SEARCH · PubMed Health

Results for “APATITES”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61Linked to original sources

PubMed1984

Intraluminal calcium hydroxyapatite crystals in breast carcinoma: an ultrastructural study.

Sixty-three breast carcinomas were examined by electron microscopy to determine the frequency of calcium hydroxyapatite (apatite) within tumor lumina. Twenty-one adenocarcinomas contained apatite in intracytoplasmic and/or intercellular lumina. Well-differentiated tumors exhibited a higher incidence of apatite (44%), while only 20% of the poorly differentiated tumors contained apatite (gamma = +.22). There was no apparent correlation between the presence of apatite and a positive estrogen receptor assay. Ninety-eight adenocarcinomas of other than breast origin (previously processed for electron microscopy) were examined, revealing 2 cases containing apatite in the appropriate locations. The tissue of origin in one case was determined to be ovarian, while the origin of the second case remains undetermined. The ultrastructural finding of apatite in lumina of adenocarcinoma appears to be unusual in that it has only been observed in breast carcinomas and certain ovarian tumors. The presence of apatite within the lumen in addition to other characteristics of an adenocarcinoma may suggest the breast as the primary site.

Breast Neoplasms↗

PubMed1994

Inhibition of calcium phosphate precipitation by bile salts: a test of the Ca(2+)-buffering hypothesis.

The ability of bile salts to inhibit the precipitation of either calcium hydroxyapatite or its precursor, amorphous calcium phosphate, by reducing Ca2+ activity or poisoning nascent crystals was determined. When apatite precipitated rapidly (1-4 h), glycocholate and taurine-conjugated bile salts (up to 100 mM) had little effect on apatite formation, but prevented amorphous calcium phosphate precipitation by lowering Ca2+ activity. In contrast, glycodeoxycholate and glycochenodeoxycholate (2-3 mM) inhibited apatite formation for at least 24 h by poisoning embryonic apatite. When apatite precipitated slowly (> 24 h), all the dihydroxy bile salts prevented apatite formation for at least 4 days. At constant initial supersaturation, the phosphate concentration determined the degree of inhibition caused by the six bile salts mixed together in physiologic proportion. At low phosphate concentrations (1.2 mM) total inhibition was achieved by poisoning embryos (approximately -5 mM total bile salt), but with 4.0 mM phosphate only approximately 60% inhibition was attained (150 mM bile salt) by a combination of poisoning and Ca(2+)-buffering. Thus, at low supersaturation all dihydroxy bile salts can prevent apatite formation by reducing free Ca2+ (taurine and glycine conjugates) or poisoning embryos (glycine conjugates). With mixtures of bile salts at higher supersaturation, inhibition of apatite depends on a combination of poisoning and reduction of free Ca2+, mainly caused by glycodeoxycholate and glycochenodeoxycholate.

Bile Acids and Salts↗

PubMed2005

Dynamic study of calcium phosphate formation on porous HA/TCP ceramics.

Bone-like apatite formation on porous calcium phosphate ceramics was investigated in static simulated body fluid (SBF) and dynamic SBF at different flowing rates. The results of a 14-day immersion in static SBF showed that the formation of bone-like apatite occurred both on the surface and in the pores of the samples. When SBF flowed at the physiological flow rate in muscle (2 ml/100 ml.min), bone-like apatite could be detected only in internal surface of the pores of samples. The result that bone-like apatite formation could only be found in the pores when SBF flowed at physiological flow rate was consistent with that of porous calcium phosphate ceramics implanted in vivo: osteoinduction was only detected inside the pores of the porous calcium phosphate ceramics. This result implicates that the bone-like apatite may play an important role in the osteoinduction of Ca-P materials. The dynamic model used in this study may be better than usually used static immersion model in imitating the physiological condition of bone-like apatite formation. Dynamic SBF method is very useful to understand bone-like apatite formation in vivo and the mechanism of ectopic bone formation in calcium phosphate ceramics.

Apatites↗

PubMed2006

Specific response of osteoblast-like cells on hydroxyapatite layer containing serum protein.

Accelerations of bone-like apatite deposition and cell growth on an electrically polarized ceramic hydroxyapatite have been reported. A relationship between these phenomena was investigated in a previous report, and then it was suggested that osteoblast-like cell's (MC3T3-E1) growth had relevance to the mineral growth. The effect of the formed apatite layer especially appeared to be on the cell adhesion. The acceleration of cell proliferation on the polarized HAp has been shown using fibroblastic cell (L929) and nerve cell (SK-N-SH) lines, therefore the effect of the layer on L929 and SK-N-SH was investigated to support the mechanism of acceleration of cell proliferation by polarization of HAp. In this study, the effect of the bone-like apatite layer was not confirmed on L929 cell's growth. On the other hand, the acceleration of nerve cell's proliferation was confirmed on the formed apatite layer. However, the remarkable improvement of the cell adhesion of SK-N-SH was not confirmed on the apatite layer. Consequently, it was considered that the bone-like apatite containing serum protein obtained by the coprecipitation of bone-like apatite and serum protein has a pronounced role only in the activity of osteoblast-like cells.

3T3 Cells↗

PubMed1996

19F NMR spectroscopy of glass ceramics containing fluorapatites.

Glass ceramics which contain apatite crystals are used as implant materials in medicine. Because most of these glass ceramics are comprised of fluoride-containing glass compositions, the apatites should be fluoride-containing apatites. The fluorine content of these apatites is important for medical applications. The purpose of the current study was to determine the possibilities of measuring the fluorine content of these apatites. High resolution solid state 19F Magic Angle Spinning (MAS) Nuclear Magnetic Resonance (NMR) spectra of apatite-containing glass ceramics have been obtained. Using the correlation between the isotropic 19F chemical shift and the fluorine content, it was possible to determine the fluorine content of the apatites.

Apatites↗

PubMed1983

Study of passed stones by means of X-rays, infrared and thermal analyses.

X-ray powder diffraction, infrared spectroscopy and thermal analysis were used to study 108 stones that had been passed spontaneously from the upper urinary tract. The presence of apatite in pure calcium oxalate stones classified by x-ray diffraction was confirmed by infrared analysis of the ignited product. Consequently, 102 of 108 stones were found to be composed of weddellite and/or whewellite, and apatite. Besides the contents of weddellite, whewellite and apatite, the content of organic matrix also was estimated by thermal analysis in 102 stones, ranging from 1.1 to 17.2 per cent. The stones then were divided into 3 groups according to the principal constituent: 1) weddellite, 2) whewellite and 3) apatite. Weddellite stones were significantly heavier and significantly higher in apatite content than whewellite stones. It is suggested that weddellite calculi tend to become larger than whewellite stones. The apatite content was correlated with the ratio of weddellite to weddellite plus whewellite ( r equals 0.528), and the content of organic matrix was correlated with the whewellite content (r equals 0.708). Thus, it is considered that the weddellite-apatite and whewellite-organic matrix associations have important roles in the development and growth of weddellite and whewellite calculi, respectively.

Apatites↗

PubMed1992

A comparative study of ultrastructures of the interfaces between four kinds of surface-active ceramic and bone.

The interfaces between four kinds of surface-active ceramic and bone were studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) using undecalcified specimens. The materials were Bioglass-type glass (Bioglass), Ceravital-type glass-ceramic (KGS), apatite- and wollastonite-containing glass-ceramic (A-W.GC) and hydroxyapatite (HA). Particles of these materials, ranging between about 100 and 300 microns in diameter, were implanted into rat tibiae, and specimens were prepared for observation at 8 weeks after implantation. All materials were observed to bond to bone through a collagen-free layer consisting of fine apatite crystals distinct from those in bone. The crystals of this apatite layer and those of bone were intermingled at their interface, suggesting chemical bonding. In Bioglass, which had only a glassy phase, several tens of microns of the material surface had changed to such an apatite layer. In KGS and A-W.GC, which had macrocrystals in the glassy phase, an intervening apatite layer about 0.5 micron thick was observed between the materials and bone. Furthermore, fine apatite crystals were also observed among the macrocrystals near the surface of the materials. In HA, which had no glassy phase, an intervening apatite layer was much less distinct and sometimes absent. These differences were considered to be attributable to the differences in chemical composition, crystallization, and solubility of the materials.

Animals↗

PubMed1997

Effects of bone CS-proteoglycans, DS-decorin, and DS-biglycan on hydroxyapatite formation in a gelatin gel.

The small leucine-rich bone proteoglycans, biglycan and decorin, can be purified by chromatography on hydroxyapatite columns, demonstrating their potential affinities for bone apatite. To determine their effects on in vitro apatite formation and growth, a mixture of the chondroitin-sulfate (CS) bone proteoglycans, or purified fractions of the dermatan sulfate (DS) containing proteoglycans, DS-decorin and DS-biglycan obtained from skin and articular cartilage, respectively, were analyzed in a gelatin gel diffusion system in which apatite formation occurs in the absence of proteins in a 3.5 day period. Low concentrations of the bone CS-proteoglycan mixture and low DS-biglycan concentrations (5-25 microg/ml) increased apatite formation relative to proteoglycan-free controls at 3.5 days. The CS-proteoglycan mixture was less effective at 50 microg/ml than at 10 microg/ml. DS-biglycan was similarly most effective at 5-25 microg/ml. At 5 days, when apatite growth and proliferation were assessed, 10 and 50 microg/ml of both CS-bone proteoglycan and DS-biglycan increased mineral yields. DS-decorin, in contrast, had no significant effect on mineral accumulation at any of these concentrations. In seeded growth experiments, 1 and 10 microg/ml CS-proteoglycan and 10 and 50 microg/ml DS-biglycan were significant effective inhibitors of mineral accretion, whereas DS-decorin showed no tendency to inhibit seeded growth. Using molar extinction coefficients to determine concentrations, the binding of DS-biglycan and DS-decorin to apatite (specific surface 54 m2/g) was determined using a Langmuir adsorption isotherm model. DS-biglycan had a greater affinity for apatite than DS-decorin (0.285 ml/micromol versus 0.0098 ml/micromol). DS-biglycan binding was more specific with fewer binding sites (3.5 micromol/m2 compared with 18. 2 micromol/m2 for DS-decorin). Data suggest that of the small proteoglycans, biglycan may play a more significant role than decorin in the regulation of mineralization.

Animals↗

PubMed2004

Dynamic study of calcium phosphate formation on porous HA/TCP ceramics.

Bone-like apatite formation on porous calcium phosphate ceramics was investigated in static simulated body fluid (SBF) and dynamic SBF at different flowing rates. The results of a 14-day immersion in static SBF showed that the formation of bone-like apatite occurred both on the surface and in the pores of the samples. When SBF flow at the physiological flow rate in muscle (2 ml/100 ml min1), bone-like apatite could be detected only in internal surface of the pores of samples. The result that bone-like apatite formation could only be found in the pores when SBF flown at physiological flow rate was consistent with that of porous calcium phosphate ceramics implanted in vivo: osteoinduction was only detected inside the pores of the porous calcium phosphate ceramics. This result implicates that the bone-like apatite may play an important role in the osteoinduction of Ca-P materials. The dynamic model used in this study may be better than usually used static immersion model in imitating the physiological condition of bone-like apatite formation. Dynamic SBF method is very useful to understand bone-like apatite formation in vivo and the mechanism of ectopic bone formation in calcium phosphate ceramics.

Biomimetic Materials↗

PubMed2003

Devitrification of ionomer glass and its effect on the in vitro biocompatibility of glass-ionomer cements.

The effects of devitrification of an ionomer glass with a molar composition 4.5SiO(2).3Al(2)O(3).1.5P(2)O(5).3CaO.2CaF(2) on cement formation and in vitro biocompatibility were investigated. Differential thermal analysis was used to study the phase evolution in the glass, and to determine the heat treatments for production of glass-ceramics. X-ray diffraction patterns from glass frit heat-treated at 750 degrees C for 2h contained peaks corresponding to apatite (JCPDS 15-876), whereas for samples heat-treated at 950 degrees C for 2h apatite and mullite (JCPDS 15-776) were the major phases detected. Transmission electron microscopy (TEM) confirmed that apatite and apatite-mullite phases were present after heat treatments at 750 degrees C and 950 degrees C respectively. Glass and glass-ceramics were ground to prepare <45microm powders and glass ionomer cements were produced using a ratio of 1g powder: 0.2g PAA: 0.3g 10% m/v tartaric acid solution in water. In vitro biocompatibility was evaluated using cultured rat osteosarcoma (ROS) cells. Scanning electron microscopy (SEM) showed that cells colonised the surfaces of cements prepared using untreated ionomer glass and glass crystallised to form apatite (750 degrees C/2h). However, quantitative evaluation using MTT and total protein assays indicated that more cell growth occurred in the presence of cements prepared using ionomer glasses crystallised to apatite than cements prepared using untreated glass. The least cell growth and respiratory activity was observed on cements made with crystallised glass containing both apatite and mullite. It was concluded that the controlled devitrification of ionomer glasses could be used to produce GIC bone cements with improved biocompatibility.

Animals↗

PubMed2005

Fabrication of hydroxyapatite block from gypsum block based on (NH4)2HPO4 treatment.

The aim of this study was to evaluate the feasibility of fabricating low-crystalline, porous apatite block using set gypsum as a precursor based on the fact that apatite is thermodynamically more stable than gypsum. When the set gypsum was immersed in 1 mol/L diammonium hydrogen phosphate aqueous solution at 100 degrees C, it transformed to low-crystalline porous apatite retaining its original shape. The transformation reaction caused a release of sulfate ions due to an ion exchange with phosphate ions, thus leading to a decrease in the pH of the solution. Then, due to decreased pH, dicalcium phosphate anhydrous--which has similar thermodynamic stability at lower pH--was also produced as a by-product. Apatite formed in the present method was low-crystalline, porous B-type carbonate apatite that contained approximately 0.5 wt% CO3, even though no carbonate sources--except carbon dioxide from air--were added to the reaction system. We concluded therefore that this is a useful bone filler fabrication method since B-type carbonate apatite is the biological apatite contained in bone.

Bone Substitutes↗

PubMed2004

Biomimetic polymer/apatite composite scaffolds for mineralized tissue engineering.

The material surface must be considered in the design of scaffolds for bone tissue engineering so that it supports bone cells adhesion, proliferation and differentiation. A biomimetic approach has been developed as a 3D surface modification technique to grow partially carbonated hydroxyapatite (the bonelike mineral) in prefabricated, porous, polymer scaffolds using a simulated body fluid in our lab. For the rational design of scaffolding materials and optimization of the biomimetic process, this work focused on various materials and processing parameters in relation to apatite formation on 3D polymer scaffolds. The apatite nucleation and growth in the internal pores of poly(L-lactide) and poly(D,L-lactide) scaffolds were significantly faster than in those of poly(lactide-co-glycolide) scaffolds in simulated body fluids. The apatite distribution was significantly more uniform in the poly(L-lactide) scaffolds than in the poly(lactide-co-glycolide) scaffolds. After incubation in a simulated body fluid for 30 d, the mass of poly(L-lactide) scaffolds increased approximately 40%, whereas the mass of the poly(lactide-co-glycolide) scaffolds increased by about 15% (see Figure). A higher ionic concentration and higher pH value of the simulated body fluid enhanced apatite formation. The effects of surface functional groups on apatite nucleation and growth were found to be more complex in 3D scaffolds than on 2D films. Surprisingly enough, it was found that carboxyl groups significantly reduced the apatite formation, especially on the internal pore surfaces of 3D scaffolds. These findings are critically important in the rational selection of materials and surface design of 3D scaffolds for mineralized tissue engineering and may contribute to the understanding of biomineralization as well.SEM micrograph of a poly(L-lactide) scaffold.

Apatites↗

PubMed1988

Crystal-collagen relationships in calcified turkey leg tendons visualized by selected-area dark field electron microscopy.

The distribution and orientation of biological apatite crystals in calcified turkey leg tendons were studied by selected-area dark field electron microscopy. This imaging technique enables the direct visualization of apatite and the specific determination of the crystallographic axes (a, b-axes or c-axis) within calcified collagen fibrils. This study shows that at early stages of mineralization, rod-shaped apatite crystals (5-20 nm in length) were localized and dispersed within gap zones bordering both the collagen molecule C- and N-terminal regions. At later stages of mineral deposition the crystals were more extensive, occupying greater areas of the gap zone and, in addition, apatite crystals were found to occur in the overlap zones. The orientation of apatite crystals was observed to be an alternating and interlocking distribution of a, b-axes and c-axis along the axial period of collagen fibrils. This distribution is interpreted as representing a continuous rotation of apatite axial orientation along the collagen period.

Animals↗

PubMed2006

Carbonate release from carbonated hydroxyapatite in the wide temperature rage.

Synthetic carbonated apatite ceramics are considered as promising alternative to auto- and allograft materials for bone substitute. The aim of this study was to investigate the thermal stability of an AB-type carbonated apatite in the wide temperature range. The data on the thermal stability have to allow the conditions of the sintering of the ceramics to be controlled. Initial carbonated apatite powders were prepared by interaction between calcium oxide and ammonium hydrogen phosphate with addition of ammonium carbonate. Decomposition process was monitored by infra red spectroscopy, weight loss and X-ray diffraction of solid, and by infra red analysis of condensed gas phase resulted from the thermal decomposition of the sample in equilibrium conditions. Features of carbon monoxide and carbon dioxide release were revealed. The synthesized AB-type carbonated apatite is started to decompose at about 400 degrees Celsius releasing mainly carbon dioxide, but retained some carbonate groups and apatite structure at the temperature 1100 degrees Celsius useful to prepare porous carbonate-apatite ceramics intended for bone tissue engineering scaffolds.

Apatites↗

PubMed1988

X-ray diffraction and thermal studies of crystals from the outer and inner layers of human dental enamel.

X-ray diffraction showed that crystals from the outer layer had larger crystallite sizes, a-axis length and peak intensities than the inner layer crystals. Upon heating, apatites in both layers showed a contraction of a-axis length and changed their crystallite sizes along the direction of the a-axis independently of changes along the c-axis. The contraction of the a-axis length is attributed to loss of structurally incorporated water from the apatite lattice, causing void formation along the c-axis and altering the crystallite size normal to the c-axis. Whitlockite was detected in samples from both layers at temperatures above 800 degrees C, and the temperature required for whitlockite formation was considered to be influenced by the experimental atmosphere. The peak shift of whitlockite with temperature indicates that the whitlockite initially formed was magnesium rich. As to the amount of structurally incorporated water in both layers' apatites, the a-axis contraction data were inconsistent with the a-axis length data. This inconsistency indicates a larger degree of magnesium substitution in the inner layer apatite. A larger degree of magnesium substitution in apatite would show a smaller crystallite size, a weaker apatite peak intensity and a larger amount of whitlockite formation.

Apatites↗

PubMed2004

Characterization of titanium surfaces with calcium and phosphate and osteoblast adhesion.

The titanium surfaces containing calcium, phosphate ions and the carbonate apatite were characterized. The effect of surface chemistry on the initial rabbit osteoblast response on these surfaces was investigated. The cell count and alkaline phosphatase (ALP) specific activity assay were used for biochemical analyses. Scanning electron microscopy was used for morphology observation and in particular X-ray photoelectron spectroscopy (XPS) for surface chemistry characterization. The number of cells adhering to the apatite coating surface was the maximum, the number of cells on the surface containing calcium without phosphate ions was higher than that containing phosphate without calcium, and the number on the unmodified titanium surface was the least. The osteoblasts cultured on the apatite surface exhibited the highest ALP specific activity, next were the ones on the surface containing solely calcium, the lowest were on the unmodified titanium surface. On the substrate surfaces removed of adhered cells, the order of nitrogen amounts detected by XPS was consistent with ones of ALP specific activity and cell number, except for the unmodified titanium surface. For the substrate surfaces removed of adhered osteoblasts, XPS analysis showed that calcium and phosphorous amounts decreased during cell adhesion. After cell culture the Ca2p binding energy (BE) values for apatite coating and the surface containing solely calcium were similar to those of the two surfaces adsorbed bovine serum albumin (BSA). The P2p BE values for the surfaces containing phosphate ions, including the apatite coating and the surface containing solely phosphate ions, showed the same change. But after cell culture the decrease of the P2p BE value for the coating surface was larger than the one for the surface containing solely phosphate ions. Considering the bovine serum albumin adsorption on the same samples, these results indicated that calcium ions on titanium surfaces play a more important role than phosphate ions in initial interactions among culture medium, osteoblasts and titanium surfaces. On the apatite coating surface, calcium ions are active sites for osteoblast adhesion, while calcium and phosphate ions co-exist on titanium surfaces, the former promotes the osteoblast adhesion onto the phosphate sites on titanium surfaces. The cell adhesion was a complicated biological and chemical process relating to surface several elements similar to protein adsorption.

Animals↗

PubMed2003

Predictive value of kidney stone composition in the detection of metabolic abnormalities.

PURPOSE: To determine if kidney stone composition can predict the underlying medical diagnosis, and vice versa. METHODS: We studied 1392 patients with kidney stones who underwent a complete ambulatory evaluation and who submitted one or more stones for analysis. We ascertained the associations between medical diagnosis and stone composition. RESULTS: The most common kidney stones were composed of calcium oxalate (n = 1041 patients [74.8%]), mixed calcium oxalate-calcium apatite (n = 485 [34.8%]), and calcium apatite alone (n = 146 [10.5%]). The most common medical diagnoses were hypocitraturia (n = 616 patients [44.3%]), absorptive hypercalciuria (n = 511 [36.7%]), and hyperuricosuria (n = 395 [28.4%]). Calcium apatite and mixed calcium oxalate-calcium apatite stones were associated with the diagnoses of renal tubular acidosis and primary hyperparathyroidism (odds ratios >/=2), but not with chronic diarrheal syndromes. As the phosphate content of the stone increased from calcium oxalate to mixed calcium oxalate-calcium apatite, and finally to calcium apatite, the percentage of patients with renal tubular acidosis increased from 5% (57/1041) to 39% (57/146), and those with primary hyperparathyroidism increased from 2% (26/1041) to 10% (14/146). Calcium oxalate stones were associated with chronic diarrheal syndromes, but not with renal tubular acidosis. Pure and mixed uric acid stones were strongly associated with a gouty diathesis, and vice versa. Chronic diarrheal syndromes and uric acid stones were associated with one another, and brushite stones were associated with renal tubular acidosis. As expected, there was a very strong association between infection stones and infection, and between cystine stones and cystinuria. CONCLUSION: Stone composition has some predictive value in diagnosing medical conditions, and vice versa, especially for noncalcareous stones.

Acidosis, Renal Tubular↗

PubMed2002

In vitro bioactivity of a biocomposite fabricated from HA and Ti powders by powder metallurgy method.

Traditionally, hydroxyapatite was used as a coating material on titanium substrate by various techniques. In the present work, a biocomposite was successfully fabricated from hydroxyapatite and titanium powders by powder metallurgy method. Bioactivity of the composite in a simulated body fluid (SBF) was investigated. Main crystal phases of the as-fabricated composite are found to be Ti2O, CaTiO3, CaO, alpha-Ti and a TiP-like phase. When the composite is immersed in the simulated body fluid for a certain time, a poor-crystallized, calcium-deficient, carbonate-containing apatite film will form on the surface of the composite. The time required to induce apatite nucleation is within 2 h. In addition, the apatite is also incorporated with a little magnesium and chlorine element. It is found that Ti2O has the ability to induce the formation of bone-like apatite in the SBF. And a dissolve of the CaO phase could also provide favorable conditions for the apatite formation, by forming open pores on the surface of the composite and increasing the degree of supersaturation of the SBF with respect to the apatite.

Apatites↗