PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “SOIL”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources

Adsorption-desorption characteristics of lead in variable charge soils.

Adsorption desorption processes of Pb at contaminated levels in two variable charge soils were investigated. The red soil (RAR) developed on the Arenaceous rock (clayey, mixed siliceous thermic typic Dystrochrept) adsorbed more Pb2+ than the red soil (REQ) derived from the Quaternary red earths (clayey, kaolinitic thermic plinthite Aquult). The maximum adsorption values (Xm) that were obtained from the simple Langmuir model were 52.6 mmol Pb2+ kg(-1) soil and 29.9 mmol Pb2+ kg(-1) soil, respectively, for the RAR and REQ. Adsorption of Pb2+ decreased soil pH by 1.10 unit for the RAR soil and 1.21 unit for the REQ soil at the highest loading. The adsorption equilibrium pH of RAR was higher than that of REQ at the same Pb2+ concentration. The distribution coefficient (Kd) of Pb in the soils decreased exponentially with increasing Pb2+ loading. Most of the adsorbed Pb2+ in the soils was not desorbed in the 0.01 mol L(-1) NaNO3 solution. After five successive extractions with NaNO3, only 0-11% of the total adsorbed Pb2+ in the RAR soil was desorbed and the corresponding value of the REQ soil was 0-19%, indicating that the RAR soil had a greater affinity for Pb2+ than the REQ soil at the same Pb2+ loading. Different mechanisms might be involved in Pb2+ adsorption/desorption at different levels of Pb2+ loading and between the two soils.

Adsorption↗

Characterization and solubility measurements of uranium-contaminated soils to support risk assessment.

Remediation of uranium-contaminated soils is considered a high priority by the U.S. Department of Energy because these soils, if left untreated, represent a hazard to the environment and human health. Because the risk to human health is a function of the solubility of uranium in the soils, the objectives of this work are to measure the uranium solubility of two contaminated soils, before and after remedial treatment, and determine the health risk associated with these soils. Two carbonate-rich, uranium-contaminated soils from the U.S. Department of Energy Fernald Environmental Management Project facility near Cincinnati, Ohio, as well as two nearby background soils were characterized and their uranium solubility measured in a 75-d solubility experiment using acid rain, groundwater, lung serum, and stomach acid simulants. Results show that the soluble uranium levels of each soil by each simulant are greatly influenced by their contamination source term. Risk calculations and biokinetic modeling based on the solubility data show that the risks from the soil ingestion and groundwater ingestion pathways are the predominant contributors to the total carcinogenic risk, whereas the risk from the soil inhalation pathway is the smallest contributor to this risk. However, kidney toxicity was the greater health concern of the Fernald Environmental Management Project soils, primarily from undiluted ingestion of the groundwater solution following contact with the contaminated soils. Sensitivity analyses indicate that uranium solubility is a key parameter in defining kidney toxicity; therefore, without proper consideration of the solubility of radionuclides/metals in untreated and treated soils, important factors may be overlooked which may result in soil cleanup goals or limits which are not protective of human health and the environment. We recommend that characterization and measurement of target radionuclides/metals solubilities should also be required by the regulatory community to support the establishment of scientifically-sound, site-specific, soil cleanup goals or limits.

Acid Rain↗

Effect of soil properties on lead bioavailability and toxicity to earthworms.

Soil properties are important factors modifying metal bioavailability to ecological receptors. Twenty-one soils with a wide range of soil properties (USA; http://soils.usda.gov/technical/classification/taxonomy/) were amended with a single concentration of Pb (2,000 mg/kg) to determine the effects of soil properties on Pb bioavailability and toxicity to earthworms. Earthworm mortality ranged from 0 to 100% acute mortality following exposure to the same total concentration of Pb (2,000 mg/kg) in amended field soils. Internal Pb concentrations in earthworms ranged from 28.7 to 782 mg/kg, with a mean of 271 mg/kg. Path analysis was used to partition correlations in an attempt to discern the relative contribution of each soil property. Results of path analysis indicated that pH was the most important soil property affecting earthworm mortality (p < 0.01) and internal Pb (p < 0.05). Soil pH was related inversely to mortality and internal Pb, soil solution Pb, and Pb bioavailability. The most important soil property modifying reproduction was amorphous iron and aluminum oxides (FEAL). Because FEAL is rich in pH-dependent cation-exchange sites, several soil properties, including pH, FEAL, and cation-exchange capacity, have a causal effect on Pb adsorption and soluble Pb. Path analysis is useful for assessing contaminated soils with a wide range of soil properties and can assist in ecological risk assessment and remediation decisions for contaminated sites. Soil properties are important factors modifying metal bioavailability and toxicity and should be considered during the ecological risk assessment of metals in contaminated soils.

Animals↗

Ambient copper concentrations in agricultural and natural European soils: an overview.

Copper concentrations in soil are affected by a large number of processes related to the natural spatial variability (geochemistry), the amount released, the spatial and temporal distributions of these releases, and the large number of transportation, complexation, and dissolution processes. The present study reports the generated country-specific and land use-specific environmental concentration distributions of ambient copper exposure levels in European soils that were used for the derivation of "reasonable worst-case" predicted environmental copper concentrations (RWC-ambient copper PEC) for three types of soil uses: Agricultural soils, forest soils, and undefined grassland soils. Only recent and high-quality monitoring data (Q1) that comply with a number of criteria (i.e., sampling strategy, land use, digestion method, and absence of point sources) were selected for this purpose. Data treatment procedures used in the present study were based on the methods and concepts laid down in the European Union Technical Guidance Document on Risk Assessment and in the "combined monitoring-based and modeling-based priority setting" procedure. The derived median RWC-ambient copper PEC for European agricultural soils is 31.1 mg/kg dry weight, with the lowest and highest RWC-ambient copper PEC found in Belgium (16.1 mg/kg dry wt) and northern Italy (57.5 mg/kg dry wt), respectively. The high value for Italian soils probably is related to the (recent) volcanic origin of these soils. Similarly, RWC-ambient copper PECs were derived for forest soils and undefined grassland soils (24.4 and 35.3 mg/kg, respectively). Observed differences between the diifferent soil uses could be related to various parameters and processes that determine the copper levels in soil (e.g., soil type associated with specitic soil uses, addition of fertilizers and pesticides, and presence of cattle).

Agriculture↗

Estimating soil phosphorus requirements and limits from oxalate extract data.

Excessive fertilizer and manure phosphorus (P) inputs to soils elevates P in soil solution and surface runoff, which can lead to freshwater eutrophication. Runoff P can be related to soil test P and P sorption saturation, but these approaches are restricted to a limited range of soil types or are difficult to determine on a routine basis. The purpose of this study was to determine whether easily measurable soil characteristics were related to the soil phosphorus requirements (P(req), the amount of P sorbed at a particular solution P level). The P(req) was determined for 18 chemically diverse soils from sorption isotherm data (corrected for native sorbed P) and was found to be highly correlated to the sum of oxalate-extractable Al and Fe (R2 > 0.90). Native sorbed P, also determined from oxalate extraction, was subtracted from the P(req) to determine soil phosphorus limits (PL, the amount of P that can be added to soil to reach P(req)). Using this approach, the PL to reach 0.2 mg P L(-1) in solution ranged between -92 and 253 mg P kg(-1). Negative values identified soils with surplus P, while positive values showed soils with P deficiency. The results showed that P, Al, and Fe in oxalate extracts of soils held promise for determining PL to reach up to 10 mg P L(-1) in solution (leading to potential runoff from many soils). The soil oxalate extraction test could be integrated into existing best management practices for improving soil fertility and protecting water quality.

Adsorption↗

Trace element chemistry in residual-treated soil: key concepts and metal bioavailability.

Trace element solubility and availability in land-applied residuals is governed by fundamental chemical reactions between metal constituents, soil, and residual components. Iron, aluminum, and manganese oxides; organic matter; and phosphates, carbonates, and sulfides are important sinks for trace elements in soil-residual systems. The pH of the soil-residual system is often the most important chemical property governing trace element sorption, precipitation, solubility, and availability. Trace element phytoavailability in residual-treated soils is often estimated using soil extraction methods. However, spectroscopic studies show that sequential extraction methods may not be accurate in perturbed soil-residual systems. Plant bioassay is the best method to measure the effect of residuals on phytoavailability. Key concepts used to describe phytoavailability are (i) the salt effect, (ii) the plateau effect, and (iii) the soil-plant barrier. Metal availability in soil from metal-salt addition is greater than availability in soil from addition of metal-containing residuals. Plant metal content displays plateaus at high residual loadings corresponding to the residual's metal concentration and sorption capacity. The soil-plant barrier limits transmission of many trace elements through the food chain, although Cd (an important human health concern) can bypass the soil-plant barrier. Results from many studies that support these key concepts provide a basis of our understanding of the relationship between trace element chemistry and phytoavailability in residual-treated soils. Research is needed to (i) determine mechanisms for trace element retention of soil-residual systems, (ii) determine the effect of residuals on ecological receptors and the ability of residuals to reduce ecotoxicity in metal-contaminated soil, and (iii) predict the long-term bioavailability of trace elements in soil-residual systems.

Biological Availability↗

Mesocosm-scale evaluation of faunal and microbial communities of aerated and unaerated leachfield soil.

Aeration improves the capacity of leachfields to decontaminate and reduce the nutrient load of wastewater. To gain a better understanding of the effects of aeration, we examined the faunal and microbial communities of septic system leachfield soil (0-4 and 4-13 cm) using replicated (n = 3) mesocosms that were actively aerated (AIR) or unaerated (LEACH). Protozoa were 40 to 140 times more abundant in AIR than in LEACH soil. No nematodes were found in LEACH soil, whereas AIR soil contained 5 to 14 x 10(3) nematodes (all bacteriovores) kg(-1). Active microbial biomass was four to five times higher in AIR than LEACH soil. Proteobacteria and actinomycetes/sulfate-reducing bacteria constituted a higher proportion of the community in AIR soil, whereas anaerobic Gram-negative bacteria/firmicutes were more prominent in LEACH soil. Ratios of prokaryotic to eukaryotic phospholipid fatty acids (PLFAs) were higher in LEACH soil, as were membrane stress index values, whereas the starvation index was higher in AIR soil. Community-level physiological profiles showed that 29 and 30 different substrates were used for growth by LEACH and AIR soil microorganisms, respectively. The AIR soil had more microorganisms capable of growing on 10 substrates, whereas growth on two substrates was higher in LEACH soil. Polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) analysis of 16S rRNA gene fragments revealed greater diversity of dominant phylotypes in AIR than LEACH soil, with communities separated by treatment. Aerated leachfield soil had a larger and more diverse faunal and microbial community than unaerated soil, possibly due to differences in the type and availability of electron acceptors.

Aerobiosis↗

Phytotoxicity of 2,4,6-trinitrotoluene (TNT) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) in spiked artificial and natural forest soils.

Toxicity of 2,4,6-trinitrotoluene (TNT) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) using two terrestrial plant species, lettuce (Lactuca sativa) and barley (Hordeum vugare), was assessed in artificial soil (silica) and forest soil. Lettuce emergence was significantly decreased after 5 days of exposure to TNT nominal spiked concentrations >/= 1,040 mg/kg dry soil in silica. Barley emergence was significantly reduced after 14 days of exposure at initial (t = 0) TNT concentrations >/= 55.9 +/- 4.5 mg/kg dry soil in silica and at >/= 291.9 +/- 42.8 mg/kg dry forest soil. Biomasses of shoot and roots of barley seeds were significantly reduced after 14 days of exposure at TNT initial exposure concentrations >/= 55.9 +/- 4.5 (LOEC) mg/kg dry soil in silica. Results were similar with the forest soil (LOEC = 91.4 +/- 7.9 mg TNT/kg dry soil) using the root growth parameter, but the shoot biomass was reduced only at concentrations >/= 291.9 +/- 42.8 mg TNT/kg dry soil. Plants were not affected by an HMX exposure up to 3,320 +/- 1,019 mg/kg dry soil using silica or 1,866 +/- 438 mg/kg dry soil using a forest soil. During the 14-day experiments, TNT was partially transformed in the spiked soil samples, as indicated by the presence of its amino metabolites (2-ADNT and 4-ADNT). Higher quantities of metabolites were detected in forest soils having higher initial TNT concentrations (</= 1,849.4 +/- 228.2 mg/kg) compared to silica (</= 239.3 +/- 88.0 mg TNT/kg). After 14 days, TNT concentrations in spiked silica and forest soil were reduced up to 80.5% at 55.9 +/- 4.5 mg/kg initial concentration and 94.4% at 91.4 +/- 7.9 mg/kg initial concentration, respectively. Data indicate that TNT is the probable phytotoxicant because it decreased plant emergence and growth in the presence and absence of the ADNT metabolites.

Azocines↗

Chlorobenzoate-degrading bacteria in similar pristine soils exhibit different community structures and population dynamics in response to anthropogenic 2-, 3-, and 4-chlorobenzoate levels.

A study was conducted to determine the diversity of 2-, 3-, and 4-chlorobenzoate (CB) degraders in two pristine soils with similar physical and chemical characteristics. Surface soils were collected from forested sites and amended with 500 microg of 2-, 3-, or 4-CB g(-1) soil. The CB levels and degrader numbers were monitored throughout the study. Degraders were isolated, grouped by DNA fingerprints, identified via 16S rDNA sequences, and screened for plasmids. The CB genes in selected degraders were isolated and/or sequenced. In the Madera soil, 2-CB and 4-CB degraded within 11 and 42 d, respectively, but 3-CB did not degrade. In contrast, 3-CB and 4-CB degraded in the Oversite soil within 14 and 28 d, respectively, while 2-CB did not degrade. Approximately 10(7) CFU g(-1) of degraders were detected in the Madera soil with 2-CB, and the Oversite soil with 3- and 4-CB. No degraders were detected in the Madera soil with 4-CB even though the 4-CB degraded. Nearly all of the 2-CB degraders isolated from the Madera soil were identified as a Burkholderia sp. containing chromosomally encoded degradative genes. In contrast, several different 3- and 4-CB degraders were isolated from the Oversite soil, and their populations changed as CB degradation progressed. Most of these 3-CB degraders were identified as Burkholderia spp. while the majority of 4-CB degraders were identified as Bradyrhizobium spp. Several of the 3-CB degraders contained the degradative genes on large plasmids, and there was variation between the plasmids in different isolates. When a fresh sample of Madera soil was amended with 50, 100, or 200 microg 3-CB g(-1), 3-CB degradation occurred, suggesting that 500 microg 3-CB g(-1) was toxic to the degraders. Also, different 3-CB degraders were isolated from the Madera soil at each of the three lower levels of 3-CB. No 2-CB degradation was detected in the Oversite soil even at lower 2-CB levels. These results indicate that the development of 2-, 3-, and 4-CB degrader populations is site-specific and that 2-, 3-, and 4-CB are degraded by different bacterial populations in pristine soils. These results also imply that the microbial ecology of two soils that develop under similar biotic and abiotic environments can be quite different.

Arizona↗

Use of iodide to enhance the phytoextraction of mercury-contaminated soil.

Low bioavailability of mercury (Hg) in soil is a restricting factor in phytoextraction of Hg-contaminated soil. Iodide is known to mobilize Hg in soil and, therefore, the aim of this study was to investigate the possibility to use iodide to increase phytoextraction of Hg. The sensitivity of willow to iodide was investigated in both hydroponics with 0-10 mM KI and in soil with 0.2 and 1 mM KI addition. The capacity to accumulate HgI(2) was compared with that of Hg(NO(3))(2) in hydroponics. Soil extractions with 0-2 mM KI were used to study mobilization of Hg in aged Hg-spiked soil. Additions of KI (0.2-1 mM) were used in pot tests with aged Hg-spiked soil as well as in field trials in an industrial Hg-contaminated soil to study whether iodide addition increased the accumulation of Hg from contaminated soil and the translocation of Hg to the shoots. The total Hg contents in plants, soils and extracts were analyzed by CVAAS. The results showed that too high KI concentration was toxic to plants. Moreover, KI was toxic to plants at lower concentrations in hydroponics than in soil additions. KI (85 microM) in hydroponics gave 50% growth decrease in terms of dry weight of shoot biomass, whereas 0.2 mM KI in soil addition could be tolerated by the plant without growth disturbance. Willow accumulated Hg from HgI(2) solution slower than that from Hg(NO(3))(2) solution. KI mobilized Hg in contaminated soil and thereby increased the bioavailability of Hg in soil. Up to 1 mM KI addition increased the Hg concentrations to about 5, 3 and 8 times, respectively, in the leaves, branches and roots. However, the Hg translocation to the shoots did not show an increase with KI addition. Only less than 1% of the total Hg accumulated in the plant was distributed in the shoots. We may conclude that iodide addition enhances the phytoextraction of Hg, however, the translocation of Hg to the shoots is still too low and therefore it will not be realistic to use this method for phytoextraction of Hg-contaminated soil in practice.

Biodegradation, Environmental↗

Long-term flow rates and biomat zone hydrology in soil columns receiving septic tank effluent.

Soil absorption systems (SAS) are used commonly to treat and disperse septic tank effluent (STE). SAS can hydraulically fail as a result of the low permeable biomat zone that develops on the infiltrative surface. The objectives of this experiment were to compare the hydraulic properties of biomats grown in soils of different textures, to investigate the long-term acceptance rates (LTAR) from prolonged application of STE, and to assess if soils were of major importance in determining LTAR. The STE was applied to repacked sand, Oxisol and Vertisol soil columns over a period of 16 months, at equivalent hydraulic loading rates of 50, 35 and 8L/m(2)/d, respectively. Infiltration rates, soil matric potentials, and biomat hydraulic properties were measured either directly from the soil columns or calculated using established soil physics theory. Biomats 1 to 2 cm thick developed in all soils columns with hydraulic resistances of 27 to 39 d. These biomats reduced a 4 order of magnitude variation in saturated hydraulic conductivity (K(s)) between the soils to a one order of magnitude variation in LTAR. A relationship between biomat resistance and organic loading rate was observed in all soils. Saturated hydraulic conductivity influenced the rate and extent of biomat development. However, once the biomat was established, the LTAR was governed by the resistance of the biomat and the sub-biomat soil unsaturated flow regime induced by the biomat. Results show that whilst initial soil K(s) is likely to be important in the establishment of the biomat zone in a trench, LTAR is determined by the biomat resistance and the unsaturated soil hydraulic conductivity, not the K(s) of a soil. The results call into question the commonly used approach of basing the LTAR, and ultimately trench length in SAS, on the initial K(s) of soils.

Filtration↗

Use of solvents to enhance PAH biodegradation of coal tar-contaminated soils.

Bioremediation of coal tar-contaminated soils containing polycyclic aromatic hydrocarbons (PAHs) is highly challenging because of the low solubility and strong sorption properties of PAHs. Five coal tar-contaminated soils from former manufactured gas plant (MGP) sites were pretreated with two solvents, acetone and ethanol to enhance the bioavailability of the PAH compounds. The biodegradation of various PAHs in the pretreated soils was assessed using soil slurry reactors. The total PAH degradation rates for soils pretreated with solvents were estimated to be about two times faster than soils that were not pretreated with solvents. For example, the total PAH first order degradation rate constants were 0.165+/-0.032, 0.147+/-0.020, and 0.076+/-0.009 day(-1) for Vandalia (EXC) soil that were pretreated with acetone, ethanol, and with no solvent, respectively. A distinctive advantage for soils pretreated with solvents was the enhanced removal of 5-ring PAH compounds such as benzo(a)pyrene and to a limited extent 4-ring compounds such as chrysene. Even for soils with 3.5% or more organic carbon content (two soils out of five), the degradation rate constants of chrysene were found to be two times faster than soils that were not pretreated. The degradation rate constants of benzo(a)pyrene were enhanced by 2-6 times for all five contaminated soils that were pretreated with solvents. To further elucidate trends that control the solvent treatment, the percent improvement in degradation rate constants (100 x rate constants for pretreated soils/rate constants for non-treated soils) for 16 PAHs were found to correlate well with the PAH partition coefficients (K(oc)). Except for phenanthrene and the clay fraction of the soil, correlations between the percent improvement in degradation rates constants and several physical properties of the soils were poor and sporadic. This implies that the enhancement in PAH availability using solvent treatment was driven by the distribution of the PAHs between the solvent and the adsorbed PAHs.

Adsorption↗

Uncertainties and novel prospects in the study of the soil carbon dynamics.

Establishment of the Kyoto Protocol has resulted in an effort to look towards living biomass and soils for carbon sequestration. In order for carbon credits to be meaningful, sustained carbon sequestration for decades or longer is required. It has been speculated that improved land management could result in sequestration of a substantial amount of carbon in soils within several decades and therefore can be an important option in reducing atmospheric CO2 concentration. However, evaluation of soil carbon sources and sinks is difficult because the dynamics of soil carbon storage and release is complex and still not well understood. There has been rapid development of quantitative techniques over the past two decades for measuring the component fluxes of the global carbon cycle and for studying the soil carbon cycle. Most significant development in the soil carbon cycle study is the application of accelerator mass spectrometry (AMS) in radiocarbon measurements. This has made it possible to unravel rates of carbon cycling in soils, by studying natural levels of radiocarbon in soil organic matter and soil CO2. Despite the advances in the study of the soil carbon cycle in the recent decades, tremendous uncertainties exist in the sizes and turnover times of soil carbon pools. The uncertainties result from lack of standard methods and incomplete understanding of soil organic carbon dynamics, compounded by natural variability in soil carbon and carbon isotopic content even within the same ecosystem. Many fundamental questions concerning the dynamics of the soil carbon cycle have yet to be answered. This paper reviews and synthesizes the isotopic approaches to the study of the soil carbon cycle. We will focus on uncertainties and limitations associated with these approaches and point out areas where more research is needed to improve our understanding of this important component of the global carbon cycle.

Carbon↗

Factors affecting EDTA extraction of lead from lead-contaminated soils.

The effects of solution:soil ratio, major cations present in soils, and the ethylenediaminetetraacetic acid (EDTA):lead stoichiometric ratio on the extraction of lead using EDTA were studied for three different Superfund site soils, one rifle range soil, and one artificially lead-contaminated soil. Extraction of lead from the lead-contaminated soils was not affected by a solution:soil ratio as low as 3:1 but instead was dependent on the quantity of EDTA present. Results of the experiments showed that the extraction efficiencies were different for each soil. If sufficiently large amount of EDTA was applied (EDTA-Pb stoichiometric ratio greater than 10), most of the lead were extracted for all soils tested except for a Superfund site soil from a lead mining area. The differences in extraction efficiencies may be due to the major cations present in soils which may compete with lead for active sites on EDTA. For example, iron ions most probably competed strongly with lead for EDTA ligand sites for pH less than 6. In addition, copper and zinc may potentially compete with lead for EDTA ligand sites. Experimental results showed that addition of EDTA to the soil resulted in a very large increase in metals solubility. The total molar concentrations of major cations extracted were as much as 20 times the added molar concentration of EDTA. For some of the soils tested, lead may have been occluded in the iron oxides present in the soil which may affect lead extraction. While major cations present in the soil may be one of the factors affecting lead extraction efficiency, the type of lead species present also play a role.

Cations↗

Mobilization of heavy metals and arsenic in polluted wetland soils and its dependence on dissolved organic matter.

The wetland soils of the Mulde river in the industrial district of Bitterfeld-Wolfen (Germany) are highly contaminated with heavy metals and arsenic. We studied the mobility of accumulated heavy metals and arsenic and the influence of dissolved organic matter (DOM) on element mobility. Undisturbed soil cores were taken from five different sites to represent a wide range of heavy-metal contamination, soil properties and dissolved organic carbon (DOC) concentrations. The acid-soluble concentrations (mostly equal to the total content) were up to 1100 mg kg-1 for Zn, 800 mg kg-1 for Cr, 364 mg kg-1 for Cu, 265 mg kg-1 for As and 37 mg kg-1 for Hg, depending on the sampling site. Percolation experiments using small lysimeters with undisturbed topsoil cores illustrated a considerable mobilization of Zn, Cd, Cu, Cr and Hg, depending on soil properties. Up to 80 micrograms l-1 Cd, 8 mg 1-1 Zn, 130 micrograms l-1 Cr, 160 micrograms l-1 Cu and 7 micrograms l-1 Hg were detected in the soil percolates. Arsenic mobilization was low. The concentration of Cr, Hg, Cu and As in the soil percolates was positively correlated with DOM. Besides the element content (mobile or acid-soluble), soil pH and soil characteristics describing the soil potential for heavy-metal adsorption (clay, oxides, cation exchange capacity), the DOC concentration in the soil solution should be known to access the potential mobilization of Hg, Cr, Cu and As. In contrast, Cd and Zn mobilization depends on soil pH and mobile element content, but not on DOM. Additional studies on two soil profiles (down to 1.5 m) confirmed the translocation of heavy metals from the highly contaminated topsoil into deeper soil horizons and into the groundwater and the influence of DOM as revealed with the percolation experiment. Our results also showed that DOM is of minor importance on the mobilization of heavy metals in soils with a low soil pH (< 4.5).

Adsorption↗

Influence of organic amendments on copper distribution among particle-size and density fractions in Champagne vineyard soils.

The intensive use for over 100 years of copper sulfate (Bordeaux mixture) to fight against mildew in vineyard soils has led to an important, widespread accumulation of Cu (100 to 1500 mg Cu kg-1 soil). In Champagne vineyards, organic amendments are used currently to increase soil fertility and to limit soil erosion. Organic amendments may have a direct effect on the retention of Cu in the soil. To assess the influence of the organic management on the fate of Cu in calcareous Champagne vineyard soils, we studied Cu distribution (1) in the soil profile and (2) among primary soil particles, in vineyard parcels with different amendments. Amendments were oak-bark, vine-shoots and urban compost. The results were compared with the amount and the distribution of Cu in an unamended calcareous soil. Physical soil fractionations were carried out to separate soil primary particles according to their size and density. Cu has a heterogeneous distribution among soil particle fractions. Two fractions were mainly responsible for Cu retention in soils: the organic debris larger than 50 microns or coarse particulate organic matter (POM) issued from the organic amendments, and the clay-sized fraction < 2 microns. The POM contained up to 2000 mg Cu kg-1 fraction and the clay fraction contained up to 500 mg Cu kg-1 fraction. The clay-sized fraction was responsible for almost 40% of the total amount of Cu in the four parcels. POM was predominantly responsible for the differences in Cu contents between the unamended and the three amended parcels. Our results attested that methods of soil particle-size fractionation can be successfully used to assess the distribution of metal elements in soils.

Agriculture↗

Formation of chloropyromorphite in a lead-contaminated soil amended with hydroxyapatite.

Conversion of soil Pb to pyromorphite [Pb5(PO4)3Cl] was evaluated by reacting a Pb contaminated soil collected adjacent to a historical smelter with hydroxyapatite [Ca5(PO4)3OH]. In a dialysis experiment where the soil and hydroxyapatite solids were placed in separate dialysis bags suspended in 0.01 M NaNO3 solution a crystalline precipitate, identified as chloropyromorphite, formed on the dialysis membrane containing the soil. The aqueous composition of the solution indicated that dissolution of solid-phase soil Pb was the rate-limiting step for pyromorphite formation. Addition of hydroxyapatite to the soil caused a decrease in each of the first four fractions of sequential extractable Pb and a 35% increase in the recalcitrant extraction residue. After a 240-d incubation at field-moisture content there was a further increase in the recalcitrant extraction residue fraction of the hydroxyapatite-amended soil to 45% of the total soil Pb. The increase in the extraction residue fraction in the hydroxyapatite amended 0-d incubated soil as compared to the control soil illustrates that the chemical extraction procedure itself caused changes in extractability. Thus, the chemical extraction procedure cannot easily be utilized to confirm changes occurring in amended soils. The further increase after the 240-d incubation implies that the reaction also occurs in the soil during incubation. Extended X-ray absorption fine structure (EXAFS) spectroscopy indicated that after the 240-d incubation the hydroxyapatite treatment caused a change in the average, local molecular bonding environment of soil Pb. Low-temperature EXAFS spectra (chi data and radial structure functions--RSFs) showed a high degree of similarity between the chemical extraction residue and synthetic pyromorphite, providing additional evidence that the change of soil Pb to pyromorphite is possible by simple amendments of hydroxyapatite to soil.

Absorptiometry, Photon↗

Zinc coordination to multiple ligand atoms in organic-rich surface soils.

We report on the solid-phase speciation of naturally occurring Zn in metalliferous organic-matter-rich surface soils. Synchrotron-based studies were used to probe elemental distribution and associations in soil particles (micro-XRF) together with the mineralogy (micro-XRD) and Zn bonding environment (Zn-micro-XANES) at the micrometer-scale level. The average bonding environment of Zn was also probed for bulk soils using XANES. We found the distribution of elements within soil particles to be heterogeneous; however, some elements are consistently co-located. While conventional XRD analyses of whole soils did not identify any Zn mineral phase, synchrotron-based-micro-XRD analyses indicated that sphalerite (ZnS) is present in a particle from a wetland soil (soil labeled G3). Linear combination fit (LCF) analyses of XANES spectra collected for bulk soils (Zn-XANES) and microm-regions (Zn-micro-XANES) within soil particles suggest Zn bonds to oxygen-, nitrogen-, and sulfur-functional groups in these sulfur-, nitrogen-, and zinc-rich organic surface soils. The XANES spectra of all bulk soils and of all microm-regions except for the wetland soil (G3), where ZnS was the most significant constituent, were best fitted by the Zn-arginine reference compound and therefore seems to indicate Zn bonding to nitrogen. Thus, these results provide compelling evidence of the formation of highly covalent Zn-organic bonds in the organic-rich surface soils that were studied. This may explain in part why metal partition coefficients (Kd) are generally higher in organic soils, and why the toxic thresholds for total metal concentrations are higher in organic than in mineral soils.

Electron Spin Resonance Spectroscopy↗