SEARCH · PubMed Health

Results for “Elastic Modulus”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources

PubMed2001

Elastic properties of Sierpinski-like carpets: finite-element-based simulation.

The elastic properties of two-dimensional continuous composites of fractal structures are studied with the set of Sierpinski-like carpets filled by voids or rigid inclusions. The effective elastic moduli of these carpets are calculated numerically using the finite-element and position-space renormalization group techniques. The fixed-point problem is analyzed by flow diagrams in the plane of the current Poisson ratios and coefficients of anisotropy of the composites. It is found that in the general case the effective elastic moduli asymptotically approach a power-law behavior. Moreover, the common exponent characterizes the scaling behavior of each component of the elastic modulus tensor of a definite carpet. The values of the scaling exponents and positions of the fixed points are shown to be independent of the elastic properties of the host and depend significantly on the fractal dimension of the composite.

Journal Article↗

PubMed1995

The Young's modulus of feather keratin

The flexural stiffness of the rachis varies along the length of a primary feather, between primaries and between species; the possible contribution of variations in the longitudinal Young's modulus of feather keratin to this was assessed. Tensile tests on compact keratin from eight species of birds belonging to different orders showed similar moduli (mean E=2.50 GPa) in all species apart from the grey heron (E=1.78 GPa). No significant differences were seen in the modulus of keratin from primaries 710 in any species. There was a systematic increase in the modulus distally along the length of the rachis from swan primary feathers. Dynamic bending tests on swan primary feather rachises also showed that the longitudinal elastic modulus increases with increasing frequency of bending over the range 0.110 Hz and decreases monotonically with increasing temperature over the range -50 to +50 °C. The position-, frequency- and temperature-dependent variations in the modulus are, however, relatively small. It is concluded that, in the species studied, the flexural stiffness of the whole rachis is principally controlled by its cross-sectional morphology rather than by the material properties of the keratin.

Journal Article↗

PubMedDate not supplied

Effect of diabetes mellitus on the material properties of the distal tibia.

This investigation evaluates the effects of diabetes on the mechanical properties of human bone, specifically, the tibia. Seven diabetic and seven nondiabetic human (male) cadaveric distal tibiae were used in this study. The average age of the diabetic cadaveric samples was 51 years (range, 46-61 years), and the average age of the nondiabetic cadaveric samples was 75 years (range, 67-85 years). Three-point bending tests for strength and stiffness were performed on a small sample of each distal tibia. Each specimen was loaded at a constant rate until failure. From the recorded curve of load versus displacement, the ultimate and yield strength of bone and the bending modulus of bone were calculated. The diabetic samples were generally weaker than the older, nondiabetic samples, but no statistically significant differences were found in the elastic modulus (P = .29), yield strength (P = .90), ultimate strength (P = .46), and fracture toughness (P = .78), leading to speculation that diabetes has an effect similar to that of aging on the musculoskeletal system.

Aged↗

PubMed1996

Analysis on decay rate of vibration following impact to human dry skull with and without mouthguards.

The modal analysis on vibration in the human dry skull with and without mouthguards was performed in order to clarify which elasticity modulus of the material and what form of the mouthguard are best. Nine different mouthguards were prepared for this study from three materials with different elasticity moduli amd three different forms: Soft MOLTENO (registered) mouthguards of long, middle, and short forms. Regular MOLENTO (registered) mouthguards of long, middle and short forms, and Hard MOLENTO(registered) mouthguards of long, middle and short forms. Thirty-five measurement points were established on the skull. The main measurement system was composed of a 512-D Vibration Generator, LV-1300 Laser-Doppler Vibrometer, CF-6400 FFT Analyzer, PC-9821Xn personal computer, and Vibrant PC modal analysis software. The decay rate was calculated to evaluate effectiveness of the absorption of vibration of the skull with and without mouthguards when stress was put on the skull. The results showed that he skull fitted with the long and middle mouthguards made of regular MOLTENO (registered) had a higher decay rate than the skull w the mouthguard, and that the material properties of the mouthguards influenced the absorption of the skull vibration more intensively that did the forms of the mouthguards.

Adult↗

PubMed1999

Surface-induced polymerization of actin.

Living cells contain a very large amount of membrane surface area, which potentially influences the direction, the kinetics, and the localization of biochemical reactions. This paper quantitatively evaluates the possibility that a lipid monolayer can adsorb actin from a nonpolymerizing solution, induce its polymerization, and form a 2D network of individual actin filaments, in conditions that forbid bulk polymerization. G- and F-actin solutions were studied beneath saturated Langmuir monolayers containing phosphatidylcholine (PC, neutral) and stearylamine (SA, a positively charged surfactant) at PC:SA = 3:1 molar ratio. Ellipsometry, tensiometry, shear elastic measurements, electron microscopy, and dark-field light microscopy were used to characterize the adsorption kinetics and the interfacial polymerization of actin. In all cases studied, actin follows a monoexponential reaction-limited adsorption with similar time constants (approximately 10(3) s). At a longer time scale the shear elasticity of the monomeric actin adsorbate increases only in the presence of lipids, to a 2D shear elastic modulus of mu approximately 30 mN/m, indicating the formation of a structure coupled to the monolayer. Electron microscopy shows the formation of a 2D network of actin filaments at the PC:SA surface, and several arguments strongly suggest that this network is indeed causing the observed elasticity. Adsorption of F-actin to PC:SA leads more quickly to a slightly more rigid interface with a modulus of mu approximately 50 mN/m.

Actins↗

PubMed1988

A hybrid approach to theoretical analysis of bovine pancreatic trypsin inhibitor.

A static analysis of bovine pancreatic trypsin inhibitor (BPTI) is presented based on a new discrete/continuum approach to modeling the dynamics of biomolecules. This hybrid method utilizes knowledge of the intramolecular potential and molecular configuration to generate a field of elastic modulus tensors. These tensors, which relate the local stress and strain for each atom in the biomolecule, can be used to judge the local rigidity as well as indicate regions of high stress. Comparing the tensor fields for an unrelaxed and a relaxed configuration, the microscopic structure of BPTI is found to be anisotropic and to have regions of stress even when it is relaxed in the potential field. However, when these fields are averaged over the whole protein or over individual residues the structure becomes more isotropic and the stressed regions vanish. Using these averaged tensors, we calculated bulk properties such as Young's modulus and the Lamé constants and they agreed with previously reported values.

Aprotinin↗

PubMed2004

Analysis of bending behavior of native and engineered auricular and costal cartilage.

A large-deflection elasticity model was used to describe the mechanical behavior of cartilaginous tissues during three-point bending tests. Force-deflection curves were measured for 20-mm long x 4-mm wide x approximately 1-mm thick strips of porcine auricular and costal cartilage. Using a least-squares method with elastic modulus in bending as the only adjustable parameter, data were fit to a model based on the von Karman theory for large deflection of plates. This model described the data well, with an average RMS error of 14.8% and an average R(2) value of 0.98. Using this method, the bending modulus of auricular cartilage (4.6 MPa) was found to be statistically lower (p < 0.05) than that of costal cartilage (7.1 MPa). Material features of the cartilage samples influenced the mechanical behavior, including the orientation of the perichondrium in auricular cartilage. These methods also were used to determine the elastic moduli of engineered cartilage samples produced by seeding chondrocytes into fibrin glue. The modulus of tissue-engineered constructs increased statistically with time (p < 0.05), but still were statistically lower than the moduli of the native tissue samples (p > 0.05), reaching only about a third of the values of native samples.

Animals↗

PubMed2006

Hydration and dynamic fatigue of dentin.

An experimental investigation on the dynamic fatigue response of dentin was conducted to examine the influence of stress rate on the strength and energy to fracture. Rectangular beams were prepared from the coronal dentin of bovine maxillary molars and subjected to four-point flexure to failure. The dentin beams were examined in the fully hydrated and dehydrated condition at stress rates (sigma) ranging from 0.01 to 100 MPa/s. Results for the hydrated dentin showed that the flexure strength, energy to fracture, and flexure modulus all increased with increasing stress rate; the flexure strength increased from 100 MPa ((sigma) = 0.01 MPa/s) to 250 MPa ((sigma) = 100 MPa/s). In contrast, the elastic modulus and strength of the dehydrated dentin decreased with increasing stress rate; the flexural strength of the dehydrated dentin deceased from 170 MPa ((sigma) = 0.01 MPa/s) to 100 MPa ((sigma) = 100 MPa/s). While the hydrated dentin behaved more like a brittle material at low stress rates, the strain to fracture was found to be nearly independent of (sigma). According to the experimental results, restorative conditions that cause development of static stresses within the tooth could promote a decrease in the damage tolerance of dentin.

Animals↗

PubMed1992

Novel acrylic resins for dental applications.

A heat-cured resin based on a copolymer of bis-phenol-A glycidyl methacrylate (bis-GMA) and tetrahydrofurfuryl methacrylate (THFM) was investigated. Workable pastes were made by adding 90/10 w/w bis-GMA/THFM copolymer powder to a 70/30 w/w monomer of the same composition. The organic filler content was 60-64% w/w. Young's modulus, flexural strength, impact strength, hardness, water absorption and desorption, linear thermal expansion, polymerization shrinkage and glass transition temperature were determined. The materials studied showed high elastic modulus, hardness and glass transition temperature. A relatively low linear thermal expansion was obtained but poor impact strength and low flexural strength, indicating brittleness. Acceptable values were obtained for water absorption.

Acrylic Resins↗

PubMed2005

An inhomogeneous and anisotropic constitutive model of human dentin.

Dentin constitutes the major part of human tooth. It is composed of a large number of tubules with both variational radii and radially parallel pattern. In addition, peritubular dentin surrounds each tubule lumen and has a higher elastic modulus than the matrix of dentin, i.e. intertubular dentin. Considering the above microstructural characteristics, a micromechanics model is used in this paper to evaluate the overall elastic properties of dentin. Five independent effective elastic parameters in transverse isotropic elasticity matrix can be expressed analytically by the material parameters of peri- and intertubular dentin and the volume fraction of tubules. To determine the effectivity of this theoretical model, a finite element (FE) model simulating a longitudinal tooth slice in moire fringe testing of Wang and Weiner (J. Biomech. 31 (1998) 135) was performed. Furthermore, the FE model was developed incorporate modeling of variation of tubule's diameter and softer characteristic of intertubular dentin near the dentin-enamel junction and around the pulp chamber. It turned out that the isoline figure of longitudinal displacement by FE calculation has very similar patterns to the moire fringe results. However, the FE results of displacement by traditional stress-strain models which regard dentin as a homogeneous and isotropic material show an obviously different strain distributions as compared to published moire fringes results. Thus the inhomogeneous and anisotropic model developed in this paper more accurately reflects the true physical nature of human dentin.

Anisotropy↗

PubMed2000

Drug-induced changes of cytoskeletal structure and mechanics in fibroblasts: an atomic force microscopy study.

The effect of various drugs affecting the integrity of different components of the cytoskeleton on the elasticity of two fibroblast cell lines was investigated by elasticity measurements with an atomic force microscope (AFM). Disaggregation of actin filaments always resulted in a distinct decrease in the cell's average elastic modulus indicating the crucial importance of the actin network for the mechanical stability of living cells. Disruption or chemical stabilization of microtubules did not affect cell elasticity. For the f-actin-disrupting drugs different mechanisms of drug action were observed. Cytochalasins B and D and Latrunculin A disassembled stress fibers. For Cytochalasin D this was accompanied by an aggregation of actin within the cytosol. Jasplakinolide disaggregated actin filaments but did not disassemble stress fibers. Fibrous structures found in AFM images and elasticity maps of fibroblasts could be identified as stress fibers by correlation of AFM data and fluorescence images.

3T3 Cells↗

PubMed2001

Bond strength of binary titanium alloys to porcelain.

The purpose of this study was to investigate the bond strength between porcelain and experimental cast titanium alloys. Eleven binary titanium alloys were examined: Ti-Cr (15, 20, 25 wt%), Ti-Pd (15, 20, 25 wt%), Ti-Ag (10, 15, 20 wt%), and Ti-Cu (5, 10 wt%). As controls, the bond strengths for commercially pure titanium (KS-50, Kobelco, Japan) and a high noble gold alloy (KIK, Ishifuku, Japan) were also examined. Castings were made using a centrifugal casting unit (Ticast Super R, Selec Co., Japan). Commercial porcelain for titanium (TITAN, Noritake, Japan) was applied to cast specimens. The bond strengths were evaluated using a three-point bend test according to ISO 9693. Since the elastic modulus value is needed to evaluate the bond strength, the modulus was measured for each alloy using a three-point bend test. Results were analyzed using one-way ANOVA/S-N-K test (alpha = 0.05). Although the elastic moduli of the Ti-Pd alloys were significantly lower than those of other alloys (p = 0.0001), there was a significant difference in bond strength only between the Ti-25Pd and Ti-15Ag alloys (p = 0.009). The strengths determined for all the experimental alloys ranged from 29.4 to 37.2MPa, which are above the minimum value required by the ISO specification (25 MPa).

Dental Alloys↗

PubMed1997

Calcification of medial elastic fibers and aortic elasticity.

We tested the hypothesis that a simple change in wall composition (medial calcium overload of elastic fibers) can decrease aortic elasticity. Calcium overload was produced by hypervitaminosis D plus nicotine (VDN) in the young rat. Two months later, measurement of central aortic mean blood pressure in the unanesthetized, unrestrained rat showed that the VDN rat suffered from isolated systolic hypertension but that mean blood pressure was normal. Wall thickness and internal diameter determined after in situ pressurized fixation were unchanged, as was calculated wall stress. Wall stiffness was estimated from (1) elastic modulus (determined with the Moens-Korteweg equation and values for aortic pulse wave velocity in the unanesthetized, unrestrained rat and arterial dimensions) and (2) isobaric elasticity (= slope relating pulse wave velocity to mean intraluminal pressure in the phenylephrine-infused, pithed rat preparation). Both increased after VDN, and both were significantly correlated to the wall content of calcium and the elastin-specific amino acids desmosine and isodesmosine. Left ventricular hypertrophy occurred in the VDN model, and left ventricular mass was related to isobaric elasticity. In conclusion, elastocalcinosis induces destruction of elastic fibers, which leads to arterial stiffness, and the latter may be involved in the development of left ventricular hypertrophy in a normotensive model.

Analysis of Variance↗

PubMed1996

Collagen fiber organization is related to mechanical properties and remodeling in equine bone. A comparison of two methods.

We studied birefringence as an indicator of collagen fiber orientation in the diaphysis of the equine third metacarpal bone. We had previously shown that tissue from the lateral cortex of this bone is stronger monotonically, but less fatigue resistant, than tissue from the medial and dorsal regions. To learn whether collagen fiber orientation might play a role in this regional specialization, we tested three hypotheses using the same specimens: (1) collagen fiber orientation is regionally dependent; (2) remodeling changes collagen fiber orientation; (3) longitudinal collagen fibers correlate positively with modulus and monotonic bending strength and negatively with flexural fatigue life. Beams (N = 36) cut parallel to the long axes of six pairs of bones had been tested to determine elastic modulus (N = 36), and fatigue life (N= 24) or monotonic strength (N = 12) in four-point bending. Subsequently, histologic cross-sections were prepared, and porosity, active remodeling and past remodeling were quantified. Birefringence was measured as an indicator of transverse collagen orientation using plane-polarized light (PPL), and again using circularly polarized light (CPL). The CPL measurement was less variable than the PPL measurement. Both birefringence measures indicated that collagen was more longitudinally oriented in the lateral cortex than in the other two cortices. Longitudinally disposed collagen correlated with greater modulus and monotonic strength, but did not correlate with fatigue life. Remodeling was associated with more transverse collagen. Neither measure of birefringence was significantly correlated with porosity. It was concluded that, in the equine cannon bone, longitudinal collage fiber orientation is regionally variable, contributes to increased modulus and strength but not fatigue life, and is reduced by osteonal remodeling.

Animals↗

PubMed1996

Fundamental limitations on the contrast-transfer efficiency in elastography: an analytic study.

Elastography is a new ultrasonic imaging technique introduced to produce images of the Young's modulus distribution of compliant tissue. This Young's modulus distribution is derived from the ultrasonically estimated longitudinal internal strains induced by an external compression of the tissue. The displayed two-dimensional images are called elastograms. Recently, contrast-transfer efficiency, defined as the ratio of elasticity contrast as measured from elastogram to the true contrast, was used to illustrate by simulation the fundamental limitation of elastography in displaying the elastic modulus contrast of soft inclusion in a hard background and vice versa. In this paper, using a classical analytic solution of the elasticity equations derived for an infinite medium subjected to a uniaxial compression, we confirm such earlier simulations results. For this purpose we derive an analytic expression predicting the observed contrast in elastograms.

Animals↗

PubMed1990

Osmotic compression and stiffness changes in relaxed skinned cardiac myocytes in PVP-40 and dextran T-500.

Sarcomere lengths, cell widths, indices of stiffness, and striation pattern uniformity were determined from radially compressed isolated adult cardiac myocytes from the rat. Single cells were bathed in a series of relaxing solutions containing 0-15% concentrations of nonpenetrating long chain polymers PVP-40 and dextran T-500. There were no significant changes observed in average sarcomere lengths or in striation pattern uniformity at any concentration. But cell widths decreased and stiffness increased in both polymers in a concentration-osmotic pressure-dependent relationship. Changes in cell width and stiffness were repeatable in either polymer, but only after an initial compression with a 10 or 15% concentration solution. The observed reduction in cell width after initial compression correlates well with known myofilament lattice spacing compression in rat cardiac muscle and is qualitatively similar to compressions seen in skeletal muscle preparations. But the cardiac myofilament lattice may not be as compressible as the skeletal lattice. Like skeletal muscle, stiffness exhibits a two-phase relationship where most of the increase occurs at solution osmotic pressures greater than 20 Torr. Finally, the inherently greater passive stiffness-length relationship of cardiac muscle is maintained at higher osmotic pressures such that the passive elastic modulus is strongly length dependent.

Actin Cytoskeleton↗

PubMed2005

Rheology of asphaltene-toluene/water interfaces.

The stability of water-in-crude oil emulsions is frequently attributed to a rigid asphaltene film at the water/oil interface. The rheological properties of these films and their relationship to emulsion stability are ill defined. In this study, the interfacial tension, elastic modulus, and viscous modulus were measured using a drop shape analyzer for model oils consisting of asphaltenes dissolved in toluene for concentrations varying from 0.002 to 20 kg/m(3). The effects of oscillation frequency, asphaltene concentration, and interface aging time were examined. The films exhibited viscoelastic behavior. The total modulus increased as the interface aged at all asphaltene concentrations. An attempt was made to model the rheology for the full range of asphaltene concentration. The instantaneous elasticity was modeled with a surface equation of state (SEOS), and the elastic and viscous moduli, with the Lucassen-van den Tempel (LVDT) model. It was found that only the early-time data could be modeled using the SEOS-LVDT approach; that is, the instantaneous, elastic, and viscous moduli of interfaces aged for at most 10 minutes. At longer interface aging times, the SEOS-LVDT approach was invalid, likely because of irreversible adsorption of asphaltenes on the interface and the formation of a network structure.

Journal Article↗

PubMed2006

Influence of interfacial characteristics on Ostwald ripening in hydrocarbon oil-in-water emulsions.

The influence of the nature of the interfacial membrane on the kinetics of droplet growth in hydrocarbon oil-in-water emulsions was investigated. Droplet growth rates were determined by measuring changes in the droplet size distribution of 1 wt % n-tetradecane or n-octadecane oil-in-water emulsions using laser diffraction. The interfacial properties of the droplets were manipulated by coating them with either an SDS layer or with an SDS-chitosan layer using an electrostatic deposition method. The emulsion containing SDS-coated octadecane droplets did not exhibit droplet growth during storage for 400 h, which showed that it was stable to Ostwald ripening because of this oils extremely low water-solubility. The emulsion containing SDS-coated n-tetradecane droplets showed a considerable increase in mean droplet size with time, which was attributed to Ostwald ripening associated with this oils appreciable water-solubility. On the other hand, an emulsion containing SDS-chitosan coated n-tetradecane droplets was stable to droplet growth, which was attributed to the ability of the interfacial membrane to resist deformation because of its elastic modulus and thickness. This study shows that the stability of emulsion droplets to Ostwald ripening can be improved by using an electrostatic deposition method to form thick elastic membranes around the droplets.

Alkanes↗