentin effectively. As pulp solubilizers 5.25% and 2.60% NaOCl were equal (>90%), and 5.25% NaOCl was capable of dissolving virtually the entire organic component of dentin. EDTA was capable of solubilizing inorganic material in dentin and organic material in pulp and likely also in dentin. It dissolved >70% of the dentin and >51% of the pulp. The solubilizing effects of MTAD on pulp and dentin were somewhat similar to those of EDTA. The major difference between the actions of these solutions was a high binding affinity of doxycycline present in MTAD for the dentin.

Animals↗

Dentine-removing characteristics of K-files energized by the Piezon-Endo.

This in-vitro study evaluated the pattern of dentine removal when a size 25 K-file energized by the Piezon-Endo was applied to flat surfaces of dentine under standardized conditions. The effects of power setting, interfacial force between file and dentine, direction of file oscillation and operator-assisted movement were examined. Vinyl polysiloxane impressions of the instrumented surfaces revealed characteristic patterns consisting of a series of oblique crests, similar to those observed in a previous study using the Cavi-Endo. Each crest was parallel to the next and separated by a relatively constant distance. These crests were disposed along the line of contact with the file. The Reflex microscope was used to determine the height, width and separation of these crests. There were differences in the amount and pattern of dentine removal compared with the study on the Cavi-Endo. When the file was held against the dentine surface using the minimum power setting and an interfacial force of 30 g, the pattern of dentine removal was very similar to that produced by the Cavi-Endo. Increasing the power setting to the maximum recommended for endodontics produced a slight but statistically non-significant increase in dentine removal. Further increase of the power setting to the absolute maximum produced significantly deeper and wider areas of dentine removal by the apical part of the file.(ABSTRACT TRUNCATED AT 250 WORDS)

Dental Cavity Preparation↗