SEARCH · PubMed Health

Results for “Humic Substances”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources

PubMed2006

Compost effect on soil humic acid: A NMR study.

The humic acid (HA) fraction of a food and vegetable residues compost (CM) was taken as indicator to trace the fate of CM organic matter in four years CM amended soil. (1)H and (13)C NMR spectroscopy were used to investigate the nature of the HA isolates from CM, control soil (S(4)) and amended soil. The result indicated a significant structural difference between CM HA and S(4) HA, and supported the presence of both HA fractions in soil at the end of the amendment trials. However, the nature and content of CM HA in soil did not fully explain the increase of soil cation exchange capacity (CEC) after amendment. All CM humic fractions (i.e., fulvic acid, humic acid and humin) were found to contribute to the change of the soil organic matter composition. It is concluded that although CM HA is a suitable indicator of the survival of compost organic matter in soil during amendment, all three humic fractions should be monitored and analyzed to fully understand changes in the composition and properties of amended soil.

Alkylation↗

PubMed2006

Isolation of the stable fraction (the core) of the humic acid.

Humic acid consists of a recalcitrant (unhydrolysed fraction) (the core) and labile (hydrolysable fraction) fraction. Core-humic acid (core-HA) isolation was performed by treating source material with apolar and polar solvents (organic solvents+acid hydrolysis) before alkaline extraction. Leonardite, soil Ah horizont and dry blood were chosen for this study because of their different origin and degree of humification. Chemical analysis (elemental analysis, total acidity, E(4):E(6)), spectroscopic analysis (DRIFT and (1)H NMR), and complete mass balance were used to investigate the effect of purifying humic acids. The results obtained showed that purification produced a slight modification of Leonardite humic acids as was expected for these highly humified organic matrices. On the other hand, about 500 g kg(-1) of soil humic acids were lost by purification. The fractions lost mainly consisted of carbohydrates. Dry blood showed the presence of humic acids that contrasted with its origin, thus indicating the limitations of the common analytical methods used for HA extraction. Nevertheless, in practice, purification caused the complete disappearance (914 g kg(-1) of HA was lost) of these HAs. The results obtained in this work suggest that the HA fraction isolated (named core-HA) effectively represents the HA structure proposed by the existing literature, since the purification proposed was able to eliminate the adsorbed organic molecules (interference materials) coating the HA structure.

Acids↗

PubMed2006

Bioremediation of soil contaminated with pentachlorophenol (PCP) using humic acids bound on zeolite.

We determined the toxicity of various chlorophenols, especially pentachlorophenol (PCP), on five bacterial strains and studied PCP biodegradation in soils amended with an organomineral complex (OMC) prepared from humic acids (organic part) bound on zeolite (inorganic part). Both components of OMC have excellent sorption properties and are of natural origin and therefore suitable to be used in the environment. Toxicity of chlorophenols depends not only on the number of chlorine atoms but also on their position on aromatic ring, and is thus regiospecific. Biodegradation of PCP was studied in three real completely characterized soil samples, Chernozem, Fluvisol, and Regosol, with and without the addition of OMC. The soils were sterilized and bioaugmented with the bacterial isolate Comamonas testosteroni CCM 7530. The immobilization effect of OMC in relation to PCP depends on the concentration of humic acids (HAs), the PCP concentration, and the content of organic carbon in soil. The microbial activity and the simulated action of acid rains led to the gradual release and biodegradation of the reversibly bound PCP without no initial toxic effect on indigenous or bioaugmented microorganisms. OMC appeared to be a good trap for PCP with potential applications in remediation technology because it reduces the potential toxicity of PCP to microbial community by lowering its bioavailability and thus facilitates its biodegradation.

Adsorption↗

PubMed2006

Evaluating the impacts of some environmentally relevant factors on the availability of bisphenol A with negligible-depletion SPME.

The effect of some environmentally relevant factors including salinity, pH, and humic acids on the availability of bisphenol A (BPA) was evaluated by using the negligible-depletion solid-phase microextraction (nd-SPME) biomimetic method. With the variation of salinity (0-500 mM NaCl) and pH (5.0-8.5) of aqueous solutions, the partition coefficients of BPA between the nd-SPME fiber and the aqueous solution varied in the range of logD=3.55-3.86, which indicates that the salinity and pH can influence the availability of BPA. By using Acros humic acid as model dissolved organic matter (DOM), it was also demonstrated that the environmental factors such as salinity and pH could affect the partitioning of BPA between DOM and aqueous solutions. The determined partition coefficients of BPA between dissolved organic carbon (DOC) and aqueous solutions were in the range of logD(DOC)=4.03-5.60 for Acros humic acid solutions with 1-50 mg l(-1) DOC. The influence of salinity and pH on logD(DOC) was more significant at low concentration (0-5 mg l(-1)) of DOC.

Benzhydryl Compounds↗

PubMed2006

Effects of organic ligands on fractionation of rare earth elements (REEs) in hydroponic plants: an application to the determination of binding capacities by humic acid for modeling.

Previous studies have revealed the fractionation processes of rare earth elements (REEs) in hydroponic plants, with a heavy REE (HREE, the elements from Gd to Lu) enrichment in leaves. In this study, effects on the HREE enrichment in soybean leaves with additions of carboxylic acids (acetate, malate, citrate, NTA, EDTA and DTPA) and two soil humic acids (HAs) were investigated. REE speciation in carboxylic acid and HA solutions was simulated using Visual MINTEQ and Model V, respectively. The results showed that the effects caused by carboxylic acids were strongly dependent on the differences between their binding strengths for light REEs (LREEs, the elements from La to Eu) and those for HREEs. A good correlation existed between these effects and the changes of free REE ions in solutions. This relationship was also observed for the HA treatments, provided that the intrinsic equilibrium constants of REEs for cation-proton exchange with HA (i.e., pK(MHA)) in Model V were estimated using a free-energy relationship with the stability constants for REE complexation with lactic acid. It is suggested that this set of pK(MHA) values is more suitable for use in Model V for the simulation of REE complexation with HA.

Humic Substances↗

PubMed2006

Complexation of the antibiotic tetracycline with humic acid.

The effect of solution chemistry and sorbate-to-sorbent ratio on the interaction of the antibiotic tetracycline with Elliott soil humic acid (ESHA) was investigated using equilibrium dialysis and FITEQL modeling. Tetracycline speciation strongly influenced its sorption to ESHA. Sorption was strongly pH-dependent with a maximum around pH 4.3, and competition with H+ and electrolyte cation (Na+) was evident. The pH-dependent trend was consistent with complexation between the cationic/zwitterionic tetracycline species and deprotonated sites in ESHA (mainly carboxylic functional groups). Modification of ESHA by Ca2+ addition increased tetracycline sorption suggesting that ternary complex formation (ESHA-metal-tetracycline) may be important at higher concentrations of multivalent metal cations. The macroscopic data (pH-envelope and sorption isotherms) were successfully modeled using a discrete logK function with the FITEQL 4.0 chemical equilibrium program indicating that ESHA-tetracycline interaction could be reasonably represented as complex formation of a monoacid with discrete sites in humic acid. Sorption-desorption hysteresis was observed; both sorption and desorption isotherms were well described by the Freundlich equation.

Adsorption↗

PubMed2006

Changes in the chemical composition of water-extractable organic matter during composting: distribution between stable and labile organic matter pools.

Aerobic decomposition and stabilization of organic matter during the composting of waste materials is primarily due to the biochemical transformation of water-soluble compounds in the liquid phase by the microbial biomass. For this reason water-soluble organic matter represents the most active fraction of compost, both biologically and chemically, and thus should directly reflect the biochemical alteration of organic matter. This work aims to elucidate the microbial-mediated processes responsible for the distribution of soluble organic matter between stable and labile pools with composting time. Accordingly, chemical analysis as well as UV absorption, and 1H and 13C-NMR spectroscopy of samples collected during the industrial composting of urban waste revealed microbial induced transformation of water-extractable organic matter over time. The chemical composition changed from labile, hydrophilic, plant-derived organic compounds in the beginning to predominately stable, hydrophobic moieties comprising lignin-derived phenols and microbially-derived carbohydrates at later stages of composting.

Carbon Isotopes↗

PubMed2006

Evaluation of the leachability of polychlorinated dibenzo-p-dioxins and dibenzofurans in raw and solidified air pollution control residues from municipal waste incinerators.

Leachability of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from raw and solidified air pollution control (APC) residues with selected solvents, including acetic acid, simulated acid rain, humic acid, linear alkylbenzene sulfonate (LAS) and n-hexane was investigated. High-chlorinated PCDD/F congeners were observed in all leachates of raw APC residue samples, with the largest total leaching concentration (61.60 ngm(-3); 0.30 ngI-TEQm(-3)) from treatment with humic acid. Low-chlorinated congeners were mainly leached with LAS and n-hexane. Solidification and stabilization (S/S) processes with cement and sulfur-containing chelating agent decreased the leachability of PCDD/Fs by up to 98% with humic acid and LAS as solvents. However, S/S processes enhanced the leachability of both high- and low-chlorinated PCDD/F congeners with n-hexane as the solvent, which largely increased the toxic equivalent quantity of leachates. These results suggest that conventional S/S processes may effectively restrain the release of PCDD/Fs when APC residues are leached with rain water or natural organic compounds (e.g., humic acid), but may have a deteriorated effect when APC residues are leached with nonpolar organic solvents (e.g., n-hexane) coexisting in the landfill sites.

Air Pollutants, Occupational↗

PubMed2006

Distribution of PAHs and PCBs to dissolved organic matter: high distribution coefficients with consequences for environmental fate modeling.

Dissolved organic carbon/water distribution coefficients (K(DOC)) were measured for a selection of PCBs with octanol/water partition coefficients (K(OW)) ranging from 10(5.6) to 10(7.5). A solid phase dosing and sampling technique was applied to determine K(DOC) to Aldrich humic acid. This technique is in particular suitable for determining the distribution of very hydrophobic chemicals to complex matrices like humic acids. The K(DOC) values were calculated from the experimental data using a linear model. Determined K(DOC)'s were evaluated in relation to octanol/water partition coefficients of the test compounds, and compared to literature data. Measured K(DOC) values were somewhat higher than literature data, which can probably be attributed to the overestimation of freely dissolved aqueous concentration as a result of incomplete phase separation in other studies, and to the unique character of Aldrich humic acid as a "sorbent" or co-solute or to the fact that Aldrich humic acid is not a typical DOC, and other (adsorption) processes can occur. This study reports DOC distribution coefficients that belong to the highest ones ever measured. In addition, the DOC distribution was discussed in relation to current risk assessment modeling.

1-Octanol↗

PubMed2003

Influence of ionic strength and organic modifier concentrations on characterization of aquatic fulvic and humic acids by high-performance size-exclusion chromatography.

Aquatic fulvic acid (FA) and humic acid (HA) were characterized by an aqueous high-performance size-exclusion chromatography (HPSEC) using a hydrophilic polymeric stationary phase and an aqueous eluent at neutral pH and low-ionic strength (5 mM Na2HPO4; final ionic strength, 13 mM). Employed HPSEC showed low sensitivity of FA to variations in ionic strength (13 and 100 mM) and contents of organic modifier (0.1 or 40% methanol) in aqueous eluent. Under these analytical conditions, peak maxima of relative UV signals versus molecular mass (Mr) defined as M'p and peak maxima of relative mass concentrations versus Mr defined as Mp of FA were shown to be located at 548-690 and 500, respectively. Organic modifier concentrations of 40% methanol in aqueous eluent enabled not only analysis of FA, but also analysis of some aquatic HA by HPSEC. Analysis showed M'p and Mp values of aquatic HAs around 1000 and 600, respectively. Measured molecular mass data of FA were found to be consistent with the recently published data describing low molecular masses of FA. Results recommend the use of the described HPSEC as a simple, rapid, reproducible, low-cost method giving consistent molecular sizes/masses of FA and some aquatic HAs.

Benzopyrans↗

PubMed2004

Advanced mesoporous organosilica material containing microporous beta-cyclodextrins for the removal of humic acid from water.

A new mesoporous organosilica material (beta-CD-Silica-4%) containing microporous beta-cyclodextrins (beta-CDs) has been prepared by the co-polymerization of a silylated beta-CD monomer with tetraethoxysilane in the presence of a structure-directing template, cetyltrimethylammonium bromide. Solid-state 13C and 29Si NMR studies provided evidence for the presence of covalently attached beta-CDs in the mesoporous material. Nitrogen adsorption experiments showed that beta-CD-Silica-4% material had a BET surface area of 460 m2/g and an average mesopore diameter of 2.52 nm. Small-angle powder X-ray diffraction pattern of beta-CD-Silica-4% material revealed the lack of highly ordered mesoporous structure. Adsorption experiments showed that beta-CD-Silica-4% material removed up to 99% of humic acid from an aqueous solution containing 50 ppm of humic acid at a solution-to-solid ratio of 100 ml/g.

Adsorption↗

PubMed2004

Electrophoretic aggregation of humic acid.

Capillary electrophoresis (CE) has been used to characterize humic acid (HA) aggregation. It was found that when pumping HA solution through the capillary at a constant flow rate with no electric field, the number of spikes could be reduced by filtration of the solution. Applying high voltage (30 kV), the amount of spikes increased again. This is associated with the formation of new aggregates caused by electric field. Aggregation is influenced by the concentration of HA, applied voltage and presence of imidazole in the solution. It is supposed that this phenomenon is characteristic of all solutions that can form colloidal particles: in beta-cyclodextrin solution, similar spikes appear in a high-voltage electric field.

Electrophoresis, Capillary↗

PubMed2004

Application of internal quality control to the analysis of quaternary ammonium compounds in surface and groundwater from Andalusia (Spain) by liquid chromatography with mass spectrometry.

A method has been developed for the simultaneous determination of paraquat (PQ), deiquat (DQ), chlormequat (CQ) and mepiquat (MQ) in water samples by liquid chromatography (LC) coupled with electrospray ionization mass spectrometry (MS). The LC separations of the target compounds, as well as their MS parameters, were optimized in order to improve selectivity and sensitivity. Separation was carried out in a Xterra C8 column, using as mobile phase methanol-heptafluorobutyric acid (HFBA) in isocratic mode. The molecular ion was selected for the quantitation in selected ion monitoring (SIM) mode. Off-line solid-phase extraction (SPE) was applied with silica cartridges in order to preconcentrate the compounds from waters. Detection limits were in the range 0.02-0.40 microg l(-1). Recovery range varied between 89 and 99.5% with precision values lower than 6%. The method has been applied successfully to the analysis of both surface and groundwater samples from agricultural areas of Andalusia (Spain), using well defined internal quality control (IQC) criteria. The results revealed the presence of deiquat and paraquat in some samples.

Chromatography, High Pressure Liquid↗

PubMed2004

Sensitive trace enrichment of environmental andiandrogen vinclozolin from natural waters and sediment samples using hollow-fiber liquid-phase microextraction.

The presence of vinclozolin in the environment as far as the endocrine disruption effects in biota are concerned has raised interest in the environmental fate of this compound. In this respect, the present study attempts to investigate the feasibility of applying a novel quantitative method, liquid-phase microextraction (LPME), so as to determine this environmental andiandrogen in environmental samples such as water and sediment samples. The technique involved the use of a small amount (3 microL) of organic solvent impregnated in a hollow fiber membrane, which was attached to the needle of a conventional GC syringe. The extracted samples were analyzed by gas chromatography coupled with electron-capture detection. Experimental LPME conditions such as extraction solvent, stirring rate, content of NaCl and pH were tested. Once LPME was optimized, the performance of the proposed technique was evaluated for the determination of vinclozolin in different types of natural water samples. The recovery of spiked water samples was from 80 to 99%. The procedure was adequate for quantification of vinclozolin in waters at levels of 0.010 to 50 microg/L (r> 0.994) with a detection limit of 0.001 microg/L (S/N= 3). Natural sediment samples from the Aliakmonas River area (Macedonia, Greece) spiked with the target andiandrogen compound were liquid-liquid extracted and analyzed by the methodology developed in this work. No significant interferences from the samples matrix were noticed, indicating that the reported methodology is an innovative tactic for sample preparation in sediment analysis, with a considerable improvement in the achieved detection limits. The results demonstrated that apart from analyte enrichment, the proposed LPME procedure also serves as clean-up method and could be successfully performed to determine trace amounts of vinclozolin in water and sediment samples.

Androgen Antagonists↗

PubMed2006

Determination of trace levels of dinitrophenolic compounds in environmental water samples using hollow fiber supported liquid membrane extraction and high performance liquid chromatography.

A hollow fiber supported liquid membrane extraction method for the liquid chromatographic determination of dinitrophenolic compounds at ppt levels has been developed. Different variables affecting the extraction process, such as extraction time, shaking speed, acceptor pH, acceptor buffer concentration, salt content and humic acids have been studied. Enrichment factors up to 7000 times were obtained. Validation of the method included calibration experiments and studies of the linearity of the responses in different matrices. Good linearity was obtained in the environmental matrices evaluated. Detection limits range from 6.0 to 8.0 ng/L, and the relative standard deviations do not exceed 7% in terms of repeatability.

Chemical Fractionation↗

PubMed2006

On-fibre solid-phase microextraction coupled to conventional liquid chromatography versus in-tube solid-phase microextraction coupled to capillary liquid chromatography for the screening analysis of triazines in water samples.

This paper compares the advantages and disadvantages of two different configurations for the extraction of triazines from water samples: (1) on-fibre solid-phase microextraction (SPME) coupled to conventional liquid chromatography (LC); and (2) in-tube SPME coupled to capillary LC. In-tube SPME has been effected either with a packed column or with an open capillary column. A critical evaluation of the main parameters affecting the performance of each method has been carried out in order to select the most suitable approach according to the requirements of the analysis. In the on-fibre SPME configuration the fibre coating was polydimethylsiloxane (PDMS)-divinylbenzene (DVB). The limits of detection (LODs) obtained with this approach under the optimized extraction and desorption conditions were between 25 and 125 microg/L. The in-tube SPME approach with a C18 packed column (35 mm x 0.5 mm I.D., 5 microm particle size) connected to a switching micro-valve provided the best sensitivity; under such configuration the LODs were between 0.025 and 0.5 microg/L. The in-tube SPME approach with an open capillary column coated with PDMS (30 cm x 0.25 mm I.D., 0.25 microm of thickness coating) connected to the injection valve provided LODs between 0.1 and 0.5 microg/L. In all configurations UV detection at 230 nm was used. Atrazine, simazine, propazine, ametryn, prometryn and terbutryn were selected as model compounds.

Chromatography, Liquid↗

PubMed2006

Isolation and seasonal effects on characteristics of fulvic acid isolated from an Australian floodplain river and billabong.

Fulvic acids from an Australian floodplain river and billabong were isolated using DEAE and DAX-8 resins, and characterised with the use of size exclusion chromatography and solid-state CP-MAS (13)C NMR spectroscopy. Differences between the two resin isolates were evident. Fulvic acids isolated using DEAE-cellulose had higher apparent M(n) and M(w) values, while the DAX-8 resin showed a slight preference for aliphatic components. Fulvic acids from the river and billabong had the same functional groups present, however, the river fulvic acids had higher apparent M(n) (number average molecular weight) and M(w) values (weight average molecular weight), and were more polydisperse than the billabong fulvic acid. There were no significant changes in the characteristics of the fulvic acid isolated from the river at four sampling times: summer, autumn, winter and spring. In contrast, fulvic acids isolated from a billabong displayed seasonal variation in molecular weights. This work emphasizes the importance in ecological studies of isolation procedure for the operationally defined fulvic acids.

Australia↗

PubMed2006

Determination of pesticides in water by cone-shaped membrane protected liquid phase microextraction prior to micro-liquid chromatography.

A new sample pre-treatment technique termed cone-shaped membrane liquid phase microextraction (CSM-LPME) was developed and combined with micro-liquid chromatography (micro-LC) for the determination of selected pesticides in water samples. Four pesticides (hexaconazole, procymidone, quinalphos and vinclozolin) were considered as target analytes. Several important extraction parameters such as types of extraction solvent, agitation rate, pH value, total exposure time and effect of salt and humic acids were optimized. Enrichment factors of > 50 folds were easily achieved within 20 min of extraction. The analytical data demonstrated relative standard deviations for the reproducibility of the optimized CSM-LPME method ranging from 6.3 to 7.5%. The correlation coefficients of the calibration curves were at least 0.9995 across a concentration range of 2-100 microg/L. The detection limits for all the analytes were found to be in the range of 1.1-1.9 microg/L.

Analytic Sample Preparation Methods↗