SEARCH · PubMed Health

Results for “Solubility”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources

PubMed2006

Hansen solubility parameters for polyethylene glycols by inverse gas chromatography.

Inverse gas chromatography (IGC) has been applied to determine solubility parameter and its components for nonionic surfactants--polyethylene glycols (PEG) of different molecular weight. Flory-Huggins interaction parameter (chi) and solubility parameter (delta(2)) were calculated according to DiPaola-Baranyi and Guillet method from experimentally collected retention data for the series of carefully selected test solutes. The Hansen's three-dimensional solubility parameters concept was applied to determine components (delta(d), delta(p), delta(h)) of corrected solubility parameter (delta(T)). The molecular weight and temperature of measurement influence the solubility parameter data, estimated from the slope, intercept and total solubility parameter. The solubility parameters calculated from the intercept are lower than those calculated from the slope. Temperature and structural dependences of the entopic factor (chi(S)) are presented and discussed.

Chromatography, Gas↗

PubMed2006

Effects of soluble fiber on matrix metalloproteinase-2 activity and healing of colon anastomosis in rats given radiotherapy.

BACKGROUND AND AIMS: Soluble fiber is fermented by colonic microflora yielding short-chain fatty acids (SCFAs) in the colon. We aimed to investigate the effect of oral administration of soluble fiber on healing of anastomosis and matrix metalloproteinase-2 activity in radiotherapy received colonic anastomosis. METHOD: Eighty-four Wistar rats were divided into six groups. All rats were performed a left colonic resection with end-to-end anastomosis. Group I received rat cow. Group II received soluble fiber orally for five consecutive days preoperatively as well as 3rd and 6th days postoperatively. Group III received SCFAs via rectum for five consecutive days preoperatively. Group IV received irradiation to the pelvis at a total dose of 24 Gy on the 10th and 5th days before the operation. Group V was exposed to irradiation like the rats in Group IV and oral treatment like the rats in Group II. Group VI received irradiation like the rats in Group IV and transrectal treatment like the rats in Group III. On the 3rd and 7th postoperative days, all the rats were anesthetized to evaluate the anastomosis healing clinically, histologically and biochemically. RESULTS: Third and 7th day bursting pressures of the rats that were fed with a normal diet and exposed to radiotherapy were significantly decreased (P<0.001). Bursting pressures of Groups V and VI on the 7th day were significantly higher than the control group's bursting pressures (P<0.05). Hydroxyproline levels of Group IV were significantly decreased (P<0.001). Following oral soluble fiber and transrectal administration of SCFAs, these low levels reached to the levels of control radiotherapy group. Matrix metalloproteinase-2 activity of all the rats that were exposed to radiotherapy was higher than the control group (P<0.001). Matrix metalloproteinase-2 enzyme levels in the Groups V and VI were lower than the ones in the Group IV (P<0.001). The histologic parameters of anastomotic healing such as epithelial regeneration, exudate, necrosis, and fibroblast levels were significantly improved by the use of oral soluble fiber and transrectal SCFAs treatment. CONCLUSION: Undesirable effects of preoperative radiotherapy on mechanical, histological and biochemical parameters can be overcome by oral soluble fiber. Oral soluble fiber administration has similar positive effects like the transrectal administration of the SCFA's.

Anastomosis, Surgical↗

PubMed2006

Biological assay challenges from compound solubility: strategies for bioassay optimization.

Compound solubility in buffers and dimethyl sulfoxide (DMSO) has emerged as an important issue. Many discovery compounds have low solubility but are potentially valuable as leads. Unfortunately, low solubility affects bioassays by causing underestimated activity, reduced HTS-hit rates, variable data, inaccurate SAR, discrepancies between enzyme and cell assays and inaccurate in vitro ADME-Tox testing. Strategies for optimizing bioassays include: considering solubility in HTS-library design; early screening for solubility; improving storage and handling of DMSO stocks; optimizing dilution protocols; and ensuring that low-solubility compounds are fully solubilized in bioassays. These approaches allow for adequate assessments of valuable pharmacophores for which solubility can be chemically optimized at a later date.

Biological Assay↗

PubMed2005

Solubility of nicotinic acid in polyamidoamine dendrimer solutions.

In the present study we investigated the effect of ethylenediamine (EDA) core polyamidoamine (PAMAM) dendrimers on the aqueous solubility of nicotinic acid. The aqueous solubility of nicotinic acid was measured in the presence of dendrimers at room temperature in distilled water. The effect of variables, such as pH condition, concentration, surface functional group and generation (molecule size) of dendrimer, has been investigated. Results showed that the solubility of nicotinic acid in the dendrimer solutions was proportional to dendrimer concentration, both amine and ester-terminated dendrimers caused the higher increase in nicotinic acid solubility at higher pH conditions. The order in which the dendrimers increased the solubility at a constant pH condition was G4>G3>G2>G1. In addition, at each pH, the solubility of nicotinic acid was greater in the presence of amine-terminated dendrimers compared to the amine ester-terminated dendrimers possessing the same number of surface functional groups. Under suitable conditions PAMAM dendrimers can be highly effective used to enhance the solubility of nicotinic acid.

Dendrimers↗

PubMed2004

Kinetics of degradation and oil solubility of ester prodrugs of a model dipeptide (Gly-Phe).

Oil-based depot formulations may constitute a future delivery method for small peptides. Thus, a requirement is attainment of sufficient oil solubility for such active compounds. A model dipeptide (Gly-Phe) has been converted into lipophilic prodrugs by esterification at the C-terminal carboxylic acid group. The decomposition kinetics of octyl ester of Gly-Phe (IV) has been investigated at pH 7.4 (37 degrees C) and IV was shown to degrade by first-order kinetics via two parallel pathways (1) intramolecular aminolysis resulting in formation of a 2,5-diketopiperazine and (2) hydrolysis of the ester bond producing the dipeptide. The cyclisation reaction was dominating in the decomposition of methyl (II) butyl (III) octyl (IV) decyl (V) and dodecyl (VI) esters of Gly-Phe at pH 7.4. However, this degradation pathway was almost negligible for pH below 6. During degradation of the dipeptide esters in 80% human plasma pH 7.4 (37 degrees C) a minimal amount of cyclo(-Gly-Phe) was formed. A faster degradation of the esters in 80% human plasma pH 7.4 compared to those in aqueous solution pH 7.4 was suggested to be due to fast cleavage of the peptide bond. Low oil solubilities for Gly-Phe and the hydrochlorides of the dipeptide esters III and VI were observed. Although the solubility of Gly-Phe in oil solutions was enhanced by hydrophobic ion pairing with sodium decyl sulfonate the oil solubility was still less than 1 mg Gly-Phe/ml. By addition of a solubiliser, 10% N,N-dimethylacetamide (DMA), to Viscoleo the solubility of the HIP complexes increased significantly. The present study indicates that sufficient oil solubility might only be obtained for relatively small peptides by using the prodrug approach in combination with solubility enhancing organic solvents like DMA.

Dipeptides↗

PubMed2006

Contribution of solid-state properties to the aqueous solubility of drugs.

This study investigates the influence of the solid-state properties melting point (T(m)), enthalpy of melting (DeltaH(m)) and entropy of melting (DeltaS(m)) of a drug on its intrinsic solubility (S(0)). For this purpose, 26 chemically and structurally diverse drugs covering the oral drug space were selected and the S(0), T(m), DeltaH(m) and DeltaS(m) were determined experimentally. The influence of T(m), DeltaH(m) and DeltaS(m) on S(0) was studied using regression analysis. The overall improvement of the predictions were 0.3 log units, however, five compounds (astemizole, glyburide, fenbufen, gliclazide and griseofulvin) were improved by more than one log unit. T(m) and DeltaH(m) had a larger effect than DeltaS(m) on the solubility predictions. The well-known general solubility equation (GSE) and the Dannenfelser semi-empirical equation for the calculation of DeltaS(m) were evaluated using our data set. While predictions of drug solubility obtained using the GSE were acceptable, the use of the experimental DeltaS(m) values instead of the constant 56.5 J mol(-1)K(-1) improved the accuracy of the prediction. The Dannenfelser equation underestimated the DeltaS(m) for most compounds with on average 15 J mol(-1)K(-1). Our results show that solid-state properties should be considered for improved performance of future models for prediction of drug solubility. In addition our study provides accurate experimental data on intrinsic solubility for 26 compounds, supplying a useful external data set for validation of drug solubility models.

Entropy↗

PubMed2004

Effects of incubation on solubility and mobility of trace metals in two contaminated soils.

Much research has focused on changes in solubility and mobility of trace metals in soils under incubation. In this experiment, changes in solubility and mobility of trace metals (Pb, Cu and As) and Fe in two contaminated soils from Tampa, Florida and Montreal, Canada were examined. Soils of 30 g were packed in columns and were incubated for 3-80 days under water-flooding incubation. Following incubation, metal concentrations in pore water (water soluble) and in 0.01 M CaCl2 leachates (exchangeable+water soluble) were determined. While both soils were contaminated with Pb (1600-2500 mg kg(-1)), Tampa soil was also contaminated with As (230 mg kg(-1)). Contrast to the low pH (3.8) of Tampa soil, Montreal soil had an alkaline pH of 7.7 and high Ca of 1.6%. Concentrations of Fe(II) increased with incubation time in the Tampa soil mainly due to reductive Fe dissolution, but decreased in the Montreal soil possibly due to formation of FeCO3. The inverse relationship between concentrations of Pb and Fe(II) in pore water coupled with the fact that Fe(II) concentrations were much greater than those of Pb in pore water may suggest the importance of Fe(II) in controlling Pb solubility in soils. However, changes in concentrations of Fe(II), Pb, Cu and As in pore water with incubation time were similar to those in leachate, i.e. water soluble metals were positively related to exchangeable metals in the two contaminated soils. This research suggests the importance of Fe in controlling metal solubility and mobility in soils under water-flooded incubation.

Arsenic↗

PubMed2003

Solubility of drugs in aqueous solutions. Part 3: multicomponent mixed solvent.

The results obtained previously by Ruckenstein and Shulgin [Int. J. Pharm. 258 (2003a) 193; Int. J. Pharm. 260 (2003b) 283] via the fluctuation theory of solutions regarding the solubility of drugs in binary aqueous mixed solvents were extended in the present paper to multicomponent aqueous solvents. The multicomponent mixed solvent was considered to behave as an ideal solution and the solubility of the drug was assumed small enough to satisfy the infinite dilution approximation. An expression derived for the activity coefficient of a solid solute in a multicomponent solvent was used to obtain an equation for the solubility of a drug in terms of its solubilities in two subsystems of the multicomponent solvent and their molar volumes. Ultimately the solubility can be expressed in terms of those in binary or even in individual solvents and their molar volumes. The method was applied to the solubility of tioconazole and 19-Nor-1alpha,25-dihydrovitamin D(2) in several ternary and in a quaternary aqueous mixed solvents. The predicted solubilities were compared with experimental data and good agreement was found.

Algorithms↗

PubMed2004

Partial solubility parameters of poly(D,L-lactide-co-glycolide).

During production of microparticles by the polymer incompatibility method a polymer solution is demixed. Therefore, investigations into solubility are often carried out when the suitability of a polymer is examined. Solubility parameters can be used to quantify the solubility. For polylactide and polyglycolide as commonly employed copolymers for microparticles the solubility parameters have rarely been documented. This study aimed to determine solubility parameters and partial solubility parameters for different proportions of lactide to glycolide for poly(D,L-lactide-co-glycolide) (PLGA). The employed methods were compared and solubility maps established. Finally the accuracy of the results was discussed for different polymer batches which were used for production of microparticles. Although the turbidity titration method was found to be the most precise, it was not possible to sufficiently explain the differences between three polymer batches during microparticle production.

Chemistry, Pharmaceutical↗

PubMed2005

Inverse gas chromatographic determination of solubility parameters of excipients.

The principle aim of this work was an application of inverse gas chromatography (IGC) for the estimation of solubility parameter for pharmaceutical excipients. The retention data of number of test solutes were used to calculate Flory-Huggins interaction parameter (chi1,2infinity) and than solubility parameter (delta2), corrected solubility parameter (deltaT) and its components (deltad, deltap, deltah) by using different procedures. The influence of different values of test solutes solubility parameter (delta1) over calculated values was estimated. The solubility parameter values obtained for all excipients from the slope, from Guillet and co-workers' procedure are higher than that obtained from components according Voelkel and Janas procedure. It was found that solubility parameter's value of the test solutes influences, but not significantly, values of solubility parameter of excipients.

Chromatography, Gas↗

PubMed2004

Automated robotic liquid handling/laser-based nephelometry system for high throughput measurement of kinetic aqueous solubility.

The ability to rapidly and consistently measure aqueous solubility in a preclinical environment is critical to the successful identification of promising discovery compounds. The advantage of an early solubility screen is timely attrition of compounds likely to fail due to poor absorption or low bioavailability before more costly screens are performed. However, due to the large number of compounds and limited sample amounts, thermodynamic solubility measurements are not feasible at this stage. A kinetic solubility measurement is an alternative to thermodynamic measurements at the discovery stage that provides a rank listing of solubility values with minimal sample requirements. A kinetic solubility measurement is attractive from an automation vantage because it features rapid data acquisition and is amenable to multi-well formats. We describe the use of a robotic liquid/plate handler coupled to nephelometry detection for the measurement of kinetic solubility. We highlight the liquid handling validation, serial dilution parameters, and a comparison to the previous method. Experiments to further enhance throughput, or increase confidence in the automation steps, are described and the effects of these experiments are presented. In our integrated nephelometry method, we observe rapid liquid handling with an error of less than 10%, after a series of validation studies, and a sample throughput up to 1800 compounds per week. We compare the nephelometry method with our semi-thermodynamic flow-injection analysis (FIA) method, and find a 75% bin agreement between the methods.

Kinetics↗

PubMed2006

The clastogenic effects of chronic exposure to particulate and soluble Cr(VI) in human lung cells.

Hexavalent chromium (Cr(VI)) is a well-designated human lung carcinogen, with solubility playing an important role in its carcinogenic potential. Although it is known that particulate or water-insoluble Cr(VI) compounds are more potent than the soluble species of this metal, the mechanisms of action are not fully elucidated. In this study, we investigated the hypothesis that the difference in potency between particulate and soluble Cr(VI) is due to more chronic exposures with particulate chromate because it can deposit and persist in the lungs while soluble chromate is rapidly cleared. Chronic exposure to both insoluble lead chromate and soluble sodium chromate induced a concentration and time-dependent increase in intracellular Cr ion concentrations in cultured human lung fibroblasts. Intracellular Pb levels after chronic exposure to lead chromate increased in a concentration-dependent manner but did not increase with longer exposure times up to 72 h. We also investigated the effects of chronic exposure to Cr(VI) on clastogenicity and found that chronic exposure to lead chromate induces persistent or increasing chromosome damage. Specifically, exposure to 0.5 microg/cm(2) lead chromate for 24, 48 and 72 h induced 23, 23 and 27% damaged metaphases, respectively. Contrary to lead chromate, the amount of chromosome damage after chronic exposure to sodium chromate decreased with time. For example, cells exposed to 1 microM sodium chromate for 24, 48 and 72 h induced 23, 13 and 17% damaged metaphases, respectively. Our data suggest a possible mechanism for the observed potency difference between soluble and insoluble Cr(VI) compounds is that chronic exposure to particulate Cr(VI) induces persistent chromosome damage and chromosome instability while chromosome damage is repaired with chronic exposure to soluble Cr(VI).

Carcinogens, Environmental↗

PubMed2005

Soluble adhesion molecules in acute disseminated encephalomyelitis.

Soluble adhesion molecules are overexpressed in neuroinflammatory disorders. Their synthesis parallels that of their membrane-bound counterparts, which modulate lymphocyte transmigration through the blood-brain barrier. Blood-brain barrier cellular migration may be essential in the evolution of postinfectious inflammatory central nervous system disease. The serum levels of soluble intercellular adhesion molecule-1, soluble vascular adhesion molecule-1, and soluble E-selectin were measured in 12 children with acute disseminated encephalomyelitis and in two control groups (35 healthy and 35 affected by noninflammatory neurologic diseases) of similar age. In patients with acute disseminated encephalomyelitis, soluble E-selectin serum levels were significantly higher (median 113 ng/mL, range 54-144) than in both control groups (median 44, range 31-63, and median 58, range 43-89, respectively; one-way analysis of variance, P < 0.0001); a statistical trend for higher levels of soluble intercellular adhesion molecule-1 was observed in acute disseminated encephalomyelitis subjects, whereas soluble vascular adhesion molecule-1 titers did not differ between the three groups. The specific role played by each of these molecules in lymphocyte extravasation and the differential cytokine modulation of their expression might explain the result. Further larger studies are required including serial measurements and cerebrospinal fluid analysis.

Adolescent↗

PubMed2005

The influence of water-soluble As(III) and As(V) on dehydrogenase activity in soils affected by mine tailings.

Dehydrogenase activity (DHA) in soils contaminated by arsenic-bearing tailings was correlated with total arsenic and total water-soluble arsenic (As(III)+As(V)) to evaluate the impact of tailings dispersion on the oxidative capacity of soil microorganisms. Georeferenced surface soil samples (0-10 cm depth) were collected at different distances from a tailings dam. In the samples farthest from the dam, all water-soluble arsenic (avg. 0.6+/-0.1 mg kg(-1)) was As(V). The highest concentration of water-soluble As(III)+As(V) (>1.9 mg kg(-1)) was found where As(III) was present. DHA averaged 438.9+/-79.3 microg INTF g(-1) h(-1) at the greatest distance from the dam and decreased to 92.3+/-27.1 microg INTF g(-1) h(-1) with decreasing distance from the dam. Pearson correlation coefficient between DHA and samples containing water-soluble As(V) (r=-0.87) was greater than that between DHA and total water-soluble arsenic (r=-0.57). The correlation between DHA and soluble arsenic containing both As(V) and As(III) was not significant (r=0.24). In soils with detectable As(III) concentrations where wet conditions prevail (i.e., reducing conditions), there is an abiotic response in addition to a biotic one. The correlation between DHA and total water-soluble As(III)+ As(V) was higher (r=-0.79) when the abiotic response was excluded. Our study demonstrated the importance of distinguishing between total and available fraction and its species and the need to evaluate biological functions in addition to purely geochemical analyses. DHA bioassay combined with other microbial properties offers a good tool for evaluating soil microbial activity and status and is a suitable indicator of the oxidative capacity of soil microorganisms affected by tailings in an oxidizing environment; however, under reducing conditions, abiotic responses must also be studied.

Arsenic↗

PubMed2004

The basement membrane protein laminin-5 acts as a soluble cell motility factor.

One of the basement membrane (BM) proteins, laminin-5 (LN5), is known to support efficient cell adhesion and migration through interaction with integrins on the basal plasma membrane. Here, we show that a soluble form of LN5 induced migration of human epithelial cells and carcinoma cells by interacting with integrins on the apical cell surface. Although both LN5 and laminin-10/11 (LN10/11) promoted cell migration when coated onto a plastic surface as insoluble substrata, only LN5 stimulated cell migration in its soluble form on other substrata such as fibronectin (FN), vitronectin (VN) and collagen. Soluble LN5 interacted with integrins alpha3beta1 and alpha6beta1 on the apical cell surface and stimulated cell migration, while the cell morphology was largely dependent on the underlying substratum. Thus, integrin signals from the apical surface and the basal surface synergistically regulated cytoskeletal organization and cell motility. Soluble and insoluble LN5 induced cell motility by activating signal pathways via protein kinase C (PKC), phosphoinositide 3-OH kinase (PI3-K) and MAP kinase. The PKC dependency was more prominent for soluble LN5 than insoluble LN5, and was absent in the stimulation by insoluble LN10/11. In vitro scratch assays with keratinocytes, self-produced soluble LN5 bound to the apical cell surface of migrating cells at the scratched edges, suggesting that soluble LN5 may contribute to cell migration in pathological conditions such as wound healing and tumor invasion.

Animals↗

PubMed1998

Membrane-bound and soluble polyphosphatases of mitochondria of Saccharomyces cerevisiae: identification and comparative characterization.

Isolated mitochondria of Saccharomyces cerevisiae possess polyphosphatases insensitive to a number of inhibitors of ATPase and pyrophosphatase of the same organelles and differing from the last two by neutral pH optima and molecular masses. After subfractionation of mitochondria, the polyphosphatase activity is distributed among the membrane and soluble preparations. The membrane-bound and soluble polyphosphatase activities are represented by different enzymes distinguished by molecular masses, substrate specificity, Km values, and relation to mono- and divalent cations. The membrane-bound polyphosphatases have molecular masses of 120 and 76 kDa, and the soluble one of about 36 kDa. All three enzymes appear to have a monomeric structure. The soluble polyphosphatase activity is stimulated by divalent cations in contrast to the membrane-bound one which is inhibited by the same cations, including Mg2+. Monovalent cations do not actually change the activity of the soluble enzyme, but stimulate it in the membrane preparation. Specific activities for the hydrolysis of polyphosphates with average chain lengths of 9-188 phosphate residues increase under increasing degree of substrate polymerization in the membrane preparation and are actually unchanged in the soluble one. The affinity of the soluble enzyme to polyphosphates is 5-10 times higher than that of the membrane-bound polyphosphatases.

Acid Anhydride Hydrolases↗

PubMed2000

Contribution of the renin-angiotensin system to subsensitivity of soluble guanylyl cyclase in TGR(mREN2)27 rats.

Soluble guanylyl cyclase activity and its stimulation by diethylamineNONOate was measured in aortae from hypertensive TGR(mREN2)27 rats (TGR) and Sprague-Dawley controls. Superoxide dismutase was added in vitro to evaluate the contribution of oxidative breakdown of nitric oxide (NO) by superoxide anions. Expression of soluble guanylyl cyclase was assessed by reverse transcriptase-polymerase chain reaction (RT-PCR). Basal and stimulated soluble guanylyl cyclase activity was significantly reduced in TGR rats, addition of superoxide dismutase had no effect. Expression of soluble guanylyl cyclase subunits was not different between strains. The independent contribution of hypertension and the overactive renin-angiotensin system to soluble guanylyl cyclase subsensitivity was assessed after normalization of TGR's blood pressure by the Ca(2+)-channel blocker amlodipine or the angiotensin converting enzyme-inhibitor enalapril. Soluble guanylyl cyclase activity in TGR was slightly increased by amlodipine and almost completely restored by enalapril. In conclusion, TGR showed desensitized vascular soluble guanylyl cyclase, depending on their overactive renin-angiotensin system.

Aging↗

PubMed2002

Prediction of benzodiazepines solubility using different cosolvency models.

The solubility of four benzodiazepines (BZPs) including diazepam (DIZ), lorazepam (LRZ) clonazepam (CLZ), and chlordiazepoxide (CHZ) in water-cosolvent (ethanol propylene glycol and polyethylene glycol 200) binary systems were studied. In general, increasing the volume fraction of cosolvents resulted in an increase in the solubility of benzodiazepines. The mole fraction solubilities were fitted to the various cosolvency models, namely extended Hildebrand approach (EHA), excess free energy (EFE), combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K), general single model (GSM), mixture response surface (MR-S). double log-log (DL-L), and linear double log-log (LDL-L). The results showed that DL-L model was the best model in predicting the solubility of all drugs in all the water-cosolvent mixtures (OAE% = 4.71). The minimum and maximum errors were observed for benzodiazepine's solubility in water-propylene glycol and water-ethanol mixtures which were 2.67 and 11.78%, respectively. Three models (EFE, CNIBS/R-K and LDL-L) were chosen as general models for solubility descriptions of these structurally similar drugs in each of the solvent systems. Among these models, the EFE model was the best in predicting the solubility of benzodiazepines in binary solvent mixtures (OAE% = 11.19).

Anti-Anxiety Agents↗