SEARCH · PubMed Health

Results for “Polymers”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources

PubMed1999

Electrochemical sensor for measurement of urea and creatinine in serum based on ac impedance measurement of enzyme-catalyzed polymer transformation.

Enzyme-catalyzed polymer transformation with electrochemical ac impedance detection has been employed for the measurement of urea and creatinine in serum samples. A polymer, based on poly(methylvinyl ether)/maleic anhydride modified by esterification with n-octanol, which is stable at pH 7.4 and which is transformed rapidly in response to alkaline pH changes, was linked to enzymatic reactions between urease and urea or creatinine deiminase and creatinine to produce a disposable sensor system. The polymer was screen-printed onto interdigitated screen-printed carbon electrodes and the electrodes overlaid with absorbent pads containing the relevant enzyme. Application of serum samples, "spiked" with either urea or creatinine, resulted in rapid polymer transformation, and resultant changes in the capacitance of the polymer-coated electrodes were analyte-concentration dependent. Additional information on the mechanisms of polymer transformation was obtained from dynamic quartz crystal microbalance measurements.

Catalysis↗

PubMed2006

Polymer-induced flip-flop in biomembranes.

This Account describes the ability of amphiphilic polymers (e.g., EO/PO/EO block copolymers) and polycations [e.g., quaternized poly(4-vinylpyridine)] to accelerate translocation from the inside leaflet to the outside leaflet ("flip-flop") within vesicle bilayer membranes. Driving forces and mechanisms of flip-flop catalyzed by the nonionic and cationic polymers are different. The nonionics are bound to the biological membrane via incorporation of their hydrophobic blocks into the inner part of the lipid bilayer occupied by the hydrocarbon chains. The resulting scrambling of lipid molecules is favored by the overall hydrophobicity of the copolymer and the volume of its hydrophobic block. External binding of the cationic polymers, on the other hand, is driven by electrostatic interactions between the positively charged polymer units and the negatively charged lipid headgroups within the outside leaflet. Electrostatic binding favors both the flip-flop of anionic lipid from the inner to outer leaflet and the formation of anionic domains in the outer leaflet. When it is considered that less than 1% of the liposome surface is occupied by certain bound polymers, their effect upon membrane dynamics, as will be described herein, is considerable. A distinct correlation has been found between the "flippase" activity of the polymers and their ability to mediate drug permeation through biomembranes.

Catalysis↗

PubMedDate not supplied

Growth of large polymer-actin complexes.

Polymer-actin complexes as large as 10-50 microm with filamentous, branched, stranded, and ring shapes are obtained when fluorescent phalloidin-labeled F-actin is mixed with some synthetic polymers carrying positive charges such as poly-L-lysine, x,y-ionene bromide polymers. All growth of these complexes occurs cooperatively at some certain critical polymer concentrations, regardless of the chemical structure of the polymer, while the morphology of the complexes is substantially influenced by the chemical structure of the polymer. Poly-Lys-actin complex grows preferentially along the filament axis even above the critical concentration. 3,3-ionene-actin complexes show completely homogeneous filaments below the critical concentration but forms bundles at a higher concentration. Occasionally, ring shape complexes can be observed in the 6,6-ionene-actin complex.

Actins↗

PubMedDate not supplied

Synthesis of linear, beta-cyclodextrin-based polymers and their camptothecin conjugates.

6(A),6(D)-Bis-(2-amino-2-carboxylethylthio)-6(A),6(D)-dideoxy-beta-cyclodextrin 1, a diamino acid derivative of beta-cyclodextrin, is synthesized and condensed with difunctionalized PEG comonomers to give linear, high molecular weight (M(w) over 50 kDa) beta-cyclodextrin-based polymers (2-4) with pendant functionality (carboxylate). 2-4 are all highly soluble in aqueous solutions (over 200 mg/mL). 20-O-trifluoroglycinylcamptothecin, 5a, and 20-O-trifluoroglycinylglycinylglycinylcamptothecin, 5b, are synthesized and conjugated to 2 to give polymer-camptothecin (CPT) prodrugs. The solubility of CPT is increased by more than three orders of magnitude when it is conjugated to 2. The rates of CPT release from the conjugates HGGG6 (high molecular weight polymer (M(w) 97 kDa), glyglygly linker and 6 wt % CPT loading) and HG6 (high MW polymer (M(w) 97 kDa), gly linker and 6 wt % CPT loading) in either mouse or human plasma are dramatically accelerated over the rates of pure hydrolysis at pH = 7.4, indicating the presence of enzymatic cleavage as a rate-determining step at this pH in the release of the CPT. The pH of aqueous solution has a large effect on hydrolysis rate of CPT from HGGG6 and HG6; the lower the pH, the slower the rate in the range at 4.1 <or= pH <or= 13.1. The IC(50)'s of polymer 2e, CPT, and the CPT conjugates HG6 and HGGG6 are found to be cell-line dependent with LS174T, HT29, A2780, and PC3 cells using in vitro MTT assays. The parent polymer 2e has very low toxicity to all cultured cells tested.

Animals↗

PubMedDate not supplied

Immobilization of lipid vesicles on polymer support via an amphiphilic peptidic anchor: application to a membrane enzyme.

To immobilize lipid vesicles on a polymer support, we have used a peptidic anchor with the following sequence: Ala-Ala-Leu-Leu-Leu-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-A la-Ala-Ala-Ala-Ala-Ala-Ala-Trp-Lys-Lys-Lys-Lys-Lys-Lys. This amphiphilic peptide was previously designed in our group to interact spontaneously and strongly with vesicles without perturbing their permeability. At the end of the solid-phase peptide synthesis, the peptide was left on the polymer beads and this novel polymer-peptide system was used for vesicle immobilization. It was shown that this polymer-peptide system could immobilize as much as 200 micromol of lipids per gram of dry resin. The amount of immobilized vesicles was decreased by a reduction of the proportion of the negatively charged lipids in the vesicles, indicating the importance of electrostatic interactions in the immobilization of the vesicles. The integrity of the vesicles was mostly preserved after the immobilization. This new polymer-peptide system was used easily and successfully to immobilize a membrane-bound enzyme, gamma-glutamyl transpeptidase. The activity of the membrane-bound enzyme was studied by monitoring the release of p-nitroaniline. The activity of the enzyme was still retained, even after being re-used eight times, indicating the strong immobilization of the enzyme in its active form. The polymer-peptide support could be regenerated by washing with ethanol and reused.

Amino Acid Sequence↗

PubMedDate not supplied

Complex formation of protein with different water-soluble synthetic polymers.

The formation of protein-polymer complexes was studied in an aqueous system using dynamic light scattering (DLS) and static light scattering (SLS) as the main experimental tools. Human serum albumin (HSA) was used as a protein and complexed with four representative water-soluble polymers: poly(N-isopropylacrylamide) (PNIPA), poly(ethylene glycol) (PEG), poly(vinyl pyrrolidone) (PVP), and poly(vinyl alcohol) (PVA). The first three molecular weights were within 420,000-540,000 and the last one was 270,000. The complexation was performed at 25 degrees C in 0.01 M NaCl solution adjusted to pH 3 with HCl as a function of mixing ratio (rm; molar ratio of polymer to HSA). From SLS experiments, we determined the molecular weight of the resulting complexes, from the value of which the number (nb) of bound proteins per polymer was estimated. It was found that each polymer forms an intrapolymer complex over a wide range of rm (1.2 > or = rm > or = 0.01). Then, a marked decrease in nb with increasing rm was found. Over the whole rm range, the HSA-PNIPA complex exhibited a large nb value, as compared with the other three complexes whose nb values at the same rm were close to one another. Both the hydrodynamic radius (Rh) by DLS and the radius of gyration (Rg) by SLS for the complexes of PNIPA, PVP, and PVA decreased and then reached a constant value as nb decreased with increasing rm. In the PEG system, however, there were a few changes in Rh and Rg with nb. The Rg/Rh ratio, as an indication of chain expansion, was found to increase with decreasing nb in the PNIPA system. The complexes of PVA and PVP displayed a similar tendency, although the magnitude of the increasing trend was smaller than that of the PNIPA complex. In contrast, the Rg/Rh ratio of the PEG complex hardly varied depending on nb. These results were discussed in connection with the differences of physicochemical properties among four water-soluble polymers.

Acrylic Resins↗

PubMedDate not supplied

Polarity and motility of large polymer-actin complexes.

The polarity of polymer-actin complexes obtained by mixing F-actin with synthetic polymers carrying positive charges such as poly(L-lysine), x,y-ionene bromide polymers, and poly(N-[3-(dimethylamino)propyl]acrylamide) (PDMAPAA-Q) have been investigated. Actin complexes formed with poly(L-lysine) and PDMAPAA-Q, which carry charges on their side chains, show a higher polarity than those formed with x,y-ionene bromide polymers, which have charges on their chain backbones. All these polymer-actin complex gels show motility on the surfaces coated with myosin by coupling to adenosine 5'-triphosphate hydrolysis. A linear correlation between the polarity of polymer-actin complex gels and the motility is observed.

Acrylic Resins↗

PubMed2006

Poly(sebacic acid-co-ricinoleic acid) biodegradable injectable in situ gelling polymer.

The investigated polymers, poly(sebacic acid-co-ricinoleic acid) containing > or =70% ricinoleic acid, may be injected via a 22 gauge needle and become gel upon contact with aqueous medium, both in vitro and in vivo. Various properties of the polymers including viscosity, thermal analysis, and in vivo behavior, before and after exposure to aqueous medium, were determined. These polymers were observed using scanning electron microscopy (SEM) at dry and wet states. It was found that the viscosity and melting temperature of P(SA:RA) increased after exposure to buffer. The viscosity at 37 degrees C of P(SA:RA)3:7 had the highest increase: from 4200 cP before to 8940 cP after exposure to buffer; in the case of P(SA:RA)25:75 before exposure to buffer the viscosity was 1150 cP while after it raised to 3200 cP. The viscosity of P(SA:RA)2:8 also increased from 400 cP before exposure to buffer to 1000 cP after. On the other hand polymer without sebacic acid, (poly(ricinoleic acid)), did not show gelation properties. Thermal analysis also showed an increase in the melting point of the polymers exposed to the aqueous medium during the first 24 h of incubation. Images obtained by SEM showed formation of a three-dimensional network in polymers exposed to buffers. When injected into animals, P(SA:RA) forms a solid implant in the injection site already at 8 h postinjection.

Animals↗

PubMedDate not supplied

Conjugation of trypsin by temperature-sensitive polymers containing a carbohydrate moiety: thermal modulation of enzyme activity.

Novel temperature-sensitive polymers containing glucose units in their backbone were synthesized and covalently conjugated to trypsin. A series of copolymers based on N-isopropylacrylamide (NIPAAm) and glucosyoxylethyl methacrylate (GEMA) were prepared by using 4,4'-azobis(4-cyanovaleric acid) as an initiator, which resulted in one terminal carboxylic acid group per polymer chain. The polymers were conjugated to primary amine groups of trypsin with water-soluble carbodiimide as a coupling agent, which led to a star-shaped conformation. The polymer-enzyme conjugation was confirmed and characterized by size exclusion and reversed-phase chromatography. Almost of all amine groups in trypsin available for the conjugation were consumed and, consequently, a very dense layer of copolymers was actually coated around the enzyme surface. The conjugated enzymes exhibited reversible precipitation/resolubilization behaviors over a wide range of temperatures, depending on the content of GEMA in the copolymer. They also demonstrated no detectable self-digestion (autolysis) process, but the unconjugated enzyme showed very severe autolysis that led to a rapid inactivation in aqueous solution. When bovine serum albumin was used as a substrate, the protein substrate was not attacked by the conjugated enzyme, but completely digested by the unconjugated enzyme. This result was presumably caused by a steric repulsion process of the attached polymer chains around the enzyme toward the protein substrate. However, the enzyme retained sufficient activity against a low molecular weight substrate. Interestingly, the conjugated enzymes demonstrated very peculiar enzyme activity-temperature profiles, with two apparent optimal temperatures, indicating that a temperature-controlled collapse and flocculation of the copolymers around the enzyme surface modulated the mass transfer rates of substrate to the active site of the enzyme. The conjugated enzymes also exhibited improved thermal stability with increasing the amount of carbohydrate units in the polymer chain.

Animals↗

PubMed2005

Construction by molecular dynamics modeling and simulations of the porous structures formed by dextran polymer chains attached on the surface of the pores of a base matrix: characterization of porous structures.

Significant increases in the separation of bioactive molecules by using ion-exchange chromatography are realized by utilizing porous adsorbent particles in which the affinity group/ligand is linked to the base matrix of the porous particle via a polymeric extender. To study and understand the behavior of such systems, the M3B model is modified and used in molecular dynamics (MD) simulation studies to construct porous dextran layers on the surface of a base matrix, where the dextran polymer chains and the surface are covered by water. Two different porous polymer layers having 25 and 40 monomers per main polymer chain of dextran, respectively, are constructed, and their three-dimensional (3D) porous structures are characterized with respect to porosity, pore size distribution, and number of conducting pathways along the direction of net transport. It is found that the more desirable practical implications with respect to structural properties exhibited by the porous polymer layer having 40 monomers per main polymer chain, are mainly due to the higher flexibility of the polymer chains of this system, especially in the upper region of the porous structure. The characterization and analysis of the porous structures have suggested a useful definition for the physical meaning and implications of the pore connectivity of a real porous medium that is significantly different than the artificial physical meaning associated with the pore connectivity parameter employed in pore network models and whose physical limitations are discussed; furthermore, the methodology developed for the characterization of the three-dimensional structures of real porous media could be used to analyze the experimental data obtained from high-resolution noninvasive three-dimensional methods like high-resolution optical microscopy. The MD modeling and simulations methodology presented here could be used, considering that the type and size of affinity group/ligand as well as the size of the biomolecule to be adsorbed onto the affinity group/ligand are known, to construct different porous dextran layers by varying the length of the polymeric chain of dextran, the number of attachment points to the base matrix, the degree of side branching, and the number of main polymeric chains immobilized per unit surface area of base matrix. After the characterization of the porous structures of the different porous dextran layers is performed, then only a few promising structures would be selected for studying the immobilization of adsorption sites on the pore surfaces and the subsequent adsorption of the bioactive molecules onto the immobilized affinity groups/ligands.

Adsorption↗

PubMed2006

Macroporous polymer thin film prepared from temporarily stabilized water-in-oil emulsion.

We report a simple and convenient method for fabricating ordered porous structure in a polymeric thin film. A temporarily stabilized water-in-oil emulsion, where aqueous droplets were dispersed in the medium of polymer-organic solvent solution, was utilized for the preparation of porous structure. The water-in-oil emulsion was simply prepared by sonicating the mixture of water and polymer-organic solvent solution without any colloid stabilizer. The growth of aqueous droplets was profoundly retarded by dissolving a small amount of sucrose, selectively soluble in the dispersed phase. The prepared emulsion was recovered onto a substrate through dip-coating and subsequently air-dried to get a well-ordered porous polymer film. The polymer content in the polymer solution phase and the compositional ratio of the aqueous phase to the polymer solution phase was optimized to fabricate well-ordered structures.

Benzene↗

PubMed2006

Energy transfer mediated fluorescence from blended conjugated polymer nanoparticles.

Nanoparticles consisting of a derivative of the blue-emitting conjugated polymer polyfluorene doped with green-, yellow-, and red-emitting conjugated polymers were prepared by a reprecipitation method. The nanoparticles can be described as a system of densely packed chromophores that exhibit efficient energy transfer from the host to the dopant polymers. Fluorescence quenching analysis of the host polymer as a function of the dopant concentration indicates that one energy acceptor molecule can effectively quench 90% of the fluorescence of a nanoparticle consisting of 100-200 host conjugated polymer molecules. A nanoparticle energy transfer model was developed that successfully describes the quenching behavior of a small number of highly efficient energy acceptors per nanoparticle. The fluorescence brightness of the blended polymer nanoparticles was determined to be much higher than that of inorganic quantum dots and dye-loaded silica particles of similar dimensions. The combination of high fluorescence brightness and tunable fluorescence of these blended nanoparticles is promising for ultrasensitive fluorescence-based assays.

Energy Transfer↗

PubMed2006

Effects of chain flexibility on polymer conformation in dilute solution studied by lattice monte carlo simulation.

Effects of chain flexibility on the conformation of homopolymers in good solvents have been investigated by Monte Carlo simulation. Bond angle constraint coupled with persistence length of polymer chains has been introduced in the modified eight-site bond fluctuation simulation model. The study about the effects of chain flexibility on polymer sizes reveals that the orientation of polymer chains under confinement is driven by the loss of conformation entropy. The conformation of polymer chains undergoing a gradual change from spherical iso-diametric ellipsoid to rodlike iso-diametric ellipsoid with the decrease of polymer chain flexibility in a wide region has been clearly illustrated from several aspects. Furthermore, a comparison of the freely jointed chain (FJC) model and the wormlike chain (WLC) model has also been made to describe the polymer sizes in terms of chain flexibility and quasi-quantitative boundary toward the suitability of the models.

Adsorption↗

PubMed1997

Molecular analysis of drug delivery systems controlled by dissolution of the polymer carrier.

Dissolution-controlled drug delivery systems are characterized by a phase erosion of the polymer carrier that is associated with fast or slow dissolution of the macromolecular chains. The molecular nature of the dissolution phenomenon was examined by analyzing the water transport process and the subsequent polymer chain disentanglement that is usually characterized by a snake-like motion of the chain (reptation). The results indicate that the polymer molecular weight, water, polymer and drug diffusion coefficients, equilibrium water concentration in the polymer, and water-polymer interaction parameter can control the mechanism and rate of drug release. A new model for this process was developed, and its predictions are compared with experimental studies of drug delivery from poly(vinyl alcohol)-based systems.

Cimetidine↗

PubMed2005

Rheology of viscoelastic solutions of cationic surfactant. Effect of added associating polymer.

Rheological studies were performed with aqueous salt solutions of viscoelastic cationic surfactant erucyl bis(hydroxyethyl)methylammonium chloride (EHAC) and its mixtures with hydrophobically modified polyacrylamide. The solutions of surfactant itself above the concentration of crossover of wormlike micelles exhibit two regions of rheological response. In the first region, they behave like polymer solutions in semidilute regime characterized by viscoelastic behavior with a spectrum of relaxation times. In the second region, unlike polymer solutions their relaxation after shear is dominated by a single relaxation time. Being composed of "living" micelles, the EHAC solutions easily lose their viscosity at the variation of the external conditions. For instance, heating from 20 to 60 degrees C reduces viscosity by up to 2 orders of magnitude, while added hydrocarbons induce a sudden drop of viscosity by 3-6 orders of magnitude. Polymer profoundly affects the rheological properties of EHAC solutions. The polymer/surfactant system demonstrates a 10,000-fold increase in viscosity as compared to pure-component solutions, the effect being more pronounced for polymer with less blocky distribution of hydrophobic units. A synergistic enhancement of viscosity was attributed to the formation of common network, in which some subchains are made up of elongated surfactant micelles, while others are composed of polymer. At cross-links the hydrophobic side groups of polymer anchor EHAC micelles. In contrast to surfactant itself, the polymer/surfactant system retains high viscosity at elevated temperature; at the same time it keeps a high responsiveness to hydrocarbon medium inherent to EHAC.

Cations↗

PubMed2006

Modeling of protein interactions with surface-grafted charged polymers. Correlations between statistical molecular modeling and a mean field approach.

Ion exchange media involving charge groups attached to flexible polymers are widely used for protein purification. Such media often provide enhanced target protein purity and yield. Yet, little is understood about protein interaction with such media at the molecular level, or how different media architectures might affect separation performance. To gain a better understanding of such adsorptive systems, statistical mechanical perturbation calculations, utilizing a Debye-Hückel potential, were performed on surface-grafted charged polymers and their interaction with model proteins. The studied systems were weakly charged, and the polymers were linear and relatively short (degree of polymerization is 30). Segment distributions from the surface were also determined. The interaction of spherical model protein particles of 12-30 A radius were investigated with respect to polymer grafting density, distance from matrix surface, protein charge, and ionic strength. The partitioning coefficient of the model proteins was determined for different distances from the surface. An empirical mean field theory that scales the entropy of the protein with the square of the protein radius correlates well to Monte Carlo statistical modeling results. Upon adsorption to the polymer layers, the model proteins exhibit a critical surface charge density that is proportional to the ionic strength, independent of the grafting density, and appears to be a fundamental determinant of protein adsorption. Partitioning of protein-like nanoparticles to the charged polymer surface is only favored above the particle critical charge density.

Ions↗

PubMed1999

Polymer molecular weight alters properties of pH-/temperature-sensitive polymeric beads.

PURPOSE: To study the physical and release properties of different molecular weight (MW) pH- and temperature-responsive statistical terpolymers and beads of N-isopropylacrylamide (NIPAAm), butylmethacrylate (BMA) and acrylic acid (AA). METHODS: Random terpolymers of varying MW were synthesized with NIPAAm/BMA/AA of feed mol ratio 85/5/10. Polymeric beads were formed by dropping a polymer solution into an oil bath kept at a temperature above the lower critical solution temperature (LCST) of the polymer. The release profile of cytochrome c was investigated as a function of the polymer MW and pH of the release medium at 37 degrees C. RESULTS: The weight average MW ranged between 49,000 and 3 million. The LCST at pH 2.0 and pH 7.4 was 22 degrees C and 60 degrees C respectively. SEM studies showed that the size of the pores decreased as the MW increased. Irrespective of MW, the polymeric beads did not swell or dissolve at pH 2.0 and 37 degrees C and showed minimal drug release. At pH 7.4 and 37 degrees C, the rate of bead dissolution/swelling decreased as the MW of the polymer increased. CONCLUSIONS: By modulating polymer MW, it was possible to vary the physical properties of beads. Dissolution/swelling characteristics were dependent on the MW of the polymer. Such unique dissolution/swelling properties are useful for delivering drugs to different sites in the intestine.

Acrylates↗

PubMed1992

The influence of polymer glass transition temperature and molecular weight on drug release from tablets containing poly(DL-lactic acid).

Five molecular weight grades of poly(DL-lactic acid) were characterized using gel permeation chromatography, differential scanning calorimetry, and viscometry to determine the effect of molecular weight on the glass transition temperature and the intrinsic viscosity. In addition, dynamic mechanical thermal analysis was used to assess the dynamic storage modulus and the damping factor of the polymer samples by detecting motional and structural transitions over a wide temperature range. Significant relationships were found between the molecular weight and these polymer properties. The five grades of poly(DL-lactic acid) were also incorporated as binders into matrix tablet formulations containing the model drug theophylline and microcrystalline cellulose. Dissolution studies showed significant correlations between the properties of the polymer and the matrix release profiles of the tablets. The release of theophylline slowed down progressively as the polymer molecular weight increased. The differences in release became less significant and reached a limiting asymptotic value as the molecular weight increased to 138,000. Further, tablet index testing was utilized to determine the compaction properties of the polymer granulations. Although there was no correlation with the molecular weight of PLA, brittle fracture index testing indicated very low brittleness for all granulations tested. However, bonding index determinations correlated very well with both the physical-mechanical properties of the polymer and drug release profiles.

Biomechanical Phenomena↗