SEARCH · PubMed Health

Results for “Materials Testing”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56Linked to original sources

PubMed2005

An FTIR study of the effects of artificial saliva on the physical characteristics of the glass ionomer cements used for art.

OBJECTIVE: To investigate the physical and chemical changes of five esthetic restorative materials in an artificial saliva using Fourier transform infrared spectroscopy (FTIR). METHODS: The materials included two glass polyalkenoate (ionomer) cements, one polyacid-modified resin composite, and two resin composites. Five fresh and 20 aged specimens for each material were immersed in 2 ml of artificial saliva at 37 degrees C for 1 week, 2 weeks, 1 month, and 2 months. They were examined by laser surface profilometer and FTIR. RESULTS: Surface roughness average (Ra) value showed significant differences among the physical properties of glass ionomers, polyacid-modified resin composite, and resin composites. SIGNIFICANCE: FTIR spectra showed that a major chemical changes in Fuji IX GP Fast glass ionomer cement in P-NH2 group bonding (900-1000 cm(-1)) that may explain the previously reported increase in microhardness after immersion. There was no direct correlation between surface roughness and spectral changes of the materials tested.

Compomers↗

PubMedDate not supplied

A new prosthetic design for proximal humeral fractures: reconstructing the glenohumeral unit.

A new shoulder prosthesis design for proximal humeral fractures has been developed. The rim of the articular component of this prosthesis has several holes to which the bone-tendon junction of the rotator cuff is fixed, to allow an anatomic reconstruction of the glenohumeral unit. The strength of the tuberosity fixation to this prosthesis is investigated in a cadaveric study. Artificial 4-part fractures were created in 18 human, fresh-frozen, paired shoulder joints with intact rotator cuffs. Two methods of tuberosity fixation were used in a matched-pair fashion. In group I the tuberosities were sutured to the rim of the prosthetic head, and in group II the tuberosities were circumferentially tension band-wired. Strength testing was performed on a material-testing machine, and displacement was recorded with an opto-electronic device. Both fixation methods proved to be equally reliable in the forces exerted during activities of daily living without significant displacement of the fracture fragments.

Aged↗

PubMed2001

Preparation and certification of a reference material on PCBs in pig fat and its application in quality control in monitoring laboratories during the Belgian "PCB-crisis".

In this article, the production and validation of a new certified reference material "PCBs in animal fat" for the control of the maximum level of 200 ng/g setup by the European Communities for veterinary products from Belgium is described. Three materials are established: a blank, one material with about 100 ng/g and one with about 200 ng/g (sum of seven PCBs). Data on the production and certification are given. Additionally, this material was used as an unknown test material in the quality assurance program of the Belgium meat monitoring system (before the certification of the material). While the certification was performed with an uncertainty of less than 10%, the round robin exhibited larger deviations. However, these deviations were less than 20% for most of the 30 participating laboratories. Only two had significantly higher deviations.

Adipose Tissue↗

PubMed1999

Mold testing by RAST and skin test methods in patients with allergic fungal sinusitis.

RAST tests have traditionally been considered less sensitive than skin tests during investigation of atopy involving molds. This has been attributed to technical problems such as difficulty in binding the mold antigen to the carrier substrate. Ten patients with proven allergic fungal sinusitis were evaluated for sensitivity to 11 important molds by both RAST and dilutional intradermal testing. A predictable correlation between RAST and skin test scores was observed in many, but not all, cases. Most often this disparity was in the form of greater sensitivity indicated by skin testing than by RAST, sometimes differing by as many as 3 classes. The lack of concordance was not confined to testing for the fungi cultured from the sinuses, nor was it more or less pronounced in the case of dematiaceous fungi. The most likely causes for the disparity noted in this series are subtle differences in antigens used in skin test material and for RAST standards. Skin tests allow for evaluation of delayed and late-phase reactions, a measurement not possible by specific IgE testing with RAST. Delayed skin test reactions were not noted in this series of patients. An additional important finding was the sensitivity of patients with allergic fungal sinusitis to virtually every fungal antigen to which they were tested.

Allergens↗

PubMed1996

Healing of apical periodontitis in dogs after apicoectomy and retrofilling with various filling materials.

OBJECTIVE: To histologically assess the efficacy of various retrofilling materials in apical surgery. STUDY DESIGN: The pulps of mandibular premolars in seven beagle dogs were infected; this resulted in periapical lesions. Apical surgery was performed without disinfection of the root canals. Super EBA (Harry J. Bosworth Co., Skokie, III.), two formulations of glass ionomer cement, amalgam with varnish, IRM,(Caulk Co., Ltd., Densply International, Milford, Del.) and a light-cured composite resin were the retrofilling materials used. Roots infected and apicoectomized without retrofilling were positive controls. After 6 months the dogs were killed. The experimental roots and surrounding apical tissues were prepared and histologically examined and relative percentages of bone and inflammation were calculated. RESULTS: Super EBA was consistently the best. In overall periapical condition, Super EBA was statistically superior to all materials except IRM. IRM was superior to the glass ionomer cements but not the other materials. As to percentage of bone, Super EBA was the best overall; it was superior to glass ionomer, composite resin, and the positive control but not different from amalgam or IRM. When comparing remaining numbers of inflammatory cells, Super EBA was superior with the lowest number of inflammatory cells present. CONCLUSION: Although not statistically different from IRM, Super EBA was consistently the best retrofilling material tested when compared with all retrofilling materials studied.

Alveolar Process↗

PubMed1997

Intact perceptual memory in the absence of conscious memory.

Declarative memory enables conscious recollection of the past and has been proposed to be distinct from priming, a perceptual form of memory that operates nonconsciously and improves the ability to detect or identify recently presented stimuli. Yet, it has been difficult to obtain unambiguous evidence for the independence of declarative memory and priming. The authors report the first demonstration, using matched tests, of fully intact perceptual memory (priming) in a profoundly amnesic patient (E.P.), despite at-chance recognition memory. The priming and recognition tests included tests that were matched with respect to test materials, length of the study and test lists, and the kind of cues available at test. Priming appears to reflect neural changes within perceptual processing systems that occur before information reaches the brain systems that transform visual perception into conscious visual memory.

Aged↗

PubMed2000

A laboratory study evaluating the release of hydroxyl ions from various calcium hydroxide products in narrow root canal-like tubes.

AIM: The aim of the present study was to describe pH changes in a variety of buffering solutions within a narrow test tube containing either a gutta-percha point with incorporate calcium hydroxide, a commercial calcium hydroxide paste (Calcicur) or a freshly mixed paste of calcium hydroxide in distilled water. METHODOLOGY: The test material was placed centrally in a test tube of 2 mm inner diameter. Saline (1%) was placed at one end, whilst the buffering solutions were introduced at the other. The pH of the buffering solutions was monitored using electrodes placed at each end of the test tube. RESULTS: It was found that the pH 4.01 buffer strongly resisted pH changes at levels below 6.0, whilst saliva and bovine serum was buffered less and more evenly in the whole range up to pH 11.5. The calcium hydroxide containing gutta-percha points caused the pH to increase quickly in the sodium chloride solution to levels above 11.5. However, in bovine serum, in saliva and in the pH 4.01 buffer the pH remained below 8.5, 8.0 and 6.0, respectively, 1 mm from the point. In contrast, the release of hydroxyl ions from the two calcium hydroxide pastes brought pH above pH 11.5 irrespective of the buffering of the solutions 5 mm from the paste. CONCLUSION: It is concluded that Calcicur and the calcium hydroxide-water mixture contained substantially more available calcium hydroxide than did the calcium hydroxide containing gutta-percha points, with the result that the release of hydroxyl ions from the points was limited in comparison to that from the pastes.

Animals↗

PubMed2001

The biomechanical, morphologic, and histochemical properties of the costal cartilages in children with pectus excavatum.

BACKGROUND/PURPOSE: The cause of the pectus excavatum (PE) remains unclear, although some results of research have indicated that the disturbance of the sternum or costal cartilage might be responsible for this deformity. But no decisive evidence has been gained. The authors have analyzed the biomechanical, morphologic, and histochemical properties of the cartilage in PE and intend to support the belief that the disturbance of the cartilage might contribute to the development of PE. METHODS: Thirty-eight specimens of the sixth cartilage were obtained at operation for the PE group (aged from 3 to 6 years; mean, 4.2 years). And 28 specimens of the control group (aged from 3 to 6 years; mean, 4.4 years) were gained from routine postmortem examinations in which the cause of death was unlikely to have affected the cartilage. The biomechanical test was carried out in a material testing machine (Shimadzu AG-10TA, Tokyo, Japan). The relation curve of load-deformation in tensile and compressive tests and the curve of load-time in the flexuous test were recorded automatically. The values of the ultimate strength and strain were calculated from this relation curve. The specimens also underwent H&E staining. The values of the area, circumference, mean diameter, maximal diameter, and morphologic factor of the cell and the nucleus of the cartilage in superficial and deep area were determined with the help of image analysis software (GT-2 model, China). The superficial zone (SZ) and deep zone (DZ) of the cartilage were examinated with electron microscopy (JEM-100SX, Japan). The distribution and intensity of type II collagen was shown by immunohistochemistry staining and analyzed with the image analysis software (GT-2 model, Huakang Co, Chengdu, China). The extent and distribution of proteoglycan were analyzed after Safranin-O and periodic acid shiff (PAS) staining. RESULTS: The mean strength of the costal cartilage in the experimental group was less than that in the control group in terms of tension, compression, and flexure (P <.05). The shape of the stress-strain curve for tension and compression in the experimental group was different from the control group. The fracture load in the experimental group was less than in the control group in tension (1.5 MPa versus 2.8 MPa) and in compression (.2 MPa versus 8.3 MPa). The time of fracture in experimental group was 30 seconds compared with 38 seconds in control group. No denaturation or necrosis could be found in light microscopical examination. There was no manifestation of hyperplasia or hypoplasia in the costal cartilage of the PE group. In SZ and DZ areas, the pattern and the number of mitochondria, endoplasmic reticulum, and Golgi in the experimental group were the same as the control group in transmission electron microscopy. Furthermore, the distribution and the number of proteoglycan in the 2 groups did not show a significant difference both in SZ and DZ areas. Although the distribution of the collagen in SZ areas was normal, this pattern was disturbed in DZ areas in the experiment group. The results of type II collagen immunohistochemistry examination was concordant with that change. No significant difference between control and experimental group could be seen in Safranin-O and PAS staining for proteoglycan. CONCLUSIONS: The biomechanical stability of the cartilage was decreased in the PE group. This might be caused by the disorderly arrangement and distribution of the collagen in the cartilage of PE patients. J Pediatr Surg 36:1770-1776.

Biomechanical Phenomena↗

PubMedDate not supplied

A biomechanical comparison of screw and wire fixation with and without polymethylmethacrylate re-enforcement for acetabular osteotomy stabilization in dogs.

OBJECTIVE: Compare the biomechanical characteristics of screw and wire fixation with and without polymethylmethacrylate (PMMA) re-enforcement for acetabular osteotomy stabilization in dogs. ANIMALS: Pelves removed from 8 adult mixed breed dogs weighing between 25 and 30 kg. PROCEDURE: The pubic symphysis of each pelvis was split and a central transverse acetabular osteotomy was performed. One hemipelvis from each dog was stabilized with the composite fixation (interfragmentary Kirschner wire, two screws and a figure-of-eight orthopedic wire with PMMA). The contralateral hemipelves was stabilized with an interfragmentary Kirschner wire, two screws, and a figure-of-eight orthopedic wire without PMMA. All hemipelves were tested in bending by using a materials testing machine at a cross head speed of 5 mm/min. An extensometer was placed on the dorsomedial surface of the hemipelves centered over acetabular osteotomy to record distraction of the osteotomy during loading. A load/deformation curve and a load/distraction curve was produced for each hemipelvis. The slope for the initial linear portion of the load/deformation curve and the load/distraction curve, yield load and maximum load sustained were compared between repair groups using a paired t-test with P < .05 considered significant. RESULTS: The slope of the load/deformation curve was significantly greater (P = .001) for hemipelves stabilized with the composite fixation (mean +/- SD: 69 +/- 18 N/mm) compared with hemipelves stabilized without PMMA (mean +/- SD: 39 +/- 8 N/mm). There was no significant difference (P = .593) between repair groups in the slope of the load/distraction curves as measured on the extensometer. Yield load was significantly greater (P = .0002) for hemipelves stabilized with the composite fixation (mean +/- SD: 184 +/- 25 N) compared to hemipelves stabilized without PMMA (mean +/- SD: 74 +/- 12 N). Maximum load sustained was also significantly greater (P = .013) for hemipelves stabilized with the composite fixation (mean +/- SD: 396 +/- 71 N) compared to hemipelves stabilized without PMMA (mean +/- SD: 265 +/- 94 N). Failure of hemipelves stabilized with the composite fixation occurred primarily by ventrolateral bending of the cranial and caudal pelvic segments at the osteotomy site. Failure of hemipelves stabilized without PMMA occurred by ventrolateral bending of the cranial and caudal pelvic segments at the osteotomy site with pronounced concurrent ventrolateral rotation of the cranial pelvic segment. CONCLUSION: PMMA improves the mechanical characteristics of acetabular fracture fixation, at least in part by neutralization of rotational forces. The results of this study justify use of PMMA as a component of the composite fixation when repairing acetabular fractures.

Acetabulum↗

PubMed2001

[Human cultured lens cells. II. Characterization of established lens cell lines and test of their suitability for cytotoxicity tests].

BACKGROUND: Human lens cells in culture may be valuable tools to discover cataractogenic risk factors. Here we report on the characterization of established human lens cells and their use in cytotoxicity tests. MATERIAL AND METHODS: Adhesion dependence was tested by an autoradiographic method. Soft agar test was performed to secure anchorage-independent growth. Laser scan microscopy was used for measuring the nucleus-cytoplasmic relationship. The cytoskeleton was visualized by fluorescence microscopy. Investigations on cytotoxicity were done by neutral red cytotoxicity assay and 3H-thymidine incorporation. The labeling index was determined by the BrdU-method. RESULTS: Two lens cell lines were transformed into fast growing cells. They are characterized by a partial loss of adhesion dependence, cell growth in soft agar, high cloning efficiency and reduced serum requirement. However, the nucleus-cytoplasmic relationship did not change very much in comparison to non-transformed lens cells. The organization of the cytoskeleton was cell shape dependent. The intermediate filaments were from the vimentin type. The established cell lines proved to be highly sensitive to ethanol and mitomycin C. CONCLUSIONS: The established human lens cell lines are well suited to screen for cytotoxic substances in vitro which might be cataractogenic risk factors in vivo.

Animals↗

PubMed2005

The versatility of progress testing assessed in an international context: a start for benchmarking global standardization?

Sharing and collaboration relating to progress testing already takes place on a national level and allows for quality control and comparisons of the participating institutions. This study explores the possibilities of international sharing of the progress test after correction for cultural bias and translation problems. Three progress tests were reviewed and administered to 3043 Pretoria and 3001 Maastricht medical students. In total, 16% of the items were potentially biased and removed from the test items administered to the Pretoria students (9% due to translation problems; 7% due to cultural differences). Of the three clusters (basic, clinical and social sciences) the social sciences contained most bias (32%), basic sciences least (11%). The differences that were found, comparing the student results of both schools, seem a reflection of the deliberate accentuations that both curricula pursue. The results suggest that the progress test methodology provides a versatile instrument that can be used to assess medical schools across the world. Sharing of test material is a viable strategy and test outcomes are interesting and can be used in international quality control.

Benchmarking↗

PubMed1992

The biomechanical efficacy of an oscillating K-wire driver.

A new oscillating drill, designed for insertional ease and safety, was biomechanically tested using an MTS 812 servohydraulic material testing machine (Instrom). Holding strength and drilling force were compared against a traditional rotary drill using rabbit tibias to approximate the diameter and cortical thickness of human metacarpals. Three differently sized (0.028-, 0.045-, and 0.062-in. diameter) K-wires were evaluated for each drill. Mean peak axial load (drilling force) was significantly different for each wire driver type in each of the three sized K-wires (p < or = 0.01). The oscillating drill used an average of 3 N less force to penetrate either cortex. Mean peak pull-out force (holding strength) was higher for the oscillating drill, but the difference was not significant (p > or = 0.5). This study indicated that the oscillating drill required less force for insertion and had a similar holding strength as the rotary drill. In addition, our drill has been shown to be less damaging to surrounding soft tissues. This new type of drill is likely to be advantageous in the fields of hand, microsurgery, orthopedic, and plastic surgery, where bone fixation is often near vital neurovascular structures.

Animals↗

PubMed1995

Evaluation of a new silicone elastomer for maxillofacial prostheses.

PURPOSE: Although numerous advances in maxillofacial materials have been made in the past several years, the need for improvement continues. Currently, the most widely used materials are the silicones, especially the room temperature-vulcanizing type. This study compared the physical properties of a new silicone material Cosmesil K10 (Cosmedica Ltd, Cardiff, United Kingdom) with those of MDX4-4210 (Dow Corning Corporation, Midland, MI), a popular material for maxillofacial prostheses. MATERIALS AND METHODS: The properties that were investigated were tensile strength, modulus at 100% elongation, percentage of elongation, tear strength, and hardness. The properties tested were selected because of their clinical significance for fabricating maxillofacial prostheses. Tensile strength and elongation were measured with a Monsanto Tensometer (Monsanto Ltd, Swindon, England) and dumbell-shaped specimens according to the International Organization for Standardization (ISO) specification no. 37. The tear test was performed on the Monsanto machine with unnicked 90 degree angle-shaped specimen following the ISO specification no. 34. The type A Shore durometer was used to measure hardness on specimens 25 x 25 x 10 mm according to the American Society for Testing Materials specification no. D2240. RESULTS: The results showed that MDX4-4210 had a greater tensile strength and modulus (P = .0002; P = .0015). No significant difference (P = .1986) was found for the percentage of elongation between MDX4-4210 and Cosmesil K10. Cosmesil K10 had a greater tear strength and was slightly harder (P = .0022; P = .0421) than MDX4-4210. CONCLUSIONS: Cosmesil K10 showed physical properties similar to those of MDX4-4210. An improvement in the predictability of the mechanical behavior of Cosmesil K10 would further enhance the value of the material.

Elasticity↗

PubMed1967

Detection of clostridial hemolysin formed in vivo.

Experimental clostridial myonecrosis closely resembling gas gangrene was produced in goats by the intramuscular injection of washed clostridia suspended in adrenalin. The preparation provides a model for the study of clostridial myonecrosis that is relatively isolated from preceding trauma. A new test for the demonstration of clostridial exotoxins, the hemolysin indicator plate test, was described. This test gave reliable results within 6 hr, and only minute quantities of test material were required. Application of this test to would exudates of goats with experimental clostridial myonecrosis demonstrated the presence of the gamma toxin of Clostridium novyi, alpha toxin of C. septicum, and the alpha toxin of C. perfringens in exudates from animals injected with washed Clostridium bacilli suspended in adrenalin. Exudates from goats injected with C. perfringens were lethal for mice and produced necrosis of guinea pig skin typical of C. perfringens. The convincing demonstration of clostridial exotoxins formed in vivo in this experimental model could be the basis for definition of clostridial exotoxin actions which have evaded study in the past.

Animals↗

PubMedDate not supplied

Characterization of cross-linked two-phase acrylic polymers.

A cross-linked network was formed in the particulate disperse phase carried over from the soluble pearls only in one material tested (L). The preparation of this material involved a slow rate of polymerization that allowed sufficient time for imbibition of the cross-linking monomer by the particles. In two of the materials (CR and S), the particulate phase was extractable and the remaining cross-linked matrix could be characterized for equilibrium swelling by volumetric measurements. Equilibrium swelling values were used to estimate densities of elastically effective chains in the network.

Acrylic Resins↗

PubMedDate not supplied

Exercise effects on the strength of the rat anterior cruciate ligament.

Seventy-five rats were divided into a control and four exercise groups of differing frequency and duration. After 8 weeks of endurance-type exercise on a motorized treadmill, the rats were sacrificed and the anterior cruciate ligaments were tested to failure on an Instron materials testing machine at a strain rate of 95% sec-1. Of the 121 ligaments tested, 119 failed by pure interstitial failure. There was significant increase in both the strength and stiffness of the anterior cruciate ligaments in the exercised rats but those rats exercised more frequently (daily vs. every other day) and for shorter duration (30 min rather than 60 min) had the greatest increase in strength. This study has shown that endurance-type exercise is beneficial to the anterior cruciate ligament as both strength and stiffness are increased and functionally the ligament remains unchanged by exercise.

Animals↗

PubMedDate not supplied

Mechanical tensile properties of the quadriceps tendon and patellar ligament in young adults.

We analyzed mechanical tensile properties of 16 10-mm wide, full-thickness central parts of quadriceps tendons and patellar ligaments from paired knees of eight male donors (mean age, 24.9 years). Uniaxial tensile testing was performed in a servohydraulic materials testing machine at an extension rate of 1 mm/sec. Sixteen specimens were tested unconditioned and 16 specimens were tested after cyclic preconditioning (200 cycles between 50 N and 800 N at 0.5 Hz). Mean cross-sectional areas measured 64.6 +/- 8.4 mm2 for seven unconditioned and 61.9 +/- 9.0 mm2 for eight preconditioned quadriceps tendons and were significantly larger than those values of seven unconditioned and seven preconditioned patellar ligaments (36.8 +/- 5.7 mm2 and 34.5 +/- 4.4 mm2, respectively). Mean ultimate tensile stress values of unconditioned patellar ligaments were significantly larger than those values of unconditioned quadriceps tendons: 53.4 +/- 7.2 N/mm2 and 33.6 +/- 8.1 N/mm2, respectively. Strain at failure was 14.4% +/- 3.3% for preconditioned patellar ligaments and 11.2% +/- 2.2% for preconditioned quadriceps tendons (P = 0.0428). Preconditioned patellar ligaments exhibited significantly higher elastic modulus than preconditioned quadriceps tendons. Based on mechanical tensile properties analyses, the quadriceps tendon-bone construct may represent a versatile alternative graft in primary and revision anterior and posterior cruciate ligament reconstruction.

Adult↗

PubMed2002

Initial pull-out strength of tendon sutures: an in vitro study in sheep Achilles tendon.

Forty-eight fresh frozen sheep Achilles tendons were used to compare the pull-out strengths of Kessler, Bunnell and locking loop techniques which are the standard configurations described for Achilles tendon repair. A simulated Achilles tendon rupture was done with a tenotomy made 2 cm proximal to the calcaneal insertion. One of the configurations was placed at the distal end of the proximal portion of the tendon specimens using No. 5 Ticron. The distal ends of the suture materials were left free and were not used to connect the proximal and distal portions of the tendon. Using a servohydraulic materials testing machine, each tendon was tested to failure in tension at a displacement rate of 20 mm/min. All the specimens failed due to pull-out of the suture material. Since the cause of failure was suture material breakage in the previous studies reporting repair strength, they were unable to represent the effect of configuration on the strength. This study is the first to represent the effect of configuration on the initial strength since there is no failure due to suture material breakage.

Achilles Tendon↗