SEARCH · PubMed Health

Results for “Structure”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources

PubMed1992

Comparison of the NMR solution structure with the X-ray crystal structure of the activation domain from procarboxypeptidase B.

The NMR solution structure of the activation domain isolated from porcine procarboxypeptidase B is compared with the X-ray crystal structure of the corresponding segment in the intact proenzyme. For the region of the polypeptide chain that has a well-defined three-dimensional structure in solution, i.e., the backbone atoms of residues 11-76 and 25 amino acid side chains in this segment that form a hydrophobic core in the activation domain, the root-mean-square distance between the two structures is 1.1.A. There are no significant differences in average atom positions between the two structures, but only the NMR structure shows increased structural disorder in three outlying loops located along the same edge of the activation domain. These regions of increased structural disorder in the free domain coincide only partially with the interface to the enzyme domain in the proenzyme.

Amino Acid Sequence↗

PubMed1981

A computer method for construction of secondary structure from polynucleotide sequence. Possible structure of the bacterial replication origin.

A computer method to search the possible secondary structure of a long polynucleotide was developed. As a criterion for the stabilization of a secondary structure, free energy originating from base-pairing was employed, since the structure in solution would be at the free energy minimum. The method is summarized as follows: all possible helices are collected from a given nucleotide sequence under restrictions that the length of a helix is greater than N0 bases (e.g., four bases) and the free energy of the helix calculated according to free energies of two successive sequence-dependent basepairs is lower than E0 (e.g., -5 kcal/mol). The search of secondary structures of low free energy is performed by connecting one helix to another without allowing any base-pairing between loops. For connecting single-stranded regions, destabilizing free energy of 2--3 kcal/mol is added. The method was first applied to several tRNAs and the clover-leaf structure of tRNA was obtained as a free energy minimum. Then, possible secondary structures of the replication origin regions of the Escherichia coli and Salmonella typhimurium chromosomes were examined by the method, assuming that one of the strands in the origin region takes a specific secondary structure. The lowest-energy structure for the E. coli origin was found to be approximately identical to that for the S. typhimurium origin region.

Base Sequence↗

PubMed1986

Water structure in vitamin B12 coenzyme crystals. II. Structural characteristics of the solvent networks.

The geometrical details of the solvent structure in vitamin B12 coenzyme crystals with respect to hydrogen bonding and nonbonded contacts, are described. The individual H-bond geometries varied over wide ranges, similar to those observed in small molecule structures. Large deviations from tetrahedral coordination were found around a majority of the waters. The mutual positions and orientations of the water molecules could not be adequately explained in terms of the H-bonding relationships present in the structure. However, additional investigations, which focused on the short range nonbonded contacts around water positions in a variety of crystal hydrates, revealed several structural regularities (Savage, 1986b). These features relate to the nonbonded O...O, H...O, and H...H interactions, and give rise to a set of repulsive restrictions that are seen to be very much stronger stereochemical restraints than those associated with H-bonding. The short-range restrictions appear largely to govern the local orientational correlations and packing arrangements of the water structure within the coenzyme (and other hydrate) crystals. In more general terms, the inclusion of the nonbonding relationships as well as the attractive H-bonding interactions, leads to a significant increase in our understanding of water structure(s). The repulsive restrictions can be used as stereochemical restraints in the interpretation and refinement of solvent structures within larger hydrate systems, such as protein crystals. They may also be included in potential functions used to simulate solvent structures in aqueous solutions and hydrate systems.

Hydrogen Bonding↗

PubMed1991

Three-dimensional structure of murine anti-p-azophenylarsonate Fab 36-71. 2. Structural basis of hapten binding and idiotypy.

Comparison between the structures and solvent-accessible surfaces of the antigen-binding fragments of two murine anti-p-azophenylarsonate monoclonal antibodies, one bearing a major cross-reactive idiotype of A/J strain mice (36-71) and one lacking the idiotype (R19.9; Lascombe et al., 1989), highlight the structural basis for the determination of hapten affinity and idiotypy. Since the sequence of R 19.9 is identical with the germline-encoded sequence at 16 positions in both heavy-chain and light-chain variable regions where somatic mutations and junctional differences have occurred to produce the 36-71 sequence, the structure of R 19.9 can be used to model the structure of the germline-encoded antibody (36-65) in the regions around these sites. These 16 sequence differences exclude the third heavy-chain complementarity-determining region because R 19.9 utilizes a D gene segment not associated with the predominant idiotype, which is 4 residues longer than the canonical D gene segment utilized in the sequences of 36-71 and 36-65. This difference between the structures of R 19.9 and 36-71 does not affect the validity of using the structure of R 19.9 to model the structure of 36-65 since the third heavy-chain complementarity-determining region is highly solvent-exposed in both 36-71 and R 19.9, and does not interact with any of these 16 sites. Comparing the structures of 36-71 and R 19.9 suggests that only three of the differences in the heavy-chain sequences, and three of the differences in the light-chain sequences of 36-71 and 36-65, increase the affinity for hapten.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗

PubMed1986

Three-dimensional structure of the kringle sequence: structure of prothrombin fragment 1.

The three-dimensional structure of bovine prothrombin fragment 1 has been solved at 2.8-A resolution. The electron density clearly reveals four disulfide bridges along with more than 80% of the side chains completely in density, which correspond faithfully to the kringle sequence, its preceding 30 residues, and the dodecapeptide carboxy terminal; the polysaccharide and the first 35 residues of the amino terminal of fragment 1 are disordered or about 40% of the structure. The folding of the kringle sequence is based upon close disulfide van der Waals contacts between Cys-87-Cys-127 and Cys-115-Cys-139 (4.1 A between midpoints of the bridges), two antiparallel strands of highly conserved (113-118, 124-129) beta-structure, and the stacking of some conserved aromatic residues, all near the center of the folded structure. Moreover, the overall folding appears to be duplicated as a pair of stacked duplex loops with an antiparallel open loop. The overall shape of the kringle structure approximates an eccentric oblate ellipsoid of dimensions 11 X 28 X 30 A. The residues immediately preceding the kringle are dominated by alpha-helical structure (Phe-41-Cys-48; Leu-56-Glu-63). Residues Phe-41-Trp-42 and Tyr-45, which are conserved in factor IX, factor X, protein C, and protein Z, form another aromatic stacked cluster while the Cys-48-Cys-61 disulfide loop corresponds to the well-known alpha/beta structural unit. The dodecapeptide carboxy-terminal interkringle chain extends along the periphery of the kringle in its plane and forms a beta-structure with the kringle-closing Ser-140-Val-143 tetrapeptide.

Amino Acid Sequence↗

PubMed1988

A study of the structure of human complement component factor H by Fourier transform infrared spectroscopy and secondary structure averaging methods.

Fourier transform infrared spectroscopy was used to investigate the secondary structure of human complement component factor H in H2O and 2H2O buffers. The spectra show a broad amide I band which after second-derivative calculations is shown to be composed of three components at 1645, 1663, and 1685 cm-1 in H2O and at 1638, 1661, and 1680 cm-1 in 2H2O. The frequencies of these components are consistent with the existence of an extensive antiparallel beta-strand secondary structure. The exchange properties of the amide protons of factor H as measured in 2H2O buffers are rapid and lead to an estimate of NH proton nonexchange that is comparable with those for small globular proteins. Human factor H is constructed from a linear sequence of 20 short consensus repeats with a mean of 61 residues in each one. To investigate the secondary structure further, secondary structure predictions were carried out on the basis of an alignment scheme for 101 sequences for these repeats as found in human factor H and 12 other proteins. These predictions were averaged in order to improve the reliability of the calculations. Both the Robson and the Chou-Fasman methods indicate significant beta-structural contents. Residues 21-51 in the 61-residue repeat show a clear prediction of four strands of beta-structure and four beta-turns. A structural model based on antiparallel beta-strands in the secondary structure is proposed and discussed.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗

PubMed1990

Secondary structure of the mammalian 70-kilodalton heat shock cognate protein analyzed by circular dichroism spectroscopy and secondary structure prediction.

Heat shock proteins are rapidly synthesized when cells are exposed to stressful agents that cause protein damage. The 70-kDa heat shock induced proteins and their closely related constitutively expressed cognate proteins bind to unfolded and aberrant polypeptides and to hydrophilic peptides. The structural features of the 70-kDa heat shock proteins that confer the ability to associate with diverse polypeptides are unknown. In this study, we have used circular dichroism (CD) spectroscopy and secondary structure prediction to analyze the secondary structure of the mammalian 70-kDa heat shock cognate protein (hsc 70). The far-ultraviolet CD spectrum of hsc 70 indicates a large fraction of alpha-helix in the protein and resembles the spectra one obtains from proteins of the alpha/beta structural class. Analysis of the CD spectra with deconvolution methods yielded estimates of secondary structure content. The results indicate about 40% alpha-helix and 20% aperiodic structure within hsc 70 and between 16-41% beta-sheet and 21-0% beta-turn. The Garnier-Osguthorpe-Robson method of secondary structure prediction was applied to the rat hsc 70 amino acid sequence. The predicted estimates of alpha-helix and aperiodic structure closely matched the values derived from the CD analysis, whereas the predicted estimates of beta-sheet and beta-turn were midway between the CD-derived values. Present evidence suggests that the polypeptide ligand binding domain of the 70-kDa heat shock protein resides within the C-terminal 160 amino acids [Milarski, K. L., & Morimoto, R. I. (1989) J. Cell Biol. 109, 1947-1962].(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗

PubMed1996

Structures of five sulfated hexasaccharides prepared from porcine intestinal heparin using bacterial heparinase. Structural variants with apparent biosynthetic precursor-product relationships for the antithrombin III-binding site.

Porcine intestinal heparin was extensively digested with Flavobacterium heparinase and size-fractionated by gel chromatography. Subfractionation of the hexasaccharide fraction by anion exchange high pressure liquid chromatography yielded 10 fractions. Six contained oligosaccharides derived from the repeating disaccharide region, whereas four contained glycoserines from the glycosaminoglycan-protein linkage region. The latter structures were reported recently (Sugahara, K., Tsuda, H., Yoshida, K., Yamada, S., de Beer, T., and Vliegenthart, J.F.G. (1995) J. Biol. Chem. 270, 22914-22923). In this study, the structures of one tetra- and five hexasaccharides from the repeat region were determined by chemical and enzymatic analyses as well as 500-MHz 1H NMR spectroscopy. The tetrasaccharide has the hexasulfated structure typical of heparin. The five hexa- or heptasulfated hexasaccharides share the common core pentasulfated structure delta HexA(2S) alpha 1-4GlcN-(NS, 6S) alpha 1-4IdoA alpha/GlcA beta 1-4GlcN(6S) alpha 1-4GlcA beta 1-4GlcN (NS) with one or two additional sulfate groups (delta HexA, GlcN, IdoA, and GlcA represent 4-deoxy-alpha-L-threo-hex-4-enepyranosyluronic acid, D-glucosamine, L-iduronic acid, and D-glucuronic acid, whereas 2S, 6S and NS stand for 2-O-, 6-O-, and 2-N-sulfate, respectively). Three components have the following hitherto unreported structures: delta HexA(2S) alpha 1-4GlcN(NS, 6S) alpha 1-4GlcA beta 1-4GlcN(NS, 6S) alpha 1-4GlcA beta 1-4GlcN(NS,6S), delta HexA(2S) alpha 1-4GlcN(NS, 6S) alpha 1-4IdoA alpha 1-4GlcNAc(6S)-alpha 1-4GlcA beta 1-4GlcN(NS, 3S), and delta HexA(2S) alpha 1-4GlcN-(NS,6S) alpha 1-4IdoA (2S) alpha 1-4GlcNAc(6S) alpha 1-4GlcA beta 1-4GlcN(NS, 6S). Two of the five hexasaccharides are structural variants derived from the antithrombin III-binding sites containing 3-O-sulfated GlcN at the reducing termini with or without a 6-O-sulfate group on the reducing N,3-disulfated GlcN residue. Another contains the structure identical to that of the above heptasulfated antithrombin III-binding site fragment but lacks the 3-O-sulfate group and therefore is a pro-form for the binding site. Another has an extra sulfate group on the internal IdoA residue of this pro-form and therefore can be considered to have diverged from the binding site in the biosynthetic pathway. Thus, the isolated hexasacharides in this study include the three overlapping pairs of structural variants with an apparent biosynthetic precursor-product relationship, which may reflect biosynthetic regulatory mechanisms of the binding site.

Animals↗

PubMed1994

Structures of monosialyl oligosaccharides isolated from the respiratory mucins of a non-secretor (O, Lea+b-) patient suffering from chronic bronchitis. Characterization of a novel type of mucin carbohydrate core structure.

Mucin glycopeptides were prepared from the respiratory mucus of a non-secretor, chronic bronchitis patient with blood group O, Le(a)+b-. Oligosaccharides were released by alkaline borohydride treatment and purified by anion-exchange chromatography, size-exclusion chromatography and high-performance liquid chromatography on a silica-bonded alkylamine column. Structural studies employed 500-MHz 1H-NMR spectroscopy and fast atom bombardment-mass spectrometry. Twenty-six monosialyl oligosaccharides, ranging in size from di- to octasaccharide, were fully characterized in this study. The sialic acid occurs either alpha(2-->3)- or alpha(2-->6)-linked to a galactosyl residue, or alpha(2-->6)-linked to GalNAc-ol. In keeping with the non-secretor status of the patient, no structures with an alpha(-->2)-linked fucose residue were found. Nine of the structures had fucose present in alpha(-->3) linkage, either in the Le(x) determinant or in the sialyl-Le(x) determinant, or both (structure 11). Only one oligosaccharide (structure 3b) was seen with fucose alpha (1-->4)-linked in the Le(a) determinant. Eight structures isolated from the mucins of the non-secretor patient had not been found previously in the respiratory mucins of secretor individuals; they are listed below. Among these, structure 4 alpha represents a novel type of mucin carbohydrate core structure.

Bronchi↗

PubMed1988

Stability of RNA stem-loop structure and distribution of non-random structure in the human immunodeficiency virus (HIV-I).

The stability of potential RNA stem-loop structures in human immunodeficiency virus isolates, HTLV-III and ARV, has been calculated, and the relevance to the local significant secondary structures in the sequence has been tested statistically using a Monte Carlo simulation method. Potentially significant structures exist in the 5'non-coding region, the boundary regions between the protein coding frames, and the 3' non-coding region. The locally optimal secondary structure occurring in the 5' terminal region has been assessed using different overlapping segment sizes and the Monte Carlo method. The results show that the most favorable structure for the 5' mRNA leader sequence of HIV has two stem-loops folded at nucleotides 5-104 in the R region (stem-loop I, 5-54 and stem-loop II, 58-104). A large fluctuation of segment score of the local optimal secondary structure also occurs in the boundary between the exterior glycosylated protein or outer membrane protein and transmembrane protein coding region. This finding is surprising since no RNA signals or RNA processing are expected to occur at this site. In addition, regions of the genome predicted to have significantly more open structure at the RNA level correlate closely with hypervariable sites found in these viral genomes. The possible importance of local secondary structure to the biological function of the human immunodeficiency virus genome is discussed.

Base Sequence↗

PubMed1993

Implications of the three-dimensional structure of astacin for the structure and function of the astacin family of zinc-endopeptidases.

Astacin, a zinc-endopeptidase from the crayfish Astacus astacus L., represents a structurally distinct group of metalloproteinases termed the 'astacin family'. This protein family includes oligomeric membrane-bound proteins with zinc proteinase domains found in rodent kidneys (meprins A and B) and human small intestine (N-benzoyl-L-tyrosyl-4-aminobenzoate hydrolase). Another branch of this family comprises morphogenetically active proteins, which induce bone formation (human bone morphogenetic protein 1), or which play specific roles during the embryonic development of amphibians, fishes, echinoderms, and insects. The X-ray crystal structure of astacin has recently been solved to a resolution of 0.18 nm [Bode et al. (1992) Nature 358, 164-167]. This structure is different from hitherto known metalloendopeptidase structures and has been used in the present study to analyze the structures of the other members of the astacin protein family. Computer-assisted modelling of the proteolytic domain of the alpha-subunit of meprin A based on the astacin structure is possible if five single and one double residue deletions and three single residue insertions are implied. The proteinase domains of the other astacins can be included in the model-based sequence alignment by introducing additionally three insertions and one deletion. All of these insertions and deletions are observed in loop segments connecting regular secondary structure elements and should leave the overall structure unaltered. The topology of residues forming the zinc-binding active site of astacin corresponds to almost identical arrangements in all other astacins, suggesting that these are likewise metalloproteinases. Based on this similarity, it is proposed that the active-site metal ion of the astacins is penta-coordinated by three histidine residues, a tyrosine residue and a water molecule in a trigonal bipyramidal geometry. Other remarkable common features are a hydrophobic cluster in the N-terminal domain and a conserved, solvent-filled cavity buried in the C-terminal domain. Most interestingly, the amino-termini of all astacins can be modelled to start in a corresponding internal water cavity as seen in the astacin template, where the terminal alanine residue forms a water-linked salt bridge to Glu103, directly adjacent to His102, the third zinc ligand. Therefore, an activation mechanism for the astacins reminiscent of that of the trypsin-like proteinases had been suggested, which now seems to be probable also for the other astacins. Besides these common traits, there are some minor differences which may have important consequences on the function of the astacins.(ABSTRACT TRUNCATED AT 400 WORDS)

Amino Acid Sequence↗

PubMed1986

Structural-functional relationships along the distal nephron.

The distal tubule, which includes the thick ascending limb (TAL), the macula densa, and the distal convoluted tubule (DCT), and the collecting duct are structurally heterogeneous, thus reflecting the functional heterogeneity that is also present. As the TAL ascends from medulla to cortex, the surface area of the apical plasma membrane increases while that of the basolateral membrane decreases. The structure of the DCT resembles that of the medullary TAL. An excellent correlation exists between structure, Na-K-ATPase activity, and NaCl reabsorptive capacity in the distal tubule. The collecting duct is subdivided into the initial collecting tubule (ICT), and cortical (CCD), outer medullary (OMCD), and inner medullary (IMCD) collecting ducts. Between the distal tubule and the collecting duct is a transition region termed the connecting segment or connecting tubule (CNT). Considerable structural heterogeneity exists along the collecting duct within the two major cell populations, the intercalated cells and the principal cells. In the CNT, the ICT, and the CCD, potassium loading and mineralocorticoids stimulate Na-K-ATPase activity and cause proliferation of the basolateral membrane of CNT cells and principal cells, thus identifying the cells responsible for mineralocorticoid-stimulated potassium secretion in these regions. Finally, at least two morphologically distinct populations of intercalated cells exist, types A and B. In the rat, type A predominates in the CNT and the OMCD and is believed to be responsible for H+ secretion, at least in the OMCD. Type B predominates in the CCD, where it may be involved in bicarbonate secretion.

Animals↗

PubMed1996

Secondary structure prediction and unrefined tertiary structure prediction for cyclin A, B, and D.

We present heuristic-based predictions of the secondary and tertiary structures of cyclins A, B, and D, representatives of the cyclin superfamily. The list of suggested constraints for tertiary structure assembly was left unrefined in order to submit this report before an announced crystal structure for cyclin A becomes available. To predict these constraints, a master sequence alignment over 270 positions of cyclin types A, B, and D was adjusted based on individual secondary structure predictions for each type. We used new heuristics for predicting aromatic residues at protein-protein interfaces and to identify sequentially distinct regions in the protein chain that cluster in the folded structure. The boundaries of two conjectured domains in the cyclin fold were predicted based on experimental data in the literature. The domain that is important for interaction of the cyclins with cyclin-dependent kinases (CDKs) is predicted to contain six helices; the second domain in the consensus model contains both helices and a beta-sheet that is formed by sequentially distant regions in the protein chain. A plausible phosphorylation site is identified. This work represents a blinded test of the method for prediction of secondary and, to a lesser extent, tertiary structure from a set of homologous protein sequences. Evaluation of our predictions will become possible with the publication of the announced crystal structure.

Amino Acid Sequence↗

PubMed1995

Crystal structure of recombinant triosephosphate isomerase from Bacillus stearothermophilus. An analysis of potential thermostability factors in six isomerases with known three-dimensional structures points to the importance of hydrophobic interactions.

The structure of the thermostable triosephosphate isomerase (TIM) from Bacillus stearothermophilus complexed with the competitive inhibitor 2-phosphoglycolate was determined by X-ray crystallography to a resolution of 2.8 A. The structure was solved by molecular replacement using XPLOR. Twofold averaging and solvent flattening was applied to improve the quality of the map. Active sites in both the subunits are occupied by the inhibitor and the flexible loop adopts the "closed" conformation in either subunit. The crystallographic R-factor is 17.6% with good geometry. The two subunits have an RMS deviation of 0.29 A for 248 C alpha atoms and have average temperature factors of 18.9 and 15.9 A2, respectively. In both subunits, the active site Lys 10 adopts an unusual phi, psi combination. A comparison between the six known thermophilic and mesophilic TIM structures was conducted in order to understand the higher stability of B. stearothermophilus TIM. Although the ratio Arg/(Arg+Lys) is higher in B. stearothermophilus TIM, the structure comparisons do not directly correlate this higher ratio to the better stability of the B. stearothermophilus enzyme. A higher number of prolines contributes to the higher stability of B. stearothermophilus TIM. Analysis of the known TIM sequences points out that the replacement of a structurally crucial asparagine by a histidine at the interface of monomers, thus avoiding the risk of deamidation and thereby introducing a negative charge at the interface, may be one of the factors for adaptability at higher temperatures in the TIM family. Analysis of buried cavities and the areas lining these cavities also contributes to the greater thermal stability of the B. stearothermophilus enzyme. However, the most outstanding result of the structure comparisons appears to point to the hydrophobic stabilization of dimer formation by burying the largest amount of hydrophobic surface area in B. stearothermophilus TIM compared to all five other known TIM structures.

Amino Acid Sequence↗

PubMed1993

Modeling the structure of Pyrococcus furiosus rubredoxin by homology to other X-ray structures.

The three-dimensional structure of rubredoxin from the hyperthermophilic archaebacterium, Pyrococcus furiosus, has been modeled from the X-ray crystal structures of three homologous proteins from Clostridium pasteurianum, Desulfovibrio gigas, and Desulfovibrio vulgaris. All three homology models are similar. When comparing the positions of all heavy atoms and essential hydrogen atoms to the recently solved crystal structure (Day, M. W., et al., 1992, Protein Sci. 1, 1494-1507) of the same protein, the homology model differ from the X-ray structure by 2.09 A root mean square (RMS). The X-ray and the zinc-substituted NMR structures (Blake, P. R., et al., 1992b, Protein Sci. 1, 1508-1521) show a similar level of difference (2.05 A RMS). On average, the homology models are closer to the X-ray structure than to the NMR structures (2.09 vs. 2.42 A RMS).

Amino Acid Sequence↗

PubMed1993

Representing an ensemble of NMR-derived protein structures by a single structure.

The usefulness of representing an ensemble of NMR-derived protein structures by a single structure has been investigated. Two stereochemical properties have been used to assess how a single structure relates to the ensemble from which it was derived, namely the distribution of phi psi torsion angles and the distribution of chi 1 torsion angles. The results show that the minimized average structure derived from the ensemble (a total of 11 ensembles from the Brookhaven Protein Data Bank were analyzed) does not always correspond well with this ensemble, particularly for those ensembles generated with a smaller number of experimentally derived restraints per residue. An alternative method that selects the member of the ensemble which is closest to the "average" of the ensemble has been investigated (a total of 23 ensembles from the Brookhaven Protein Data Bank were analyzed). Although this method selected a structure that on the whole corresponded more closely to the ensemble than did the minimized average structure, this is still not a totally reliable means of selecting a single structure to represent the ensemble. This suggests that it is advisable to study the ensemble as a whole. A study has also been made of the practice of selecting the "best" rather than the most representative member of the ensemble. This too suggests that the ensemble should be studied as a whole. A study of the conformational space occupied by the ensemble also suggests the need to consider the ensemble as a whole, particularly for those ensembles generated with a smaller number of experimentally derived restraints per residue.

Animals↗

PubMed1996

Improving the quality of NMR and crystallographic protein structures by means of a conformational database potential derived from structure databases.

A new conformational database potential involving dihedral angle relationships in databases of high-resolution highly refined protein crystal structures is presented as a method for improving the quality of structures generated from NMR data. The rationale for this procedure is based on the observation that uncertainties in the description of the nonbonded contacts present a key limiting factor in the attainable accuracy of protein NMR structures and that the nonbonded interaction terms presently used have poor discriminatory power between high- and low-probability local conformations. The idea behind the conformational database potential is to restrict sampling during simulated annealing refinement to conformations that are likely to be energetically possible by effectively limiting the choices of dihedral angles to those that are known to be physically realizable. In this manner, the variability in the structures produced by this method is primarily a function of the experimental restraints, rather than an artifact of a poor nonbonded interaction model. We tested this approach with the experimental NMR data (comprising an average of about 30 restraints per residue and consisting of interproton distances, torsion angles, 3JHN alpha coupling constants, and 13C chemical shifts) used previously to calculate the solution structure of reduced human thioredoxin (Qin J, Clore GM, Gronenborn AM, 1994, Structure 2:503-522). Incorporation of the conformational database potential into the target function used for refinement (which also includes terms for the experimental restraints, covalent geometry, and nonbonded interactions in the form of either a repulsive, repulsive-attractive, or 6-12 Lennard-Jones potential) results in a significant improvement in various quantitative measures of quality (Ramachandran plot, side-chain torsion angles, overall packing). This is achieved without compromising the agreement with the experimental restraints and the deviations from idealized covalent geometry that remain within experimental error, and the agreement between calculated and observed 1H chemical shifts that provides an independent NMR parameter of accuracy. The method is equally applicable to crystallographic refinement, and should be particular useful during the early stages of either an NMR or crystallographic structure determination and in cases where relatively few experimental restraints can be derived from the measured data (due, for example, to broad lines in the NMR spectra or to poorly diffracting crystals).

Computer Simulation↗

PubMed1990

Crystal structures of subtilisin BPN' variants containing disulfide bonds and cavities: concerted structural rearrangements induced by mutagenesis.

The X-ray structures of four genetically engineered disulfide variants of subtilisin have been analyzed to determine the energetic and structural constraints involved in inserting disulfide bonds into proteins. Each of the engineered disulfides exhibited atypical sets of dihedral angles compared with known structures of natural disulfide bridges in proteins and affected its local structural environment to a different extent. The disulfides located in buried regions, Cys26-Cys232 and Cys29-Cys119, induced larger changes than did Cys24-Cys87 and Cys22-Cys87, which are located on the surface of the molecule. An analysis of the concerted changes in secondary structure units such as alpha-helices and beta-sheets indicated systematic long-range effects. The observed changes in the mutants were largely distributed asymmetrically around the inserted disulfides, reflecting different degrees of inherent flexibility of neighboring secondary structure types. The disulfide substitution in each variant molecule created some invaginations or cavities, causing a reorganization of the surrounding water structure. These changes are described, as well as the changes in side chain positions of groups that border the cavities.

Base Sequence↗