PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Humic Substances”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67Linked to original sources
PubMed2003

Reduction of chloroform formation potential of humic acid by sonolysis and ultraviolet irradiation.

This study is concerned with the changes of chloroform formation potential during the reaction of humic acid (HA) and sodium hypochlorite caused by different oxidative pretreatments: ultraviolet (UV) irradiation, ultrasonic (US) irradiation or combined UV-US irradiations. The UV and US decomposition of a reagent HA in water was investigated. The characterization of the oxidized HA sample by UV absorptiometry, synchronous fluorescence spectroscopy and size exclusion chromatography points a synergetic effect of the combined process. The values of the chlorine demand and chloroform formation potential were conventionally determined after a 96 h reaction at neutral pH. It was found that all applied processes decreased the concentration of chloroform but the highest decrease was observed for the UV-US treatment.

Chloroform↗
PubMed2003

The effect of humic acids on nitrobenzene oxidation by ozonation and O3/UV processes.

Three types of commercially available humic acids from different sources were used to simulate natural organic matter in water for the investigation of nitrobenzene oxidation by ozonation and O(3)/UV. Despite the structural differences among the Fluka, Aldrich and Suwanee River humic acids as reflected by the UV absorptivity, their effects on nitrobenzene removal rate was observed to be similar for the two processes. Removal rate of nitrobenzene was hindered by the addition of humic acids in ozonation as well as in O(3)/UV processes. However, the hindrance by the humic acids was more pronounced in O(3)/UV as compared to the ozonation process. The effect of humic acid in O(3)/UV was primarily a UV light screening. Addition of humic acids above a certain concentration did not cause any further retardation on nitrobenzene removal rate by ozonation and O(3)/UV. Accumulation of hydrogen peroxide as well as probable formation of peroxy radicals in the solutions might induce chain promoting reactions to produce hydroxyl radical during the nitrobenzene oxidation. For waters containing high levels of humic acid, ozonation alone might be as effective as O(3)/UV process for the removal of nitrobenzene.

Humic Substances↗
PubMed2003

Molecular characterization of dissolved organic matter in freshwater wetlands of the Florida Everglades.

In this study, the molecular composition of dissolved organic matter (DOM), collected from wetlands of the Southern Everglades, was examined using a variety of analytical techniques in order to characterize its sources and transformation in the environment. The methods applied for the characterization of DOM included fluorescence spectroscopy, solid state 13C CPMAS NMR spectroscopy, and pyrolysis-GC/MS. The relative abundance of protein-like components and carbohydrates increased from the canal site to more remote freshwater marsh sites suggesting that significant amounts of non-humic DOM are autochthonously produced within the freshwater marshes, and are not exclusively introduced through canal inputs. Such in situ DOM production is important when considering how DOM from canals is processed and transported to downstream estuaries of Florida Bay.

Ecosystem↗
PubMed2003

Dewatering of alumino-humic sludge: impacts of hydroxide.

The paper draws together information on factors which influence the conditioning and dewatering behaviour of an alum sludge gained from the coagulation of a low-turbidity coloured water. A principal focus is the potential impact of aluminium hydroxide on the sludge character. Background information is provided on the composition of the source floc for the domain pH 6.0-6.5 and Al>2.0mg/l. From this, there were many pointers to the presence of Al(OH)(3)(s) within the floc. A series of comparisons were made between an alum sludge and a hydroxide suspension at a concentration equivalent to the coagulant fraction within the sludge. The parameters studied included floc size, floc density, polymer adsorption and dewatering behaviour at different time-scales. In all cases, there were strong similarities in the behaviour of the two suspensions-indicating the potential impact of the hydroxide. There was also evidence of common features being displayed by both the organic fractions and the hydroxide. It was suggested that some of the behavioural features might emanate from a common fractal structure within the source floc, the fractal dimension (approximately 1) being insensitive to composition.

Alum Compounds↗
PubMed2003

Spectroscopic characteristics of ultrafiltration fractions of fulvic and humic acids isolated from an eucalyptus bleached Kraft pulp mill effluent.

In order to investigate the chemical heterogeneity of fulvic and humic acids previously isolated from a bleached Kraft pulp mill effluent, a sequential ultrafiltration (UF) scheme through four polyethersulphone membranes was applied. The unfractionated fulvic and humic acids and their fractions were characterized by UV-VIS, synchronous fluorescence (with Deltalambda=60 nm) and FTIR spectroscopies. The FTIR spectra were compared with those of lignin isolated from Eucalyptus globulus wood and from the black liquor of a Kraft pulping process. The results highlighted that fulvic acids fractions of low molecular sizes contain more lignin derived phenolic units, while those of higher molecular size exhibit a higher content of carbohydrate structures. However, the shift observed in the UV-VIS absorbance and fluorescence intensity towards higher wavelength, suggests a higher degree of conjugation of pi-bonds in the fractions of highest molecular sizes. In what concerns the humic acids size fractions, the FTIR spectra did not exhibit major differences but, as observed for the fulvic acids' fractions, UV-VIS and synchronous fluorescence spectra also suggest a higher degree of conjugation of pi-bonds in the fractions with the highest molecular sizes. It was also observed that the fulvic and humic acids fractions of the same molecular size, operationally defined by the UF process, exhibit major differences in their spectroscopic features.

Benzopyrans↗
PubMed2000

The formation and control of disinfection by-products using chlorine dioxide.

In this study, chlorine dioxide (ClO2) was used as an alternative disinfectant with vanillic acid, p-hydroxybenzoic acid, and humic acid as the organic precursors in a natural aquatic environment. The primary disinfection by-products (DBPs) formed were trihalomethanes (THMs) and haloacetic acids (HAAs). Under neutral conditions (pH = 7) for vanillic acid, more total haloacetic acids (THAAs) than total trihalomethanes (TTHMs) were found, with a substantial increase during the later stages of the reaction. In the case of p-hydroxybenzoic acid, the amount of THAAs produced was minimal. Raising the concentration of ClO2 was not favorable for the control of THAAs in low concentrations of vanillic acid. ClO2 could reduce the total amount of TTHMs and THAAs for higher concentration of vanillic acid. It was found that the humic acid treatment dosage was not significant. Under alkaline conditions (pH = 9), the control of TTHMs and THAAs for the treatment of vanillic acid was better and more economical, however, an appreciable amount of inorganic by-products were observed. Under the same alkaline condition, the control of THAA for the treatment of p-hydroxybenzoic acid was not beneficial and for the treatment of humic acid was not significant.

Chlorine Compounds↗
PubMed2000

Measurement of trihalomethanes in potable and recreational waters using solid phase micro extraction with gas chromatography-mass spectrometry.

Solid phase micro extraction (SPME) was applied to the determination of selected trihalomethanes (THMs), chloroform, bromodichloromethane, dibromochloromethane, bromoform, in potable and recreational waters. The selected samples were environmentally significant due to mandatory limits imposed by regulatory agencies. Extraction of the analytes was performed using headspace SPME (fused silica fibre with a 100 microm poly(dimethylsiloxane coating) followed by thermal desorption at 220 degrees C and GC-MS analysis. A linear working range of 10-160 microg/l was established with relative standard deviations (%RSD) within the range, 0.9-19%. Limits of detection (LOD) were 1.0-2.8 microg/l. The highest THM concentration was 61.8 microg/l which was well within the proposed European Union directive of 100 microg/l. The total THMs determined in swimming pool waters ranged from 105-134 microg/l, with chloroform accounting for 84-86% of total THM.

Bromine↗