PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Azides”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64Linked to original sources

Photochemical cross-linking of tRNA1Arg to the 30S ribosomal subunit using aryl azide reagents attached to the anticodon loop.

The 2-thiocytidine residue at position 32 of tRNA1Arg from Escherichia coli was modified specifically with three photoaffinity reagents of different lengths, and the corresponding N-acetylarginyl-tRNA1Arg derivatives were cross-linked to the P site of E. coli 70S ribosomes by irradiation. Covalent attachment was dependent upon the presence of a polynucleotide template and exposure to light of the appropriate wavelength. From 4% to 6% of the noncovalently bound tRNA became cross-linked to the ribosome as a result of photolysis, and attachment to the P site was confirmed by the reactivity of arginine in the covalent complexes toward puromycin. Analysis of the irradiated ribosomes by sucrose-gradient sedimentation at low Mg2+ concentration revealed that the tRNA was associated exclusively with the 30S subunit in all cases. Two of the N-acetylarginyl-tRNA1Arg derivatives were attached primarily to ribosomal proteins whereas the third was cross-linked mainly to 16S RNA. Partial RNase digestion of the latter complex demonstrated that the tRNA had become attached to the 3' third of the rRNA molecule. In addition, the tRNA-rRNA bond was shown to be susceptible to cleavage by hydroxylamine and mercaptoethanol.

Anticodon↗

Phenyl azide substituted and benzophenone-substituted phosphonamides of 7-methylguanosine 5'-triphosphate as photoaffinity probes for protein synthesis initiation factor eIF-4E and a proteolytic fragment containing the cap-binding site.

Three photoactive derivatives of the 7-methylguanosine-containing cap of eukaryotic mRNA were used to investigate protein synthesis initiation factor eIF-4E from human erythrocytes and rabbit reticulocytes. Sensitive and specific labeling of eIF-4E was observed with the previously described probe, [gamma-32P]-gamma-[[(4-benzoylphenyl)methyl]amido]-7-methyl-GTP [Blaas et al. (1982) Virology 116, 339; abbreviated [32P]BPM]. A second probe was synthesized that was an azidophenyltyrosine derivative of m7GTP [( 125I]APTM), the monoanhydride of m7GDP with [125I]-N-(4-azidophenyl)-2-(phosphoramido)-3-(4-hydroxy-3-iodop hen yl) propionamide. This probe allowed rapid and quantitative introduction of radioactivity in the last rather than the first step of synthesis and placed the radioactive label on the protein-proximal side of the weak P-N bond. A dissociation constant of 6.9 microM was determined for [125I]APTM, which is comparable to the published values for m7GTP. m7GTP and APTM were equally effective as competitive inhibitors of eIF-4E labeling with [125I]APTM. Like [32P]BPM, [125I]APTM labeled both the full-length (25 kDa) polypeptide and a 16-kDa degradation product, designated eIF-4E*, with labeling occurring in proportion to the amounts of each polypeptide present. A third probe, an azidophenylglycine derivative of m7GTP [( 32P]APGM), the monoanhydride of m7GDP with [32P]-N-(4-azidophenyl)-2-(phosphoramido)acetamide, was also synthesized and shown to label eIF-4E specifically. Unlike [32P]BPM and [125I]APTM, however, [32P]APGM labeled eIF-4E* approximately 4-fold more readily than intact eIF-4E. Tryptic and CNBr cleavage suggested that eIF-4E* consists of a protease-resistant core of eIF-4E that retains the cap-binding site and consists of approximately residues 47-182.

Affinity Labels↗

Synthesis, structural characterization, and Monte Carlo simulation of the magnetic properties of two new alternating MnII azide 2-D honeycombs. Study of the ferromagnetic ordered phase below 20 K.

Reaction of MnII and pyridine derivatives such as 4-methylpyridine (4-Mepy) and 4-ethylpyridine (4-Etpy) led to the new two-dimensional systems trans-[Mn(4-Mepy)2(N3)2]n (1) and trans-[Mn(4-Etpy)2(N3)2]n (2). Compound 1 crystallizes in the triclinic system, P1 group (a = 9.269(2) A, b = 9.635(3) A, c = 18.860(4) A, Z = 4), and compound 2 crystallizes in the monoclinic system, P2(1)/c group (a = 14.416(3) A, b = 8.515(2) A, c = 15.728(4) A, Z = 4). The two compounds show honeycomb structures based on dinuclear Mn-(mu-N3)2-Mn subunits linked to the four nearest-neighbor similar subunits by four end-to-end single azido bridges, but whereas the subunits of compound 1 show the end-to-end Mn-(mu 1,3-N3)2-Mn kind of bridges, compound 2 prefers the end-on Mn-(mu 1,1-N3)2-Mn fragment. Magnetically, compound 1 is an alternating 2-D system with two different antiferromagnetic interactions, whereas compound 2 corresponds to a two-dimensional ferro-antiferromagnetic system showing spin canting and permanent magnetization below 20 K. The coupling constant parameters J1 = -10.1 cm-1, J2 = -4.7 cm-1, and g = 2.019 for 1 and J1 = -5.3 cm-1, J2 = 2.9 cm-1, and g = 2.016 for 2 have been obtained from calculations using the Monte Carlo method based on the Metropolis algorithm.

Journal Article↗

Syntheses, crystal structures, magnetic properties, and EPR spectra of tetranuclear copper(II) complexes featuring pairs of "roof-shaped" Cu2X2 dimers with hydroxide, methoxide, and azide bridges.

Hydroxo- and methoxo-bridged tetranuclear copper(II) complexes of the tetramacrocyclic ligand 1,2,4,5-tetrakis(1,4,7-triazacyclonon-1-ylmethyl)benzene (Ldur), have been prepared from [Cu4Ldur(H2O)8](ClO4)8.9H2O (1). Addition of base to an aqueous solution of 1 gave [Cu4Ldur(mu2-OH)4](ClO4)4 (2). Diffusion of MeOH into a DMF solution of 2 produces [Cu4Ldur(mu2-OMe)4](ClO4)4.HClO4.2/3MeOH (3), a complex which hydrolyzes on exposure to moisture regenerating 2. The structurally related azido-bridged complex, [Cu4Ldur(mu2-N3)4](PF6)4.4H2O.6CH3CN (4), was produced by reaction of Ldur with 4 molar equiv of Cu(OAc)2.H2O and NaN3 in the presence of excess KPF6. Compounds 2-4 crystallize in the triclinic space group P1 (No. 2) with a = 10.248(1) A, b = 12.130(2) A, c = 14.353(2) A, alpha = 82.23(1) degrees, beta = 80.79(1) degrees, gamma = 65.71(1) degrees, and Z = 1 for 2, a = 10.2985(4) A, b = 12.1182(4) A, c = 13.9705(3) A, alpha = 89.978(2) degrees, beta = 82.038(2) degrees, gamma = 65.095(2) degrees, and Z = 1 for 3, and a = 12.059(2) A, b = 12.554(2) A, c = 14.051(2) A, alpha = 91.85(1) degrees, beta = 98.22(1) degrees, gamma = 105.62(1) degrees, and Z = 1 for 4. The complexes feature pairs of isolated dibridged copper(II) dimers with "roof-shaped" Cu2(mu2-X)2 cores (X = OH-, OMe-, N3-), as indicated by the dihedral angle between the two CuX2 planes (159 degrees for 2, 161 degrees for 3, and 153 degrees for 4). This leads to Cu.Cu distances of 2.940(4) A for 2, 2.962(1) A for 3, and 3.006(5) A for 4. Variable-temperature magnetic susceptibility measurements indicate weak antiferromagnetic coupling (J = -27 cm(-1)) for the hydroxo-bridged copper(II) centers in 2 and very strong antiferromagnetic coupling (J = -269 cm(-1)) for the methoxo-bridged copper(II) centers in 3. Pairs of copper(II) centers in 4 display the strongest ferromagnetic interaction (J = 94 cm(-1)) reported thus far for bis(mu2-1,1-azido)-bridged dicopper units. Spectral measurements on a neat powdered sample of 4 at 33.9 GHz or 90 Ghz confirm the spin-triplet ground state for the azido-bridged copper(II) pairs.

Journal Article↗

Reaction of m-terphenyldichlorophosphanes with sodium azide: synthesis and characterization of stable azidocyclophosphazenes.

Reaction of the m-terphenyldichlorophosphanes 2,6-(2-MeC(6)H(4))(2)C(6)H(3)PCl(2) (1), 2,6-(4-t-BuC(6)H(4))(2)C(6)H(3)PCl(2) (2), or 2,6-Mes(2)C(6)H(3)PCl(2) (3) with excess NaN(3) in acetonitrile at room temperature afforded the corresponding bisazidophosphanes 2,6-(2-MeC(6)H(4))(2)C(6)H(3)P(N(3))(2), 2,6-(4-t-BuC(6)H(4))(2)C(6)H(3)P(N(3))(2) (5), or 2,6-Mes(2)C(6)H(3)P(N(3))(2) (6) (Mes = 2,4,6-Me(3)C(6)H(2)), respectively. These compounds are thermally labile and decompose into a number of azidophosphazenes. The azidocyclophosphazenes [NP(N(3))(C(6)H(3)(4-t-BuC(6)H(4))(2)-2,6)](3) (4) and [NP(N(3))C(6)H(3)Mes(2)-2,6](2) (8) have been isolated from these mixtures. All compounds were characterized by (1)H, (13)C, (31)P NMR and IR spectroscopy. Crystal structures of 2, 4, and 8 were determined.

Journal Article↗

Synthesis of a vanadium(III) tris(arylthiolato) complex and its reactions with azide and azo compounds: formation of a sulfenamide complex via cleavage of an azo N=N bond.

The tris(arylthiolate) vanadium(III) complex (1) has been synthesized in good yield. This complex is found to undergo CH activation across a V-S bond in the presence of TMEDA to give a cyclometalated species along with free arylthiol. Complex 1 behaves as a two-electron reductant toward Ad-N(3), yielding an imide complex. Treatment of 1 with azobenzene produces an imide-sulfenamide compound, in which an azo N=N bond cleavage takes place concomitant with formation of a V=N and an S-N bond.

Journal Article↗

Theoretical Evidence for Two New Intermediate Xenon Species: Xenon Azide Fluoride, FXe(N(3)), and Xenon Isocyanate Fluoride, FXe(NCO).

The reaction behavior of xenon difluoride, XeF(2), toward HN(3), NaN(3), and NaOCN was investigated in H(2)O, aHF (anhydrous HF), and SO(2)ClF solution. The analysis of the final reaction products (XeF(2) + HN(3) (NaN(3)) in H(2)O --> HF, N(2), N(2)O, Xe; XeF(2) + HN(3) in aHF --> N(2), Xe, N(2)F(2); XeF(2) + HOCN (NaOCN) in H(2)O --> HF, N(2), N(2)O, NH(3), CO(2), Xe) indicated the intermediate formation of FXe(N(3)) and FXe(NCO) and revealed different reaction mechanisms for both compounds. Both intermediates, FXe(N(3)) and FXe(NCO), were studied on the basis of ab initio computations at HF and correlated MP2 levels using a quasirelativistic LANL2DZ pseudopotential for Xe. Both were shown to possess stable minima at HF and MP2 levels (no imaginary frequencies) with the following structural parameters (MP2/LANL2DZ). FXe(N(3)): C(s)(); d(F-Xe) = 2.051, d(Xe-N1) = 2.318, d(N1-N2) = 1.241, d(N2-N3) = 1.180 Å; angle(FXeN1) = 178.1, angle(XeN1N2) = 112.2, angle(N1N2N3) = 174.7 degrees. FXe(NCO): C(s)(); d(F-Xe) = 2.024, d(Xe-N) = 2.206, d(N-C) = 1.194, d(C-N) = 1.231 Å; angle(FXeN) = 178.7, angle(XeNC) = 125.4, angle(NCO) = 174.2 degrees. The experimentally unobserved cyanate isomer, FXe(OCN), was calculated to be higher in energy than the isocyanate isomer FXe(NCO): DeltaE = 19.8 (HF), 18.3 (MP2) kcal mol(-)(1).

Journal Article↗

Monomeric Titanium(IV) Azides as a New Route to Titanium Nitride.

The reaction of Ti(NMe(2))(4) with 2 equiv of Me(3)SiN(3) in toluene solution affords a dark red polymeric material of composition [Ti(NMe(2))(2)(N(3))(2)](n) (1). If the reaction is carried out in pyridine (py) solution, dark red, crystalline [Ti(NMe(2))(2)(N(3))(2)(py)(2)] (2) is formed. Analogous reactions of Ti(NMe(2))(4) with 2 or 1 equiv of Me(3)SiN(3) in the presence of 1 equiv of bipyridyl (bipy) in toluene solution afford brown crystals of [Ti(NMe(2))(2)(N(3))(2)(bipy)] (3) and dark red crystals of [Ti(NMe(2))(3)(N(3))(bipy)] (4), respectively. Crystallographic data for 2: orthorhombic, C222(1), a = 7.120(1) Å, b = 15.899(3) Å, c = 16.946(4) Å, V = 1918.3(6) Å(3), rho = 1.310 g/cm(3), Z = 4. Crystallographic data for 3: monoclinic, I2/a, a = 7.358(2) Å, b = 16.808(4) Å, c = 14.837(6) Å, beta = 95.40(2) degrees, V = 1826.8(1) Å(3), rho = 1.368 g/cm(3), Z = 4. Crystallographic data for 4: monoclinic, P2(1)/c, a = 15.682(2) Å, b = 8.814(1) Å, c = 15.128(1) Å, beta = 108.39(1) degrees, V = 1984.2(4) Å(3), rho = 1.267 g/cm(3), Z = 4. Compounds 1 and 2 deposit thin films of titanium nitride (TiN) on silica and/or nickel substrates in the temperature range 300-400 degrees C. The TiN films deposited from precursor 2 are superior to those deposited from 1.

Journal Article↗

Reactivity of Osmium(VI) Nitrides with the Azide Ion. A New Synthetic Route to Osmium(II) Polypyridyl Complexes.

There is an extensive reactivity chemistry between trans-[Os(VI)(tpy)(Cl)(2)(N)](+) (1) (tpy = 2,2':6',2"-terpyridine) and N(3)(-). Reaction of 1 with N(3)(-) in CH(2)Cl(2) or acetone occurs by electron transfer to give trans,trans-(tpy)(Cl)(2)Os(II)(N(2))Os(II)(Cl)(2)(tpy). In CH(3)CN, trans-Os(II)(tpy)(Cl)(2)(N(2)) forms but undergoes solvolysis to give trans-Os(II)(tpy)(Cl)(2)(CH(3)CN). 1 reacts with excess N(3)(-) in CH(3)CN to give Os(III)(tpy)(Cl)(2)(5-CH(3)-tetrazolate), which has been characterized by X-ray crystallography. This is the first known Os-tetrazolato complex. 1 reacts with N(3)(-) in the presence of CS(2) to give trans-[Os(II)(tpy)(Cl)(2)(NS)](+), SCN(-), and N(2).

Journal Article↗

Azide reactions for controlling clean silicon surface chemistry: benzylazide on Si(100)-2 x 1.

A combination of experimental and computational studies presents direct proof of a novel reaction pathway that delivers aromatic compounds onto a Si(100)-2 x 1 substrate. Benzylazide chemisorbs on a Si(100)-2 x 1 surface, and this chemisorption is followed by nitrogen elimination, leading to a stable surface adduct based on a Si-Si-N cyclic entity. This reaction occurs via a stable surface intermediate with the surface-bound nitrogen molecule stabilized by the presence of a neighboring aromatic group, which eventually releases nitrogen into the gas phase and forms the final product.

Journal Article↗