PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Dentin”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58Linked to original sources

Micromorphological spectrum from overdrying to overwetting acid-conditioned dentin in water-free acetone-based, single-bottle primer/adhesives.

OBJECTIVES: The goal of this study was to illustrate and define the micromorphological spectrum which exists at the resin-dentin interface when two water-free, acetone-based, single-bottle primer/adhesive systems (One-Step, Bisco, and Prime & Bond, Dentsply/L.D. Caulk) were applied to acid-conditioned dentin under different dry and wet bonding conditions. METHODS: Forty-eight 1 mm dentin discs were each conditioned with 10% phosphoric acid and rinsed for 20 s. They were randomly divided into 4 groups based upon the status of the remaining surface moisture; Group I (30 s dry); Group II (3 s dry); Group III (blot dry) and Group IV (overwet). Bonded dentin disc pairs were then demineralized in EDTA and embedded in epoxy resin for transmission electron microscopic examination. RESULTS: The micromorphological spectra of the two bonding systems were essentially similar. Both were effected by even mild desiccation (3 s), resulting in incomplete intertubular resin infiltration. Optimal intertubular resin infiltration was achieved when the collagen network was kept moist and appeared relatively unaffected by the presence of excess surface moisture. On the other hand, intratubular resin infiltration was severely compromised in the presence of excess water within the dentinal tubules and at their openings in the dentin surface. The continuity of the resin layer deteriorated; blister-like spaces formed on the dentin surface and resin globules were found around the tubular orifices and on the surface of the hybrid layer. In addition, a complex phase separation pattern was observed in Prime & Bond that was characterized by phase inversion in the presence of surface moisture. SIGNIFICANCE: The "window of opportunity" for optimal interfacial integrity for both water-free systems appeared to depend upon keeping the demineralized collagen network moist, coupled with the complete evaporation of excess and "displaced" water from tissues prior to light-curing the prime/adhesives.

Acetone↗

Effect of phosphoric acid concentration on wet-bonding to etched dentin.

OBJECTIVE: This study was conducted to investigate the influence of phosphoric acid (H3PO44) demineralization of dentin during smear layer removal prior to dentin bonding. METHODS: Bovine dentin was pre-treated with either 10 wt% or 35 wt% phosphoric acid for 30 s. Substrates were then rinsed and either kept moist or air-dried before a light-cured bonding system was applied. The adhesive system consisted of a 5 wt% 4-methacryloyloxyethyl trimellitate anhydride (4-META) in acetone primer, and a photocured bonding agent, 4-META/triethylene glycol dimethacrylate-camphorquinone/N-phenylglycine (4-META/TEGDMA-CQ/NPG). Tensile bond strengths of bonded specimens were measured, and specimens were examined with a scanning electron microscope (SEM). Data obtained were subjected to two-way ANOVA and Duncan's New Multiple Range test to examine statistically significant differences (p < 0.05). RESULTS: Improved tensile bond strengths were measured when the 4-META/acetone primer was applied to wet dentin that had been etched with 10 wt% H3PO4 compared with similarly etched but dry dentin samples. However, when the dentin was etched with 35 wt% H3PO4, there was no significant difference in tensile bond strength between wet and dry specimens. SEM examination of the fractured surfaces revealed a number of cohesive failures in the demineralized dentin. Microscopic examination of cross sections of these surfaces indicated that resin impregnation was inadequate and that the hybrid layers in the cohesively fractured specimens were defective. SIGNIFICANCE: Phenomena observed in this investigation suggest that the channels between the H3PO4-denatured collagen fibers were difficult to preserve, so adhesive monomer impregnation of these substrates was impaired in a considerable number of test specimens.

Acid Etching, Dental↗

Influence of self-etching primer treatment on the adhesion of resin composite to polished dentin and enamel.

OBJECTIVE: This study investigated the effectiveness of the self-etching primer treatment on the adhesion of resin composite to both dentin and enamel. METHODS: Two types of self-etching primer were prepared. One was an aqueous solution of 2-methacryloyloxyethyl phenyl hydrogen phosphate (Phenyl-P) and 2-hydroxyethyl methacrylate (HEMA), and the other was an aqueous solution of 10-methacryloxydecyl dihydrogen phosphate (MDP) and HEMA. Influence of the concentration of Phenyl-P and MDP, and that of the application time on the adhesiveness were examined by measuring the tensile bond strengths of resin composite to dentin and enamel. The data were analyzed using the analysis of variance and Scheffe's test for multiple comparison among the means. RESULTS: After the 20P and 30P treatment for 30 s, bond strengths to dentin were significantly higher than those after 5P and 10P treatment for 30 s. The 30M treatment of dentin for 15 s significantly increased the bond strength compared with 5P, 10P and 20P for 15 s. In enamel, bond strength with 30P for 60 s was significantly higher than with 5P for 60 s and 30P for 15 s. The 30M for 60 s resulted in significantly higher bond strength than for 15 s. The smear layers on the dentin and enamel were partially dissolved by the self-etching primer treatment. A hybrid layer with a thickness of 1-1.5 microns was formed in dentin-bonded specimens. SIGNIFICANCE: The self-etching primer containing Phenyl-P or MDP showed good adhesion to dentin and enamel, and this primer is a promising material for resin composite restoration.

Acid Etching, Dental↗

Effect of conditioners on dentin permeability using an impedance method.

OBJECTIVES: The aim of our in vitro study was to contribute to an elaboration of a protocol to evaluate the permeability of dentin and the effect of different acid conditioners by means of the electrochemical impedance technique. MATERIALS AND METHODS: Twenty-four 1.1mm thick dentin disks were embedded in a hollow polyurethane resin cylinder. The system used was a 'like' permeation cell: two electrodes immersed in a 10(-1) KCl solution were attached to a potentiostat. It was connected to a microcomputer controlled frequency response analyzer and a 10 mV sinusoidal voltage signal over a frequency range of 1 Hz to 65 kHz was applied between the electrodes. The current passing through the dentin was measured to enable a calculation of impedance expressed in a complex number. To establish an evaluation of permeability variation, the resistance was noted for all specimens before and after the application of dentin conditioners. RESULTS: The highest resistance decrease was obtained with 32% phosphoric acid and 10-3 solution which improved the permeability, respectively, 9.0 and 6.9% with no significant difference. The acidic monomer can be considered as intermediate (4.3%) between 10-3 solution and the polyacrylic acid (2.8%) with no significant difference. CONCLUSIONS: By measuring electrical resistance of dentin disks with the impedance method, we can evaluate the ionic conduction through the sample and achieve quantitative values about permeability. The action of dentin conditioners can be significantly evaluated regarding their action in terms of resistance of the etched zone (REZ) and increasing dentin permeability.

Acid Etching, Dental↗

Enamel and dentine shear bond strength of two resin modified glass ionomers and two resin based adhesives.

OBJECTIVES: The purpose of this in vitro study was to compare the shear bond strength to enamel and dentine of two resin modified glass ionomers (Fuji Bond L.C. and Vitrebond) and two resin based adhesives (Prime&Bond 2.1 and Scotchbond Multi-Purpose). METHODS: A total of 120 bond sites were prepared on either enamel (n = 60) or dentine (n = 60) on human molars by grinding the teeth flat with a 600 grit sandpaper. Each tooth substrate group was divided into four groups (n = 15) to match each material. Each of the four material systems was applied, according to the manufacturers instructions, to the bond sites. On top of the placed material, a microfilled composite was placed in a 2.5 mm diameter matrix and light-cured for 40 s. All specimens were thermocycled 500 times (5-55 degrees C). Shear bond strength values were determined 120 h after bonding using a Zwick testing machine. One-way ANOVA was used to determine whether significant differences (p < 0.05) existed among the material groups on enamel and dentine. Pairwise comparisons were used to determine significant differences (p < 0.05) among the four products. RESULTS: The ANOVA revealed strong significant differences on enamel (p = 0.0001) and dentine (p = 0.0172). The enamel bond strength values of the two resin based adhesives were significantly higher than one of the resin modified glass ionomers (Vitrebond), while the other resin modified glass ionomers did not differ from Scotchbond Multi-Purpose. On dentine, however, Vitrebond performed significantly better than the two resin based adhesives. CONCLUSIONS: The investigated resin modified glass ionomers bonded better to dentine surfaces than to enamel surfaces, while the investigated resin based adhesive systems bonded better to enamel than to dentine.

Adhesives↗

The surface effects of erosion and abrasion on dentine with and without a protective layer.

OBJECTIVE: The aim of this in situ study was to investigate with four imaging modalities whether covering dentine with adhesive resins could protect against erosion from acids. The objectives were to observe and quantify the effects of acids and the soft tissues, especially the tongue, on dentine and the bonding agents using four assessment techniques: qualitative assessment with SEM, surface roughness and thickness of resin with the TSM and volume loss with the laser profilometer. DESIGN: An in situ investigation using extracted dentine sections embedded in splints held on the palate of 10 volunteers. The dentine sections were protected by two resins and subjected to a tooth wear regime. RESULTS: Both Seal and Protect and Opitbond Solo protected the tooth surfaces from a tooth wear regime. There were no statistical differences between the control surfaces and those protected with dentine bonding agents for resin thickness, roughness and profilometry. The appearance of the slabs under both confocal and SEM showed that the material remained in place despite a vigorous wear regime and therefore protected the tooth surface. CONCLUSIONS: For patients with uncontrolled erosion or tooth wear, applying a dentine bonding agent to exposed dentine is a practical option to prevent further damage.

Adult↗

Effect of eugenol-containing sealer on marginal adaptation of dentine-bonded resin fillings.

AIM: Eugenol is claimed to interfere with the polymerization of composite resins and to affect shear bond strengths of dentine-bonded composite restorations. Eugenol-based sealers are used during root canal treatment in teeth that may require build-ups or extensive restorations. Unfortunately, the adverse effect of eugenol has mostly been assessed in shear bond tests and this variable may be clinically inappropriate. The current study evaluate the effect of eugenol in a eugenol-based endodontic sealer on marginal adaptation of composite resin restorations with and without thermo-mechanical stress. METHODOLOGY: Thirty Class V cavities with half of the cavity margins in dentine and half of the cavity margins in enamel were prepared in extracted human premolars and then divided into 5 groups. Teeth in group 1 were not contaminated with eugenol. Cavities in groups 2-4 were contaminated with a eugenol-based sealer (Tubli-Seal, Kerr) and cleaned with: (i) sandblasting, (ii) bur finishing alone or (iii) bur finishing combined with swabbing with alcohol. These 4 groups were temporized for 6 weeks (Ketac, ESPE), whilst group 5 received no eugenol, was not temporized and acted as the control. Cavities were restored with Tetric Ceram using Syntac Classic (Vivadent) as a dentine-bonding agent. The specimens were then thermo-mechanically stressed. The percentages of marginal adaptation in dentinal and enamel margins were assessed in a SEM at x200 magnification before and after stress using a replica method. Mean percentages of marginal adaptation were calculated and compared using a two way-ANOVA (influence of eugenol and cleaning procedure) and non-parametric tests. RESULTS: Marginal adaptation in enamel exceeded 95% and 92% in all specimens before and after thermo-mechanical stress, respectively. Before stress, marginal adaptation in dentine ranged from 92.3 +/- 7.9% to 95.7 +/- 6.2% in groups 1-5. After stress, the percentage of marginal adaptation in dentine decreased significantly overall (P < 0.05, range 39.8 +/- 21.1% to 82.9 +/- 13.7%). The effect of contamination with eugenol was not significant (P > 0.05): in contrast, there was a significantly beneficial effect when the entire cavity was finished with burs (P < 0.01). CONCLUSIONS: Under the conditions of this study, the eugenol containing sealer did not significantly impair marginal adaptation in dentinal margins of mixed Class V restorations when bur finishing was employed before placement. However, no other cleaning method was sufficient to produce acceptable figures of marginal adaptation.

Analysis of Variance↗

Permeability of dentine after Nd:YAG laser treatment: an in vitro study.

The purpose of this investigation was to determine the effects of Nd:YAG laser treatment on the permeability of dentine. Forty dentine discs were prepared by horizontal sectioning through the middle coronal third of freshly extracted non-carious third molars. After the removal of the pulp the discs were finished with 600 grit and divided into three test groups and one control group (n = 10). For the test group three different laser power settings were chosen: test group A: 3 x 60 sec, 60 mJ; test group B: 3 x 60 sec, 90 mJ; test group C: 3 x 60 sec, 120 mJ. No laser treatment was performed on the control group. In a two-chamber system the filtration rate of dentine tubules from an exactly defined area of the specimens was measured using a radioactive Ringer solution under a pressure of 30 cm H2O. Permeability measurements were carried out three times prior to lasing, three times immediately following laser treatment and six times after the application of phosphoric acid. Analysis of variance showed a significant influence of the Nd:YAG laser treatment on the permeability of dentine (P < 0.001). The mean quotient of non-treated control vs. lased dentine was 2.19 +/- 0.86 for the 60 mJ beam, 1.49 +/- 0.88 for the 90 mJ beam, and 2.04 +/- 2.17 for the 120 mJ beam. Etching the lased surfaces had a statistically significant influence on the permeability of the dentine only in the 60 mJ group (P < 0.001). The data show that the Nd:YAG laser treatment often increases the permeability of smear layer covered dentine but moderates the increase of permeability after etching the surface with phosphoric acid.

Acid Etching, Dental↗

Morphological interface between hybrid ionomers and dentin with and without smear-layer removal.

To evaluate the micromorphological interface between dentin and several hybrid ionomer restoratives, a flat dentin surface was obtained on the occlusal surfaces of extracted human molar teeth after sectioning the enamel with an Isomet saw. Three poly-acid-modified composite resins, Compoglass, Dyract and F2000, and two resin-modified glass-ionomer cements, Fuji II LC and Photac-Fil were applied to the dentin surface. A second section, 2 mm apical from the first one, was made to produce a dentin segment containing the tested materials. Each disc was then split fractured along the dentin/material interface. For the poly-acid-modified composites, one half of the disc was stored in 6 mol/L HCl for 48 h to remove the dentin. The other was gently decalcified and deprotenized at the interface between the hybrid ionomer and the dentin. Both halves were then sputtered with gold and examined using SEM. For resin-modified glass-ionomer, samples were only evaluated at the interface. The three poly-acid-modified composite resins showed the formation of hybrid layers and resin tags at the interface to the dentin. Removal of the smear layer significantly improves hybridization of these materials. Also, Fuji II LC produced a hybrid layer while the Photac-Fil showed no evidence of hybridization.

Compomers↗

Laminin alpha2 is essential for odontoblast differentiation regulating dentin sialoprotein expression.

Laminin alpha2 is subunit of laminin-2 (alpha2beta1gamma1), which is a major component of the muscle basement membrane. Although the laminin alpha2 chain is expressed in the early stage of dental mesenchyme development and localized in the tooth germ basement membrane, its expression pattern in the late stage of tooth germ development and molecular roles are not clearly understood. We analyzed the role of laminin alpha2 in tooth development by using targeted mice with a disrupted lama2 gene. Laminin alpha2 is expressed in dental mesenchymal cells, especially in odontoblasts and during the maturation stage of ameloblasts, but not in the pre-secretory or secretory stages of ameloblasts. Lama2 mutant mice have thin dentin and a widely opened dentinal tube, as compared with wild-type and heterozygote mice, which is similar to the phenotype of dentinogenesis imperfecta. During dentin formation, the expression of dentin sialoprotein, a marker of odontoblast differentiation, was found to be decreased in odontoblasts from mutant mice. Furthermore, in primary cultures of dental mesenchymal cells, dentin matrix protein, and dentin sialophosphoprotein, mRNA expression was increased in laminin-2 coated dishes but not in those coated with other matrices, fibronectin, or type I collagen. Our results suggest that laminin alpha2 is essential for odontoblast differentiation and regulates the expression of dentin matrix proteins.

Animals↗

Effects of multiple dentinal lesions on the rat pulp.

The purpose of this study was to compare the effects of single and multiple dentinal lesions on the dental pulps of rats. 3H-proline was used to measure pulpal reactionary dentin deposition, and 3H-thymidine was used to measure pulpal cell proliferation by radioautography. Data were compared by factorial analysis of variance and a post-hoc Tukey test. A significant increase in radiolabeled collagenous proteins within reactionary dentin and pulpal cell labeling indices were evident coincident to single dentinal injuries, compared with controls (p < 0.001). After double injuries, the radiolabeled collagenous proteins within reactionary dentin and the pulpal labeling indices remained significantly greater than in controls (p < 0.01); however, each was significantly less than after single injuries (p < 0.05). These data suggest that pulpal cell proliferation and collagenous protein deposition into reactionary dentin are decreased subsequent to a previous dentinal injury. Thus, the healing potential of the dental pulp could be decreased by recent tooth cavity preparation.

Analysis of Variance↗

Apical and coronal seal of roots obturated with a dentine bonding agent and resin.

The efficacy of sealing root canal systems with a dentine bonding agent and resin cement was compared with that of a glass ionomer sealer. Scanning electron microscopic examination of the bonding agent-dentine interface was also performed. The root canals of 50 single rooted teeth with mature apices were prepared chemomechanically and the smear layer removed with 17% REDTA and 5.25% NaOCl. Specimens were divided into two groups of 24 teeth each. One group had the dentine conditioned with a 10:3 citric acid-ferric chloride solution and obturated with the dentine bonding agent and resin, radiopaque C & B Metabond. The other group was obturated with the glass ionomer sealer, Ketac-Endo and a single cone of gutta-percha. After immersion in Indian ink for 90 h, the teeth were cleared and the quality of the apical and coronal seal was assessed using India ink dye penetration. There was a significantly better seal in both the apical and coronal directions when using the dentine bonding agent and resin obturation material. Scanning electron microscopic examination of the demineralized dentine and the C & B Metabond interface revealed the presence of the characteristic hybrid layer along with microtags of resin penetrating deep into the dentine tubules.

Boron Compounds↗

Effects of phosphoric acid and tannic acid on dentine collagen.

We examined the effects of phosphoric acid, the most common enamel etchant in composite resin therapy, on dentine collagen. Dentine collagen pretreated with 7M phosphoric acid was shown to be more susceptible to trypsin digestion than untreated collagen. This susceptibility increased with increasing duration of exposure to the acid. The results indicate that phosphoric acid induces a conformational change in dentine collagen (denaturation or perturbation) similar to that observed with 0.39 M HCl, which has a similar pH value (0.65). However, phosphoric acid-pretreated dentine collagen, when treated with tannic acid for 2 h, became as resistant to tryptic digestion as intact dentine collagen. The present results suggest that tannic acid may work as a dentine conditioner in composite resin therapy, in view of the fact that phosphoric acid etchant is applied, either deliberately or inadvertently, to dentine, and would thus induce denaturation or perturbation of collagen.

Animals↗

In vitro dentine permeability evaluation of HEMA-based (desensitizing) products using split-chamber model following in vivo application in the dog.

The aim of this study was to evaluate in vitro dentine permeability evaluation of 2-Hydroxyethyl methacrylate (HEMA)-based desensitizing products using split-chamber model following in vivo application in the dogs for three experimental time periods of 1 week, 1 month and 3 months. Buccal enamel of upper and lower canines of nine young dogs was removed and flat dentinal surface was obtained using a water-cooled diamond bur. The dentinal surface divided into four quarters, three experimental and a control. Health-Dent and Gluma Desensitizing agent and Single bond were applied to respective quarters of one tooth, according to manufacturers' instructions. The last quarters were left as control without any applications. For the each experimental period, 10 dentine samples from each group including control were used to measure the hydraulic conductance values. The dentine discs were placed pulp-side down in a split-chamber device in which the plastic spacers containing the rubber 0 rings have a surface area of 1 mm(2) and permeability was measured by fluid filtration. The data were expressed as hydraulic conductance (Lp). Differences in dentine permeability obtained for the desensitizing agents against the control were tested for statistical significance using Kruskal-Wallis one-way ANOVA and Bonferroni-adjusted Mann-Whitney U-tests. Differences in permeability in three time periods for each desensitizing agent were analysed using Friedman's anova and Wilcoxon signed rank tests. All desensitizing applications caused decreased Lp values compared with the control Lp value at the end of 1 week. In the 1-month samples, between the Lp values of Single bond and control, no statistical difference was found (P > 0.05). At the end of the 3-month period, the Gluma Desensitizing agent had the lowest the Lp value (P < 0.05). The result of this study is that the topical application of desensitizing agents led to decrease in dentine permeability in the dog model. The Gluma Desensitizing agent provide the more lasting tubule-occluding effect than the other material tested in this model.

Animals↗

The effect of eugenol-containing temporary cement on the bond strength of two resin composite core materials to dentin.

PURPOSE: This study investigated the effect of eugenol-containing temporary cement on the bond strength of two resin composite core materials (FluoroCore and Ti-Core) to dentin. MATERIALS AND METHODS: Dentin was exposed in three groups of extracted teeth (20 specimens each). In group one, dentin was covered with eugenol-containing temporary cement; the second group was covered with eugenol-free temporary cement; and the third group was left uncovered and served as a control group. All specimens were stored for 1 week at 37 degrees C and 100% humidity. The dentin surfaces were cleaned and treated using the GLUMA adhesive system, followed by placement of composite core build-ups. Debonding of the core material was accomplished using the Accuforce Elite test system. RESULTS: There was a significant reduction in bond strength for the specimens covered with eugenol temporary cement (p < .0001), but no significant difference was found between the control group and the group treated with eugenol-free temporary cement. Bond strength of the Ti-Core material to dentin was significantly higher than that of FluoroCore (p < .0001). CONCLUSION: Pretreatment of the dentin with eugenol-based temporary cement adversely affects the bond strength of resin composite core material to dentin.

Analysis of Variance↗

Histological distribution of phosphophoryn in normal and pathological human dentins.

Dentin phosphophoryn is a highly phosphorylated protein which has a hydrophilic character but is not soluble in dilute acetic acid. A histochemical method was developed for staining this protein with Stains-all in situ utilizing those chemical properties. We have succeeded in detecting the presence of this protein in circumpulpal orthodentin of human permanent and deciduous teeth, but not in mantle dentin, secondary dentin and reparative dentin. Phosphophoryn staining was also absent in the dentin of dentinogenesis imperfecta (DI) Type II, a genetic disorder of dentin formation. From these results, it is suggested that phosphophoryn is synthesized and secreted only by physiologically-differentiated odontoblasts and that the mineralization processes of mantle, secondary, reparative and DI dentins may be different from that of circumpulpal orthodentin.

Child↗

Activation of gelatinolytic/collagenolytic activity in dentin by self-etching adhesives.

Mild acids are known to activate dentin matrix metalloproteinase (MMPs). All self-etching dental adhesives are acidic (pH 1.5-2.7) and may activate dentin MMPs. The purpose of this study was to compare the ability of several all-in-one adhesives to activate gelatinolytic and collagenolytic activities in powdered mineralized dentin. Powdered dentin made from human teeth was mixed with all-in-one adhesives (Clearfil Tri-S Bond, G-Bond, Adper Prompt L-Pop) or a self-etching primer (Clearfil SE Bond primer) for varying times and then the reaction was stopped by extracting the adhesives using acetone. Fresh untreated mineralized dentin powder had a gelatinolytic activity of 3.31 +/- 0.39 relative fluorescent units (RFU) per mg dry weight (24 h) that increased, over storage time, to 87.5 RFU mg(-1) (24 h) after 6-8 wk. When fresh powder was treated with acidic Tri-S Bond, the gelatinolytic activity increased from 3.24 +/- 0.70 RFU mg(-1) to > 112.5 RFU mg(-1) (24 h) after 20 min and then remained unchanged. Monomers with lower pH values produced less activity. There was a significant, direct correlation between gelatinolytic activity and pH, with Tri-S giving the highest activity. Coating dentin powder with Tri-S resin prevented fluorescent substrates from gaining access to the enzyme, even though it activated the enzyme. In conclusion, self-etch adhesives may activate latent MMP and increase the activity to near-maximum levels and contribute to the degradation of resin-dentin bonds over time.

Adhesives↗

Evaluation of smear layers on serial sections of human dentin by means of electrochemical impedance measurements.

The alternating current impedance characteristics of a uni-directional porous glass membrane and serial sections of dentin from unerupted human third permanent molars (with and without smear layers) were measured. The membrane was equilibrated at 20 +/- 1 degrees C in a range of concentrations of unbuffered KCl, and the tooth sections were equilibrated in 0.1 mmol/L unbuffered KCl. Each section's impedance was measured for a 50-mV (rms) alternating potential difference applied over 1 Hz to 65 kHz. By means of complex non-linear least-squares regression analysis, the dc resistance of each specimen was determined. Scanning electron microscopy and subsequent image analysis enabled the cross-sectional area of the pores in the membrane and dentin tubule surface-openings to be measured. The results showed that the measured cross-sectional area of pores in the membrane was in good agreement with that calculated from the measured dc resistance and solution resistivity over the range of electrolyte concentrations. In dentin, the presence of smear layers on the cut surfaces increased the measured resistance. The resistance of the smear layer varied, suggesting that its thickness changed across the surface of the dentin. This was superimposed on regional variations in resistance of smear-free dentin which were found to be related to alterations in the number of tubules present and their cross-sectional area. The resistivities of the dentin tubule contents and smear layer material were generally lower than that of the hydrating electrolyte. It is postulated that this could be due to ions from partial dissolution of the mineral in the dentin.

Dentin↗