PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Particle Size”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources

Particle-size distribution of polycyclic aromatic hydrocarbons in urban air in southern Spain.

The size distribution of polycyclic aromatic hydrocarbons (PAH) was determined for airborne particles from a large city with high vehicular traffic. The analytical method was optimised and validated using NIST standard reference material (SRM 1649a Urban Dust). The 16 priority PAH listed in the US-EPA were Soxhlet-extracted from filtered particulate matter and then fractionated using on-column chromatography. The aromatic fraction was quantified by gas chromatography-mass spectrometry. Real samples of particles collected in Seville (Spain) were analysed using the validated method. Values for the total concentration of PAH in the air, as well as the concentrations of each PAH in six particle-size ranges were obtained. Values of the PAH in TSP, PM10, PM2.5 and PM1 were assessed.

Air Pollutants↗

Human lymphedema fluid lipoproteins: particle size, cholesterol and apolipoprotein distributions, and electron microscopic structure.

The concentration of cholesterol, apolipoproteins A-I, B, and E has been determined in lymphedema fluid from nine patients with chronic primary lymphedema. The concentrations were: 38.14 +/- 21.06 mg/dl for cholesterol, 15.6 +/- 6.17 mg/dl for apolipoprotein A-I, 7.5 +/- 2.8 mg/dl for apolipoprotein B, and 1.87 +/- 0.50 mg/dl for apolipoprotein E. These values represent 23%, 12%, 6%, and 38% of plasma concentrations, respectively. The ratio of esterified to unesterified cholesterol in lymphedema fluid was 1.46 +/- 0.45. Lipoproteins of lymphedema fluid were fractionated according to particle size by gradient gel electrophoresis and by exclusion chromatography. Gradient gel electrophoresis showed that a majority of high density lipoproteins (HDL) of lymphedema fluid were larger than ferritin (mol wt 440,000) and smaller than low density lipoproteins (LDL); several discrete subpopulations could be seen with the large HDL region. Fractionation by exclusion chromatography showed that more than 25% of apolipoprotein A-I and all of apolipoprotein E in lymphedema fluid was associated with particles larger than plasma HDL2. Apolipoprotein A-I also eluted in fractions that contained particles the size of or smaller than albumin. Isolation of lipoproteins by sequential ultracentrifugation showed that less than 25% of lymphedema fluid cholesterol was associated with apolipoprotein B. The majority of apolipoprotein A-containing lipoproteins of lymphedema fluid were less dense than those in plasma. Ultracentrifugally separated fractions of lipoproteins were examined by electron microscopy. The fraction d less than 1.019 g/ml contained little material, while fraction d 1.019-1.063 g/ml contained two types of particles: round particles 17-26 nm in diameter and square-packing particles 13-17 nm on a side. Fractions d 1.063-1.085 g/ml had extensive arrays of square-packing particles 13-14 nm in size. Fractions d 1.085-1.11 g/ml and fractions d 1.11-1.21 g/ml contained round HDL, 12-13 nm diameter and 10 nm diameter, respectively. Discoidal particles were observed infrequently.

Apolipoproteins↗

Variation of composition with particle size in coal liquid aerosols generated for inhalation toxicology studies.

The chemical composition and microbial mutagenicity of aerosols generated by nebulizing two coal oils (solvent refined coal [SRC]-I process solvent [PS] and SRC-II heavy distillate) were found to vary with particle size. Significant quantities of the most volatile components of PS were also present as vapors. Evaporation and condensation processes in oil deposited on surfaces as well as in the aerosol are believed to be important in determining the observed composition changes. Complete physical and chemical characterization of the aerosol should be included in inhalation studies of complex materials since the animals may be exposed to material of quite different composition than that placed in the generator initially.

Aerosols↗

Particle size analysis of concentrated phospholipid microemulsions II. Photon correlation spectroscopy.

The solvated droplet size of concentrated water-in-oil (w/o) microemulsions prepared from egg and soy lecithin/water/isopropyl myristate and containing short-chain alcohol cosurfactants has been determined using photon correlation spectroscopy (PCS). The effect of increasing the water volume fraction (from 0.04 to 0.26) on the solvated size of the w/o droplets at 298 K has been investigated at 4 different surfactant/cosurfactant weight ratios (Km of 1:1, 1.5:1, 1.77:1, and 1.94:1); in all cases the total surfactant/cosurfactant concentration was kept constant at 25% w/w. In the case of the microemulsions prepared from egg lecthin, the diffusion coefficients obtained from PCS measurements were corrected for interparticulate interactions using a hard-sphere model that necessitated estimation of the droplet volume fractions, which in the present study were obtained from earlier total intensity light-scattering (TILS) studies performed on the same systems. Once corrected for hard-sphere interactions, the diffusion coefficients were converted to solvated radii using the Stokes-Einstein equation assuming spherical microemulsion droplets. For both egg and soy lecithin systems, no microemulsion droplets were detected at water concentrations less than 9 wt% regardless of the alcohol and Km used, suggesting that at low concentrations of added water, cosolvent systems were formed. At higher water concentrations, however, microemulsion droplets were observed. The changes in droplet size followed the expected trend in that for a fixed Km the size of the microemulsion droplets increased with increasing volume fraction of water. At constant water concentration, droplet size decreased slightly upon increasing Km. Interestingly, only small differences in size were seen upon changing the type of alcohol used. The application of the hard-sphere model to account for interparticulate interactions for the egg lecithin systems indicated that the uncorrected diffusion coefficients underestimated particle size by a factor of slightly less than 2. Reassuringly, the corrected droplet sizes agreed very well with those obtained from our earlier TILS study.

Alcohols↗

Quantification of particle sizes with metal replication under standard freeze-etching conditions: a gold ball standard for calibrating shadow widths was used to measure freeze-etched globular proteins.

The real size of platinum-carbon (Pt-C) replicated particles is not directly equivalent to either its metal-coated diameter or its shadow width. This paper describes two indirect methods, shadow widths and coated particle diameters, for determining a particle's actual size beneath a Pt-C replication film. Both produce equivalent measurements using the same standardized conditions: 2.3 nm Pt-C films deposited at a 45 degree angle on an approximately -100 degrees C surface in a 10(-6) torr vacuum. For the first method, gold balls nucleated in a partial pressure of helium and deposited on flat indirect carbon films (root mean square roughness of 0.8 nm) on 400 mesh grids were used as test particles for calibrating shadow widths as a function of particle size. The gold ball test specimens were replicated, and a distribution of Pt-C shadow widths orthogonal to the Pt-C deposition direction was measured and averaged for gold balls 1.5 +/- 0.25 nm, 2.0 +/- 0.25 nm, etc. The diameter of each gold ball was measured within the Pt-C film along with its shadow width because the Pt-C did not obscure or adhere well to the gold. The shadow width distributions for each gold size do not differ significantly from log normal. Two proteins, the lactose repressor and the mitochondrial ATPase, F1, were also used as replication test objects. Negative staining of both proteins was conducted to measure their average diameters. In the second method, a distribution of Pt-C-coated lac repressor diameters perpendicular to the shadow direction was measured. The Pt-C film thickness measured on the quartz crystal monitor was subtracted from the average metal-coated protein diameter to obtain the lac repressor's diameter. The Pt-C-coated particle diameter distributions also did not differ significantly from log normal. While doing this work it was discovered that outgassing the Pt-C electron gun greatly affected Pt-C film granularity: 19 sec produced a high contrast, granular Pt-C film, whereas 120 sec yielded a low contrast, less granular Pt-C film. Both gold balls and protein particles were subjected in separate experiments to either 19 or 120 sec of outgassing of the Pt-C gun prior to Pt-C replication. Outgassing had a profound effect on the average size of the Pt-C shadow widths on both gold and protein particles. The Pt-C gun outgassing procedure also determined the smallest replicated particle that could be resolved. The frequency of some smaller gold ball sizes detected after replication was reduced disproportionately with 19 sec vs. 120 sec outgassing. However, Pt-C gun outgassing did not affect the average measured diameter of the Pt-C-coated protein particles. The "geometric assumption" that each metal-coated particle creates a shadow width the same size as the metal-coated particle diameter was tested using a globular protein. Pt-C replication of protein particles at a 45 degree and 20 degree angle could not confirm the geometric assumption because an average shadow width was always significantly larger than its average Pt-C-coated particle diameter. A model for how the large shadow widths are formed is presented. Gold balls were also replicated at a 45 degree angle with current high resolution conditions at a substrate temperature of -185 degrees C, and the results of these replicas were compared to the results reported here at approximately -100 degrees C.

Calibration↗

Aggregation of finite-size particles with variable mobility.

New model equations are derived for dynamics of aggregation of finite-size particles. The differences from standard Debye-Hückel and Keller-Segel models are that the mobility of particles depends on the configuration of their neighbors and linear diffusion acts on locally averaged particle density. The evolution of collapsed states in these models reduces exactly to finite-dimensional dynamics of interacting particle clumps. Simulations show these collapsed (clumped) states emerge from smooth initial conditions, even in one spatial dimension. Extensions to two and three dimensions are also discussed.

Journal Article↗

Airborne concentrations and particle size distribution of allergen derived from domestic cats (Felis domesticus). Measurements using cascade impactor, liquid impinger, and a two-site monoclonal antibody assay for Fel d I.

The recent development of a sensitive two-site monoclonal antibody immunoassay for the major cat allergen (Fel d I) has made it possible to make accurate measurements of airborne cat allergen using low volume samplers that do not disturb the room. Houses with cats had from 2 to 20 ng Fel d I/m3 air compared with less than 0.2 ng/m3 in houses without cats. Using a cascade impactor and a multistage liquid impinger, the particle size distribution of airborne Fel d I in nine houses was 75% on particle greater than or equal to 5 microns in diameter and 25% (range, 10 to 62%) on particles less than or equal to 2.5 microns. In a cat vivarium with 12 cats, the air contained 40 ng Fel d I/m3, but less than 2% was detected on particles less than or equal to 2.5 microns. The air exchange rate in the vivarium (approximately 15 changes/h) appears to be the major difference from domestic houses (less than 0.5 changes/h). Repeated studies in one house confirmed a very high proportion (approximately 60%) of Fel d I on small particles. During domestic cleaning, the levels of small particle allergen in this house approached those produced by a nebulizer for bronchial provocation, i.e., 40 ng/m3. These results show unequivocally that significant airborne Fel d I is associated with small particles, which remain airborne for long periods. These findings are strikingly different from previous results obtained with airborne dust mite allergen. The results provide an explanation for the distinctive rapid onset of asthma or rhinitis in patients allergic to cats and a basis for designing a policy to reduce airborne allergen in houses with cats.

Air Conditioning↗

Chylomicron particle size and number, factor VII activation and dietary monounsaturated fatty acids.

This study evaluated the effects of substituting dietary saturated fatty acids (SFAs) with monounsaturated fatty acids (MUFAs) on postprandial chylomicron (triacylglycerol (TAG), apolipoprotein B-48 (apo B-48) and retinyl ester (RE)), chylomicron particle size and factor VII (FVII) response when subjects were given a standard meal. In a controlled sequential design, 51 healthy young subjects followed an SFA-rich diet (Reference diet) for 8 weeks after which half of the subjects followed a moderate MUFA diet (n=25) and half followed a high MUFA diet (n=26) for 16 weeks. Fasting lipoprotein and lipid measurements were evaluated at baseline and at 8-week intervals during the Reference and MUFA diets. In 25 of the subjects (n=12 moderate MUFA, n=13 high MUFA), postprandial responses to a standard test meal containing RE and 13C-tripalmitin were investigated at the end of the Reference and the MUFA diet periods. Although there were no differences in the postprandial lipid markers (TAG, RE, 13C-TAG) on the two diets, the postprandial apo B-48 response (incremental area under the curve (IAUC)) was reduced by 21% on the moderate MUFA diet (NS) and by 54% on the high MUFA diet (P<0.01). The postprandial peak concentrations of apo B-48 were reduced by 33% on the moderate MUFA diet (P<0.01) and 48% on the high MUFA diet (P<0.001). Fasting values for factor VII activity (FVIIc), activated factor VII (FVIIa) or factor VII antigen (FVIIag) did not differ significantly when subjects were transferred from Reference to MUFA diets. However, the postprandial increases in coagulation FVII activity (FVIIc) were 18% lower and of activated FVII (FVIIa) were 17% lower on the moderate MUFA diet (NS). Postprandial increases in FVIIc and FVIIa were 50% (P<0.05) and 29% (P<0.07) lower on the high MUFA diet and the area under the postprandial FVIIc response curve (AUC) was also lower on the high MUFA diet (P<0.05). Significantly higher ratios of RE:apo B-48 (P<0.001) and 13C-palmitic acid:apo B-48 (P<0.01) during both MUFA diets suggest that the CMs formed carry larger amounts of dietary lipids per particle, reflecting an adaptation to form larger lipid droplets in the enterocyte when increased amounts of dietary MUFAs are fed. Smaller numbers of larger chylomicrons may explain attenuated activation of factor VII during the postprandial state when the background diet is rich in MUFA.

Adult↗

Low-density lipoprotein particle size is inversely related to plasminogen activator inhibitor-1 levels. The Insulin Resistance Atherosclerosis Study.

High levels of plasminogen activator inhibitor-1 (PAI-1) and preponderance of small dense low-density lipoproteins (LDL) have both been associated with atherosclerotic disease and with the insulin resistance syndrome (IRS). In vitro studies have shown a stimulatory effect of various lipoproteins on PAI-1 release from different cells, including endothelial cells and adipocytes. The authors sought to investigate the relation of PAI-1 to LDL particle size in a large tri-ethnic population (n=1549) across different states of glucose tolerance. LDL size was determined by gradient gel electrophoresis, and PAI-1 was measured by a 2-site immunoassay, sensitive to free PAI-1. PAI-1 was inversely related to LDL size in the overall population (r=-0.21, P<0.0001), independent of gender and ethnicity. However, the authors found a significant interaction with glucose tolerance status (P=0.035). In univariate analysis, the association between PAI-1 and LDL size was most pronounced in subjects with normal glucose tolerance (NGT, r=-0.22, P<0.0001) and weaker in impaired glucose tolerance (IGT, r=-0.12, P=0.03) and type-2 diabetes (r=-0.10, P=0.02). After adjustment for demographic variables and metabolic variables known to influence PAI-1 levels (triglyceride and insulin sensitivity), a significant inverse relation of LDL size to PAI-1 levels was only present in NGT (P=0. 023). In subjects with IGT or overt diabetes, who usually have elevated PAI-1 levels, additional factors other than LDL size seem to contribute more importantly to PAI-1 levels. The demonstrated inverse relation of LDL size and PAI-1 levels provides one possible explanation for the atherogeneity of small dense LDL particles.

Adipose Tissue↗

Particle size distribution and chemical composition of coal-tar fumes.

The study was intended to characterize the chemical and physical nature of coal-tar fumes emitted from spreading applications of coal tar. Two separate experiments were performed. The first resulted in the determination of a coal-tar fume particle size distribution. The second experiment resulted in the identification of the primary compounds found in collected tar fumes and a determination of their relative concentration.

Air Pollutants↗

TNT particle size distributions from detonated 155-mm howitzer rounds.

To achieve sustainable range management and avoid or minimize environmental contamination, the Army needs to know the amount of explosives deposited on ranges from different munitions and how these are degraded and transported under different geological and climatic conditions. The physical form of the deposited explosives has a bearing on this problem, yet the shapes and size distributions of the explosive particles remaining after detonations are not known. We collected residues from 8 high-order and 6 low-order non-tactical detonations of TNT-filled 155-mm rounds. We found significant variation in the amount of TNT scattered from the high-order detonations, ranging from 0.00001 to 2% of the TNT in the original shell. All low-order detonations scattered percent-level amounts of TNT. We imaged thousands of TNT particles and determined the size, mass and surface-area distributions of particles collected from one high-order and one low-order detonation. For the high-order detonation, particles smaller than 1 mm contribute most of the mass and surface area of the TNT scattered. For the low-order detonation, most of the scattered TNT mass was in the form of un-heated, centimeter-sized pieces whereas most of the surface area was again from particles smaller than 1 mm. We also observed that the large pieces of TNT disintegrate readily, giving rise to many smaller particles that can quickly dissolve. We suggest picking up the large pieces of TNT before they disintegrate to become point sources of contamination.

Explosions↗

Micrometer-sized particles in cerebrospinal fluid (CSF) in patients with schizophrenia.

The etiology of schizophrenia is unknown, but the pathogenetic process involves organic changes in brain tissue, which may alter the composition of cerebrospinal fluid (CSF). For the present study, CSF was obtained by lumbar puncture from 22 schizophrenic patients and 38 control patients. We have used scanning electron microscopy combined with filtration techniques to search for pathogenic correlates and diagnostic biomarkers in the nano-micrometer range. Micrometer-sized spherical particles were isolated from CSF in 20 of the 22 patients with schizophrenia compared to only two of the 38 controls (P < 0.001). Reverse transcription-polymerase chain reaction analysis did not reveal bacterial DNA material in the particles. The particles have not replicated in culture. The micrometer-sized particles may serve as biological disease markers in schizophrenia. Hypothetically, they may be involved in development of the disease or may result from the disease process in brains of schizophrenic patients.

Adult↗

Time course of nodal enhancement with CT X-ray nanoparticle contrast agents: effect of particle size and chemical structure.

RATIONALE AND OBJECTIVES: Levels of CT enhancement in rabbit lymph nodes were followed with time after subcutaneous injection of four iodinated, insoluble nanoparticle contrast agents to provide experimental support for the hypothesis that clearance of these agents is related to the chemical structure of the agent itself. The impact of particle size was also studied. METHODS: Subcutaneous injections (2 x 0.25 mL) were made in the dorsum of rabbit paws with 15% suspensions of four nanoparticle contrast agents. Images were obtained at 4, 10, 24, 48, and 72 hours and 5, 7, and 14 days after injection. Average attenuation (in Hounsfield units [HU]), node volume, and total iodine uptake were estimated from the CT scans for each lymph node at each time point. RESULTS: All the agents provided adequate enhancement of both the popliteal and axillary lymph nodes of the rabbit (ie, > delta100 HU). Lymph node volume appears to be related to the persistence of enhancement, with long-lived agents demonstrating the greatest increase in size. The rate of clearance from the lymph nodes is related to the structure of the agent. CONCLUSIONS: Clearance of insoluble, iodinated nanoparticle contrast agents from lymph nodes can be modulated by changes in the structure of the agent itself. Using the same agent, smaller particles deliver material to the lymph nodes more quickly and clear more quickly.

Animals↗

Particle size distribution as a useful tool for microbial detection.

Worldwide, raw or treated wastewater is used for irrigation. However, this practice implies that the microbial content must be controlled. Unfortunately, detection techniques for microorganisms are costly, time consuming, and require highly trained personnel. For these reasons, this study used particle size distribution to measure the microbial quality of wastewater through correlations between the number or volume of particles and the concentration of fecal coliforms, Salmonella spp. and helminth ova. Such correlations were obtained for both raw and chemically treated wastewater. The best fit was the one for helminth ova, which applies for both the influent and effluent and also for all the coagulants involved. This technique allows the on-line quantification of helminth ova at a cost of US$3 and it takes only 5 minutes, instead of the US$70 and 5 days for the standard technique. With respect to the coagulants applied, their behavior is different only for particles smaller than 8 microm, and thus this value is considered as the critical size for this particular treatment. The best coagulant was the aluminium polychloride. In addition, this work establishes the distribution of COD, TSS, nitrogen, and phosphorous for particles smaller and larger than 20 microm.

Agriculture↗

Time-of-flight aerodynamic particle size analyzers: their use and limitations for the evaluation of medical aerosols.

Time-of-flight (TOF) aerosol analyzers are a class of instruments that measure the aerodynamic diameter of individual particles following a controlled acceleration in a well-defined flow field. Two instruments have been used to analyze the size of medical aerosols: Aerosizer particle size analyzer (TSI Particle Instruments/Amherst, Amherst, MA), Aerodynamic Particle Sizer (APS) aerosol spectrometer (TSI) Both instruments are capable of sizing several thousand particles a second, making it possible to obtain aerodynamic particle size distributions in a few seconds compared with up to 1 hour per measurement using compendial methods that are based on either the multistage liquid impinger or cascade impactor. This rapidity makes TOF analysis attractive for product development, as many different variables can potentially be investigated during a short period of time. The data thus obtained should be used with caution, however. Several issues, most notably the lack of a direct relationship with the mass of drug substance present and the vulnerability of the measurements to coincidence effects when sampling concentrated aerosols, may severely limit the value of data from many aerosol delivery systems, especially pressurized metered dose inhalers (pMDIs). A review of the literature illustrating the issues that are involved and providing guidance on the most appropriate uses of these analyzers is presented.

Aerosols↗

Metal content and particle size distribution of street sediments and street sweeping waste.

During recent years the interest in street sweeping as a pollutant control measure has increased. For planning of street sweeping programs and disposal of street sweeping waste there is a need to investigate the composition of street sweeping waste and the effect of street sweeping on the remaining sediments on the street. Particle size distribution and heavy metal concentration has been measured for street sweeping waste, street sediments before sweeping and remaining sediments after sweeping. The results show that the concentrations of heavy metals are a function of particle diameter and proportional to the inverse of the particle diameter, i.e. the highest concentrations are found in finest fractions. Regression equations for metal concentrations as a function of particle diameter are presented. According to Swedish guidelines for environmental quality of contaminated sites, heavy metal concentration in the sweeping waste can not be considered as a serious problem. The largest amount of metals and sediment is found in the sandy fractions (0.125-0.5 mm). The street sweeper is more effective in removing coarse sediments than fine. This means that the street sediments after sweeping are finer than the sediments before.

Cities↗

A new method for HDL particle sizing by polyacrylamide gradient gel electrophoresis using whole plasma.

Low plasma levels of HDL cholesterol have been associated with an increased risk of coronary heart disease. HDL particles are heterogeneous with respect to size and apolipoprotein content. The objective of the present study was to develop a method to generate lipid-stainable calibrators that would allow the assessment of HDL particle size from whole plasma, using polyacrylamide gradient gel electrophoresis (PAGGE). Lipid-stainable HDL calibrators were obtained by subjecting isolated red blood cells to hemolysis either by freezing at -20 or -80 degrees C overnight or by rapid exposure to liquid nitrogen and mixing of the hemolysis products with plasma aliquots. All three methods were highly reproducible in producing Sudan black lipid-stainable HDL calibrators ranging from 75 to 200 A. The assessment of HDL particle size with these lipid-stainable HDL calibrators was also highly reproducible, with a coefficient of variation below 5.5%. These lipid-stainable HDL calibrators simplify the assessment of HDL particle size by PAGGE using whole plasma, without the need for costly, time-consuming ultracentrifugation procedures.

Calibration↗

Particle size studies for subcutaneous delivery of poly(lactide-co-glycolide) microspheres containing ovalbumin as vaccine formulation.

The primary objectives of the present study were to produce poly(lactide-co-glycolide) (PLGA) microspheres with different diameters, to characterize these microspheres which were loaded with a model antigen, ovalbumin and to evaluate the effect of microsphere particle size on the serum antibody levels following administration to mice. Four kinds of ovalbumin-loaded PLGA microspheres with different diameters (1.2, 3.5, 7.0 and 14.3 microns as mean volume diameter) were manufactured by a w/o/w emulsion/solvent evaporation method. Low loading percent (0.08%-0.25% w/w) and efficiencies (8-25% w/w) were observed. Examination using scanning electron photomicrographs showed smooth spherical particles. The in-vitro release of ovalbumin from microspheres showed an expected burst release with all batches and the extent of the burst release increased with decreasing diameters of spheres; PLGA microspheres with the smallest diameter (1.2 microns) showed an 80% burst release within one day. Approximately 10-60% of ovalbumin remained unreleased 30 days later. The single subcutaneous administrations of ovalbumin-loaded PLGA microspheres with different diameters to mice induced good antibody responses above ovalbumin saline negative controls at 3, 6, 9, and 12 weeks after inoculation. Especially, 0.16% ovalbumin-loaded PLGA microspheres having mean volume diameter of 3.5 microns exhibited the best immune responses with values greater than those obtained after inoculation with adjuvants such as complete Freund's adjuvant or alum as positive control. The strong adjuvant activity of PLGA microspheres as vaccine formulation was suggested.

Alum Compounds↗