PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “BORIC ACID”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources

Separation of aracytidine and cytidine by capillary electrophoretic techniques.

Aracytidine (cytarabine, 1-beta-D-arabinofuranosylcytosine) is a synthetic analog of cytidine in which ribose is substituted by arabinose; it is used as a drug for the treatment of leukemia. A fast and reliable capillary electrophoretic method for the analysis of cytarabine and cytidine is described. The procedure utilizes the interactions with sodium dodecyl sulfate (SDS) micelles and borate, present in the background electrolyte, for the mobilization and selective separation of the analytes. The detection is carried out by UV absorbance at 275 nm. The method was applied both to pharmaceutical preparations and human serum. Analysis of an untreated serum requires 15 min; the detection limit is 0.8 microgram/mL and the relative standard deviation (RSD) is 5.3%.

Boric Acids↗

Do DNA gel electrophoretic mobilities extrapolate to the free-solution mobility of DNA at zero gel concentration?

The electrophoresis of small DNA fragments has been measured in dilute agarose and polyacrylamide gels cast and run in Tris-acetate-EDTA (TAE) and Tris-borate-EDTA (TBE) buffers. Ferguson plots were constructed to extrapolate the mobilities to zero gel concentration and estimate the free solution mobility of DNA. In polyacrylamide gels, in both TAE and TBE buffers, the extrapolated mobilities at zero gel concentration increased gradually with decreasing DNA molecular weight, went through a maximum at approximately 60 bp, and then decreased again. The increase in the extrapolated mobilities with decreasing molecular weight observed for DNA fragments > or = 60 bp can be attributed to transient interactions between the migrating DNA molecules and the polyacrylamide gel fibers. If such interactions are eliminated by extrapolating the mobilities to both zero gel concentration and zero DNA molecular weight, the apparent free solution mobility of DNA is found to be 3.1 x 10(-4) cm2 V(-1) s(-1) in TAE buffer and 4.2 x 10(-4) cm2 V(-1) s(-1) in TBE buffer at 20 degrees C, reasonably close to the actual free solution mobilities measured in the same two buffers by capillary electrophoresis (N. C. Stellwagen et al., Biopolymers 1997, 42, 687-703). The significantly larger electrophoretic mobility observed in TBE buffer is most likely due to the formation of nonspecific, highly charged deoxyribose-borate complexes in this buffer medium. For DNA molecules < or = 60 bp in size, the decrease in the extrapolated mobilities with decreasing molecular weight parallels the decrease in their free solution mobilities observed by capillary electrophoresis. In agarose gels, the extrapolated mobilities of small DNA molecules at zero gel concentration appear to be independent of molecular weight. The apparent free solution mobilities are found to be (3.0 +/- 0.1) x 10(-4) cm2 V(-1) s(-1) in TAE buffer and (3.2 +/- 0.1) x 10(-4) cm2 V(-1) s(-1) in TBE buffer. The very similar mobilities observed in the two buffer media suggest that the borate ions in TBE buffer primarily form complexes with the galactose residues in the agarose gel fibers, rather than with the migrating DNA molecules, because of mass action effects. The formation of borate-agarose complexes, increasing the net negative charge of the agarose gel fibers, appears to be responsible for the markedly increased electroendosmotic flow observed in agarose gels cast and run in TBE buffer (N. C. Stellwagen, Electrophoresis 1992, 13, 601-603).

Acetates↗

Apparent pore size of polyacrylamide gels: comparison of gels cast and run in Tris-acetate-EDTA and Tris-borate-EDTA buffers.

The electrophoretic mobilities of DNA molecules in three different molecular weight ladders were measured in polyacrylamide gels containing different acrylamide concentrations (%T) and cross-linker ratios (%C), cast and run in Trisacetate-EDTA (TAE) buffer. The apparent pore radius of each gel was estimated from Ferguson plots of the relative mobilities of each of the DNA molecules, using the mobility of the monomer fragment in each molecular weight ladder as the reference mobility. The effective size of each of the DNA molecules was estimated from its radius of gyration. The apparent gel pore radii calculated in this manner ranged from 21 nm in gels containing 10.5%T, 5%C to 200 nm in gels with 4.6%T, 2%C, similar to the values observed for polyacrylamide gels cast and run in Tris-borate-EDTA (TBE) buffer (Holmes and Stellwagen, Electrophoresis 1991, 12, 612-619). Hence, the effective pore size of polyacrylamide gels is essentially independent of whether the gels are cast and run in TAE or TBE buffer.

Acetates↗

Evaluation of the physical properties of crown dental porcelain and the effect of newly developed anti-binding additive.

A colloidal silica-based substitute for the water added to dental porcelain has been developed which restricts rounding on firing and gives greater and indefinitely prolonged unfired biscuit strength. In conjunction with product evaluation, it has been found that both the modulus of rupture and the diametrical tensile strength of dental porcelains can be measured with a high degree of precision.

Borates↗

A continuous reactor system for production of lactulose.

A continuous reactor process was developed to produce lactulose from lactose. A system of two CSTRs in series with a tubular finishing reactor gave conversion to lactulose of about 76%. The reactors ran at 71-75 degrees C with a volumetric hold-up in the CSTRs of 22.7 dm3 and in the tubular reactor of 2.6 dm3. Each CSTR had a nominal residence time of 44 min. The flow rate was 0.53 dm3 min-1.

Biotechnology↗

Degradation kinetics of (+/-)-4'-ethyl-2-methyl-3-(1-pyrrolidinyl)propiophenone hydrochloride (HY-770) and structure-stability relationship among its analogues in aqueous solution.

The kinetics and pathways for degradation of (+/-)-4'-ethyl-2-methyl-3-(1-pyrrolidinyl)propiophenone hydrochloride (HY-770; 1), a newly developed muscle-relaxing agent, and its analogues were studied in aqueous solution at 50 degrees C, ionic strength 0.5 M, and pH 8.0-12.0. Compound 1 and its four analogues followed pseudo-first-order degradation kinetics at constant pH and temperature. From the analysis of the pH degradation-rate profiles, it is evident that specific hydroxide ion-catalyzed degradations of ionized and un-ionized species occur for 1 and its structural analogue, 3'-fluoro-2-methyl-3-(1-pyrrolidinyl)propiophenone hydrochloride (HN-961; 5). The hydroxide ion-catalyzed degradation of the ionized species was found to be 100 times faster than that of the un-ionized species and to be the major process at pH less than 9.0. On the contrary, 1 was extremely stable in 0.5 M HCl at 50 degrees C, suggesting that the hydronium ion-catalyzed degradation and the spontaneous degradation of the ionized species is negligible. The Arrhenius plot for the degradation of 1 at 35-50 degrees C and pH 9.0 showed that the apparent energy of activation was 22.0 kcal/mol. The degradation rates of the five structural analogues were significantly dependent on the electron withdrawing effect of the benzene substituents of the molecule.

Boric Acids↗

A modified hot borate method significantly enhances the yield of high-quality RNA from cotton (Gossypium hirsutum L.).

The isolation of biologically active RNA from cotton (Gossypium hirsutum L.) is difficult due to interference by high levels of endogenous phenolics, polysaccharides, and secondary metabolites. A modified hot borate procedure was developed to combat these cellular constituents during tissue homogenization, resulting in the quantitative recovery of RNA suitable for hybridization analysis, in vitro translation, and cDNA synthesis. The efficacy of several hot borate buffer adjuvants for the qualitative and quantitative recovery of leaf RNA was monitored by absorbance spectra, gel electrophoresis, protein, and cDNA synthesis. Of the buffer adjuvants evaluated, polyvinylpyrrolidone-40 (PVP-40) exhibited the single, most significant impact on the yield and quality of RNA isolated from cotton leaves, although inclusion of deoxycholate and/or Nonident-40 (NP-40) further enhanced the quality of the RNA. The unsurpassed qualitative and quantitative recovery of total RNA from cotton by hot borate buffer at alkaline pH, supplemented with PVP-40, deoxycholate, and/or NP-40 had also proven satisfactory for other recalcitrant plant species as well as for especially difficult tissue types.

Boric Acids↗

Dityrosine: preparation, isolation, and analysis.

This article describes chromatographic and spectroscopic techniques that have multiple applications in the preparation, isolation, and analysis of dityrosine. A three-step chromatographic procedure facilitates the preparation of 120 mg or more (yield > 26% of theoretical maximum) of dityrosine from the enzyme-catalyzed oxidation of tyrosine. DEAE-cellulose chromatography performed in a boric acid-sodium borate buffer removes most of the contaminating pigments. Two-dimensional pH-dependent chromatography on BioGel P-2 separates dityrosine from tyrosine, residual pigments, salts, etc. Elemental analysis indicates that the purified product is approximately 92% dityrosine by weight. Fast atom bombardment mass spectrometry and two types of reverse-phase high-performance liquid chromatography (HPLC), monitored in fluorescence and absorbance measurements, verify the purity of the dityrosine. The distinctive pH-dependent chromatography of dityrosine on BioGel P-2, with reversible adsorption to the matrix occurring at pH values less than 3, is useful for the isolation of varying quantities of dityrosine and for analysis per se. Affinity chromatography on immobilized phenyl boronate (Matrex Gel PBA-60) is an alternate method for the isolation and determination of dityrosine, which undergoes specific interactions with the boronate moiety and possible hydrophobic association with the phenyl group. Two new reverse-phase HPLC techniques expedite the analysis of picomole quantities of dityrosine. One employs isocratic elution (92% H2O, 8% acetonitrile, and 0.1% trifluoroacetic acid) of an ODS II Spherisorb column, with both fluorometric and spectrophotometric detection. The other procedure may be performed in conjunction with total amino acid analysis. A rapid gradient program, developed with a Phenomenex Ultracarb 20 column, clearly separates dabsylated dityrosine and tyrosine from other dabsylated amino acids. It is especially useful when dityrosine is a trace component.

Boronic Acids↗

A new biochemical assay in the diagnostic management of nasal cerebrospinal fluid leakage.

A new method for the detection of cerebrospinal fluid (CSF) leakage is described, and is a refinement of the method originally reported by Oberascher and Arrer in 1986. Immuno-electrophoretic measurements are performed in a two-buffer system, making the test easier to do and providing qualitatively better images. Genetic variants of transferrin (which has a general population incidence of 2-4%) can be discriminated from false-positive test results in affected families. The test described is recommended as the method of choice for initial screening of suspected CSF leakage.

Adult↗