SEARCH · PubMed Health

Results for “Polystyrenes”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources

PubMed2005

AFM study of micelle chaining in surface films of polystyrene-block-poly(ethylene oxide) stars at the air/water interface.

A series of three-arm star block copolymers were examined using atomic force microscopy (AFM). These stars consisted of a polystyrene core composed of ca. 111 styrene units/branch with poly(ethylene oxide) (PEO) chains at the star periphery. Each star contained different amounts of PEO, varying from 107 to 415 ethylene oxide units/branch. The stars were spread as thin films at the air/water interface on a Langmuir trough and transferred onto mica at various surface pressures. Circular domains representing 2D micelle-like aggregated molecules were observed at low pressures. Upon further compression, these domains underwent additional aggregation in a systematic manner, including micellar chaining. At this point, domain area and the number of molecules/domain increased with increasing pressure. In addition, it was found that longer PEO chains led to greater intermolecular separation and less aggregation. These AFM results correspond to attributes seen in the surface pressure-area isotherms of the stars. In addition, they demonstrate the viability of AFM as a quantitative characterization technique.

Journal Article↗

PubMed2005

Distribution of CdSe quantum dots within swollen polystyrene microgel particles using confocal microscopy.

CdSe quantum dots (QDs) are semiconducting nanoparticles that fluoresce when stimulated by visible light. This property has been exploited in their use as tracer particles in biomedical applications. In this study, confocal microscopy has been used to determine the distribution of QDs within polystyrene microgel particles, dispersed in an organic solvent. It was found that the extent of microgel swelling affected the penetration of the QDs into the particles. Only when the microgel particles were swollen to their maximum extent were the QDs able to penetrate into the central core region of the particles.

Journal Article↗

PubMed2005

Self-organization of polystyrenes into ordered microstructured films and their replication by soft lithography.

We report on the formation of ordered arrays of micrometric holes on the surface of polystyrene (PS) films cast from volatile solvents in the presence of humidity at different temperatures. The formation mechanism is investigated for PS having different molecular weights, polydispersities, and carboxylic terminations. Among the chosen materials, a highly regular honeycomb microstructured morphology is obtained on the surface of films prepared with dicarboxy-terminated PS with = 100,000. Experiments and observations on film formation indicate that polar groups are playing a fundamental role in this process. Tuning the surface tension by means of polar terminations allows the film morphology to be modified and in particular the preparation of two- or three-dimensional microstructured films. Finally, we show how these structures can be replicated by soft lithography and then used in the fields of photonic crystals and organic electronics.

Journal Article↗

PubMed2005

Interfacial reactions in confinement: kinetics and temperature dependence of the surface hydrolysis of polystyrene-block-poly(tert-butyl acrylate) thin films.

The effect of confinement on the kinetics of the surface hydrolysis of polystyrene-block-poly(tert-butyl acrylate) (PS(n)-b-PtBA(m)) thin films on oxidized silicon substrates in 3 M aqueous hydrochloric acid was systematically investigated. As shown by X-ray photoelectron spectroscopy (XPS) and contact angle measurements, a skin layer of acid-sensitive PtBA is present on the surface of PS(n)-b-PtBA(m) films, consistent with the lower surface tension of PtBA compared to that of PS. The thickness of the skin layer was determined by angle-dependent XPS as approximately 8 nm for PS(690)-b-PtBA(1210). Tapping mode atomic force microscopy showed an increasing surface coverage of swollen poly(acrylic acid)-rich globules with increasing hydrolysis time. Using ex situ Fourier transform infrared spectroscopy, the reaction kinetics was determined quantitatively as a function of temperature, polymer film thickness, thermal pretreatment of the films, and block copolymer composition. The initial stages of the hydrolysis can be described as a pseudo-first-order reaction under all conditions investigated. The corresponding rate constants were found to be 2 orders of magnitude lower than those reported for the hydrolysis of tert-butyl acetate in solution and depended linearly on the fraction of PtBA exposed at the surface. However, the polymer film thickness, thermal pretreatment of the films, block copolymer composition, and local composition did not affect the rate constants. The negative value of the activation entropy (DeltaS(298)++ = -103 J/mol K), determined according to the Arrhenius equation and transition state theory, indicates that the tightness of the transition state is more pronounced in the PS(n)-b-PtBA(m) film compared to reactions in solution. Thus, the spatial constraints due to the incorporation of the reactive ester groups in thin polymer films are responsible for the observed reduced reactivity.

Journal Article↗

PubMed2005

Fabrication gradient surfaces by changing polystyrene microsphere topography.

A rather simple yet effective way to fabricate gradient surfaces by changing polystyrene (PS) microsphere topography in a temperature gradient field is proposed. The wettability of the film has an obvious gradient change from 88.7 to 148.1 degrees . The changes of the PS microsphere topography are believed to be responsible for the changing of the wettability.

Journal Article↗

PubMed2005

Surface heterogeneity of polystyrene latex particles determined by dynamic force microscopy.

Atomic force microscopy (AFM) was employed to characterize the surface chemistry distribution on individual polystyrene latex particles. The particles were obtained by surfactant-free emulsion polymerization and contained hydrophilic quaternary ammonium chloride, sodium sulfonate, or hydroxyethyl groups. The phase shift in dynamic force mode AFM is sensitive to charge/chemical interactions between an oscillating atomic force microscope tip and a sample surface. In this work, the phase imaging technique distinguished phase domains of 50-100 nm on the surfaces of dried latex particles in ambient air. The domains are attributed to the separation of ion-rich and ion-poor components of the polymer on the particle surface.

Journal Article↗

PubMed2004

Oil core-polymer shell microcapsules prepared by internal phase separation from emulsion droplets. I. Characterization and release rates for microcapsules with polystyrene shells.

Microcapsules with an oil core surrounded by a polymeric shell have been prepared by the controlled phase separation of polymer dissolved within the oil droplets of an oil-in-water emulsion. The dispersed oil phase consists of the shell polymer (polystyrene), a good solvent for the polymer (dichloromethane), and a poor solvent for the polymer (typically hexadecane). Removal of the good solvent results in phase separation of the polymer within the oil droplets. If the three interfacial tensions between the core oil, the shell-forming polymer, and the continuous phase are of the required relative magnitudes, a polymer shell forms surrounding the poor solvent. A UV-responsive organic molecule was added to the oil phase, prior to emulsification, to investigate the release of a model active ingredient from the microcapsules. This molecule should be soluble in the organic core but also have some water solubility to provide a driving force for release into the continuous aqueous phase. As the release rate of the active ingredient is a function of the thickness of the polymeric shell, for controlled release applications, it is necessary to control this parameter. For the preparative method described here, the thickness of the shell formed is directly related to the mass of polymer dissolved in the oil phase. The rate of volatile solvent removal influences the porosity of the polymer shell. Rapid evaporation leads to cracks in the shell and a relatively fast release rate of the active ingredient. If a more gentle evaporation method is employed, the porosity of the polymer shell is decreased, resulting in a reduction in release rate. Cross-linking the polymer shell after capsule formation was also found to decrease both the release rate and the yield of the active ingredient. The nature of the oil core also affected the release yield.

Journal Article↗

PubMed2004

Enhancement of electrochemical activity by small-sizing the vinylferrocene-immobilized polystyrene latex particles.

Voltammetry of vinylferrocene (VFc)-immobilized polystyrene(PS)-based latex particles was carried out in aqueous suspensions by changing the size of latex particles in order to investigate the dependence of the electroactivity of the particles on their size. The anodic peak current was controlled by diffusion of the latex. The voltammetric peak currents increased with an increase in the diameter of PS latex particles for a given analytical concentration of the particles, exhibiting the dependence on 1.5 powers of the diameter of the particles. The increase can be explained in terms of combination of the uniform distribution of VFc in the particle, the partial charge transfer, and the Stokes-Einstein equation for diffusion coefficients. The oxidation of VFc occurs in the restricted domain (0.07 microm) from a contact point of the particle with the electrode. The overall reaction mechanism is diffusion of the particle to the electrode, partial oxidation to VFc+, release of VFc+ from the particle to the solution, and reduction of the released VFc+.

Journal Article↗

PubMed2004

Preparation, characterization, and solution viscosity of polystyrene-block-polyisoprene nanofiber fractions.

A polystyrene-block-polyisoprene (PS-b-PI) sample with 130 styrene and 370 isoprene units was synthesized and characterized. The diblock formed mostly cylindrical micelles in N,N-dimethylacetamide with a PI core and a PS corona. The PI core of the micelles was cross-linked by S2Cl2 to yield nanofibers. The nanofibers were shortened by ultrasonication to yield fractions withweight-average length (Lw) between approximately 900 and approximately3400 nm. Transmission electron microscopy and light scattering were used to characterize the fractions. The zero-shear intrinsic viscosity data [eta] of the fractions were obtained in tetrahydrofuran (THF), THF/N,N-dimethylformamide (DMF), and THF/cyclohexane (CHX), where THF is a good solvent for both the corona and the core, DMF solubilizes only the corona, and CHX is a theta solvent for the corona chains at 34.5 degrees C. The [eta] data of the fractions were treated by the Bohdanecky method derived from the Yamakawa-Fujii-Yoshizaki (YFY) theory for wormlike polymer chains and yielded the persistence length lP and the hydrodynamic diameters dh for the nanofibers. The reasonable dh values and the reasonable trend of dh variation with solvent quality change establish unambiguously the validity of YFY theory.

Journal Article↗

PubMed2005

Polystyrene-block-poly(ethylene oxide) stars as surface films at the air/water interface.

Star diblock copolymers containing polystyrene (PS) and poly(ethylene oxide) (PEO) were investigated as surface films at the air/water interface. Both classic and dendritic-like stars were prepared containing either a PS core and PEO corona or the reverse. The investigated polymers, consisting of systematic variations in architectures and compositions, were spread at the air/water interface, generating reproducible surface pressure-area isotherms. All of the films could be compressed to higher pressures than would be possible for pure PEO. For stars containing 20% or more PEO, three distinct regions appeared. At higher areas, the PEO absorbs in pancakelike structures at the interface with PS globules sitting atop. Upon compression, a pseudoplateau transition region appeared. Both regions strongly depended on PEO composition. The pancake area and the pseudoplateau width and pressure increased in a linear fashion with an increasing amount of PEO. In addition, minimum limits of PEO chain length and mass percentage were determined for observing a pseudoplateau. At small areas, the film proved less compressible, producing a rigid film in which PS dominated. Here, the film area increased with both molecular weight and the amount of PS. Comparison with pure linear PS showed the stars spread more, occupying greater areas. Among the stars, the PEO-core stars were more compact while the PS-core stars spread more. The influence of architecture in terms of the core/corona polymers and branching were also examined. The effects of architecture were subtle, proving less important than PEO chain length or mass percentage.

Journal Article↗

PubMed2005

Disk morphology and disk-to-cylinder tunability of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene triblock copolymer solution-state assemblies.

Disk and cylindrical micellar assemblies were formed through self-organization of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene (PAA-b-PMA-b-PS) amphiphilic triblock copolymers with organic diamines as counterions in water/ tetrahydrofuran (THF) solvent mixtures. The system was investigated by means of transmission electron microscopy and cryogenic transmission electron microscopy. It was found that the assembled-state morphologies could be modified by alteration of the type and concentration of cationic diamine counterion undergoing interaction with the negatively charged, polyelectrolyte PAA corona block, the relative amount of water in the water/THF mixture, and the hydrophobic block chain length. Multivalency of the organic amine counterion was critical for disk formation. It was further demonstrated that a single block copolymer underwent disc-to-cylindrical micellar transitions reversibly with variation in the relative water/THF ratio. The ability to form disks beginning from either THF-rich or water-rich solutions indicated that the disk morphology was thermodynamically stable and that THF was important in keeping the micellar structure from becoming kinetically frozen. The nanoassemblies were produced having low size dispersities and were stable for at least one month. Intermediate structures between disks and cylinders were also observed, indicating two distinct kinetic pathways between the two micelle structures.

Journal Article↗

PubMed2005

Reversible aggregation of polystyrene-block-poly(2-vinylpyridine)-block-poly(ethylene oxide) block copolymer micelles in acidic aqueous Solutions.

Micelles of polystyrene-block-poly(2-vinylpyridine)-block-poly(ethylene oxide) (PS-PVP-PEO) were studied in acidic aqueous solutions by static and dynamic light scattering, alkalimetric titration, fluorescence correlation spectroscopy, and after deposition on a mica surface by atomic force microscopy. The PS-PVP-PEO micelles prepared by dialysis in ternary 1,4-dioxane-methanol-acidic water mixtures have a very low association number and show a strong tendency to form aggregates. The aggregation, which is promoted at low pH, seems to be fully reversible. Possible mechanisms of the aggregation are discussed. Atomic force microscopy scans of PS-PVP-PEO micelles deposited on a mica surface reveal the formation of micellar aggregates and support the general concept of aggregation upon changes in conditions and deterioration of the stability of small micelles.

Journal Article↗

PubMed2006

Synthesis and characterization of charged polystyrene-acrylic acid latex particles.

Novel, monodisperse charged colloidal particles of polystyrene cross linked with divinylbenzene and surface-grafted with acrylic acid were synthesized by emulsion polymerization and were characterized by estimating the dissociable surface charge by conductivity titration, the particle effective charge by conductivity verses particle concentration, and the particle size by dynamic light scattering and atomic force microscopy. The structural ordering and dynamics were investigated as a function of the volume fraction of the particles using static and dynamic light scattering, respectively. Furthermore, from the electrophoresis measurements, these particles are found to have a high salt tolerance due to increases in charge as a function of salt concentration.

Journal Article↗

PubMed2005

Studies on the preparation and characterization of monodisperse polystyrene latices. VI. Preparation of zwitterionic latices.

The preparation of zwitterionic latex particles is reported by using a mixed anionic and cationic initiator system without requiring surface-active agents. Isoelectric points were found from microelectrophoresis experiments and were in the pH range of 3.5-5. Close to the isoelectric point, the latices coagulated as expected, and good stability was achieved outside this narrow range. This range of stability was in good agreement with predictions from current theory. Redispersion after coagulation was found to be difficult as was expected for a hydrophobic colloid. The electrokinetic behavior did not result in the maximum in zeta potential at an electrolyte concentration of 1 mM unlike the situation for other hydrophobic polystyrene latex particles, and hence these systems may be even better models for other colloidal studies.

Journal Article↗

PubMed2006

Preparation of titania-coated polystyrene particles in mixed solvents by ammonia catalysis.

A mixed-solvent method was developed to coat polystyrene (PS) spheres with smooth, homogeneous shells of amorphous titania by ammonia catalysis. The TEM images showed that, in the presence of ammonia, the thickness of titania shells could be controlled in the range of 8-65 nm by varying the concentration of titanium tetrabutoxide (TBOT) in the ethanol/acetonitrile mixed solvents with an appropriate volume ratio. The diffusion-controlled mechanism of the mixed solvents and the catalysis mechanism of ammonia were investigated. After the calcination of core-shell particles for 2 h at 500 degrees C, spherical hollow titania shells could be obtained, and the surfaces of the particles remained quite smooth and homogeneous. The XRD analysis indicated that calcination promoted the transformation of amorphous titania into an anatase phase.

Journal Article↗

PubMed2006

No intrinsic depletion layer on a polystyrene thin film at a water interface.

Using neutron reflectivity, we found that there is no intrinsic depletion layer at a deuterated polystyrene (dPS) film and deuterium oxide (D(2)O) interface. A spun-cast film is susceptible to contamination on its surface from its surroundings during sample preparation. A contamination layer of hydrogenated organic material will be detected as a reduced scattering length density layer at the interface. We demonstrate that, by careful treatment of the film, contamination would be the primary cause of the reduced scattering length density layer at the interface.

Journal Article↗

PubMed2006

Effective interactions in mixtures of silica microspheres and polystyrene nanoparticles.

We investigate the effect of small concentrations of highly charged nanoparticles on the stability of uncharged colloidal microspheres using large-scale simulations. Employing pair potentials that accurately represent mixtures of silica microspheres and polystyrene nanoparticles as studied experimentally, we are able to demonstrate that nanoparticle-induced stabilization can arise from a relatively weak van der Waals attraction between the colloids and nanoparticles. This demonstrates that the nanoparticle haloing mechanism for colloidal stabilization is of considerable generality and potentially can be applied to large classes of systems. The range of optimal nanoparticle concentrations can be tuned by controlling the attraction between colloids and nanoparticles.

Journal Article↗

PubMed2006

Effect of supercritical CO2 in modified polystyrene 3D latex arrays.

The effect of supercritical CO(2) (scCO(2)) in 3D latex arrays formed by monodispersed particles of polystyrene (PS), PS cross-linked with divinylbenzene (PS-DVB), and PS block copolymers with 2-hydroxyethyl methacrylate (PS-HEMA), methacrylic acid (PS-MA), acrylic acid (PS-AA), itaconic acid (PS-IA), and a mixture of methacrylic and itaconic acid (PS-IA-MA) has been studied. Sorption of CO(2) into the polymer particles leads to a decrease in the glass transition temperature of the polymer and the swelling of the particles and induces their coalescence. 3D-latex arrays of the former compositions were treated in scCO(2) at temperatures and pressures ranging from 40 to 80 degrees C and from 85 to 197 bar, respectively. The effect of CO(2) on the polymeric template was assessed by scanning electron microscopy and N(2) adsorption analysis. Bare PS and PS-HEMA particles sintered readily in scCO(2) at 40 degrees C and 85 bar. On the other hand, particles containing carboxylic acid groups on their surface (PS-MA, PS-AA, PS-IA, and PS-IA-MA) were, at the same temperature and pressure, more resistant to the CO(2) treatment. For a given polymer composition, the sorption of CO(2) inside the polymer particles, the swelling, and the degree of coalescence depend on the pressure, temperature, and time of the CO(2) treatment. Analysis of the pore size distributions from the N(2) adsorption data has allowed us to quantify the degree of coalescence of the particles in the matrix. By careful control of the experimental variables, the coalescence of the 3D latex array could be finely tuned using CO(2).

Journal Article↗