PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Silicon Compounds”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61Linked to original sources

Relation of enamel prism orientation to microtensile bond strength.

PURPOSE: To evaluate the effect of enamel prism orientation on microtensile bond strengths (MTBS) to enamel using two current bonding systems. MATERIALS AND METHODS: The crown segments of extracted human third molars were cut mesio-distally to obtain buccal and lingual halves. One of the halves was cut horizontally at the middle of the crown to make a flat enamel surface parallel to prism orientation (parallel specimen). The other half was ground at the equator of the crown to produce a flat enamel surface perpendicular to the prism orientation (perpendicular specimen). Each surface was ground with 600 grit silicone carbide paper, treated with Clearfil Liner Bond IIsigma (LB) or Single Bond (SB) according to the manufacturers' instructions and resin composite, AP-X or Z100, respectively, was built up onto it. After storage in water at 37 degrees C for 24 hours, all bonded specimens were sectioned and trimmed for measuring MTBS. In MTBS, the parallel specimens were stressed perpendicular to the prism long axis and the perpendicular specimens were stressed parallel to the prism axis. RESULTS: MTBS of specimens stressed perpendicular to the prism long axis were 11.93 +/- 5.56 MPa for LB and 10.97 +/- 1.80 MPa for SB. MTBS of specimens stressed parallel to the prism axis in LB and SB were 19.07 +/- 6.35 MPa and 23.99 +/- 9.20 MPa, respectively. For each prism orientation, no difference in MTBS was found between the bonding systems (P> 0.05). Both systems showed lower MTBS in specimens stressed perpendicular to the prism long axis than in specimens stressed parallel to the prism axis.

Acid Etching, Dental↗

Adsorption of xenobiotics to plastic tubing incorporated into dynamic in vitro systems used in pharmacological research--limits and progress.

Commonly used materials incorporated into dynamic culture systems typically show the feature of adsorption of lipophilic xenobiotics. Yet, this phenomenon is strongly limiting the use of dynamic culture models and ex vivo organ perfusions in pharmacological and toxicological research. The aim of the study was to characterize different materials with respect to their capacity for drug adsorption and to find methods or materials to reduce the loss of substrate by adsorption in order to improve the use of dynamic in vitro systems. The adsorption of different xenobiotics (lidocaine, midazolam, lormetazepam, phenobarbital, testosterone, ethoxyresoroufine) to tubes used in dynamic in vitro systems (polyvinyl-chloride, silicone) were investigated and compared to a new material (silicone-caoutchouc-mixture). In addition, the role of protein deposition onto the tubing was studied and it was investigated whether it was possible to reach saturation of the inner tube surface by pre-loading it with the test compound. We found that silicone tubes provided the highest comfort with respect to handling and reusability, but they also demonstrated the highest capacity for substrate adsorption. Polyvinyl-chloride was the second best in handling but also demonstrated a high complexity in its adsorption behavior. The silicone-caoutchouc-mixture reached acceptable experimental results with respect to its handling and demonstrated a very low capacity for substrate adsorption.

Adsorption↗

Current use of bone substitutes in maxillofacial surgery.

The use of bone substitutes in the field of facial plastic and reconstructive surgery is well established. Because of the complexity of the anatomy in the head and neck region, reconstruction and augmentation of this area pose a challenge to the surgeon. In addition, the shortcomings of autogenous bone, such as resorption and donor site morbidity, have led to the need for alloplastic implants in the field of facial plastic surgery. Multiple alloplastic implants are currently in use today; however, those compounds that contain calcium, silicon, and carbon have been examined more closely in this article. This is because of their ability to osseointegrate and osseoconduct with surrounding fibro-osseous tissue, as well as demonstrate a higher immunogenic tolerance by the human body. The discussion of each compound includes a description of its composition and structure, the advantages and shortcomings of the material, and its current uses in the field of facial plastic and reconstructive surgery. With a better understanding of the available alloplastic implants, the surgeon can make a more informed decision as to which implant would be most suitable in a particular patient.

Bone Morphogenetic Protein 3↗

2',5'-Bis-O-(tert-butyldimethylsilyl)-3'-spiro-5''-(4''-amino-1'',2''- oxathiole-2'',2'-dioxide)pyrimidine (TSAO) nucleoside analogues: highlyselective inhibitors of human immunodeficiency virus type 1 that are targeted at the viral reverse transcriptase.

A series of pyrimidine nucleoside analogues containing [2',5'-bis-O-(tert-butyldimethylsilyl)-3'-spiro-5''-(4''-amino- 1'',2''-oxathiole-2'',2''-dioxide)]-beta-D-ribofuranose as the pentose were found to inhibit human immunodeficiency virus type 1 [HIV-1(IIIB)] replication at a concentration of 0.06-0.8 microM but were not cytotoxic at a 1000- to 10,000-fold higher concentration. These nucleoside derivatives were also effective against various other HIV-1 strains, including those resistant to 3'-azido-3'-deoxythymidine, but not against HIV-2, simian immunodeficiency virus, Moloney murine sarcoma virus, or other RNA or DNA viruses. They proved to be highly specific inhibitors of the RNA-dependent DNA polymerase function of the HIV-1 reverse transcriptase, showing no marked inhibition of the HIV-1 reverse transcriptase-associated DNA-dependent DNA polymerase activity, HIV-2 reverse transcriptase, DNA polymerase alpha, herpes simplex virus 1 DNA polymerase, or Thermus aquaticus DNA polymerase.

Antiviral Agents↗

Effect of surface treatment on fatigue behaviour between Tetric Ceram inlays and Variolink luting composite.

The effect of pre-treatment of composite inlays on bonding performance between a resin composite inlay and a luting composite has not been fully studied. The aim of the present study was to evaluate the influence of three different pre-treatment modes on fatigue bond strength and marginal adaptation. One hundred twenty resin composite discs (Tetric Ceram) were made as simulated inlays and randomly assigned to four groups (n=30): Without treatment (WT), hydrofluoric acid etching for 15 s + silanating (HF), roughening with a silicon carbide bur (SC), and silica coating + silanating (CO). Luting composite cylinders (Variolink II low) were bonded to the discs using Heliobond, and after 24 h in water at 37 degrees C, quasistatic shear bond strengths (n=l) and fatigue bond strengths (n=20; 5,000 cycles) were measured. Thirty-two third molars received occlusomesial Class II cavities (n=8), and direct resin composite inlays were luted with identical methods and materials. Before and after thermomechanical loading (100,000x50 N, 2,500 x +5 degrees C/+55 degrees C), replicas were made and examined (SEM, x200). CO and SC exhibited significantly higher bond strengths and adhesive fatigue limits than HF and WT (P<0.05). After thermomechanical loading, CO (98% continuous margin) and SC (95% continuous margin) demonstrated that they provide significantly more fatigue resistance than HF (88%).

Acid Etching, Dental↗

[Use of silatranes in combination with Vishnevskii'n ointment in wound treatment].

Experiments on rats were performed to study the effect of I-/chlormethyl/silatrane and I-/ethoxy/silatrane as well as that of triethanolamine and /chlormethyl/triethoxysilane on the biochemical characteristics of granular-fibrous tissue. The drugs were applied to the wound in the form of liniments. Silatranes stimulated cell proliferation and raised biosynthetic activity of the cells. They also favoured collagen and non-collagenous protein accumulation and reduced the inflammatory manifestations. The silicon-containing fragment of the silatrane molecule, /chlormethyl/triethoxysilane, produced an analogous but less pronounced action. Triethanolamine containing no silicon appeared to be far less active. These data indicate that the presence of silicon in the silatrane grouping is of great importance for its effective biological function.

Animals↗

Quantitation of 2-ketoacids in biological fluids by gas chromatography chemical ionization mass spectrometry of O-trimethylsilyl-quinoxalinol derivatives.

A very sensitive and specific method of 2-ketoacid determination in various biological fluids using gas chromatography chemical ionization mass spectrometry of O-trimethylsilyl-quinoxalinol derivatives is described. After derivatization with o-phenylenediamine in acidic medium and extraction, the 2-ketoacids, and the 2-ketovaleric acid used as internal standard, are silylated and resolved on a capillary column and their concentrations automatically determined by monitoring the m/z values corresponding to their respective protonated molecular ions, using ammonia as reactant gas. The detection limit is below 50 ng ml-1 of each 2-ketoacid. The recoveries of 2-ketoacids from urine and plasma were between 97 and 104%. Problems encountered with interfering substances were tested for and discussed. This method has been applied successfully to various metabolic disorders characterized by an accumulation of aliphatic 2-ketoacids. The metabolic interrelationship of branched chain 2-ketoacids and other compounds, especially pyruvate, is discussed.

Amniotic Fluid↗

[Silatranes as stimulators of the development of granulation tissue].

Experiments on rats were made to study the effect of I-(chloromethyl) silatrane and I- (ethoxy) silatrane and that of triethanolamine and chloromethyl triethoxysilane on biochemical parameters of granular-fibrous tissue. The preparations were applied to a wound defect in the form of liniments. Silatranes were found to stimulate proliferation of the cells and to increase their biosynthetic activity, to favour accumulation of collagen and non-collagenic proteins, and reduction of the inflammatory phenomena. The silicon-containing fragment of the silatrane molecule chloromethyl triethoxysilane produced an analogous but less marked action. Triethanolamine containing no silicon was found to be as less active. These data indicate that silicon entering the silatrane grouping is of great importance for the occurrence of its biological activity.

Animals↗

Finishing and polishing of the ceromer material Targis. Lab-side and chair-side methods.

UNLABELLED: The aim of the study was to check four lab-side and four chair-side methods for finishing and polishing the ceromer material Targis. Eighty bar-shaped specimens (20 mm x 10 mm x 2 mm) of Vectris were produced; 72 were covered with a 2 mm (thickness) layer of the Ceromer Targis and eight samples with the composite Tetric. All specimens were ground plane parallel with 320 Silicium carbide grit sandpaper in order to start with the same level of roughness. Then the specimens were finished and polished using the following methods: (1) Artglass toolkit, (2) pumice-stone and brushes/linen brush and polishing paste P3, (3) Robinson brush/Ivoclar Universal paste and wool brush, (4) Silicone wheel and rag wheel, (5) Shofu Rainbow set, (6) Sof-Lex discs, (7) Vivadent Politip set and (8) Nupro-pastes and brushes. The surface roughness was determined with a profilometer. The arithmetical roughness value Ra was calculated. From each group one specimen was randomly chosen and sputtered with gold in order to observe the surface with a scanning electron microscope to evaluate its smoothness. The methods were ranked as followed: 2, 3 and 5 with the lowest roughness, then 8, 6, 7, 4, 1. The best ranked chair-side method (5) and the best ranked lab-side methods (2, 3) did not differ significantly between the Ra values. No difference was observed between the composite Tetric and the ceromer Targis when these materials were polished using the same method. CONCLUSION: the lab-side-methods 2 and 3 and the chair-side-method 5 can be recommended for finishing and polishing the new ceromer material Targis.

Carbon Compounds, Inorganic↗

Effect of dentin desensitizers and dentin bonding agents on dentin permeability.

PURPOSE: To determine the effect of dentin desensitizing agents (oxalates and glutaraldehyde) and dentin bonding agents, with and without resin-based composite (RBC) on dentin permeability and morphology of the dentin surface. The influence of saliva and toothbrushing on these agents was also evaluated. MATERIALS AND METHODS: Radicular dentin discs +/-1 mm thick were obtained from extracted human teeth. The thickness of the discs was standardized by grinding them with 600 grit silicon carbide powder. Both pulpal and periodontal surfaces of the discs were treated with 6% citric acid for 2 min prior to the baseline measurement of dentin permeability. Permeability was measured for the discs, using a split-chamber apparatus, at four different time points: at baseline, after treatment with each desensitizing modality, after 24 hrs of saliva immersion and after simulated toothbrushing equivalent to 3 weeks of normal brushing. The treatment modalities were: Sensodyne Dentin Desensitizer, Gluma Dentin Desensitizer, All-Bond DS (primers without etching), Etch+Primers (All-Bond 2 system), Etch+Primers+Adhesive and Etch+Primers+Adhesive+RBC (AElite Flo). Radicular dentin discs were prepared separately for scanning electron microscopy (SEM). One group was left untreated as the control group. Discs in the other groups were treated with the modalities listed above. One disc from each group was viewed under the SEM after treatment with the desensitizing modality. The second disc in each group was viewed after 24 hrs of saliva immersion following desensitizing treatment and the third disc after 3 weeks of simulated toothbrushing following desensitizing treatment and saliva immersion. RESULTS: The greatest reduction in permeability was caused by All-Bond DS followed by Sensodyne Dentin Desensitizer and Etch+Primers+Adhesive+RBC. Gluma Dentin Desensitizer, Etch+Primers, and Etch+Primers+Adhesive did not reduce permeability by a significant amount. Saliva immersion increased permeability significantly only for the Gluma and Etch+Primers+Adhesive groups. There was a trend towards increase in permeability after toothbrushing; however, this increase was not statistically significant for any group (P > 0.05). Thus, placement of primers without etching (All-Bond DS) reduced permeability more than any other treatment modality. These data indicate that etching a sensitive dentin area may be appropriate only if RBC is to be placed in the area. Exposure to saliva and toothbrushing countered the decrease in permeability caused by dedicated desensitizers and dentin bonding agents. The SEM micrographs revealed that in most cases, form corroborated function and the morphology of the dentin surface corresponded to the dentin permeability values.

Acid Etching, Dental↗

Synthesis, structures and reactions of lithium complexes of [(o-RCHC6H4)PPh2=NSiMe3]-(R = H, SiMe3) ligands.

N-Trimethylsilyl o-methylphenyldiphenylphosphinimine, (o-MeC6H4)PPh2=NSiMe3 (1), was prepared by reaction of Ph2P(Br)=NSiMe3 with o-methylphenyllithium. Treatment of 1 with LiBun and then Me3SiCl afforded (o-Me3SiCH2C6H4)PPh2=NSiMe3 (2). Lithiations of both 1 and 2 with LiBu(n) in the presence of tmen gave crystalline lithium complexes [Li{CH(R)C6H4(PPh(2=NSiMe3)-.tmen](3, R = H; 4, R = SiMe3). From the mother liquor of 4, traces of the tmen-bridged complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}]2(mu-tmen) (5) were obtained. Reaction of 2 with LiBun in Et2O yielded complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}.OEt2] (6). Reaction of lithiated with Me2SiCl2 in a 2:1 molar ratio afforded dimethylsilyl-bridged compound Me2Si[CH2C6H4(PPh2=NSiMe3)-2]2 (7). Lithiation of 7 with two equivalents of LiBun in Et2O yielded [Li2{(CHC6H4(PPh2=NSiMe3)-2)2SiMe2}.0.5OEt2](8.0.5OEt2). Treatment of 4 with PhCN formed a lithium enamide complex [Li{N(SiMe3)C(Ph)CHC6H4(PPh2=NSiMe3)-2}.tmen] (9). Reaction of two equivalents of 5 with 1,4-dicyanobenzene gave a dilithium complex [{Li(OEt2)2}2(1,4-{C(N(SiMe3)CHC6H4(PPh2=NSiMe3)-2}2C6H4)] (10). All compounds were characterised by NMR spectroscopy and elemental analyses. The structures of compounds 2, 3, 5, 6 and 9 have been determined by single crystal X-ray diffraction techniques.

Elements↗

[(C5H5)Co(P(O)(OH)2)3H]: a novel organometallic tris-phosphonic acid that dissolves glass to form a six-coordinate silicon complex.

The sodium salt of the tripodal oxygen ligand Na[(C5H5)Co(P(O)(OMe)2)3] (1) reacts with gaseous hydrogen chloride in dichloromethane to give sodium chloride and [(C5H5)Co(P(O)(OMe)2)3H2]Cl (2). Addition of an equimolar amount of 1 leads to precipitation of sodium chloride again to yield the acid form of the ligand [(C5H5)Co(P(O)(OMe)2)3H] (3). Its solid-state structure contains a very short intramolecular OH.O hydrogen bond. The compound hydrolyses in boiling water to give methanol and the title complex [(C5H5)Co(P(O)(OH)2)3H] (4). This complex is a rather strong tris-phosphonic acid (pK(a1) 2.0, pK(a2) 4.0, pK(a3) 6.3, and pK(a4) 9.6). Attempts to grow single crystals of this highly water-soluble yellow crystalline compound lead to the silicon complex [((C5H5)Co[P(O)(OH)2]2[P(O)2(OH)])(2)Si].8 H2O (5). The crystal structure determination shows that it is a molecular complex of two tris-phosphonic acids that each act as a tris-chelating ligand. Additional water molecules form a complex net of hydrogen bonds between the complexes of 5. The SiO6 octahedron is only insignificantly distorted with Si-O bond lengths of 1.78 A. Complex 4 reacts with stoichiometric amounts of potassium carbonate to yield the potassium salt K[(C5H5)Co(P(O)(OH)2)3] (6). The crystal structure of 6 has also been determined. In the solid state it is a two-dimensional coordination polymer with each potassium ion being coordinated by twelve oxygen atoms of six tris-phosphonic acids.

Journal Article↗

[Study of the photoluminescence spectra of laser dye impregnated in porous silicon].

We studied the photoluminescence (PL) of the compound films, which were made by implanting some laser dyes into the porous silicon films, and compared it with the PL of the laser dyes in other states. We also measured the PL of the compound films with different substrates. It was found that the spectra symmetry of the implanted laser dyes is better than that of the dyes in other states. The experimental results suggest that the PL of the compound films mainly comes from the monomers of the implanted laser dyes.

English Abstract↗

Tandem intramolecular silylformylation and silicon-assisted cross-coupling reactions. synthesis of geometrically defined alpha,beta-unsaturated aldehydes.

The palladium- and copper-catalyzed cross-coupling reactions of cyclic silyl ethers with aryl iodides are reported. Silyl ethers 3 were readily prepared by intramolecular silylformylation of homopropargyl silyl ethers 2 under a carbon monoxide atmosphere. The reaction of cyclic silyl ethers 3with various aryl iodides 7 in the presence of [(allyl)PdCl](2), CuI, a hydrosilane, and KF.2H(2)O in DMF at room temperature provided the alpha,beta-unsaturated aldehyde coupling products 8 in high yields. The need for copper in this process suggested that transmetalation from silicon to copper is an important step in the mechanism. Although siloxane 3 and the product 8 are not stable under basic conditions, KF.2H(2)O provided the appropriate balance of reactivity toward silicon and reduced basicity. The addition of a hydrosilane to [(allyl)PdCl](2) was needed to reduce the palladium(II) to the active palladium(0) form.

Aldehydes↗