PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Contamination”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56Linked to original sources

An in vitro study on restoring bond strength of a GIC to saliva contaminated enamel under unrinse condition.

OBJECTIVES: This study attempted to find a method of restoring the tensile bond strength of glass ionomer cement (GIC) to saliva contaminated enamel under unrinse condition. METHODS: One hundred and thirty human non-carious permanent teeth were divided into two major groups. Either treatment with air drying, acetone, polyacrylic acid, maleic acid, tartaric acid, Scotchbond primer or no treatment at all was applied to both clean and saliva contaminated enamel surfaces prior to GIC placement. Samples were debonded in tension after 7 days of storage in water using a universal testing machine. Statistical analysis was performed using one-way ANOVA, Tukey's studentized range test and Wilcoxon's rank sums test to determine the significance of the difference of tensile bond strengths within and between the two major groups. RESULTS: Bond strength of GIC to clean enamel was 2.46+/-0.79 MPa while the bond strength of GIC to wet contaminated enamel was significantly reduced to 1.28+/-0.32 MPa (p<0.01). However, the bond strengths were restored when the contaminated enamel surfaces were air-dried (2.19+/-0.38 MPa) or applied with either maleic acid (2.80+/-0.63 MPa) or Scotchbond primer (2.13+/-0.65 MPa) before placing GIC over the enamels. CONCLUSIONS: Air drying, or application of maleic acid or Scotchbond primer to the contaminated enamel without rinsing prior to GIC placement can restore the tensile bond strength to a level similar to that of non-contaminated control.

Acetone↗

Effect of groundwater flow on remediation of dissolved-phase VOC contamination using air sparging.

This paper presents two-dimensional laboratory experiments performed to study how groundwater flow may affect the injected air zone of influence and remedial performance, and how injected air may alter subsurface groundwater flow and contaminant migration during in situ air sparging. Tests were performed by subjecting uniform sand profiles contaminated with dissolved-phase benzene to a hydraulic gradient and two different air flow rates. The results of the tests were compared to a test subjected to a similar air flow rate but a static groundwater condition. The test results revealed that the size and shape of the zone of influence were negligibly affected by groundwater flow, and as a result, similar rates of contaminant removal were realized within the zone of influence with and without groundwater flow. The air flow, however, reduced the hydraulic conductivity within the zone of influence, reducing groundwater flow and subsequent downgradient contaminant migration. The use of a higher air flow rate further reduced the hydraulic conductivity and decreased groundwater flow and contaminant migration. Overall, this study demonstrated that air sparging may be effectively implemented to intercept and treat a migrating contaminant plume.

Air↗

Contamination and the quantitative exploitation of EELS low-loss experiments.

Quantitative exploitation of the low-loss domain of electron energy loss spectra is based on an accurate determination of the corresponding signal intensity profile. This signal can be erroneous and contains artefacts as a result of sample contamination in the microscope, for example. The consequences of contamination on the signal intensity of the low-loss spectra are discussed. In the case of a carbonaceous contamination, a simple additional spurious signal can be considered, as has been demonstrated in the case of a Si single crystal, a highly oriented pyrolytic graphite (HOPG) and a strontium titanate single crystal (SrTiO3). The linear variation of the rate of contamination with time allows the implementation of a simple method based on the subtraction of the spurious signal in order to correct for the contamination effect. The relative errors induced by the carbonaceous contamination on the determination of the optical properties of SrTiO3 are estimated.

Journal Article↗

Contaminant-induced immunosuppression and mass mortalities among harbor seals.

Virus-associated mass mortalities among seals inhabiting northwestern Europe have generated an interest in immunotoxicology in this species. A morbillivirus has been isolated from victims, but a contribution of immunotoxic contaminants to the severity of the outbreaks could not be ruled out. Fish-eating seals occupy high trophic levels in the aquatic food chain, and accumulate high levels of contaminants including polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), and polychlorinated dibenzofurans (PCDFs). Such chemicals have been found to be immunotoxic at low doses in studies of laboratory animals. We carried out an immunotoxicological study, in which captive harbor seals (Phoca vitulina) were fed herring from either relatively uncontaminated sites of the Atlantic Ocean, or from the highly contaminated Baltic Sea. In this report we summarize the contaminant-related immunosuppression observed in the captive group of seals fed herring from the Baltic Sea. In addition, we describe two parallel studies, in which laboratory rats are exposed as adults or perinatally to the contaminants in the Baltic Sea herring, exhibiting immunotoxicity. On the basis of these studies we conclude that complex mixtures of environmental contaminants including PCBs, PCDFs, and PCDDs may represent a real immunotoxic risk to free-ranging seals.

Animals↗

Hair testing for drugs of abuse: evaluation of external cocaine contamination and risk of false positives.

In some laboratories hair testing may be the main method for the evaluation of individual's drug history, however, compelling evidence supports the possibility that the presence of a small amount of drug in hair can derive from external contamination. The aim of the present study is to verify if a single external contamination with a small amount of cocaine will last sufficiently long to make a contaminated subject indistinguishable from active users, and if normal washing practices together with the decontamination procedures are sufficient to completely remove the external contamination. The results obtained using the decontamination methods suggested in literature demonstrate that significant concentrations of cocaine (>1 ng/mg) and moderate quantities of benzoylecgonine (generally <0.5 ng/mg) are still detectable up to 10 weeks after contamination. These results question the reliability of hair testing. In fact, even using the most sophisticated decontamination procedures it is not possible to distinguish a drug-contaminated subject from an active user. Thus, while a negative result excludes both chronic use and "contact" with drugs, a positive result cannot and must not be interpreted as a sure sign of drug addiction, but should be further confirmed by urine analysis.

Cocaine↗

Anterior chamber contamination during cataract surgery with intraocular lens implantation.

PURPOSE: To measure anterior chamber bacterial and fungal contamination at the beginning and end of cataract surgery with intraocular lens (IOL) implantation in a large series of patients and to determine the influence of preoperative treatment and operative technique on contamination. SETTING: Department of Ophthalmology, County Hospital of Salzburg, Austria. METHODS: This prospective study comprised 700 consecutive patients having planned cataract extraction (511 phacoemulsification, 189 extracapsular cataract extraction [ECCE]). Thirty-four patients required an anterior vitrectomy; 8 myopic patients did not receive an IOL. A preoperative smear and two intraoperative (at the beginning and end of surgery) anterior chamber aspirates were obtained from each patient. Postoperative smears were obtained at discharge. Three preoperative treatments were evaluated: no lacrimal system irrigation, no topical antibiotic (n = 282); lacrimal system irrigation with balanced saline solution, no topical antibiotic (n = 243); lacrimal system irrigation, antibiotic (neomycin) eyedrops (n = 175). All patients received topical indomethacin twice a day preoperatively. RESULTS: Preoperative conjunctival smears showed bacterial growth in 76.6% of eyes, with coagulase-negative staphylococci (75%) the most common bacteria. Anterior chamber aspirates were culture positive in 14.1% at the beginning and in 13.7% at the end of surgery, with coagulase-negative staphylococci and corynebacteria the most common. Contamination rates of conjunctival smears taken at discharge were significantly lower (35%) than those taken preoperatively. There was no statistically significantly higher risk of anterior chamber contamination in eyes having ECCE than in those having phacoemulsification. Preoperative treatment did not statistically significantly influence intraoperative aqueous humor contamination rates. There were no cases of acute postoperative endophthalmitis. CONCLUSION: Bacteria entered the anterior chamber during cataract extraction and remained there at the end of surgery in a significant percentage of patients. Surgical technique, preoperative antibiotics, and preoperative lacrimal system irrigation had no statistically significant effect on contamination.

Adolescent↗

Study of colonization resistance for Enterobacteriaceae in man by experimental contamination and biotyping as well as the possible role of antibodies in the clearance of these bacteria from the intestines.

The colonization resistance (CR) of the digestive tract was determined in 10 healthy volunteers by oral contamination with a neomycin resistant Escherichia coli (NR-E. coli) strain and measurement of the faecal concentration of this strain during 14 days after the contamination. This 'gold standard' was compared with another parameter of CR; the determination of the mean number of different biotypes of Enterobacteriaceae isolated from four faecal samples per volunteer. Both measures are significantly correlated (P less than 0.01). The NR-E. coli strain could be cultured from faecal samples of 4/10 volunteers as long as 300 days after contamination. Serum antibody titres against endogenous E. coli strains and the NR-E. coli strain used for experimental oral contamination were measured by an indirect immunofluorescence (IIF) assay. The assay was read by a video camera connected to an image processing system. The 95% confidence limits of antibody titres (log2) against endogenous E. coli strains ranged between less than 3 and 7.1 for IgA, between less than 3 and 8.7 for IgG and between less than 3 and 7.4 for IgM. Antibody titres against the NR-E. coli4 strain were within this (normal) range. The serum antibody titres against the NR-E. coli strain increased slowly after oral contamination, especially IgG and IgM. Little increase in IgA titres could be observed. An increase of serum antibody titres did not correlate with the elimination of the oral contaminant from the intestines. Therefore, we conclude that the CR is not IgG nor IgM antibody mediated.

Adult↗

The contamination of paté by Listeria monocytogenes in England and Wales in 1989 and 1990.

In July 1989, 1834 samples of paté (of which 1698 were from retail displays) were examined by the PHLS for the presence of Listeria monocytogenes. The survey was repeated in July 1990, when 626 paté samples on retail sale were examined. Between the two surveys there was a marked reduction in the proportions of patés contaminated (10% in 1989 and 4% in 1990) and in the numbers of samples from which > 10(3) L. monocytogenes/g were recovered. The higher rate of contamination detected in 1989 was largely due to paté from a single manufacturer. In both surveys, paté sold as loose slices had higher rates of contamination than those prepackaged. Temperature control had improved between the two surveys where 65% of samples in 1989 and 83% in 1990 were stored at < or = 7 degrees C. Although contamination occurred at almost all temperatures, L. monocytogenes was both quantitatively and qualitatively more common in samples stored at > 7 degrees C. The majority of patés had unexpired shelf lives of between 0 and 3 weeks. Although contamination occurred throughout the shelf life of these products, the proportion of samples where L. monocytogenes was recovered was higher in patés with expired sell by dates. There was an association between high total viable counts and the presence of L. monocytogenes. Likely routes of contamination of paté together with possible preventive measured are discussed.

Colony Count, Microbial↗

Widespread environmental contamination with Norwalk-like viruses (NLV) detected in a prolonged hotel outbreak of gastroenteritis.

A protracted outbreak of Norwalk-like virus (NLV)-associated gastroenteritis occurred in a large hotel in North-West England between January and May 1996. We investigated the pattern of environmental contamination with NLV in the hotel during and after the outbreak. In the ninth week, 144 environmental swabs taken from around the hotel were tested for NLV by nested RT-PCR. The sites were categorized according to the likelihood of direct contamination with vomit/faeces. The highest proportion of positive samples were detected in directly contaminated carpets, but amplicons were detected in sites above 1.5 m which are unlikely to have been contaminated directly. The trend in positivity of different sites paralleled the diminishing likelihood of direct contamination. A second environmental investigation of the same sites 5 months after the outbreak had finished were all negative by RT-PCR. This study demonstrates for the first time the extent of environmental contamination that may occur during a large NLV outbreak.

Caliciviridae Infections↗

Chemical suppression of contaminant metal ions using a metastable state in precolumn derivatizing HPLC: an ultratrace fluorometric detection of Al(III).

The contamination of metal ions from reagents used frequently restricts the practical detection limit of the metal ion, which itself is a source of contamination. We have found a novel solution to this problem, a chemical-suppressing method of contaminant metal ions on a reversed-phase HPLC for Al3+ with a detection limit of 7.6 x 10(-11) mol dm(-3) (2.1 ng dm(-3)) by only adding a certain agent into all stock solutions without any preconcentration or purification steps. This technique decreases the concentration of the contaminant Al3+ originating from the reagents by more than 1 order of magnitude using selective derivatization of sample Al3+ ions to a powerful fluorescent complex at a metastable state in the precolumn chelation processes. Meanwhile, the contaminant Al3+ remains as a nonfluorescent complex with a blocking reagent in order to suppress the contamination. This selective derivatization is achieved by the accumulation of several complexation processes based on the difference of formation, dissociation, and ligand-exchange kinetics and the thermodynamics between the derivatizing reagent, the 4',5'-geometorical isomer of calcein, and the blocking reagent, o,o'-dihydroxyazobenzene. This simple and smart HPLC system was validated through recovery tests of environmental and biological samples.

Journal Article↗

Susceptibility of residential wells to VOC and nitrate contamination.

Water quality of residential wells is vital to public health and a complex issue for regulatory agencies. South Carolina, a typical southeastern rural state, has no required testing of residential well water quality after initial well construction. This study used site-selection criteria to identify susceptible residential wells based on a combination of geologic vulnerability and potential contaminant loading. Geologic vulnerability was defined as increased probability of contaminants being transported from the land surface into the groundwater based on geological properties. As a surrogate for potential general contaminant loading, wells were located within 800 m of an EPA Toxics Release Inventory facility reporting VOC emissions, thus sampling was nonrandom. Seventy private residential wells were sampled for volatile organic compounds (VOCs) and nitrate-nitrogen (NO3-N) and analyzed using gas chromatography/mass spectrometry and the cadmium reduction method, respectively. Geographic Information Systems (GIS) was used to quantify four explanatory variables that affect well susceptibility to nitrate: population density, land cover, local relief (percent slope), and soil texture. VOCs were detected in 11 wells, and two sites exceeded the MCL for 1,1-dichloroethylene (36.1 microg/L) and trichloroethylene (9.0 microg/L). Elevated NO3-N (defined as > or = 1.0 mg/L) was measured in 20 wells. Logistic regression identified grassland/cultivated land cover as a variable that significantly increased the probability of NO3-N contamination (p = 0.003). Using easily accessible databases to identify factors that increase the probability of groundwater pollution could lead to more effective programs for locating residential wells that are susceptible to contamination. Increased monitoring of well water quality, as is being considered in some states, is warranted to reduce potential human exposure to contaminated drinking water.

Agriculture↗

Engineered polymeric nanoparticles for bioremediation of hydrophobic contaminants.

Sorption of hydrophobic organic contaminants, such as polycyclic aromatic hydrocarbons (PAHs), to soil has been shown to limit their solubilization rate and mobility. In addition, sequestration of contaminants by sorption to soil and by partitioning in nonaqueous phase liquids (NAPLs) reduces their bioavailability. Polymeric nano-network particles have been demonstrated to increase the "effective" solubility of a representative hydrophobic organic contaminant, phenanthrene (PHEN) and to enhance the release of PHEN from contaminated aquifer material. In this study, we investigate the usefulness of nanoparticles made from a poly(ethylene) glycol modified urethane acrylate (PMUA) precursor chain, in enhancing the bioavailability of PHEN. PMUA nanoparticles are shown to increase the mineralization rate of PHEN crystal in water, PHEN sorbed on aquifer material, and PHEN dissolved in a model NAPL (hexadecane) in the presence of aquifer media. These results show that PMUA particles not only enhance the release of sorbed and NAPL-sequestered PHEN but also increase its mineralization rate. The accessibility of contaminants in PMUA particles to bacteria also suggests that particle application may be an effective means to enhance the in-situ biodegradation rate in remediation through natural attenuation of contaminants. In pump-and-treat or soil washing remediation schemes, bioreactors could be used to recycle extracted nanoparticles. The properties of PMUA nanoparticles are shown to be stable in the presence of a heterogeneous active bacterial population, enabling them to be reused after PHEN bound to the particles has been degraded by bacteria.

Adsorption↗

Cd and proton adsorption onto bacterial consortia grown from industrial wastes and contaminated geologic settings.

To model the effects of bacterial metal adsorption in contaminated environments, results from metal adsorption experiments involving individual pure stains of bacteria must be extrapolated to systems in which potentially dozens of bacterial species are present. This extrapolation may be made easier because bacterial consortia from natural environments appear to exhibit similar metal binding properties. However, bacteria that thrive in highly perturbed contaminated environments may exhibit significantly different adsorptive behavior. Here we measure proton and Cd adsorption onto a range of bacterial consortia grown from heavily contaminated industrial wastes, groundwater, and soils. We model the results using a discrete site surface complexation approach to determine binding constants and site densities for each consortium. The results demonstrate that bacterial consortia from different contaminated environments exhibit a range of total site densities (approximately a 3-fold difference) and Cd-binding constants (approximately a 10-fold difference). These ranges for Cd binding constants may be small enough to suggest that bacteria-metal adsorption in contaminated environments can be described using relatively few "averaged" bacteria-metal binding constants (in conjunction with the necessary binding constants for competing surfaces and ligands). However, if additional precision is necessary, modeling parameters must be developed separately for each contaminated environment of interest.

Adsorption↗

Assessing organic contaminants in fish: comparison of a nonlethal tissue sampling technique to mobile and stationary passive sampling devices.

As concerns mount over the human health risks associated with consumption of fish contaminated with persistent organic pollutants, there exists a need to better evaluate fish body burdens without lethally sampling many of the important commercial and sport species of interest. The aim of this study was to investigate two novel methods for estimating organic contaminants in fish that are a concern for both fish and human health. The removal of fish adipose fins, commonly done in mark-recapture studies with salmonid species, was evaluated as a nonlethal sampling technique to estimate concentrations of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in flathead catfish (Pylodictis olivaris), relative to those found in muscle fillets of the same fish. We also assessed the efficacy of using poly(dimethylsiloxane) (PDMS) as a mobile passive sampling device (PSD) attached directly to wild flathead catfish for assessing location-specific exposure of the fish to waterborne contaminants. The results of this study have demonstrated for the first time that organic contaminant concentrations in adipose fin were highly correlated (R2 = 0.87) with muscle fillet concentrations, indicating that the adipose fin of certain fishes may be used to accurately estimate tissue concentrations without the need for lethal sampling. Moreover, mobile PSDs attached directly to fish and used here for the first time accurately estimated ultratrace concentrations of waterborne PCBs and OCPs without any apparent harm to the fish, indicating that there are no practical or physical barriers to the use of mobile passive samplers attached to aquatic organisms. Among the many practical implications of this research, two potential priority items include the analysis of organic contaminants in farm-raised and sport fish intended for human consumption, without the economic and population losses associated with lethally sampling fish to obtain tissues, and identifying specific areas where fish may be accumulating large portions of their contaminant burden.

Adipose Tissue↗

Uptake by cucurbitaceae of soil-Bome contaminants depends upon plant genotype and pollutant properties.

Three Cucurbitaceae, Cucurbita pepo L. subsp. pepo (cv. Black Beauty, true zucchini), Cucurbita pepo L. intersubspecific cross (cv. Zephyr, summer squash), and Cucumis sativis (cv. Marketmore, cucumber), were grown in rhizotrons containing soil contaminated with three classes of highly weathered, hydrophobic organic contaminants: (1) technical chlordane, (2) dichlorodiphenylethanes (DDT and DDD) and -ethene (DDE), (3) polyaromatic hydrocarbons (PAHs), and heavy metal residues. Movement of the contaminants through the soil/plant system was studied by comparing contaminant concentration in the bulk soil, the rhizosphere soil pore water, the xylem sap, and aerial tissue. This permitted, for the first time, calculation of bioconcentration factors (BCFs) based on concentration in the xylem sap versus that in the rhizosphere soil pore water. The bioconcentration factors so determined for the sum of five chlordane residues (two enantiomers of trans-chlordane, TC; two enantiomers of cis-chlordane, CC; and achiral trans-nonachlor, TN) were 36, 40, and 23 for Black Beauty, Zephyr, and Marketmore, respectively. In addition, the xylem sap of each cultivar had a consistent enantioselective profile for some of the chiral chlordane components. For the sum of dichlorodiphenylethanes and -ethene, comparable BCF values were 19, 4, and 0.8, respectively. In the case of PAHs, different BCF patterns among the cultivars were noted for three- versus four-ring compounds. Similarly, movement of heavy metals was cultivar-dependent, with cadmium BCF values 9.5, 3.5, and 0.6for Black Beauty, Zephyr, and Marketmore, respectively; the analogous BCFs for zinc were 9, 11, and 2. Thus, passage from ex planta to in planta regions of the soil/plant system is dependent not only on properties of the plant, but also on those of the pollutant. Such data will provide insight into transport mechanisms of highly hydrophobic organic contaminants, as well as heavy metal contaminants, in the soil/plant system.

Animals↗

Cadmium contamination in wild birds as an indicator of environmental pollution.

Cadmium (Cd) is an environmental pollutant that has serious toxicity in humans and animals and causes Itai-Itai disease. However, there is little available information on its contamination in wildlife as an indicator of environmental pollution. The Cd contents in the kidney and liver of 85 wild birds from 9 different prefectures in Japan were investigated. The ranges of the Cd contents in the kidney and liver in all birds were ND-174.4 and ND-21.2 microg g(-1) dry wt., respectively. The mean Cd contents were higher in the oil-contaminated birds than those in the non-contaminated ones. Furthermore, a strong correlation was obtained only between the Cd contents in the kidney and those in the liver of the oil-contaminated seabirds and not in the other non-contaminated ones. These results suggest that wild birds reflect the level of environmental contamination which should be monitored.

Animals↗

Contamination by nickel, copper and zinc during the handling of euro coins.

The introduction of the euro has revived interest in the risk of nickel allergy due to the handling of coins. In the present work, the transfer of metallic contamination during the manipulation of coins is examined by means of leaching experiments and manipulation tests. It is shown that pre-existing metallic species present on the surface of the coins are the major source of contamination during manipulation, and that friction inherent to everyday usage contributes predominantly to their transfer to the hands. The comparison of coins as to their relative risks of metal contamination should therefore rely on tests that simulate the friction inherent in everyday human handling. Carrying out such tests with the newly issued 1 euro and 2 euro pieces, we find, contrary to long-term leaching measurements, that the euros release less nickel than previously circulated pure-nickel coins, but that this decrease is less pronounced than might have been hoped for on the basis of their surface composition. When the coins are rubbed to a shiny polish before manipulation, contamination of the fingers is reduced by more than a factor of 10. A comparison of coins used in France indicates that the introduction of the common currency has led to a fourfold reduction in contamination by nickel, while causing a 45% increase in contamination by copper.

Alloys↗

Porcelain veneers: the effects of contaminants and cleaning regimens on the bond strength of porcelain to composite.

An in-vitro study was carried out to investigate the effects of contamination of the porcelain surface on the shear-bond strength of a dual-cure composite luting cement to etched, silanated porcelain. Furthermore, the effects of different cleaning regimens were studied. A total of 390 etched, silanated porcelain specimens were randomly divided into 13 groups of 30. Shear-bond strengths were measured for a control group and for specimens contaminated with saliva, die stone, and latex gloves. Freshly contaminated samples were subject to three cleaning regiments; water wash and dry, cleansing with acetone, and cleansing with 37% phosphoric acid gel. Bond strengths to the cleansed surfaces were measured. Weibull analysis and analysis of variance were applied to the results. Saliva and latex glove contamination did not significantly affect shear-bond strength. Die stone contamination markedly reduced the bond strength and cleaning did not restore the bond strength for these specimens. Contact between porcelain veneers and stone models should therefore be avoided. The wash/dry and phosphoric acid cleaning regimens did not significantly improve or reduce bond strengths for contaminated specimens. Acetone cleaning produced a marked reduction in bond strength under all experimental conditions and should not be used.

Acetone↗