PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Polystyrenes”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64Linked to original sources
PubMed2000

Solid-phase synthesis of a modified 13-residue seminalplasmin fragment on 1,6-hexanediol diacrylate-crosslinked polystyrene support.

A novel 1,6-hexanediol diacrylate cross-linked resin was prepared that was subsequently functionalized by using chloromethyl methyl ether to afford a high-capacity resin. The resin exhibited good swelling and its application in the successful synthesis of a 13-residue peptide corresponding to the fragment of seminalplasmin has been illustrated. The resin was chemically inert at peptide synthetic conditions.

Acrylates↗
PubMed2002

Surface-alkylated polystyrene monolithic columns for peptide analysis in capillary liquid chromatography-electrospray ionization mass spectrometry.

Macroporous poly(styrene-divinylbenzene) (PS-DVB) monoliths were prepared by in situ polymerization in PEEK, fused silica, or stainless steel tubing having an inner diameter of 75 or 125 microm. A process is described for subsequent alkylation of the flow-contacting surfaces of the monoliths. The process treats all the surfaces including through-pore surfaces of the rigid macroporous monolith with a solution containing a dissolved Friedel-Crafts catalyst, an alkyl halide (1-chlorooctadecane), and an organic solvent. This process produces an improved reversed-phase liquid chromatographic separation of peptides compared to an unmodified monolithic PS-DVB column. The surface octadecylation is not necessary for a reversed-phase separation of proteins since both unmodified and modified columns provide comparable results. Tryptic protein digests, standard proteins, and standard peptides were used to evaluate the monolithic columns by employing electrospray mass spectrometry detection. Potential applications in proteomics studies by mass spectrometry, which use the alkylated monolithic column engaged onto the nanofabricated electrospray ionization chip, are also discussed.

Alkylation↗
PubMed2000

Protein interactions with polyelectrolyte multilayers: interactions between human serum albumin and polystyrene sulfonate/polyallylamine multilayers.

The interactions between polystyrenesulfonate (PSS)/polyallylamine (PAH) multilayers with human serum albumin (HSA) were investigated by means of scanning angle reflectometry (SAR). We find that albumin adsorbs both on multilayers terminating with PSS (negatively charged) or PAH (positively charged) polyelectrolytes. On films terminating with PSS only, an albumin equivalent monolayer is found whereas when PAH constitutes the outer layer, albumin interacts with the multilayer in such a way as to form a protein film that extends over thicknesses that can be as high as four times the largest dimension of the native albumin molecule. Once the protein film is formed, it is found that when the albumin solution is replaced by a pure buffer solution of same ionic strength as the adsorption solution almost no desorption takes place. On the other hand, when a buffer solution of higher ionic strength is brought in contact with the albumin film, a significant amount of adsorbed proteins is released. One also observes that, for albumin solutions of a given protein concentration, the adsorbed protein amount depends on the ionic strength of the adsorption solution. On surfaces terminating with PAH, the adsorbed protein amount first increases rapidly but passes through a maximum and decreases with the ionic strength. The ionic strength corresponding to the maximum of the adsorbed albumin amount itself depends on the albumin concentration. On the other hand, on films terminating with PSS the adsorbed amount increases with the salt concentration before leveling-off. These results show that the underlying complexity of concentration and pH dependent adsorption/desorption equilibria often simply termed "protein adsorption" is the result of antagonist competing interactions that are mainly of electrostatic origin. We also propose two microscopic models, that are compatible with our experimental observations.

Adsorption↗
PubMed2006

Polystyrene microgel amphiphiles with maltohexaose. Synthesis, characterization, and potential applications.

4-Vinylbenzyl maltohexaoside peracetate (1) was copolymerized with divinylbenzene (DVB) using 1-phenyl-1-(2',2',6',6'-tetramethyl-1'-piperidinyloxy)ethane (2) in m-xylene. The copolymerizations were performed at 138 degrees C for 20 h using the mole fraction of 1 in the total feed of 1 and DVB (F1: [1]/[1]+[DVB]) varying from 0.11 to 0.38, affording polymeric products in yields ranging from 32 to 40%. The characterizations by linear PS-calibrated size exclusion chromatography (SEC), dynamic laser light scattering (DLS) measurements, and 1H NMR spectroscopy indicated that the product was assignable to the cross-linked poly(4-vinylbenzyl maltohexaoside peracetate) particle which is able to produce stable solutions, i.e., the PSt microgel with acetyl maltohexaose, 3. The specific rotations ([alpha]D23, c = 1.0 CHCl3) of 3 ranged from +43.3 degrees to +85.6 degrees. The average molar masses determined by the static laser light scattering (SLS) measurement of 3, M(w,SLS)'s, were from 64,700 to 118,000, which were calculated using the respective refractive index increments, dn/dc's, ranging from 0.03387 to 0.08340. The apparent numbers of the 1, 2, and DVB units in 3, N1, N2, and N(DVB), which were estimated from the respective [alpha]D23 values, M(w,SLS)'s, and real yields, ranged from 22 to 35, from 7 to 26, and from 146 to 506, respectively. The deacetylation of 3 was achieved by treatment with sodium methoxide in dry 1,4-dioxane to produce the PSt microgel with maltohexaose as the hydrophilic segment, 4, as a white solid. The solubility of 4 in various solvents was examined, indicating that a hydrophilic property was effectively introduced. Notably, 4 gave clear solutions in the mixed solvent of 1,4-dioxane and H2O. The ability to solubilize fullerite (mixture of fullerenes, C60/C70 = ca. 9/1) in aqueous solutions was examined according to the literature method. Approximately, 100 mg of 4 (1.7 micromol) solubilizes 1.3 mg of fullerite (1.7 micromol).

Acetylation↗
PubMedDate not supplied

Use of statistical design of experiments in the optimization of amide synthesis utilizing polystyrene-supported N-hydroxybenzotriazole resin.

Two fields that routinely perform reaction optimization studies are chemical development (prior to scale-up) and medicinal or combinatorial chemistry (prior to analogue synthesis or library production). To date, the use of statistical design of experiments (DoE) in conjunction with automated synthesizers has been applied in process research to a greater extent than in the medicinal or combinatorial laboratories. We have applied DoE in conjunction with an automated synthesizer to optimize the synthesis of amides employing resin-bound N-hydroxybenzotriazole (PS-HOBt) active esters as intermediates. This methodology allowed the rapid development of an improved protocol for the parallel synthesis of amides by conversion of carboxylic acids to PS-HOBt esters followed by treatment with appropriate amines. Product isolation involved only simple filtration and evaporation.

Amides↗
PubMedDate not supplied

Deazapurine solid-phase synthesis: construction of 3-substituted pyrrolo[3,2-d]pyrimidine-6-carboxylates on cross-linked polystyrene bearing a cysteamine linker.

The first solid-phase methodology for the preparation of pyrrolo[3,2-d]pyrimidines is presented. Merrifield resin bearing a cysteamine "traceless" linker was treated with 4-oxo-N-(PhF)proline benzyl ester (10; PhF = 9-(9-phenylfluorenyl)) to provide resin-bound aminopyrrole 20, which was treated with ethyl, phenyl, 4-phenoxyphenyl, and 2,4-dimethoxyphenyl isocyanates to furnish resin-bound ureidopyrroles 21a-d. Resin-bound pyrrolo[3,2-d]pyrimidines 22a-d were then obtained by acylation of 21 using trichloroacetyl chloride in dioxane followed by treatment with Cs2CO3 in DMF. Cleavage of pyrrolo[3,2-d]pyrimidines 22a-d from the resin was achieved in two steps, by oxidation of the sulfur to the sulfone followed by beta-elimination in the presence of t-BuONa. Four pyrrolo[3,2-d]pyrimidines, 24a-d, with different alkyl and aryl substituents at the N3 pyrimidine nitrogen, were thus obtained in overall yields of 42-50% and purities of 90-100%.

Acylation↗