SEARCH · PubMed Health

Results for “LUBRICATION”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources

PubMed2000

Influence of gelatin and bovine serum lubricants on ultra-high molecular weight polyethylene wear debris generated in in vitro simulations.

Ultra-high molecular weight polyethylene (UHMWPE) wear debris induced osteolysis has a major role in the late aseptic loosening and ultimate failure of total hip replacements (THR). Clinically relevant in vitro simulations of wear are essential to predict the osteolytic potential of bearing surfaces in artificial hip joints. Newborn calf or bovine serum has been accepted as a boundary lubricant for such in vitro tests, but its biological stability has been questioned. This study compared the wear factors, number of wear particles and levels of microbial contamination produced in bovine serum and a gelatin-based lubricant. The wear factors produced by the two lubricants were not significantly different, however the wear debris morphology produced was substantially different. The bovine serum became contaminated with micro-organisms within 28 h, whereas the protein-based lubricant remained uncontaminated. The results showed that bovine serum was not a stable boundary lubricant. They also showed that although the wear factors for the two solutions were not significantly different, the protein-based lubricant was not a suitable alternative to bovine serum because the wear debris produced was not clinically relevant.

Animals↗

PubMed1993

Sliding friction analysis of phosphatidylcholine as a boundary lubricant for articular cartilage.

Dipalmitoyl phosphatidylcholine (DPPC), the major lipidic component of the synovial fluid (45 per cent), has been implicated in previous studies in synovial joint lubrication as a potential boundary lubricant for articular cartilage. The purpose of this study was to evaluate the effectiveness of DPPC as a boundary lubricant at physiological stresses experienced by weight-bearing joints (up to 7.5 MPa). The sliding coefficients of static and kinetic friction for glass surfaces coated with DPPC layers of physiological thickness (70 nm) were measured as a function of average contact stress, contact geometry (point and line), applied load and relative velocity (from 25 to 0 mm/s) and compared to the coefficient of friction for clean glass in the same conditions. The coefficient of friction for DPPC-lubricated surfaces was dependent on contact geometry, obeyed Amonton's law (not dependent on axial load or contact area), was dependent on relative velocity within the range stated and was an effective lubricant at physiological stresses. This study showed that dipalmitoyl phosphatidylcholine can be an effective boundary lubricant at stresses observed in load-bearing joints. Because of their surface-active nature, these adsorbed molecules might also act as a protective layer for the articular surfaces.

Animals↗

PubMed1996

Determination of lubricating film thickness for permeable hydrogel and non-permeable polyurethane layers bonded to a rigid substrate with particular reference to cushion form hip joint replacements.

The lubricating film thickness in a model of compliant layered bearings, using both permeable hydrogels and non-permeable polyurethane elastomers for total hip joint replacements, has been measured using optical interferometry, under both entraining and squeeze-film motion. The film thickness in the lubricated contact was measured for both water and a 40 per cent glycerol solution in water as a function of entraining velocity and squeeze-film time. The measured lubricating film thickness for the permeable hydrogel was compared to that of the non-permeable polyurethane elastomer and little difference was found when the lubricating film thickness was sufficiently large (greater than 150 nm). Comparison of the experimental results and the theoretical predictions based upon elastohydrodynamic lubrication analysis showed good agreement in the entraining experiments where the film thickness was greater than 150 nm. In the squeeze-film experiments the experimental measurements were greater than the theoretical predictions for all squeeze times due to the formation of a central pocket of fluid which was not predicted by the simple theory used. This also occurred for the hydrogels for films greater than 150 nm. For longer squeeze times the film thickness for the hydrogel fell below the theoretical prediction. This was considered to be due to the permeability of the hydrogel reducing the film thickness when the film thickness was less than 150 nm. The permeability of the hydrogel was not modelled in the theoretical lubrication analysis used in this study.

Biomechanical Phenomena↗

PubMed2000

Frequent use of lubricants for anal sex among men who have sex with men: the HIV prevention potential of a microbicidal gel.

OBJECTIVES: This study assessed frequency of rectal lubricant use, opinions about rectal microbicidal gels, and willingness to participate in acceptability trials of rectal microbicides among Latino men who have sex with men (MSM). METHODS: Latino MSM (N = 307) living in New York City were surveyed from October 1995 through November 1996. Eleven Latino MSM participated in a focus group. RESULTS: Among those having anal sex during the prior year, 93% used lubricants (59% always and 74% in at least 80% of sexual encounters) regardless of condom use. Of the 29 men who practiced anal sed but did not use condoms, 90% used lubricants with similar frequency. Of those using lubricants, 94% used at least 1 teaspoon per occasion. A transparent product, free of smell and taste, was favored. Of the MSM in the sample, 92% said that they would use a lubricant with an anti-HIV microbicidal agent, and 87% expressed interest in participating in an acceptability trial. Product and dispenser preferences also were discussed. CONCLUSIONS: A rectal lubricant with microbicidal properties appears acceptable and desirable to Latino men who have anal sex with other men.

Administration, Rectal↗

PubMedDate not supplied

Preventing sexual transmission of HIV: anti-HIV bioregulatory and homeostatic components of commercial sexual lubricants.

Certain safe over-the-counter (OTC) sexual lubricants such as Astroglide, KY Liquid, Replens, Vagisil, ViAmor, and Wet Stuff inhibit both cell-free HIV and the production of HIV by infected leukocytes in vitro even in the presence of seminal fluid. To identify which components of the lubricants were active against HIV, we tested five components (glycerin, methylparaben, propylparaben, polyquaternium-32, and propylene glycol). The paraben preservatives and propylene glycol in the lubricants did not inhibit HIV, while the common natural homeostatic metabolite, glycerin, and the thickener polyquaternium-32 did strongly inactivate infectious HIV and HIV-infected leukocytes. Activity against HIV and HIV-infected cells by glycerin was stable through 24 hours at 37 degrees C. Glycerin and polyquaternium-32 were active at minimum concentrations of approximately 2% and 0.01%, respectively--well within the highest FDA safety guidelines. Both active components disrupted infected leukocytes within 5 minutes which resulted in inhibition of infectious HIV production by infected leukocytes of greater than 25 to 100-fold. These components do not disrupt vaginal epithelial cells in vivo. These components also rapidly inactivate cell-free HIV by 10- to 30-fold. Thus, we may conclude that the active components of the OTC lubricants are glycerin and polyquaternium-32. Using these components, OTC sexual lubricants could be reformulated to optimize their anti-HIV activity. Furthermore, clinical trials of these lubricants and components seem to be indicated because of their FDA safety level, wide availability, and low cost.

Anti-Infective Agents, Local↗

PubMedDate not supplied

Inappropriate lubricant use with condoms by homosexual men.

Use of condoms has been advocated as an important method of reducing the risk of human immunodeficiency virus (HIV) transmission among high-risk groups such as homosexual and bisexual men, prostitutes, intravenous drug users, adolescents, and hemophiliacs. Despite risk-reduction education campaigns directed to gay men since the early 1980s, evidence shows continued deficits in condom-use skills and knowledge among gay men. Because most failures in the use of condoms are attributed to errors in use, increasing knowledge and skills in condom use is important in preventing HIV infection. Two groups of homosexual and bisexual men were sampled, those entering a risk-reduction education program and participants in a Gay Pride event. They were surveyed on their current sex practices and their efforts to reduce their risk of HIV infection. They were asked about their numbers of sex partners, specific sexual behaviors, use of condoms, types of condoms used, and lubricants used for genital-anal sex. The characteristics of those surveyed were similar to those of respondents in other studies of risk reduction among gay men. The use of an oil-based lubricant with condoms has been shown to weaken latex and to increase the likelihood of condom breakage, which use of water-based lubricants does not. Among respondents who reported having genital-anal sex, 60 percent reported use of an oil-based lubricant with a condom at least once during the year before the survey. Gay men in sexually exclusive relationships engaged in less consistent use of condoms for receptive genital-anal sex than did single gay men. The duration of their relationship with a partner was unrelated to the consistency of risk reducing behaviors practiced by men in sexually exclusive relationships. Gay Pride participants engaged in sexual behavior that was relatively more risky for HIV transmission than did the other group. Gay Pride participants used condoms less consistently for genital-anal sex than did the risk-reduction program entrants.The findings indicate the need for better risk reduction education efforts directed to gay men. Continued improvement in these efforts will require assessing the effectiveness and consistency of risk reduction efforts, determining the potential for gay men to relapse into more risky behavior, and identifying gaps in the knowledge of risk-reduction efforts among gay and bisexual men. Risk reduction programs need to emphasize motivational factors, provide basic information on how one determines the content of lubricants, explain why water-based lubricants only should be used, and teach how to use condoms properly. Active outreach is needed to gay and bisexual men who are unlikely to voluntarily enroll in risk-reduction programs.

Adult↗

PubMed1976

Lubrication and cartilage.

Mechanisms of lubrication of human synovial joints have been analysed in terms of the operating conditions of the joint, the synovial fluid and articular cartilage. In the hip and knee during a walking cycle the load may rise up to four times body weight. In the knee on dropping one metre the load may go up to 25 time body weight. The elastic modulus of cartilage is similar to that of the synthetic rubber of a car tyre. The cartilage surface is rough and in elderly specimens the centre line average is 2-75 mum. The friction force generated in reciprocating tests shows that both cartilage and synovial fluid are important in lubrication. The viscosity-shear rate relationships of normal synovial fluid show that it is non-Newtonian. Osteoarthrosic fluid is less so and rheumatoid fluid is more nearly Newtonian. Experiments with hip joints in a pendulum machine show that fluid film lubrication obtains at some phases of joint action. Boundary lubrication prevails under certain conditions and has been examined with a reciprocating friction machine. Digestion of hyaluronate does not alter the boundary lubrication, but trypsin digestion does. Surface active substances (lauryl sulphate and cetyl 3-ammonium bromide) give a lubricating ability similar to that of synovial fluid. The effectiveness of the two substances varies with pH.

Cartilage, Articular↗

PubMed1985

Effect of lubrication of frictional properties of sutures.

The results of this study have provided an insight into the behavior of sutures in the environment of fluids. It has been shown that friction could both increase or decrease with lubrication, depending upon the nature of the application. In tests on straight sutures, lubricants have generally led to an increase in friction. This was found in the present investigation as well as in another study which measured friction in sutures soaked in serum. These results are explained on the basis that higher friction is expected to arise if the lubricant formed a multilayer film between the sliding surfaces. In this instance, the resistance to shear flow by the lubricant becomes the governing factor. On the other hand, if only a small amount of lubricant, such as a monolayer film, is present between surfaces, as expected within the structure of a snugged surgical knot, the lubricant may play the role of decreasing adhesion and, thus, friction.

Lubrication↗

PubMed2002

Assessment of the influence of use on ecotoxicological characteristics of synthetic ester lubricants.

Synthetic ester lubricants need optimisation about their technical and their ecotoxicological characteristics. To determine the ecotoxicological potential the required examinations can be based on the procedure for a risk assessment of chemicals. At present risk classification of lubricant oils is carried out with new oil fluids that are normally prepared before application in aqueous bioassays. In order to improve the ecotoxicological characteristics of some lubricant oils, the quality of the preparation method has been optimised. The resulting preparation protocol leads to aqueous extracts of the oil fluids that can be tested using biological assays. The extent of the changes of the chemical composition caused by the use as well as the ecotoxicological effects caused by additives have to be taken into consideration. For this reason various used lubricants are tested in addition to new oil fluids. In this work various lubricant samples were examined with standardised bacterial growth assays with Vibrio fischeri and Pseudomonas putida, luminescence inhibition assay with V. fischeri, survival assay with Daphnia magna and algal growth inhibition assay with Scenedesmus subspicatus. The chemical characterisation of the aqueous extracts included the determination of pH, conductivity, heavy metals, the content of dissolved organic carbon, inorganic anions and the content of phosphorus. The results emphasize the thesis that environmentally acceptable lubricants can undergo a change of their ecotoxicological potential during the use. Some of the substances that are normally added to base fluids in order to enhance the applicability of the oils may possess a high toxicological potential.

Animals↗

PubMed2004

The effect of surface roughness on the adhesion of solid surfaces for systems with and without liquid lubricant.

We present molecular dynamics results for the interaction between two solid elastic walls during pull-off for systems with and without octane (C(8)H(18)) lubricant. We used two types of substrate--flat and corrugated--and varied the lubricant coverage from approximately 1/8 to approximately 4 ML (monolayers) of octane. For the flat substrate without lubricant the maximum adhesion was found to be approximately three times larger than for the system with the corrugated substrate. As a function of the octane coverage (for the corrugated substrate) the pull-off force first increases as the coverage increases from 0 to approximately 1 ML, and then decreases as the coverage is increased beyond monolayer coverage. It is shown that at low octane coverage, the octane molecules located in the substrate corrugation wells during squeezing are pulled out of the wells during pull-off, forming a network of nanocapillary bridges around the substrate nanoasperities, thus increasing the adhesion between two surfaces. For greater lubricant coverages a single capillary bridge is formed. The adhesion force saturates for lubricant coverages greater than 3 ML. For the flat substrate, during pull-off we observe discontinuous, thermally activated changes in the number n of lubricant layers (n-1-->n layering transitions), whereas for the corrugated substrate these transitions are "averaged" by the substrate surface roughness.

Journal Article↗

PubMedDate not supplied

Migration of mineral hydrocarbons into foods. 6. Press lubricants used in food and beverage cans.

Unused food and beverage cans were supplied by manufacturers together with two typical samples of press lubricants used to facilitate stamping of can ends. The lubricants were based on mineral hydrocarbon fractions. The cans were of aluminium two-piece construction (two sizes) and tin-plate steel three-piece construction (two sizes) and of four representative types. Gas chromatographic analysis was used to distinguish the two press lubricants from one another by their n-alkane profiles. Analysis of solvent extracts of the cans indicated that one of the two press lubricants had been used in the manufacture of the three-piece cans and the other lubricant for the two-piece cans. Residual levels of hydrocarbons were between 0.05 and 1.1 mg per can. Based on the capacity of the cans and assuming all the mineral hydrocarbon transferred to the contents, maximum levels in foods and beverages could be between 0.1 and 4.4 mg/kg. A limited number of retail products were also analysed. For the 35 samples covering 18 retail brands of canned foods and beverages, press lubricants were considered to be present in 50% of the products at levels ranging from 0.05 to 1.0 mg per can, equivalent to 0.1 to 3.6 mg/kg of food. Additionally mineral oil of unknown origin was detected in 10 of the retail products at levels of 0.1 to 4.7 mg/kg. Analysis of a sparkling apple juice packed in a glass bottle showed mineral oil at 0.3 mg/kg compared with 0.7 mg/kg for the same canned product, indicating that although mineral oils may be used in can manufacture they may also be derived from other parts of the food processing chain.

Beverages↗

PubMed2003

Lubricating properties of the initial salivary pellicle--an AFM study.

The role of saliva in the oral cavity is manifold; an important function is to serve as lubricant between hard (enamel) and soft (mucosal) tissues. Intraoral lubrication is of crucial importance in order to maintain functions such as deglutition, mastication and the faculty of speech. A large number of people suffer from impaired salivary functions, displaying symptoms such as 'dry mouth'. This results in a need for methods to assess the lubricating properties of both native saliva and potential artificial saliva formulations. Here, normal as well as lateral forces, acting between adsorbed salivary films, have been measured for the first time by means of colloidal probe atomic force microscopy (AFM). It was found that the presence of salivary pellicles between hard surfaces reduces the friction coefficient by a factor of 20. This reduction of friction is consistent with the long-range purely repulsive nature of the normal forces acting between the salivary films. The lubricating mechanism is presumably based on a full separation of the sliding surfaces by the salivary films. The friction between salivary films has been investigated at normal loads that cover the clinical jaw closing forces, and it can be concluded that the lubricating properties are maintained within this load interval. The present study indicates the usefulness of colloidal probe AFM, which offers a direct and quantitative measure of lubrication at a molecular level, in the study of biotribological phenomena. In particular, the results obtained here may have implications for the development of saliva substitutes.

Adult↗

PubMed1984

Toxicological characteristics of refinery streams used to manufacture lubricating oils.

In the past, reports on the tumorigenic potential of lubricating oils in experimental animals have poorly defined the materials under study. In this paper the results of mouse skin painting studies with 46 clearly defined samples of refinery streams associated with lubricating oil processing show that modern conventional solvent refining of distillates removes tumorigenic potential while conventional acid refining may not. Furthermore, dewaxing, hydrofinishing, and clay treatments do not appear to mitigate the tumorigenicity of the lubricant distillates. Lubricant processing has changed over the years and assessments of the carcinogenicity of present-day lubricating materials must be based on knowledge of modern processing.

Animals↗

PubMedDate not supplied

Boundary lubricating ability of synovial fluid in degenerative joint disease.

The boundary lubricating ability of eleven synovial fluids was measured in a miniaturized latex--glass test system. The specimens were obtained at necropsy from knees in which the degree of degenerative joint disease varied from none to very severe. The lubricating ability of the fluid was independent of the viscosity over a wide range of shear rates. It was not diminished even in advanced lesions. In two additional fluids, the mucin clot was poor; the lubricating ability of one of these was compromised. Thus, although degenerative joint disease, during its quiescent stages, is not associated with defective synovial lubrication, the possibility that transient defects might lead to cartilage wear during life has not been excluded. The measurements are believed to be valid indicators of boundary lubricating ability under physiological conditions despite the fact that the test surfaces were not cartilaginous and the loading was relatively low (up to 47 pounds per square inch).

Adult↗

PubMed1984

The lubricating activity of human synovial fluids.

The lubricating abilities of human synovial fluids were measured using a rotating cartilage-on-glass apparatus. A total of 247 human fluids were lubrication-tested. Of these, 20 of the 180 knee fluids from patients with degenerative/traumatic joint disease lubricated less well than normal bovine synovial fluid. The remainder of the fluids from the knee and other joints were equivalent to normal bovine synovial fluid in their lubricating properties. The concentrations of hyaluronic acid, protein, and sialic acid and the relative viscosity of 117 human fluid samples were determined, but no relationships between the gross composition and the lubricating abilities were apparent.

Glycoproteins↗

PubMed2004

The effects of lubricant composition on in vitro wear testing of polymeric acetabular components.

Lubricant composition is known to affect in vitro (simulator) wear of polymeric acetabular components. Clinical acetabular components, fabricated from both ultrahigh molecular weight polyethylene (UHMWPE) and polytetrafluoroethylene (PTFE), were tested against cobalt-chromium 32-mm ball heads, with the use of various lubricants, with different compositions and concentrations of bovine and calf serum as well as hyaluronic acid, in tests which lasted one million cycles. The type of proteins and their relative concentration in the lubricant affected the wear rate of both UHMWPE and PTFE. Increasing protein concentration reduced the UHMWPE wear rate but increased the PTFE wear rate. For a given total protein concentration, increasing the albumin/globulin (A/G) ratio led to a significant reduction in the wear rate for PTFE. A similar but smaller effect was found for UHMWPE. The relative wear-rate ratio between PTFE and UHMWPE depends on both the total protein concentration and the specific protein concentration (albumin/globulin ratio). The average clinical wear rates for both PTFE and UHMWPE and the average wear-rate ratios between them were reproduced when the serum lubricant contained total protein concentration and A/G ratio within normally observed physiological ranges. It is recommended that lubricants for simulator testing be standardized to control total protein content as well as albumin/globulin ratio.

Albumins↗

PubMed2004

Intrinsic adhesion force of lubricants to steel surface.

The intrinsic adhesion forces of lubricants and other pharmaceutical materials to a steel surface were quantitatively compared using Atomic Force Microscopy (AFM). A steel sphere was attached to the tip of an AFM cantilever, and its adhesion forces to the substrate surfaces of magnesium stearate, sodium stearyl fumarate, lactose, 4-acetamidophenol, and naproxen were measured. Surface roughness varied by an order of magnitude among the materials. However, the results clearly showed that the two lubricants had about half the intrinsic adhesion force as lactose, 4-acetamidophenol, and naproxen. Differences in the intrinsic adhesion forces of the two lubricants were insignificant. The lubricant molecules were unable to cover the steel surface during AFM measurements. Intrinsic adhesion force can slightly be modified by surface treatment and compaction, and its tip-to-tip variation was not greater than its difference between lubricants and other pharmaceutical particles. This study provides a quantitative fundamental basis for understanding adhesion related issues.

Adhesiveness↗

PubMed1996

Subchronic delayed neurotoxicity evaluation of jet engine lubricants containing phosphorus additives.

Synthetic polyol-based lubricating oils containing 3% of either commercial tricresyl phosphate (TCP), triphenylphosphorothionate (TPPT), or butylated triphenyl phosphate (BTP) additive were evaluated for neurotoxicity in the adult hen using clinical, biochemical, and neuropathological endpoints. Groups of 17-20 hens were administered the oils by oral gavage at a "limit dose" of 1 g/kg, 5 days a week for 13 weeks. A group of positive control hens was included which received 7.5 mg/kg of one isomer of TCP (tri-ortho-cresyl phosphate, TOCP) on the same regimen, with an additional oral dose of 500 mg/kg given 12 days before the end of the experiment. A negative control group received saline. Neurotoxic esterase (NTE) activity in brain and spinal cord of hens dosed with the lubricating oils was not significantly different from saline controls after 6 weeks of treatment. After 13 weeks of dosing, NTE was inhibited 23 to 34% in brains of lubricant-treated hens. Clinical assessments of walking ability did not indicate any differences between the negative control group and lubricant-treated hens. Moreover, neuropathological examination revealed no alterations indicative of organophosphorus-induced delayed neuropathy (OPIDN). In hens treated with the positive control, significant inhibition of NTE was observed in brain and spinal cord at both 6 and 13 weeks of dosing; this group also demonstrated clinical impairment and pathological lesions indicative of OPIDN. In conclusion, the results of the present study indicated that synthetic polyol-based lubricating oils containing up to 3% TCP, TPPT, or BTP had low neurotoxic potential and should not pose a hazard under realistic conditions of exposure.

Acetylcholinesterase↗