PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Tooth erosion”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61Linked to original sources
PubMed2005

Role of dentifrices on abrasion of enamel exposed to an acidic drink.

PURPOSE: To evaluate in vitro the abrasive potential of different dentifrices on enamel previously exposed to an acidic soft drink. METHODS: 150 bovine enamel slabs measuring 6 x 3 x 2 mm were grounded flat and polished. Surface roughness was measured to obtain Ra (microm) baseline values using a profilometer. The slabs' outer surface was covered with a tape except for a 3 x 4 mm window. According to a randomized complete block design, specimens were exposed to an acidic drink or distilled water (control) for 5 minutes, and then to artificial saliva for 1 minute. Next, the experimental units were submitted to 5,000 brushing strokes using one of four dentifrices - regular (RE), baking soda (BS), tartar control (TC) or whitening (WT) - or distilled water as control (CO) (n=15). At the end of five repetitions of this erosive/abrasive cycle, the tape was removed and final readings of surface roughness were carried out. Roughness gain consisted of the subtraction of the baseline values from the post-treatment measurements. Also, the enamel wear due to erosive/abrasive challenges was profilometrically determined. RESULTS: ANOVA did not show significant interaction between enamel condition (eroded and sound) and dentifrice (P> 0.05) for both roughness gain and wear. No significant effect was found for enamel condition and dentifrice in the wear analysis. The exposure of enamel to the acidic drink provided higher roughness gain than did distilled water. Tukey's test evidenced that TC yielded significantly greater increase in surface roughness than did both CO and WT, whereas BS and RE induced an intermediate roughness gain.

Analysis of Variance↗
PubMed2005

Tooth wear in the elderly population in South East Local Government area in Ibadan, Nigeria.

It is the aim of this study to determine the pattern and degree of tooth wear in the elderly population in the South East Local Government Area in Ibadan. The study was carried out on 690 elderly individuals who were 65 years old and above, living in various wards in South East Local Government Area, in Ibadan. A multistage sampling technique was used to select elderly individuals for the study. Two interviewers, 2-record clerks and 2 examiners were trained for the study and the examiners were calibrated. The index of Eccles J.D was used to determine the severity of tooth wear. The results highlight the high prevalence of tooth wear, mainly attrition in the elderly in this local government area. Six hundred and forty (92.8%) of the elderly had tooth wear. Of these 58.59% were males and 41.41% females. Attrition was observed in 618 (89.6%) elderly individuals. The mandible exhibited a higher prevalence of tooth wear than the maxilla and was statistically significant. Severe tooth wear was observed in only 5.74% of the teeth whilst moderate and mild tooth wear were observed in 26.91% and 30.88% respectively. Unlike the Western European countries, attrition being the most common type of tooth wear in these elderly individuals suggests that the aetiological factors responsible for tooth wear are different. Common habits such as crushing of bones and chewing of sticks for routine oral hygiene care could be contributing factors to tooth wear in this environment.

Aged↗
PubMed2006

Under our watch.

Explore the source record for details and available documents.

Bruxism↗
PubMed2005

IPR: intraoral pressure-dependent registration in Cerec application.

Cerec 3D software is now able to restore occlusal tooth surfaces safely and reproducibly. With an existing morphology worth adopting and/or by making use of an opposing bite registration, the user can reproduce the central contacts to the opposing jaw with the aid of the correlation mode. However, this assumes that the existing maxillo-mandibular relation is physiological. In prosthetic treatment, it is essential to differentiate between a healthy patient and patients with functional disorders. In the first case, the possibilities of performing an accurate and exact reconstruction of the healthy parameters are given and can be myocentrically controlled and corrected with suitable means. However, in the presence of functional disorders, the pathological situation should not serve at the basis for the reconstruction. Adjustment and, if necessary, stabilization of the function is essential. The following article illustrates by reference to a complex patient case how Cerec restorations can be produced correctly chairside with the aid of the IPR technique even in the case of functional disorders.

Adult↗
PubMedDate not supplied

Maxillary and mandibular overlay removable partial dentures for restoration of worn teeth. A three-year follow-up.

This clinical report describes the fabrication and a three-year follow-up of maxillary and mandibular cast overlay removable partial dentures for the restoration of severely worn dentition with accompanying loss of vertical dimension of occlusion. The frameworks supported porcelain veneers for esthetics, and metal occlusal surfaces for strength and durability.

Chromium Alloys↗
PubMedDate not supplied

An uncommon dental presentation during pregnancy resulting from multiple eating disorders: pica and bulimia: case report.

Pica is a compulsive eating disorder involving non-nutritive substances. The etiology of this eating disorder is unknown but it often is associated with subclinical mineral deficiencies. This article focuses on the simultaneous occurrence of two types of eating disorders, the co-existence of depression during four pregnancies, and the resulting dental clinical implications. The literature is substantial enough to support a possible etiological association between these eating disorders and depression during pregnancy. Associations between eating psychopathology, depression, and anxiety have been described consistently. The diagnosis of pica and the dental treatment related to it are not a common part of most dental practices; knowing the clinical features and detecting the condition depend on careful questioning and diligence. At present, no one has described the physiologic or psychological basis for pica. This article reviews the published literature pertaining to pica, specifically pagophagia.

Bulimia↗
PubMedDate not supplied

Tooth wear among psychiatric patients: prevalence, distribution, and associated factors.

PURPOSE: The purpose of this study was to evaluate the prevalence, distribution, and associated factors of tooth wear among psychiatric patients. MATERIALS AND METHODS: Tooth wear was evaluated using the tooth wear index with scores ranging from 0 to 4. The presence of predisposing factors was recorded in 143 psychiatric patients attending the outpatient clinic at the Prince Rashed Hospital in northern Jordan. RESULTS: The prevalence of a tooth wear score of 3 in at least one tooth was 90.9%. Patients in the age group 16 to 25 had the lowest prevalence (78.6%) of tooth wear. Increasing age was found to be a significant risk factor for the prevalence of tooth wear (P < .005). The occlusal/incisal surfaces were the most affected by wear, with mandibular teeth being more affected than maxillary teeth, followed by the palatal surface of the maxillary anterior teeth and then the buccal/labial surface of the mandibular teeth. The factors found to be associated with tooth wear were age, retirement and unemployment, masseter muscle pain, depression, and anxiety. CONCLUSION: Patients' psychiatric condition and prescribed medication may be considered factors that influence tooth wear.

Adolescent↗
PubMed2006

Noncarious cervical lesions among a non-toothbrushing population with Hansen's disease (leprosy): initial findings.

OBJECTIVE: The purpose of this preliminary investigation was to examine the presence of noncarious cervical lesions (NCCLs) among a convenience sample of non-toothbrushing subjects with Hansen's disease (leprosy). METHOD AND MATERIALS: A cross-sectional sample of 102 non-toothbrushing subjects (20 to 77 years of age) was examined. The clinical parameter of interest for this study was the presence or absence of NCCLs and their probable etiology as it relates to the subjects' diet, occlusion, and use of medication. Subjects were examined clinically and interviewed according to study protocol. RESULTS: NCCLs were found in 48 subjects (47% of the studied sample). Widespread consumption of acidic foods and beverages acting as corrodents, signs of parafunction, and use of medication that causes xerostomia were also noted. Thus, all may be contributing factors in the etiology of NCCLs in this population. CONCLUSION: This preliminary report suggests that toothbrush/dentifrice abrasion was not a factor in the etiology of NCCLs in the population studied. The authors intend to expand their study among these non-toothbrushing

Adult↗
PubMed2006

Clinical evaluation of self-etch adhesives in Class V non-carious lesions.

PURPOSE: To evaluate the clinical performance of two self-etching and one total-etch adhesives in Class V non-carious cervical lesions (NCCL). METHODS: Two self-etching primers, Clearfil SE Bond and Hybrid Bond, and one total etch adhesive, Admira Bond, were placed in 195 NCCL. Restorations were evaluated at baseline, 1 and 2 years using the USPHS criteria. RESULTS: No restoration was lost after 1 and 2 years for all materials. There was no significant difference between the baseline and 2-year results for Admira Bond and Clearfil SE Bond restorations. In contrast, Hybrid Bond restorations showed significant deterioration in marginal adaptation and cavosurface marginal discoloration after 2 years. Also, there was no significant difference between Admira Bond and Clearfil SE Bond at each recall period.

Acid Etching, Dental↗
PubMed2006

One-year clinical evaluation of two resin composites, two polymerization methods, and a resin-modified glass ionomer in non-carious cervical lesions.

AIM: The aim of this study was to examine clinically relevant data on four restorative procedures for non-carious cervical lesions using United States Public Health Service (USPHS)-compatible clinical and photographic criteria and to compare different methods of analyzing clinical data. METHODS AND MATERIALS: Fourteen patients with at least one or two pairs of non-carious lesions under occlusion and a mean age of 50 were enrolled in this study. A total of 56 restorations (14 with each material) were placed by three experienced, calibrated dental practitioners. Two other experienced and calibrated practitioners, under single-blind conditions, followed up on all restorations for a period of one year. Three materials were randomly placed: a micro-hybrid composite with two polymerization methods (G1 and G2), a flowable micro-hydrid composite (G3), and a resin-modified glass ionomer (G4). Statistical analysis was performed using the Kruskall-Wallis test (p<0.05) and a Mann-Whitney U modified test with a corrected significance level. RESULTS: At the one year evaluation time, there were no restorations with secondary caries and the retention rates in G1 (IntenS with a hard polymerization), G2 (IntenS with a soft polymerization), G3 (Filtek flow), and G4 (Fuji II LC) were 85.7% (two losses), 92.8% (one loss), 100%, and 100%, respectively. The total visual comparison of the results at baseline (15 days later) showed significant differences only with the clinical acceptance criterion: G1 was different from G2, with a soft polymerization device (p<0.05). In terms of surface quality at one year, G1, G2, and G3 exhibited a statistically significant difference from G4, p<0.05. The digital analysis at baseline showed significant differences only with the clinical acceptance criterion: G1=G2 was different from G3=G4, p<0.05. At one year, only the microporosity criterion showed any statistical differences: G1=G2=G3 was different from G4, p<0.05. CONCLUSIONS: The resin-modified glass ionomer was easier to use and had a high retention rate, but it failed in terms of surface quality (visual mode) and porosity (digital mode) criteria compared to the others groups. Overall results showed no difference between groups G1 (hard-polymerized) and G2 (soft-polymerized), and only G1 was affected by the marginal edge (p<0.03) and integrity criteria (p<0.02) at one year.

Bisphenol A-Glycidyl Methacrylate↗
PubMedDate not supplied

Impact of tooth wear on daily living.

PURPOSE: The aim of this study was to identify the effects of tooth wear on patients' quality of life and satisfaction with their dentition. MATERIALS AND METHODS: Seventy-six tooth wear patients and 76 control subjects were recruited for the study. A Dental Impact on Daily Living questionnaire was used to assess the affect of tooth wear on daily living and satisfaction with the dentition. An ordinal scale was used to assess the severity of tooth wear in a patient cohort. RESULTS: The results showed that tooth wear has a measurable impact on patients' satisfaction with their appearance, pain levels, oral comfort, general performance, and chewing and eating capacity (P < .001). CONCLUSION: Tooth wear has an impact on patients' satisfaction with their dentition regardless of tooth wear severity or personal factors.

Activities of Daily Living↗