PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Dentin”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources

[Attrition, dentin apposition and protein synthesis in the pulp and desmodont of young and old rats].

Occlusal attrition and responsive adaptations in the pulp-dentinal unit are still problematic. In this study, up to 2 years-old rats were used to measure the amount of occlusal attrition, of dentin apposition and of the incorporation of 3H-proline into the pulpal and periodontal ligament tissues. Two to four SIV-rats each, 45, 365 and 730 days of age, were once injected with 3H-proline 2 hours or 5 days prior to exitus. After cardiac perfusion, the molar blocks of both jaws were decalcified in EDTA and divided into bucco-oral and mesio-distal slices. The latter were embedded in Epon. Semithin sections served to measure the amount of attrition and of tertiary dentin apposition, as well as for autoradiographic labelling and determination of the rate of dentin apposition and proline incorporation in pulpal and periodontal ligament tissues. The results show that (1) the molar cusps lost up to 40% of their initial height during the two years of life, (2) occlusal dentin apposition in the intercuspal region led to an increase in dentinal thickness by 50 to 70%, while in the pulp horn region dentinal apposition occurred early in life and later did not keep phase with attrition, and (3) protein synthesis in pulp and periodontal ligament essentially did not change within the two years of life. These findings are related to that of other authors and discussed in connection with dentinal innervation.

Aging↗

Application of solubility parameter theory to dentin-bonding systems and adhesive strength correlations.

The principal aim of this study was to investigate the relationships between the solubility parameters of ectched dentin, and adhesive primer solutions and adhesive bond strength. Solubility parameters characterize the molecular interactions which determine physical properties such as wetting, and thus can serve as tools to aid development of polymeric adhesives and interpenetrating polymer networks. If an adhesive monomer has a solubility parameter close to that of a polymer substrate, then the monomer may act as a solvent for the polymer and penetrate below the surface. Subsequent polymerization of the monomer may then produce an interpenetrating network, thus adhering without necessarily forming primary chemical bonds to the substrate. The dentin substrate considered in this study was abraded dentin treated with ethylenediaminetetraaceitc acid. Solubility parameters delta pr, delta h, and delta d calculated for the etched dentin substrate were 20.3, 23.6, and 16.0 (J/cm3)1/2, respectively. Solubility parameters of the primers were expressed using Hansen's three-dimensional scheme. The data indicate a correlation between the calculated solubility parameters of the etched dentin, and dentin primers and the resulting bond strengths. The results corroborate the significance of solubility parameter considerations for adhesive bonding to dentin.

Acid Etching, Dental↗

Diffusion-induced water movement within resin-dentin bonds during bonding.

It is thought that water-filled channels and nanovoids in resin-dentin bonds represent potential sites for degradation of bonds or hydrolysis of collagen or both. How water gains access to bonded interfaces is not clear. This study evaluated the diffusion-induced water uptake through resin-dentin interfaces during bonding. Two light-cured total-etch adhesive systems (Excite and One-Step Plus) and a chemical-cured adhesive (Amalgambond Plus) were used in this study. Dentin disks were placed in a split-chamber device, and the fluid movement across dentin was measured, with and without a physiological pressure, during bonding procedures and 24 h after bonding. For light-cured adhesives in the experimental groups, a 6 min interval of dark storage was conducted prior to light-curing, to evaluate the diffusion of water through the uncured resin monomers, and to test the effect of prolonged infiltration time of adhesives on water permeability of bonds. Prolonged adhesive infiltration reduced the water permeability of resin-dentin bonds for light-cured adhesives. Water gradients produced by bonding systems contribute to water movement across the dentin-adhesive interfaces during bonding procedures. Differences in chemical formulations for adhesive systems may lead to differences in the extent of diffusion-induced water movement and the amount of water within the resin-dentin bonds.

Dentin↗

Influence of ascorbic acid on bonding of peroxide-affected dentin and 4-META/MMA-TBB resin.

The purpose of this study was to evaluate the tensile bond strength (TBS) to peroxide-exposed dentin. Furthermore, the effect of ascorbic acid (AA) on the bond strength of peroxide-exposed dentin was investigated. Extracted bovine dentin was exposed to 10% carbamide peroxide, 30% hydrogen peroxide, or distilled water for 30 min, then treated with 10% AA (0, 30, 90, and 180 min), and conditioned with 10% citric acid/3% ferric chloride. The polymethyl-methacrylate (PMMA) rod was bonded to the treated bovine dentin with 4-META/MMA-TBB resin. A minidumbbell-shaped bonded specimen was prepared from these bonded assemblies and the TBS was tested. The fractured surfaces were also observed with a scanning electron microscope. Exposure to peroxide before bonding significantly reduced bond strength. The application of AA to the peroxide-exposed dentin increased bond strength. On the other hand, an adverse effect of AA was found in distilled water-affected dentin. Extended resin fibers were partially seen in the peroxide-exposed dentin. In conclusion, peroxide reduced the bond strength, and the stronger the oxidation, the weaker the obtained bond. Antioxidation with AA recovered the bond strength, and this effect increased the longer the AA was applied.

Animals↗

Bond strength of a compomer to dentin under various surface conditions.

This study determined the influence of different dentin pretreatments on the shear bond strength of an adhesive system and corresponding compomer material. One hundred and twenty freshly extracted human molars were ground with wet SiC paper to expose flat oral/buccal surfaces of superficial dentin. The teeth were assigned to 12 treatment groups (n = 10) based on dentin surface finish (600-grit SiC vs. air abrasion vs. 40 microns diamond bur), surface conditioning (acid etching vs. no etching), and moisture content of the dentin (moist vs. dry). Cylinders of Compoglass F compomer were bonded to the dentin with Syntac Single-Component. After 24-h storage in distilled water, the specimens were debonded in shear mode. Bond strengths in MPa (SD) were calculated and bonding sites were analyzed for the mode of failure. Three-way ANOVA revealed significantly higher bond strength values for acid etched specimens (P = 0.001). Moisture content of the dentin surface (P = 0.614) and mechanical surface finish (P = 0.367) had no significant influence on the results. Debonding in unetched groups ranged from 94 to 100% adhesively. Acid etched groups showed adhesive failures ranging from 56 to 100%. To obtain a more reliable bond it is recommended that dentin is acid etched prior to the bonding of a compomer.

Acid Etching, Dental↗

Dentin dysplasia type I: a scanning electron microscopic analysis of the primary dentition.

Dentin dysplasia type I (DD-I) is a rare autosomal dominant disorder which affects both the deciduous and permanent dentitions. The affected deciduous and permanent teeth have short conical roots with sharp, apical constrictions and frequently periapical radiolucencies in the absence of caries. Apical to a thin layer of normal coronal dentin are large, calcified, dentin masses which nearly obliterate the pulp chamber and canals. Presented here are light microscopic and scanning electron microscopic observations of deciduous teeth from three unrelated persons with the disorder. In general, the deciduous teeth had (1) normal enamel, (2) a thin layer of normal dentin adjacent to the dentinoenamel junction, (3) a crescent-shaped pulpal remnant below the normal dentin, (4) dysplastic dentin masses (ranging from atubular to a few small tubules) between which are spaces presumed to previously have contained smaller remnants of the original mesenchymal dental papilla, and (5) root dentin, which is dysplastic throughout. The SEM-defined phenotype, however, was noticeably variable among all three persons. Based on the current concepts of tooth morphogenesis, it is most likely that the abnormal root morphology of DD-I teeth is secondary to the abnormal differentiation and/or function of the ectomesenchymally derived odontoblasts.

Adult↗

Rate of formation of tertiary dentin in dogs' teeth in response to lining materials.

The rate of tertiary dentin produced in response to four lining materials placed in standardized cavities in dogs' teeth was measured over a period of 119 days. Sterile denatured dentin ash was used as a control material in an attempt to quantify tertiary dentin formation in response to cavity preparation. In all periods the amounts of tertiary dentin formed beneath the control material were significantly smaller than those formed beneath any of the four lining materials. In the first 98 days the rate of formation of tertiary dentin beneath calcium hydroxide (Calxyl) was significantly greater than that beneath the material containing corticosteroid (Ledermix cement). In the last 21 days there was no difference in daily rates of tertiary dentin production beneath all of the lining materials. With all the lining materials there was a highly significant difference between the daily amounts of tertiary dentin formed in the first 6 weeks and those in the last 11 weeks.

Animals↗

New adhesives in Class V restorations under combined load and simulated dentinal fluid.

OBJECTIVES: This study compared the efficacy of three dentinal adhesives using the "all etch" technique (All-Bond 2, Bisco; Scotchbond MP,3M Dental Products Co.; OptiBond, Kerr) with a dentinal adhesive which still uses phosphoric acid to condition enamel and a self-etching primer for dentin (A.R.T.-Bond, Coltene/Whaledent). METHODS: Eight V-shaped mixed Class V restorations were placed per group in extracted human premolars. The restorations were subjected to 1,200,000 mechanical occlusal cycles (max. force 49 N; frequency 1.7 Hz) and 3,000 simultaneous thermal cycles (5-50-5 degrees C). Dentinal fluid was simulated using 1:3 diluted horse serum and fed into the pulp chamber both during restoration and loading. Percentages of "continuous margin" were assessed on SEM replicas of enamel and dentinal margins at 200x magnification immediately before and after stressing, respectively. RESULTS: No significant differences were observed before stress between the materials either in enamel or in dentin. After stress, however, OptiBond and A.R.T.-Bond performed significantly better in dentin than the two other adhesives (Kruskal-Wallis, Mann-Whitney; p < 0.05). Although high initial values were observed, All-Bond 2 and Scotchbond MP were not stress-resistant under simulated physiological conditions. SIGNIFICANCE: The predicted clinical potential of All-Bond 2 and Scotchbond MP is inferior to that of OptiBond and A.R.T.-Bond.

Acid Etching, Dental↗

SEM characterization of the resin-dentine interface produced in vivo.

OBJECTIVES: A freeze-fracture technique with critical-point drying has been shown to preserve the structure of collagen in demineralized primed dentine in vitro (Titley K et al. Am J Dent 1994; 7: 22-26). This study utilized the technique to examine the attachment to dentine produced in vivo All-Bond 2 (AB2), Scotchbond Multi-Purpose (SBMP) and Prisma Universal Bond 3 (PUB3). METHODS: Eighteen medium-depth restorations were placed in buccal and/or lingual surfaces of premolar teeth (n = 7) scheduled for extraction for orthodontic purposes. After extraction, the restored teeth were split transversely by freeze-fracture, critical-point dried and examined under SEM. RESULTS: AB2 and SBMP produced significant gap-free attachment to dentine showing similar microscopic structural features. Resin interdiffusion with collagen fibrils of the intertubular matrix was clearly seen. Microspaces, observed at the periphery of the widened tubules and among the interdiffused collagen fibrils, suggested incomplete resin penetration. Fractures occurring parallel with the interface frequently showed detachment in the deepest layers of the hybrid zone. Adhesive gaps were seen at the resin-dentine interface, indicating some clinical technique failure. The PUB3 attachment was generally incomplete, with separation between the primed dentinal surface and the composite restoration. Where present, the bonded interface showed no evidence of true hybridization. CONCLUSION: Dentine conditioning, as a separate step, prior to priming, appears to be an important factor in successful resin-dentine attachment. Critical-point drying revealed variations in the degree of resin interdiffusion with intertubular collagen, suggesting potential sites for bond failure.

Acid Etching, Dental↗

Effect of conditioning time of self-etching primers on dentin bond strength of three adhesive resin cements.

OBJECTIVES: To evaluate the effect of increasing the dentin conditioning time with self-etching primers of different aggressiveness (pH) on the microtensile bond strength (muTBS) of three resin cements. MATERIALS AND METHODS: Pre-cured composite blocks were cemented with M-Bond, Bistite II DC, or Panavia F to flat occlusal dentin surfaces of human third molars, which were conditioned with M-Bond or Bistite II-primer for 30, 60 or 180 s or with Panavia-primer for 60 or 180 s. Each dentin-composite block assembly (four in each group) was longitudinally sectioned to obtain 1x1 mm microbars and tested for the muTBS. The morphology of the conditioned dentin surface and the hybrid layer was examined with SEM. RESULTS: Extending the primer conditioning time for Bistite II DC from 30 to 60 s significantly increased the muTBS (p<0.001) but did not further increase from 60 s to 180 s. For M-Bond there was only a significant increase from 30 to 180 s (p<0.05). For Panavia F the primer-conditioning time had no influence on the muTBS. SEM observations of conditioned dentin showed that the Bistite II DC and M-Bond self-etching primers with the lowest pH completely dissolved the dentin smear layer and plugs and formed well-defined hybrid layers. This was not found for Panavia F. SIGNIFICANCE: Dentin bond strength of resin cements using more aggressive self-etching primers is improved by increasing the conditioning time. To enable resin infiltration of highly filled resin cements, sufficient smear layer dissolution is necessary.

Acid Etching, Dental↗

Effect of simulated pulpal pressure on dentin permeability and adhesion of self-etch adhesives.

OBJECTIVES: Dentin bonds made with one-bottle etch-and-rinse and self-etch adhesives are affected by the formation of interfacial blisters, porosities and deterioration. The first objective of this study was to evaluate the fluid flow through resin-dentin interfaces created by self-etching adhesives applied to deep dentin using a replica technique and by directly measuring dentin permeability (P). The second objective was to examine the effect of intrapulpal pressure on the microtensile bond strength of these adhesives. METHODS: A fluid-transport model was used to measure the fluid permeability (%P) through different adhesives. Impressions of bonded dentin were taken with a polyvinylsiloxane impression material to monitor fluid transudation from the surface of the adhesive. Positive replicas were fabricated for SEM examination. Two groups of resin-bonded specimens (pulpal pressure versus no pulpal pressure) were created for microtensile bond strength evaluation. Adhesive application was performed under 0 cm H(2)O. Pulpal pressure group was submitted to 20 cm H(2)O of pulpal pressure during build-up procedures. RESULTS: Clearfil Protect Bond exhibited the lowest permeability and fewest numbers of fluid droplets over the surface of the bonded dentin. G-Bond and Clearfil-S3 Bond were more permeable than Clearfil Protect Bond. One Up Bond F was the most permeable adhesive. A highly significant correlation was observed between the relative permeability of these adhesives (%P) and the number of fluid droplets on the adhesive surfaces. The application of pulpal pressure significantly reduced bond strength. SIGNIFICANCE: Resin-dentin bonds created by contemporary self-etch adhesives are susceptible to fluid permeation induced by pulpal pressure. HEMA-based adhesives showed the largest reductions in bond strengths after pulpal pressure application.

Acid Etching, Dental↗

In vitro permeability of furcation dentin in permanent teeth.

Extracted unerupted permanent third molars with the occlusal half of the crown and apical half of the roots removed were cemented to Plexiglas blocks. Using a positive pressure system in which the movement of fluid across the dental tubules could be measured, the permeability of furcation dentin was measured before and after alteration of the furcation thickness. Subsequently, measurements of reduction in thickness of cementum and dentin were performed. Furcation dentin permeability was found to increase as the cementum and dentin thickness was reduced and the smear layer removed. The permeability values obtained for the furcation dentin were similar to those found in radicular dentin in general, indicating that root dentin has a low permeability and that it has good barrier properties. The data would suggest that any bone resorption seen under the furcation region of permanent molars is more likely to be due to the presence of accessory canals than due to permeation directly through furcation hard tissues.

Adolescent↗

Effect of endodontic procedures on root dentin permeability.

The purpose of this study was to quantitate the sequential effects of endodontic procedures on the permeability of human root dentin in vitro. Forty single-rooted teeth were used. Both the crown and the apical 2 mm of the root were removed. The hydraulic conductance of the root before and after various endodontic procedures was measured using a fluid filtration method. Measurements were also made of dentin thickness, intracanal diameter changes, and changes in intracanal surface area. The results showed that instrumentation by K files alone or in combination with Gates Glidden drills did not alter radicular dentin permeability when the cementum remained intact. After removing the cementum, the creation of a smear layer and smear plugs on the canal surface tended to offset the expected increase in dentin permeability created by increasing the intracanal surface area and decreasing root dentin thickness. EDTA treatment inside the instrumented canal to remove the smear layer did not increase permeability significantly. The use of K files followed by Gates Glidden drills tended to remove more cervical dentin, increased the intracanal surface area, and increased the hydraulic conductance of root dentin more than the use of K files alone.

Dental Cementum↗

Heterogeneous distribution of single-bottle adhesive monomers in the resin-dentin interdiffusion zone.

OBJECTIVES: The purpose of this study was to investigate whether monomer separation occurs in single-bottle adhesives applied on acid-etched dentin surfaces. METHODS: Smear-layer covered dentin specimens produced from sound premolars, were acid-etched and analyzed by micro-MIR FTIR spectroscopy, before and after treatment with the single-bottle adhesives One-Step, Prime and Bond 2.1, Scotchbond 1 and Syntac-Sprint. The difference spectra (etched, and primed minus etched of the same dentin surfaces) were plotted and compared with original adhesive spectra. The C=C/C...C (aromatic adhesives) and C=C/C=O (aliphatic adhesives) peak area ratios were used to evaluate the extent of monomer separation relative to original adhesive spectra at the uppermost 2 microm of the resin-dentin interdiffusion zone. Three dentin specimens were used for each adhesive. One-way ANOVA and Newman-Keuls tests were performed to assess the statistically significant differences (alpha=0.05). RESULTS: All the adhesives demonstrated separation of monomer components on etched dentin ranging in mean values from 68.7 to 81.9% relative to reference. High molecular weight hydrophobic (i.e. BisDMA, BisGMA, BisGMA adducts) and hydrophilic monomers (i.e. BPDMA) predominated at the region probed. Prime and Bond 2.1 demonstrated the highest extent of monomer separation. SIGNIFICANCE: Heterogeneous monomer distribution following application to etched dentin may affect the curing performance of single-bottle adhesives within the resin infiltrated region and consequently, the mechanical and chemical stability of the network formed.

Acid Etching, Dental↗

Effect of resins sealing of dentin on the bond strength of ceramic restorations.

OBJECTIVES: The purpose of this in vitro study was to evaluate shear bond strengths when ceramic cylinders were bonded to dentin following the use of different dentin adhesive systems as desensitizers. METHODS: Freshly extracted human molars were selected. Their buccal dentin was exposed and a standardized circular area was isolated. Dentin desensitizers included an experimental self-curing 'one-bottle' adhesive system, two light-curing 'one-bottle' bonding systems and a conventional three component adhesive system, which was selected as a control system. Ten teeth were prepared for each test group (40 teeth total). A layer of an eugenol-free temporary cement was applied on the treated surface and the specimens were stored in distilled water for 1 week. After the removal of cement, the dentin surfaces were cleaned, re-etched and a layer of the experimental self-curing 'one-bottle' adhesive was applied. Standardized cylindrical ceramic samples were luted using a resin cement. One week later, shear bond strengths were determined using a universal testing machine. The bond strength values obtained were tested for a statistical significance with Kruskall-Wallis one-way analysis of variance. The type of failure occurring on each specimen was observed and recorded by means of an optical and a scanning electron microscope. RESULTS: Mean shear bond strengths of the four groups ranged from 25.84 to 27.83 MPa and they were not significantly different. Most failures were cohesive in dentin. SIGNIFICANCE: The use of an adhesive system as a dentin desensitizing agent before cementation does not alter the retentive strength of adhesively luted ceramic restorations.

Analysis of Variance↗

Influence of drying and HEMA treatment on dentin wettability.

OBJECTIVES: The aim of this study was to evaluate the effect of drying time and primer pre-application (35% HEMA in water) on water spreading/infiltration on dentin. METHODS: Freshly extracted molars were embedded in resin and sectioned on their coronal side. Flat occlusal dentin surfaces were prepared using wet SiC paper from nos. 80-4000. A computerized contact angle device complementing a special software (Wingoutt) was used to measure the contact angle (theta) kinetics of a reference liquid (pure H(2)O) in the ten groups each of ten dentin surfaces during 120 s: Gp1: etched (37% phosphoric acid for 15 s) and blot-dried; Gp2: 3 s dried; Gp3: 5 s air-dried; Gp4: 10 s air-dried; Gp5: 20 s air-dried; Gp6: 30 s air-dried; Gp7: 1 min dried with hair dryer; Gp8: 5 s air-dried and HEMA treated; Gp9: 30 s air-dried followed by HEMA treatment; Gp10: HEMA treated prior to 30 s air-drying. three drops were applied on each sample. 40 contact angles were recorded for each drop with a frequency of one measure every 3 s. A one-way ANOVA test was used for data analysis. A PLSD test was conducted to identify statistical differences between pairs of groups at a reliability level of 95%. RESULTS: At each measurement time, air-drying, whatever its duration, significantly decreased the wetting ability of the pure water on the etched dentin in comparison with the blot-dried group. The contact angle increases with drying time. No significant differences in water contact angle were obtained between 3, 5 and 10 s in spite of a slight decrease in the spreading/infiltration ability of water the longer the drying time. HEMA increases the spreading/infiltration ability of water on 5 or 30 s air-dried etched dentin surfaces; 30 s air-drying did not alter the spreading/infiltration ability of the water on etched and HEMA treated dentin. SIGNIFICANCE: Dentin hydrophobicity increases depending on air-drying time. HEMA-based primer allows to prevent collagen collapse, which may be created by air-drying and partly rewet the collapsed collagen network.

Analysis of Variance↗

Micro-tensile bond testing of resin cements to dentin and an indirect resin composite.

OBJECTIVES: Micro-tensile bond strength (microTBS) evaluation and fractographic analysis were used to compare four resin cement systems (AC: All-Bond 2/Choice; RX: Single Bond/RelyX ARC; SB: Super-Bond C & B; and PF: Panavia F) in indirect composite/dentin adhesive joints. METHODS: Flat dentin surfaces were created on extracted human third molars. The resin cements were used according to the manufacturers' instructions for bonding silanized composite overlays to deep coronal dentin. 0.9x0.9 composite-dentin beams prepared from the luted specimens were stressed to failure in tension. Dentin sides of all fractured specimens were examined by scanning electron microscopy (SEM) to examine the failure modes. In group PF, morphologic features that could not be resolved at the SEM level were further validated by transmission electron microscopy (TEM) examination of the SEM specimens. RESULTS: Statistical analyses revealed significant difference (p<0.05) among microTBS and failure modes in the resin cement groups. The two groups (AC and RX) with highest microTBS failed predominantly along the composite overlay/cement interface. Cohesive failure in resin cement was primarily observed in group SB that exhibited intermediate microTBS values. In group PF with the lowest microTBS, failure occurred mostly along the dentin surface. Globular resin agglomerates seen by SEM on PF-treated dentin were distinguished from silica fillers by TEM. SIGNIFICANCE: The bond between the processed composite and the luting resin cement was the weak link in indirect composite restorations cemented with AC or RX. Super-Bond C&B exhibited intermediate tensile strength and Panavia F is less reliable when used in conjunction with a self-etching primer for bonding indirect restorations to dentin.

Analysis of Variance↗

Determination of residual double bonds in resin-dentin interface by Raman spectroscopy.

OBJECTIVES: The quality of the hybrid layer is believed to be more important than the thickness of this layer. The purpose of this study was to investigate a method to analyze the percentage of adhesive resin residual double bonds in the dentin-resin interface using laser Raman spectroscopy. METHODS: Bovine dentin was treated with dentin adhesives and resin composite was bonded according to the manufacturers' instructions. The specimens were sectioned parallel to dentinal tubules and the surfaces were then polished to 1 microm diamond pastes. Raman spectra were recorded along a line perpendicular to the dentin-resin interface in steps of 0.2 microm. The measurement of residual C=C bond was made on a relative basis by comparing the C=C unpolymerized methacrylate stretching vibration (1638 cm(-1)) against the C=O stretching mode of the ester group (1719 cm(-1)). The percentage of residual double bonds including pendant and monomeric double bonds was calculated by comparing the obtained ratio with that of uncured adhesive resin. RESULTS: The amount of residual double bonds in the hybrid layer varied from 10 to 25% compared to the uncured adhesives, a relatively higher percentage was detected for Fluoro Bond (12.3-23.6%) and Single Bond (9.5-21.8%), and lower for Mac Bond II (10.6-18.0%) and Mega Bond (10.7-16.3%). No relationship was seen between the percentage of remaining double bonds and the location within the resin-dentin interface. SIGNIFICANCE: Laser Raman microscopy used was a useful tool for measuring the residual double bonds in the dentin-resin interface.

Analysis of Variance↗