PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Dentin”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources

Quantitative analysis of the dentin adhesive interface by Auger spectroscopy.

The ultimate success of a dentin adhesive bond is dependent in large part on specific conditions at the interface between the tooth and the adhesive. Most current dentin adhesive systems use some sort of pre-treatment to demineralize the first few microns of the dentin surface, leaving a meshwork of collagen into which the adhesive resin can penetrate, infiltrate, and polymerize. The general hypothesis tested in this experiment was that the penetration and distribution of adhesive resin into the demineralized zone are a function of the conditioner used as a pre-treatment for the adhesive application. Four commercially available adhesive systems were modified to incorporate hydroxyethylthiomethacrylate (HETMA), a sulfur-substituted, traceable analogue of 2-hydroxyethylmethacrylate (HEMA), thereby allowing for a qualitative measurement of the amount and distribution of monomer in the treated dentin substrate by energy-dispersive x-ray spectroscopy (EDS) and a quantitative measurement by Auger electron spectroscopy (AES). The dentin pre-treatments investigated were: (1) 10% citric acid/3% ferric chloride, (2) 10% maleic acid, (3) 2.5% nitric acid, and (4) an alcoholic solution of HEMA with a phosphorus acid ester. These pre-treatments were applied to freshly extracted teeth that had been sectioned to expose the dentin and ground to simulate the smeared layer. After the appropriate pre-treatment was applied, a 10% (v/v) solution of HETMA in acetone was applied to the surface, followed by the corresponding adhesive resin, which was then polymerized. The samples were then processed for observation by scanning transmission electron microscopy (STEM), AES, and STEM/EDS analysis. The results indicated significant differences in the ability of HETMA to penetrate the dentin surface conditioned by the four pretreatments investigated here. This study also demonstrated that AES and STEM/EDS could be used in a correlative fashion to determine the distribution of HETMA within or adjacent to the treated dentin surface.

Dentin-Bonding Agents↗

Orientation of calvaria and periodontal ligament cells in vitro by pairs of demineralized dentine particles.

Rat calvaria cells (RC cells) and monkey periodontal ligament fibroblasts (MPL cells) were cultured for 4-6 days with demineralized dentine, acid-washed glass particles or untreated glass particles to determine whether the presence of these particles can affect the orientation of the cells. Encapsulation of dentine particles began as early as the first day in culture and occasional cells were attached to, and oriented between adjacent particles. Multilayers of cells formed along the periphery of the dentine particles and the more superficial of these cells projected outwards in a radial fashion. Oriented cell sheets were evident between dentine particles after 3 days in culture. Finally, the cell sheets tore away from the surface of the culture fish to give rise to thick multilayered cellular bridges between dentine particles. The nuclear orientation index (ratio of L/W) for each RC cell lying between 15 randomly selected pairs of each particle type in 4-day cultures was measured along 2 axes; the length represented by the shortest distance between the 2 particles and the width perpendicular to this axis. The nuclear orientation index was 1.52 for cells between dentine, 1.13 between acid-washed glass and 1.06 between untreated glass. Control measurements of cells associated with single particles were 1.06, 1.09 and 1.06 respectively. The frequency of cellular orientation occurring between dentine particles was significantly greater than that occurring between acid-washed glass particles (chi 2 > 0.001) which in turn was significantly greater than that for untreated glass particles (chi 2 > 0.001). The observations and results suggest that the development and maintenance of the observed cell orientation depends upon development and maintenance in the cell sheet of tensional forces oriented parallel to the axis between the dentine particles, and that this is related directly to the capacity of the cells to attach to the particles.

Animals↗

Dentin is dissolved by high concentrations of L-ascorbic acid 2-[3,4-dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-1-benzopyran-6-yl-hydrogen phosphate] potassium salt with or without hydrogen peroxide.

L-Ascorbic acid 2-[3,4-dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-1-benzopyran-6-yl-hydrogen phosphate] potassium salt (EPC-K(1)) is a conjugate of vitamin C and vitamin E that is water-soluble and stable at room temperature. EPC-K(1) has been developed as a hydroxyl radical (.OH) scavenger and antioxidant. In a previous tooth whitening experiment, it was accidentally found that tooth (dentin) blocks were dissolved by EPC-K(1) with H(2)O(2). In the current study, high concentrations of EPC-K(1) (2.5, 25 mM) with 3% H(2)O(2) dissolved and caused the collapse of dentin blocks. Similar concentrations of EPC-K(1) without 3% H(2)O(2), however, dissolved the dentin blocks without collapse over a 3-week period. In these cases, a.OH-like signal was detected using an ESR spin-trapping method. The volume of calcium in solution (including the dentin block) increased on the addition of EPC-K(1) in a concentration-dependent manner. In addition, the calcium : phosphorus ratio changed from 2 : 1 in sound dentin to 1 : 2 in the collapsed dentin block. High concentrations of EPC-K(1) are therefore considered to have calcium chelating and dentin dissolving activity. The dentin dissolving activity was enhanced when EPC-K(1) was used with H(2)O(2). EPC-K(1) had no protective effect when used in tooth whitening with H(2)O(2).

Ascorbic Acid↗

[Morphologic evaluation of the bonding between adhesive/composite resin and dentin irradiated with Er:YAG and Nd:YAG lasers: comparative study using scanning microscopy].

Since bonding systems were introduced in the restorative procedures carried out with esthetic materials, the treatment of dentin surfaces has been widely studied in order to establish the ideal technique. The application of 37% phosphoric acid on dentin is still the best known method. However, alternative methods for treating the dentin surface have been discussed in the literature, including the utilization of some kinds of laser irradiation. The purpose of this research was to morphologically evaluate the bond between adhesive materials and the dentin treated with Er:YAG and Nd:YAG lasers, in a comparative study by means of scanning electron microscopy (SEM). Irradiation either substituted acid etching, or was associated to it. Recently extracted bovine incisors were utilized. They received class V cavity preparations and were restored with a bonding system and a light-cured composite resin. Meanwhile, some of the teeth underwent irradiation with Er:YAG laser or Nd:YAG laser before the application of the bonding agent and the composite resin. The samples were selected, prepared for SEM and submitted to morphological analysis. Data were registered in photomicrographs. Based on the microscopic observations, we concluded that only in the dentin surfaces submitted to irradiation with Er:YAG laser and to acid conditioning there was penetration of resin into the dentine. With the Nd:YAG laser treatment, there was only visual superposition of resin over the dentin surface, which suggests that there was only occlusion of the tubules, with characteristics of fusion in the superficial dentine.

Animals↗

The effects of different tetracyclines on the dentin root surface of instrumented, periodontally involved human teeth: a comparative scanning electron microscope study.

This in vitro study compares, by scanning electron microscope (SEM) examination, the surface effects of various topical applications of tetracycline on the instrumented dentin root surface of human teeth. Eighty-two (82) dentin samples were prepared from periodontally-compromised teeth planned for extraction. Solutions of tetracycline HCl, doxycycline, minocycline, sumycin, and a saline control were prepared and applied to the dentin samples for 0.5, 1, 3, 5, and 10 minutes. Each solution pH was measured: tetracycline HCI (pH 1.6), doxycycline (pH 2.2), minocycline (pH 3.8), sumycin (pH 4.4), and saline (pH 5.1). A tetracycline periodontal fiber was also evaluated at 1, 4, 7, and 10 days of exposure for dentin surface effects. Tetracycline HCI removed the dentin smear layer leaving clean and open tubules significantly better than other solutions tested in as little as 30 seconds. Doxycycline and minocycline produced similar results to each other, which were significantly better than sumycin and saline, but not as effective as tetracycline HCl. Smear layer removal was attained by doxycycline and minocycline in five to ten minutes; however, sumycin and the saline control ineffectively removed the surface smear layer and dentinal tubules remained partially to totally occluded by debris. The periodontal fiber did not significantly alter the surface smear layer. Results of this study suggest that tetracycline HCl is the best current tetracycline form for root surface conditioning as measured by its ability to affect both dentin smear layer removal and dentin tubule exposure.

Administration, Topical↗

The distribution of intratubular dentine in equine incisors: a scanning electron microscopic study.

The distribution of intratubular (peritubular) dentine was studied by scanning electron microscopy in 12 equine incisor teeth. High levels of intratubular dentine were found in the peripheral regions of the dentine. In these areas, a marked asymmetry occurred, as intratubular dentine was predominantly deposited onto the side of the dentinal tubular walls nearest to the dentino-enamel junction. The quantity and asymmetry of intratubular dentine were reduced towards the centre of the tooth. The significance of these variations in the amount and distribution of intratubular dentine between the different dentinal regions is discussed.

Animals↗

The diameter and number of dentinal tubules in rat, cat, dog and monkey. A comparative scanning electron microscopic study.

The aim of the study was to investigate in commonly used experimental animals the pulpal wall and the dentin with special reference to the number and diameter of the dentinal tubules. The coronal dentin of a total of 26 permanent, intact teeth from rat, cat, dog and monkey was fractured experimentally. The calculations were based on the study of about 150 scanning electron microscope (SEM) photographs of fractured surfaces and of the pulp chamber wall. The number of dentinal tubules per unit area was calculated and the tubule diameter was measured at various distances from the pulp. The tubules were found to be widest at the pulpal wall, where the mean diameter ranged form 1.7 to 2.8 mum, the highest value being found in monkey and the lowest in the incisors of rat. In the middle part of the dentin the mean diameter varied from 1.0 to 1.3 mum and at the periphery it was 0.6 to 0.9 mum. The largest number of tubules per unit area was found immediately incisal of the pulp horn and the smallest number cervically, near the enamel. At the pulpal wall the mean number of the tubules ranged from 50,000 to 90,000/mm2, in the middle of the dentin it was between 37,000 and 50,000/mm2 and at the periphery it was between 10,000 and 25,000/mm2. In all species examined the dentinal tubules showed a straight course, except in incisors of rat, where local irregularities were seen. A comparison was also made between the species studied and homo with respect to the number and width of the dentinal tubules.

Animals↗

The effect of two sucrose diets on formation of dentin and predentin in growing rats.

The effect of two high-sucrose diets on dentinal caries, dentin formation, and the predentin width was studied in Sprague-Dawley rats. Rats were weaned at the age of 3 weeks and for 4 weeks fed a non-cariogenic commercial rat food (R36) for control, a high-sucrose Stephan-Harris (S-H) diet, or a new high-sucrose (sR36) diet in which most of the barley and wheat flour of the control R36 diet were replaced by sucrose. The areas of dentinal caries, the areas of dentin formation, and the width of predentin and dentin were quantified. Both high-sucrose diets induced dentinal caries, and both reduced dentin formation and increased the width of predentin compared with the control diet. Moreover, rats fed the S-H high-sucrose diet showed significantly greater progression of caries and reduction of dentin formation relative to rats fed the new high-sucrose diet, sR36. The high-sucrose diet thus was a substrate for caries-inducing microbes and a significant, but possibly not the exclusive, substrate for host modulation of odontoblast function.

Animals↗

Shear bond strength of tooth-colored indirect restorations bonded to mid-coronal and cervical dentin.

To investigate the bonding of tooth-colored indirect restorations to cervical dentin, shear bond strengths of bonded resin inlays to cervical dentin and mid-coronal dentin were investigated and compared. Indirectly fabricated composite inlays (Estenia) were cemented with a dual-cured resin cement (Panavia Fluoro Cement II) to either cervical or mid-coronal dentin. Resin cement was cured with or without light irradiation for 20 seconds. After 24-hour or one-week storage, the bonded inlays were subjected to a micro-shear bond test. The light-cure method showed significantly higher bond strengths to both dentin regions compared with the self-cure method. Further, significant improvement in bonding after one-week storage was found in the case of light-cure method rather than the self-cure method. Although the cervical dentin tended to show lower bond strength than mid-coronal dentin, significant difference between the two dentin regions was only found when the resin cement was light-cured and stored for only one day.

Analysis of Variance↗

A model for clinical evaluation of the effect of antimicrobial agents on carious dentin.

PURPOSE: To evaluate, longitudinally, the effect of a chlorhexidine varnish on the proteolytic activity of dentin caries in vivo. MATERIALS AND METHODS: 20 permanent molars and 8 primary molars with carious lesions in dentin were studied in subjects 18-35 yrs old (n=20), and 5-6 yrs old (n=8) respectively. These lesions were clinically evaluated according to texture and color. Carious dentin specimens were obtained by means of biopsies performed with a #4 carbide bur at the initial visit (TO) before application of a 10% chlorhexidine varnish and 2, 4, 8, and 12 wks thereafter. The dentin biopsies were immersed in Sorensen's buffer, vortexed for 30 s, and mixed with a 1.67 mM solution of n-benzoyl-DL-arginine-naphthylamide (BANA), a substrate for proteolytic enzymes. Samples were incubated overnight at 37 degrees C and color was developed with 0.1% fast garnet. The optical density (OD) of reaction mixtures was recorded photometrically. All teeth were grouped for analysis, as Mann-Whitney tests revealed no statistically significant differences between median values for OD for both age groups. ANOVA was used to compare progressive inhibition of proteolytic activity in dentin caries samples over time. RESULTS: The average proteolytic activity at the dentin substrates (OD) at TO and 2, 4, 8 and 12 wks thereafter were 0.794+/-0.089, 0.741+/-0.071, 0.676+/-0.087, 0.600+/-0.094, and 0.508+/-0.108 respectively. The chlorhexidine varnish mediated a significant inhibition of the proteolytic activity present in dentin caries after 12 wks (P<0.0001). At T0, 100% of the carious lesions examined were characterized as soft upon exploration. After 12 wks, 54% (15/28) of the lesions were partially hardened and 46% (13/28) hardened/nonprogressing. The dentin color was yellow/light brown in 100% of the lesions at baseline, and dark brown/black in 86% (24/28) after 12 wks. CLINICAL SIGNIFICANCE: This study demonstrated that chlorhexidine varnishes arrested active caries in vivo and inhibited the proteolytic activity present in these lesions. These findings strengthen the rationale for including chlorhexidine in the overall treatment strategy for patients with high caries activity.

Adolescent↗

Effect of self-etching primer vs phosphoric acid etchant on bonding to bur-prepared dentin.

This study evaluated the effect of dentin conditioner on tensile bond strength to dentin prepared with different types of burs. A self-etching primer system, Mac-Bond II (MB, Tokuyama Dental) and a phosphoric acid etching system, Single Bond (SB, 3M) were used for conditioning. Twenty-four extracted intact human molars were ground flat to expose occlusal dentin. After the dentin surfaces were polished with #600 SiC paper, the teeth were randomly divided into a control group and three experimental groups according to the bur grits used: #600 SiC paper only as the control, fine cut steel bur (SB600), crosscut steel bur (SB703) and regular grit diamond bur (DB) mounted in a dental handpiece utilizing water cooling. The dentin surfaces were treated with one of two adhesive systems, then composite buildups were done with Clearfil AP-X (Kuraray Medical). After soaking the bond specimens for 24 hours in 37 degrees C water, multiple vertical serial sections (0.7 mm thick, 7-8 slices per one tooth) were made, trimmed to form an hour-glass shape with a 1.0 mm2 cross-section and tensile bond strengths were determined at a crosshead speed of 1 mm/minute. Statistical analysis was made using one and two-way ANOVA and Fisher's PLSD test (p<0.05). Six additional molars were used for SEM observations of the dentin surfaces of each group before and after treatment with the self-etching primer of MB, and another four teeth were used to observe the resin-dentin interface of each group of SB. Using MB, the DB group produced the lowest tensile bond strength (TBS) among the groups that received bur preparation, and there were no statistical differences among SB600, SB703 and the control. For SB, the TBS of SB703 was the highest, and there were no statistical differences among the other groups and the control. The influence of the method used to prepare dentin for micro-tensile bond strength testing was dependent on the adhesive system used.

Acid Etching, Dental↗

[A SEM analysis of in vivo adhesive interface between a bonding agent and normal or sclerotic dentin].

AIM: Although dentine is a dynamic sub-stratum of the tooth, it seems correct to say that as far as etching and bonding to the sclerotic dentine is concerned, there are different micro-morphological aspects to be analysed in comparison to those on the healthy dentin. METHODS: This paper seeks to analysis the interface between the dentin and the adhesive bonding material resulting from in vivo placement of a 5(th) generation dentin bonding system on the base of cavities in 8 teeth. The teeth were removed for periodontal or orthodontic reasons and then examined by scanning electron microscopy. RESULTS: The results confirm the notable complexity of the dentin-adhesive interface that is developed or formed in-vivo and is due to the different state in which the dentine is found (healthy or sclerotic). CONCLUSION: It is underlined that the passage from the state of healthy to sclerotic dentin is very fast.

Bicuspid↗

Influence of eugenol contamination on the wetting of ground and etched dentin.

Forty third molars were sectioned parallel to the occlusal surface in order to expose superficial and deep dentin. Exposed surfaces were ground flat with 500-grit sandpaper. Contact angle measurements were performed to assess wettability using the ADSA-CD technique. Specimens were divided into two groups. Group 1 was the control group (no contamination). Group 2 served as the test group. Dentin surfaces were covered with a provisional eugenol-containing material (IRM) and were placed into a humidor at 37 degrees C for one week. The provisional material was removed. Wettability measurements of the two groups were made with water on ground dentin, with water and resin on etched dentin. Data were statistically analyzed by ANOVA, Student-Newman-Keuls multiple comparison and Student t-tests. Eugenol contamination did not affect the dentin wetting. Acid etching significantly diminished contact angle values. Dentin wetting was greater on deep dentin than on superficial dentin.

Acid Etching, Dental↗

Dentin extracellular matrix and dentinogenesis.

The formation of dentin involves secretion of matrix proteins by odontoblasts, prior to the deposition of apatite crystals. These matrix proteins probably play a role in transformation of predentin to dentin. The physical and chemical properties of dentin collagen, similar to those of bone, are especially adapted for binding matrix proteins and as a grid for mineral deposition. Phosphophoryns, polyanionic, and dentin-specific proteins are secreted at the mineralization front and are involved in some way in the mineralization process of circumpulpal dentin. Dentin sialoprotein is specifically made by odontoblasts and pulp cells and may be in the family of bone proteins known to promote cell attachment. Several proteins originally isolated from bone are also found in dentin and are expressed by odontoblasts. Although the mechanisms of dentinogenesis have not been elucidated, detailed studies of dentin matrix proteins should give valuable insights into this process.

Collagen↗

New device for selective dentin caries removal.

OBJECTIVES: To develop prototype rotary selective dentin caries excavators and to demonstrate their ability to remove only carious dentin in extracted teeth. METHOD AND MATERIALS: Milled polymer prototype and formed wire loop prototype burs were made. They were tested on normal dentin with standardized force application and compared to carbide burs for ability to cut by weighing three extracted teeth at pre- and postcutting for each prototype version. They were tested on carious dentin of three teeth for each prototype version. The resulting excavated surfaces were analyzed with dentin caries dye, the teeth were decalcified and examined histologically, and the used prototypes were examined in light and scanning electron microscopes. RESULTS: For both prototypes, noncarious teeth did not lose weight from prototype instrumentation, but each lost 9 or 10 mg after instrumentation with the control carbide bur. Both prototypes quickly removed carious dentin in each of the carious teeth until a definitive cutting endpoint was reached. The excavated surfaces from the milled polymer prototypes did not stain with caries dye, but those from the wire loop prototypes stained lightly in some areas. In the light microscope, all sections of excavated carious teeth were bacteria-free. Light and scanning electron microscope images of the prototypes revealed scratch patterns on the wire loop prototypes and deformation of blades on the polymer prototypes. CONCLUSION: Both prototypes removed carious dentin but did not remove normal dentin in the extracted teeth used in this study. Further development is indicated.

Dental Caries↗

Microtensile bond strength to root canal vs pulp chamber dentin: effect of bonding strategies.

PURPOSE: The aim of this in vitro study was to compare the microtensile bond strength (MTBS) between root canal and pulp chamber dentin with two bonding strategies (self-etching primer and total-etch technique). MATERIALS AND METHODS: The pulp chamber of four human canines was accessed and the pulp chamber and root canal prepared with spiral drills. The teeth were cut into halves parallel to the long axis of the tooth and randomly assigned to two groups: Clearfil SE Bond + AP-X(SE) (Kuraray) and SingleBond + Filtek Z250(SB) (3M ESPE). After 24 h in water storage, the specimens were cut perpendicular to the root into 1.0-mm slices with a low-speed diamond saw. Specimens were trimmed to obtain hourglass shapes with a bond area of 1.0 mm2 (n = 12). Three specimens were obtained from the cervical root canal dentin (R) and from the coronal pulp chamber dentin (C). The MTBS was measured in a Bencor device with an Instron machine at a crosshead speed of 0.5 mm/min. The data was analyzed with two-way ANOVA and Tukey LSD post hoc (p < 0.05). RESULTS: MTBS in MPa (mean +/- SD) were: SB.C = 25.3 (+/-6.5)a; SB.R = 16.9 (+/-6.0)b; SE.C = 16.9 (+/-3.4)b; SE.R = 16.8 (+/-5.3)b. Means with the same letter are not statistically different at p < 0.05. When data were pooled for "dentin region", coronal pulp chamber dentin resulted in statistically higher bond strengths than root canal dentin (p < 0.013). CONCLUSION: Bonding to pulp chamber dentin seems to be more predictable than to root canal dentin. In the former region, the total-etch technique may result in a higher bond strength.

Acid Etching, Dental↗

Bonding of self-etching and total-etch systems to Er:YAG laser-irradiated dentin. Tensile bond strength and scanning electron microscopy.

This study investigated the effect of Er:YAG laser on bonding to dentin and the interaction pattern of different adhesive systems with the lased substrate. Tensile bond strength of a self-etching [Clearfil SE Bond (CSEB)] and two total-etch [Single Bond (SB) and Gluma One Bond (GOB)] systems to lased and non-lased dentin was evaluated and the adhesive interface morphology was examined by SEM. Dentin was either treated following the manufacturers' instructions (A) or submitted to Er:YAG lasing (80 mJ; 2 Hz) + adhesive protocol (B). Resin cones were bonded to demarcated dentin sites and tested for tensile strength. For SEM, dentin discs were obtained, bisected and the halves were treated (A or B). The adhesive interfaces were examined. Means of tensile bond strength (in MPa) were: CSEB: (A) 20.65+/-1.81, (B) 14.06+/-1.88; SB: (A) 18.36+/-1.48, (B) 16.19+/-1.90; GOB: (A) 16.58+/-1.94, (B) 14.07+/-2.13. ANOVA and Tukey tests showed that lasing of dentin resulted in a significant decrease in bond strength (p<0.05). In the non-lased subgroups, CSEB had higher bond strength than the total-etch adhesives (p<0.05). Conversely, in laser-ablated specimens, CSEB had the lowest bond strength, while SB had the highest values (p<0.05). Consistent hybrid layers were observed for conventionally treated specimens, whereas either absent or scarce hybridization zones were viewed for lased subgroups. Er:YAG laser irradiation severely undermined the formation of consistent resin-dentin hybridization zones and yielded lower bond strengths. CSEB self-etching primer appeared to be the most affected by the laser ablation on the dentin substrate, resulting in the weakest adhesion.

Dental Bonding↗

[A study on acquired acid resistance of enamel and dentine irradiated by Er, Cr: YSGG laser in vitro].

OBJECTIVE: To evaluate the acid resistance of enamel and dentin irradiated by Er, Cr: YSGG laser to artificial caries formation in vitro. METHODS: Enamel and dentin samples were irradiated with Er, Cr: YSGG laser at 6 W or 4 W for 6 second, respectively. Every sample was immersed in 3 ml of lactic demineralization solution at pH 4.8 and incubated at 37 degrees C for 24 hours. The parts per million of calcium ion of each solution was measured by atomic absorption spectrophotometry, the quantities of calcium and phosphate on the surface of enamel and dentin sample were examined by SED-X and the ultrastructure was investigated by SEM. RESULTS: In the enamel and dentin samples, the dissolved Ca(2+) concentration in laser group were significantly decreased compared with that of the control group (P < 0.05). The quantities of Ca (weight%) in enamel and dentin were significantly higher in the laser group than in the control group (P < 0.05). The content of P was increased in dentin and enamel samples, but only the increase in enamel sample was significant (P < 0.05). In both samples, no significant changes on Ca/P weight ratio were found between the groups. The irradiated enamel and dentin surface lacked a smear layer and showed various patterns of microirregulation with a scaly appearance, the openings of dentinal tubules were clearly visible, but no melting or carbonization was observed. CONCLUSION: Er, Cr: YSGG laser irradiation is effective for increasing acid resistance of dental hard tissue and does not cause thermal side effect.

Calcium↗