PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “SOIL”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources

Adsorption, sequestration, and bioaccessibility of As(V) in soils.

The influence of various soil physical and chemical properties (Fe and Mn oxides, pH, cation exchange capacity, total inorganic and organic carbon, and particle size) on As(V) adsorption, sequestration, and relative bioaccessibility (as a surrogate for oral bioavailability) was investigated in a wide range of well-characterized soils over a 6-month period. Arsenic(V) bioaccessibility was measured using a streamlined version of a physiologically based extracton test (PBET), designed to replicate the solubility-limiting conditions in a child's digestive tract. The soil's dithionite-citrate-bicarbonate (DCB) extractable Fe oxide content was the most important land only statistically significant) soil property controlling the initial degree of adsorption. Sequestration, as measured by the reduction in bioaccessibility over time, occurred to a significant extent in 17 of 36 (47.2%) soils over the first 3 months. In contrast, only 4 of 36 (11.1%) soils exhibited a significant reduction in bioaccessibility from 3 to 6 months. Soil pH was the most important (and only statistically significant) soil property affecting the decrease in bioaccessibility upon aging for 6 months. Soils with pH < 6 generally sequestered As(V) more strongly over time, whereas those with pH > 6 generally did not. The Fe oxide content and pH were the most important soil properties governing the steady-state bioaccessibility of As(V) in soil. Two multivariable linear regression models of steady-state As(V) bioaccessibility were developed using soil properties as independent variables. Generally, soils having higher Fe oxide content and lower soil pH exhibited lower bioaccessibility. These models were able to account for approximately 75-80% of the variability in steady-state bioaccessibility and independently predict bioaccessibility in five soils within a root-mean-square error (RMSE) of 8.2-10.9%. One of these models was also able to predict within an RMSE of 9.5% the in vivo bioavailability of As in nine contaminated soils previously used in swine dosing trials. These results indicate the bioaccessibility, and thus, potentially the bioavailability of otherwise soluble As(V) added to soils (i.e., the worst-case bioavailability scenario) is significantly reduced in some soils over time, particularly those with lower pH and higher Fe oxide content. These results also provide a means of estimating As(V) bioaccessibility and bioavailability on the basis of soil properties.

Adsorption↗

EPA SITE demonstration of the BioTrol soil washing process.

A pilot-scale soil washing process, patented by BioTrol, Inc., was demonstrated on soil contaminated by wood treating waste, primarily pentachlorophenol (PCP) and creosote-derived polynuclear aromatic hydrocarbons (PAHs). Although soil washing was the main object of this demonstration, the treatment train that was evaluated included two other BioTrol technologies for treatment of waste streams from the soil washer. The three technologies were: The BioTrol Soil Washer (BSW)--a volume reduction process, which uses water to separate contaminated soil fractions from the bulk of the soil. The BioTrol Aqueous Treatment System (BATS)--a biological water treatment process. The Slurry Bioreactor (SBR)--a BioTrol biological slurry treatment process conducted in an EIMCO BIOLIFT reactor. The sandy soil at the site, consisting of less than 10 percent of fines, was well suited for treatment by soil washing. The soil washer was evaluated in two tests on soil samples containing 130 ppm and 680 ppm of PCP, respectively. The BSW successfully separated the feed soil (dry weight basis) into 83 percent of washed soil, 10 percent of woody residues, and 7 percent of fines. The washed soil retained about 10 percent of the feed soil contamination while 90 percent of the feed soil contamination was contained within the woody residues, fines, and process water. The soil washer achieved up to 89 percent removal of PCP and 88 percent of total PAHs, based on the difference between their levels in the as-is (wet) feed soil and the washed soil.(ABSTRACT TRUNCATED AT 250 WORDS)

Environmental Pollution↗

Evaluation of a rat model versus a physiologically based extraction test for assessing phenanthrene bioavailability from soils.

The soil matrix can impact the bioavailability of soil-bound organic chemicals, and this impact is governed in part by soil properties such as organic carbon (OC) content, clay minerals, and pH. Recently, a physiologically based extraction test (PBET) was developed to predict the bioavailability of soil-bound organic chemicals. In the current study, the bioavailability of phenanthrene (PA) from laboratory-treated soils varying in OC content, clay, and pH was investigated using an in vivo rat model and an in vitro PBET. The relationship between these two approaches was also examined. In the in vivo assay, soils and corn oil containing equivalent levels of PA were administered to Sprague-Dawley rats by gavage at two dose levels: 400 and 800 mg/kg body weight. Equivalent doses were given via intravenous injection (i.v.). The areas under the blood concentration-versus-time curves (AUC) were measured, and the absolute and relative bioavailabilities of PA were determined for each soil. In the PBET tests, one g of each soil was extracted by artificial saliva, gastric juice, duodenum juice, and bile. The fraction of PA mobilized from each soil was quantified. The AUCs of PA in all soils were significantly lower than those following iv injection (p < 0.05), indicating that the soil matrix could reduce the bioavailability of PA from soil. There were obvious trends of soils with higher OC content and clay content, resulting in the lower bioavailability of PA from soil. A significant correlation (p < 0.05) was observed between the fraction of PA mobilized from soil in the PBET and its in vivo bioavailability. The data also showed that the absolute bioavailability of PA from corn oil was low: approximately 25%. These results suggest that PBET assay might be a useful alternative in predicting bioavailability of soil-bound organic chemicals. However, due to the limited soil types and use of one chemical vs. a variety of contaminants and soil properties in the environment, further efforts involving more chemicals and soil types are needed to validate this surrogate method.

Administration, Oral↗

[Spatial variability of soil moisture, nutrients, and productivity on slopeland in loessial semiarid region].

For the sustainable development and ecological construction in the loessial semiarid region, it is important to describe the variability of slopeland soil properties and the affecting factors of slopeland productivity. In this study, soil samples were taken from eroded steep slopeland, and leaf area index (LAI) and above-ground biomass (AGB) were measured at the sampling locations. The soil water content (WC) of 2 m depth at 20 cm intervals, and the soil organic matter (OM), total nitrogen (TN), total phosphorus (TP), available nitrogen (AN) and available phosphorus (AP) contents of 0-20 and 20-40 cm soil layers were determined in the laboratory. The results showed that the majority of the properties was normally distributed, and the nutrient contents were higher in 0-20 cm than in 20-40 cm layer, but the variations of soil nutrients were much smaller in 0-20 cm than in 20-40 cm layer. Soil nutrients had a significantly larger variation than soil moisture. Soil nutrient contents in 20-40 cm layer kept increasing from upslope to downslope, while those in 0-20 cm layer varied slightly. Slope topography had more obvious impact on soil organic matter, total nitrogen and available phosphorus than other affecting factors. Soil water and nutrient contents on the shallow gully trough were notably higher than those on the upslope, but above-ground biomass was less than that on the upslope. Though longitudinal slope (35 degrees-45 degrees) was obviously larger than the horizontal one (5 degrees-10 degrees), horizontal slope position had a greater influence on soil nutrients, but much weaker effect on soil moisture than longitudinal direction. There were significant correlations between 0-120 cm soil moisture and 20-40 cm soil nutrients, and among soil nutrients except 0-20 cm soil available phosphorus. Slopeland position had a great impact on soil moisture and nutrients, but soil moisture and/or nutrients had no significant impact on above-ground biomass.

Biomass↗

Effect of cadmium on microbial activity and a ryegrass crop in two semiarid soils.

Soil pollution with Cd is an environmental problem common in the world, and it is necessary to establish what Cd concentrations in soil could be dangerous to its fertility from toxicity effects and the risk of transference of this element to plants and other organisms of the food chain. In this study, we assessed Cd toxicity on soil microorganisms and plants in two semiarid soils (uncultivated and cultivated). Soil ATP content, dehydrogenase activity, and plant growth were measured in the two soils spiked with concentrations ranging from 3 to 8000 mg Cd/kg soil and incubated for 3 h, 20 days, and 60 days. The Cd concentrations that produced 5% 10%, and 50% inhibition of each of the two soil microbiological parameter studied (ecological dose, ED, values) were calculated using two different mathematical models. Also, the effect of Cd concentration on plant growth of ryegrass (Lolium perenne, L.) was studied in the two soils. The Cd ED values calculated for soil dehydrogenase activity and ATP content were higher in the agricultural soils than in the bare soil. For ATP inhibition, higher ED values were calculated than for dehydrogenase activity inhibition. The average yields of ryegrass were reduced from 5.03 to 3.56 g in abandoned soil and from 4.21 to 1.15 g in agricultural soil with increasing concentrations of Cd in the soil. Plant growth was totally inhibited in abandoned and agricultural soils at Cd concentrations above 2000 and 5000 mg/kg soil, respectively. There was a positive correlation between the concentration of Cd in the plants and the total or DTPA-extractable concentrations of Cd in the soil.

Adenosine Triphosphate↗

Adsorption and desorption characteristics of hydrophobic pesticide endosulfan in four Indian soils.

Adsorption and desorption characteristics of endosulfan in four Indian soils were studied extensively. The soils used were clayey soil (CL--lean clay with sand), red soil (GM--silty gravel with sand), sandy soil (SM--silty sand with gravel) and composted soil (PT--peat) as per ASTM (American Society for Testing and Materials) standards. Adsorption and desorption rates were calculated from kinetic studies. These values varied for alpha and beta endosulfan depending on the soil type. Maximum specific adsorption capacities (qmax) for different soils were calculated by Langmuir model. The values varied from 0.1 to 0.45 mg g(-1) for alpha endosulfan and 0.0942-0.2722 mg g(-1) for beta endosulfan. Maximum adsorption took place in clay soil followed by composted soil and red soil. Adsorptions of alpha and beta endosulfan were negligible in sand. The binding characteristics of various functional groups were calculated using Scatchard plot. Effect of functional groups was more predominant in clayey soil. Organic matter also played a significant role in adsorption and desorption of endosulfan. Endosulfan adsorption decreased drastically in clay soil when the pH was reduced. Desorption was higher at both acidic and alkaline pH ranges compared to neutral pH. Results indicated that alpha endosulfan is more mobile compared to beta endosulfan and mobility of endosulfan is maximum in sandy soil followed by red soil. It can be inferred that crystal lattice of the clay soil plays a significant role in endosulfan adsorption and desorption. Immobilization of endosulfan is more advisable in clay soil whereas biological and or chemical process can be applied effectively for the remediation of other soil types.

Adsorption↗

Adsorption, oxidation, and bioaccessibility of As(III) in soils.

At As-contaminated sites, where the ingestion of soil by children is typically the critical human-health exposure pathway, information on the bioavailability of soil-bound As is often limited. The influence of various soil physical and chemical properties (iron and manganese oxides, pH, cation exchange capacity, total inorganic and organic carbon, and particle size) on As(III) adsorption, sequestration, bioaccessibility (as a surrogate for oral bioavailability), and oxidation was investigated in 36 well-characterized soils by use of a physiologically based extraction test (PBET). These results were compared to an earlier published study with As(V) on the same set of soils. The properties of the soils were able to explain >80% of the variability in the adsorption and sequestration (as measured by the reduction in bioaccessibility over time) of As(III) in these soils. The initial bioaccessibility of As(III) was significantly higher than the initial bioaccessibility of As(V) on the same set of soils. However, over a 6-month period of aerobic aging, a significant portion of the solid-phase As(III) on these soils was oxidized to As(V), decreasing its bioaccessibility markedly. A multivariable linear regression model previously developed to predict the steady-state bioaccessibility of As(V) in soils was able to predict the bioaccessibility in As(III)-spiked soils within a root-mean-square error (RMSE) of 16.8%. Generally, soils having a higher iron oxide content and lower soil pH exhibited lower bioaccessibility. This model was also able to predict the in vivo bioavailability of As in contaminated soils previously used in an independent juvenile swine dosing trial within an RMSE of 15.5%, providing a greatly improved yet conservative estimate of bioavailability relative to the typical default assumption of 100%. However, the model was not able to accurately predict the bioavailability of As in a different set of contaminated soils previously used in an independent Cebus monkey dosing trial, consistently overpredicting the bioavailability, resulting in an RMSE of 42.7%. This model can be used to provide an initial estimate of As bioavailability in soil to aid in screening sites and justifying expensive site-specific animal feeding studies. Further, as the model is based on major soil properties, the resulting estimates are valid as long as the major soil properties do not change, thus providing some confidence in the long-term applicability of the estimates.

Adsorption↗

Long-term aging of copper added to soils.

Aging refers to the processes by which the mobility and bioavailability/toxicity of metals added to soil decline with time. Although long-term aging is a key process that needs to be considered in the risk assessment of metals in field soils, the long-term aging of Cu added to soils has not been studied in detail. In this study, the effects of aging on Cu isotopic exchangeability, total Cu in soil pore water, pore water free Cu2+ activity, and "available" Cu measured by the technique of diffusive gradient in thin film (DGT-Cu) were investigated in 19 European soils at two total Cu concentrations shown to inhibit plant (tomato) growth by 10 and 90%. After addition of Cu, the soils were leached, incubated outdoors, and sampled regularly over a 2-year period. The results showed that when water soluble Cu was added to soils, concentrations of Cu determined by each of the techniques tended to decrease rapidly initially, followed by further decreases at slow rates. Soil pH was a vital factor affecting the aging rate of Cu added to soils. The relatively low solubility products and low isotopic exchangeabilities of Cu in calcareous soils immediately after addition of soluble Cu2+ suggested Cu2+ probably precipitated in these soils as Cu2(OH)2CO3 (malachite) and Cu(OH)2. Isotopic dilution was found to be a robust technique for measuring rates of long-term aging reactions. A semi-mechanistic model was developed to describe the rate and extent of Cu aging across soils as affected by soil pH and other physicochemical parameters. Although not measured directly, it is inferred from soil physicochemical controls on Cu aging that processes of precipitation/nucleation of Cu in soils and hydrolysis of Cu2+ followed by a diffusion process controlled the decrease in Cu availability with time. The model was validated by testing it against field soils with different contamination histories and was found to successfully predict the isotopic exchangeability of Cu added to soils based on two parameters: soil pH and time.

Copper↗

A comparison of techniques used to estimate the amount of resuspended soil on plant surfaces.

The objectives of this study were to compare four common techniques used to estimate soil mass loadings on plant surfaces and to assess the need to account for particle-size distributions of both the soil tracer and contaminant of concern within the soil. Soil loadings (g soil kg-1 dried plant) from split samples collected in a pasture near Chernobyl were estimated using soil tracers of plutonium analyzed via alpha spectroscopy (mean +/- standard error; 1.0 +/- 0.2), titanium analyzed with an inductive coupled plasma spectrometer; (3.6 +/- 0.6), and neutron activation analysis for scandium (8.1 +/- 1.6), as well as simply washing the soil off the vegetation (34.1 +/- 5.6) Differences were significant at p < 0.001. We also found that soil loading estimates from any one technique varied by a factor of 10 depending on the soil particle size used in the calculations. This was because soil loadings decreased when smaller-sized soil fractions dominated the resuspension process. However, the percent of the plant's total contamination attributable to soil loading increased with smaller soil particles. Smaller soil particles apparently contribute less to the mass of soil loading (g soil kg-1 dry plant), but more to the total plant contamination (Bq) because of the higher concentration of contaminant found in the smaller-sized soil fractions. Differences in mass loading estimates due to the technique chosen (a factor of 10), or due to differences in elemental concentration as a result of the soil particle size used in the calculation (also a factor of 10), were greater than the natural variability observed in the field (2.5).

Alpha Particles↗

Potential nitrification rate as a tool for screening toxicity in metal-contaminated soils.

A potential nitrification rate test (PNR) was used to identify metal toxicity in field-contaminated soils. The test was applied to metal salt-spiked soils, to 27 uncontaminated soils, and to 15 soils that are contaminated by former metal smelting activities. Four agricultural soils (pH 4.5-6.6) were spiked with various rates of CdCl2 (0-200 mg Cd/kg dry wt) or ZnCl2 (0-3,000 mg Cd/kg dry wt) and were equilibrated more than nine months prior to testing. The soil Zn EC50s of the PNR were between 150 and 350 mg Zn/kg dry weight. No continuous decrease of the nitrification with increasing Cd application was observed. The nitrification rate was reduced by between 50 and 80% at the highest Cd application in all soils. The PNRs of 27 uncontaminated soils varied widely (0-21 mg N/kg/d), but most of this variability is explained by soil pH (R2 = 0.77). The PNRs of the 15 contaminated soils were 0 to 44% of the values predicted for an uncontaminated soil at corresponding pH. Significant toxicity in field-contaminated soils was identified if the PNR was outside the 95% prediction interval of the PNR for an uncontaminated soil at corresponding pH and was found in seven soils. These soils contain 160 to 34,000 mg Zn/kg dry weight and 5 to 104 mg Cd/kg dry weight and had a pH >5.7. No toxicity could be detected below pH 5.6, where even a zero PNR value is within the 95% prediction interval of uncontaminated soils. It is concluded that the nitrification is sensitive to metal stress but that its power as a soil bioassay is low because of the high variability of the endpoint between uncontaminated soils. The ecological significance of the assay is discussed.

Environmental Monitoring↗

Soil resource availability impacts microbial response to organic carbon and inorganic nitrogen inputs.

Impacts of newly added organic carbon(C) and inorganic nitrogen (N) on the microbial utilization of soil organic matter are important in determining the future C balance of terrestrial ecosystems. We examined microbial responses to cellulose and ammonium nitrate additions in three soils with very different C and N availability. These soils included an organic soil (14.2% total organic C, with extremely high extractable N and low labile C), a forest soil (4.7% total organic C, with high labile C and extremely low extractable N), and a grassland soil (1.6% total organic C, with low extractable N and labile C). While cellulose addition alone significantly enhanced microbial respiration and biomass C and N in the organic and grassland soils, it accelerated only the microbial respiration in the highly-N limited forest soil. These results indicated that when N was not limited, C addition enhanced soil respiration by stimulating both microbial growth and their metabolic activity. New C inputs lead to elevated C release in all three soils, and the magnitude of the enhancement was higher in the organic and grassland soils than the forest soil. The addition of cellulose plus N to the forest and grassland soils initially increased the microbial biomass and respiration rates, but decreased the rates as time progressed. Compared to cellulose addition alone, cellulose plus N additions increased the total C-released in the grassland soil, but not in the forest soil. The enhancement of total C-released induced by C and N addition was less than 50% of the added-C in the forest soil after 96 d of incubation, in contrast to 87.5% and 89.0% in the organic and grassland soils. These results indicate that indigenous soil C and N availability substantially impacts the allocation of organic C for microbial biomass growth and/or respiration, potentially regulating the turnover rates of the new organic C inputs.

Analysis of Variance↗

Soil microbial community response to land use change in an agricultural landscape of western Kenya.

Tropical agroecosystems are subject to degradation processes such as losses in soil carbon, nutrient depletion, and reduced water holding capacity that occur rapidly resulting in a reduction in soil fertility that can be difficult to reverse. In this research, a polyphasic methodology has been used to investigate changes in microbial community structure and function in a series of tropical soils in western Kenya. These soils have different land usage with both wooded and agricultural soils at Kakamega and Ochinga, whereas at Ochinga, Leuro, Teso, and Ugunja a replicated field experiment compared traditional continuous maize cropping against an improved N-fixing fallow system. For all sites, principal component analysis of 16S rRNA gene denaturing gradient gel electrophoresis (DGGE) profiles revealed that soil type was the key determinant of total bacterial community structure, with secondary variation found between wooded and agricultural soils. Similarly, phospholipid fatty acid (PLFA) analysis also separated wooded from agricultural soils, primarily on the basis of higher abundance of monounsaturated fatty acids, anteiso- and iso-branched fatty acids, and methyl-branched fatty acids in the wooded soils. At Kakamega and Ochinga wooded soils had between five 5 and 10-fold higher levels of soil carbon and microbial biomass carbon than agricultural soils from the same location, whereas total enzyme activities were also lower in the agricultural sites. Soils with woody vegetation had a lower percentage of phosphatase activity and higher cellulase and chitinase activities than the agricultural soils. BIOLOG analysis showed woodland soils to have the greatest substrate diversity. Throughout the study the two functional indicators (enzyme activity and BIOLOG), however, showed lower specificity with respect to soil type and land usage than did the compositional indicators (DGGE and PLFA). In the field experiment comparing two types of maize cropping, both the maize yields and total microbial biomass were found to increase with the fallow system. Moreover, 16S rRNA gene and PLFA analyses revealed shifts in the total microbial community in response to the different management regimes, indicating that deliberate management of soils can have considerable impact on microbial community structure and function in tropical soils.

Agriculture↗

Monitoring of petroleum hydrocarbon degradative potential of indigenous microorganisms in ozonated soil.

This study was performed to investigate the petroleum hydrocarbon (PH) degradative potential of indigenous microorganisms in ozonated soil to better develop combined pre-ozonation/bioremediation technology. Diesel-contaminated soils were ozonated for 0-900 min. PH and microbial concentrations in the soils decreased with increased ozonation time. The greatest reduction of total PH (TPH, 47.6%) and aromatics (11.3%) was observed in 900-min ozonated soil. The number of total viable heterotrophic bacteria decreased by three orders of magnitude in the soil. Ozonated soils were incubated for 9 weeks for bioremediation. The number of microorganisms in the soils increased during the incubation period, as monitored by culture- and nonculture-based methods. The soils showed additional PH-removal during incubation, supporting the presence of PH-degraders in the soils. The highest removal (25.4%) of TPH was observed during the incubation of 180-min ozonated soil during the incubation while a negligible removal was shown in 900-min ozonated soil. This negligible removal could be explained by the existence of relatively few or undetected PH-degraders in 900-min ozonated soil. After a 9-week incubation of the ozonated soils, 180-min ozonated soil showed the lowest TPH concentration, suggesting that appropriate ozonation and indigenous microorganisms survived ozonation could enhance remediation of PH-contaminated soil. Microbial community composition in 9-week incubated soils revealed a slight difference between 900-min ozonated and unozonated soils, as analyzed by whole cell hybridization. Taken together, this study provided insight into indigenous microbial potential to degrade PH in ozonated soils.

Hydrocarbons↗

Bioremediation of endosulfan contaminated soil and water -- optimization of operating conditions in laboratory scale reactors.

A mixed bacterial culture consisted of Staphylococcus sp., Bacillus circulans-I and -II has been enriched from contaminated soil collected from the vicinity of an endosulfan processing industry. The degradation of endosulfan by mixed bacterial culture was studied in aerobic and facultative anaerobic conditions via batch experiments with an initial endosulfan concentration of 50mg/L. After 3 weeks of incubation, mixed bacterial culture was able to degrade 71.58+/-0.2% and 75.88+/-0.2% of endosulfan in aerobic and facultative anaerobic conditions, respectively. The addition of external carbon (dextrose) increased the endosulfan degradation in both the conditions. The optimal dextrose concentration and inoculum size was estimated as 1g/L and 75mg/L, respectively. The pH of the system has significant effect on endosulfan degradation. The degradation of alpha endosulfan was more compared to beta endosulfan in all the experiments. Endosulfan biodegradation in soil was evaluated by miniature and bench scale soil reactors. The soils used for the biodegradation experiments were identified as clayey soil (CL, lean clay with sand), red soil (GM, silty gravel with sand), sandy soil (SM, silty sand with gravel) and composted soil (PT, peat) as per ASTM (American society for testing and materials) standards. Endosulfan degradation efficiency in miniature soil reactors were in the order of sandy soil followed by red soil, composted soil and clayey soil in both aerobic and anaerobic conditions. In bench scale soil reactors, endosulfan degradation was observed more in the bottom layers. After 4 weeks, maximum endosulfan degradation efficiency of 95.48+/-0.17% was observed in red soil reactor where as in composted soil-I (moisture 38+/-1%) and composted soil-II (moisture 45+/-1%) it was 96.03+/-0.23% and 94.84+/-0.19%, respectively. The high moisture content in compost soil reactor-II increased the endosulfan concentration in the leachate. Known intermediate metabolites of endosulfan were absent in all the above degradation studies.

Bacillus↗

Influence of copper fungicide residues on occurrence of earthworms in avocado orchard soils.

The compost worm Eisenia fetida was used to demonstrate the avoidance by worms of Cu contaminated soil. Soils were collected from two avocado orchards in north eastern New South Wales, Australia. In avoidance trials, worms preferred non-contaminated control soils, sourced from adjacent to the orchard or an OECD control soil, when Cu residues in the orchard soils reached 4-34 mg Cu kg(-1). At levels of 553 mg Cu kg(-1), 90% avoidance of orchard soil was observed. The worms showed preference for the soils in the order; uncontaminated field derived soil >OECD standard soil >Cu contaminated orchard soil. It was demonstrated that OECD standard soil was less favoured by worms than control soil derived from the test sites. While Cu was found to be the primary influence on worm avoidance in orchard soil, other factors, such as elevated soil Zn concentrations, could not be discounted. In a corresponding field study, it was shown that earthworms occurred at lower density in orchard soils with a history of Cu fungicide use. In one such orchard, soil Cu concentrations of up to 270 mg kg(-1) were determined and no earthworms were found, while nearby control sites and less contaminated sites within the orchard had up to 40.7 g m(-2) earthworm biomass. Considering the potential for Cu to accumulate in these soils and the subsequent impacts on soil biota, our results highlight the importance of limiting future application of Cu based fungicides.

Agriculture↗

Influence of climatic conditions and soil type on 99TcO4- uptake by rye grass.

Climatic changes over the long term will modify significantly the biosphere, with glaciation events probably taking place in the next 100 000 years. This is important to safety assessments of nuclear waste disposal facilities that contain high-level and long-lived waste. The soils will evolve toward new situations, and their properties will be consequently modified (e.g. an increase of soil organic matter may be expected in a cooler climate). These changes in soil properties would affect the mobility and the soil-to-plant transfer of radionuclides such as (99)Tc. This study aimed at simulating the cooling of climatic conditions for soils representative of a Jurassic limestone plateau, and the effect on transfer parameters of (99)TcO(4)(-) in the soil-plant systems was investigated. The cooler conditions were simulated by increasing elevation, a surrogate for climate change. Soils were sampled in similar geological background and topography at different elevations in the north east of France (Lorraine and Jura). Soil/solution distribution coefficients (K(d)) of (99)TcO(4)(-) were measured on soil samples in short-term batch experiments with 1:10 soil:solution ratio. Rye grass was grown on the soils spiked with (99)TcO(4)(-) at temperature regimes adapted to each soil. Also, two different temperature regimes (cold and temperate) were applied to one soil to test the effect of plant physiology and evapotranspiration on (99)TcO(4)(-) uptake. K(d) values did not show significant differences among soils in aerobic conditions, and were not significantly different from 0. During plant culture, reduction of (99)Tc was never totally achieved in soils, including in a peaty OM soil. Concentration ratios (CR) were calculated on a dry weight basis and ranged from 20 to 370. CR were always higher in high temperature regimes than in cold temperatures. They were also inversely correlated with soil organic matter (OM) content. A decrease of CR values from 5 to 10-fold was observed with increasing soil OM. Results suggested that the water holding capacity, in which (99)Tc is diluted, the nitrification potential of the soils and the evapotranspiration of plants (efficiency of uptake of soluble (99)TcO(4)(-)) were strongly involved in these differences.

Biological Availability↗

Distribution and fractionation of copper in soils of apple orchards.

BACKGROUND: Frequent application of Bordeaux mixture, which includes copper, as a fungicide in fruit and grape orchards may lead to copper accumulation in the soil, especially when orchard age and application times increase. The objectives of this study were: (i) to investigate the copper content and its spatial distribution in orchard soils; (ii) to identify the copper fractionation in soil and its relationship with plant uptake; (iii) to understand the characteristics of copper contamination in orchard soils. MATERIALS AND METHODS: Soil profile samples were taken in apple orchards with ages of 0, 5, 10, 20, 30 years and pot experiments were also carried out to study the effects of external copper input on copper fractionation. All soil samples were air-dried, ground and extracted with 0.43 mol L(-1) HNO3 for the total absorbed copper. Fractionation determination was conducted following Tessier and Shuman sequential extraction methods, and copper was measured with AAS. Plant samples were first dry ashed, dissolved with 6 mol L(-1) HCI and then copper and other elements were measured with ICP-MS. RESULTS AND DISCUSSION: Soil total Cu was higher in the apple orchards than that in non-orchard fields and was seen to have increased with orchard age. Soil Cu increased substantially with the average annual copper increase, ranging from 2.5 to 9 mg Cu kg(-1). The distribution of copper in the soil profile was uneven, decreasing from surface to deeper layers, and the differences were significant, but the contents in every layer were also significantly correlated with those in the next layers. For all copper fractions, the organically bound, crystalline Mn oxide bound, and amorphous Fe bound fractions extracted with the Shuman method were much higher than the exchangeable and residual fractions. Using the Tessier method, organically bound, carbonate bound and Fe-Mn oxide bound fractions were much higher. With an increase in external copper input, the organically bound, crystalline Mn oxide bound and amorphous Fe bound fractions in the Shuman method and organically bound, carbonate bound and Fe-Mn oxide bound fractions in the Tessier method all increased significantly, while the changes in other fractions were not significant. Soil total copper and copper fractions were found to have good correlations with apple tree uptake. Copper in fruit flesh had significant correlations with soil total content in the 0-10 cm layer, all the copper fractions in the 0-5 cm layer, and some fractions in the deeper layers. CONCLUSION: Copper content in orchard soils increased significantly with intensive application of Bordeaux mixtures and orchard age. Copper content decreased sharply from the topsoil to deeper soil layers. The copper contents in different layers also significantly correlated with those in the next layers. Dominant fractions of the copper in soil were mainly associated with organic matter, iron and manganese oxides and carbonates. A close relationship was found between the copper content in soils and in apple tree organs (which contained 8.9 to 66 mg kg(-1) Cu). RECOMMENDATION AND PERSPECTIVE: Though most copper in the soil was specifically adsorbed or immobilized, and copper was mainly distributed in topsoil, which was essentially devoid of roots, the copper concentration of fruit still had significantly positive correlations with soil copper and most copper fractions. Therefore, measures must be taken to control copper accumulation in orchard soils and to make the apple fruit production sustainable.

Agriculture↗

Redistribution index and relative binding intensity of heavy metals in salt-amended soils.

Redistribution processes of heavy metals and their binding intensity in salt-amended arid-zone soils were analyzed under saturated, field capacity and wetting-drying cycle moisture regimes. Two newly developed parameters, redistribution index and reduced partitioning parameter, were used to depict the removal/attainment of metal-amended soils from/to the fractional distribution pattern in the native soils and the relative binding intensity of metals in the amended soils, respectively. Metal-amended soils, in forms of salts approached the fractional distribution pattern in the non-amended soils with time. The rates at which the metal-amended arid-zone soils approached the fractional distribution pattern characteristic of the native soil were affected by the nature and loading levels of the metals, soil properties and time. Metals in amended soils at low loading levels approach the fractional distribution pattern characteristic of non-amended soil more rapidly than at high loading levels. The sequences of approach by various metals to the fractional distribution pattern in the native soil are as follows: Cd > Cu > Ni, Zn > Cr. Moisture regime, however, did not considerably affect the metal-amended soils' overall rates of approach to the fractional distribution pattern prevailing in the non-amended soils. The binding intensity of metals in soils was affected by the nature of metal, loading level, soil properties and time. In both non-amended and amended soils, Cr had highest binding intensity, Cd lowest and Cu, Ni and Zn intermediate. The binding intensity decreased with the loading level of the metals and increased with time. The redistribution index and reduced partitioning index can quantitatively and effectively depict the kinetics of redistribution processes of metals and their relatively binding intensity in waste-amended soils.

Desert Climate↗