PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “ORTHODONTICS, CORRECTIVE”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources

[Incisors crossbite correction with spring inclined plane appliance: principles and procedures].

The spring inclined plane is one of the removable appliances that can be used to correct incisors crossbite which is designed for the early treatment period. In order to prevent skeletal malocclusion and reestablish proper muscle balance. The appliance is very simple which composes of clasps on the first molar both sides and spring 0.9 millimetre diameter. This spring was bended as an inclined plane above the lower incisors. The force from this spring will push upper incisors anteriorly. The spring inclined plane is very effective in mixed dentition. Nevertheless this spring is appropriate to use in the patient who can not wear the removeable orthodontic appliance in the upper jaw.

Adolescent↗

Conservative management of anterior spacing and deep bite: a case report.

This case report demonstrates correction of a maxillary anterior diastema in a Class I, deep bite dentition by using an intrusion utility archwire. With proper case selection, this approach permits a conservative resolution to a common esthetic complaint. Critical treatment criteria, including diagnostic considerations, appliance mechanics, and retention, are discussed.

Adult↗

An extended three-stage treatment to correct a severe skeletal and dental discrepancy.

A report of a case of extended treatment of a patient with severe mandibular retrognathism and an Angle Class II division 1 malocclusion. Initial fixed appliance treatment reduced incisor protrusion. A second phase utilising a Teuscher appliance achieved improved facial and dental relations through excellent mandibular growth. A third phase of fixed Edgewise treatment finalised dental relations.

Cephalometry↗

A prospective cohort study of a clip-on fixed functional appliance.

The aim of this study was to evaluate the effectiveness of a fixed Twin-block appliance by using a study with a prospective cohort design. Thirty-two children were included in the study over a 2-year period. Cephalometric data were analyzed with the Pancherz cephalometric analysis. Study models were analyzed with the PAR index, and the treatment processes were recorded from the patients' records. The results showed that this appliance was effective in correcting Class II malocclusion; the noncompliance rate was only 6%. It can be concluded that this method of treatment might have some advantages over other fixed and removable functional appliances, but this should be tested with randomized trial methodology.

Adolescent↗

Comparison of 2 modifications of the twin-block appliance in matched Class II samples.

The purpose of this study was to compare the skeletal and dental changes contributing to Class II correction with 2 modifications of the Twin-block appliance: Twin-block appliances that use a labial bow (TB1) and Twin-block appliances that incorporate high-pull headgear and torquing spurs on the maxillary central incisors (TB2). After pretreatment equivalence was established, a total of 36 consecutively treated patients with the TB1 modification were compared with 27 patients treated with the TB2 modification. Both samples were treated in the same hospital department and the same technician made all the appliances. The cephalostat, digitizing package, and statistical methods were common to both groups. The results demonstrated that the addition of headgear to the appliance resulted in effective vertical and sagittal control of the maxillary complex and thus maximized the Class II skeletal correction in the TB2 sample. Use of the torquing springs resulted in less retroclination of the maxillary incisors in the TB2 sample when compared with the TB1 sample; however, this difference did not reach the level of statistical significance.

Adolescent↗

A functional appliance system for the correction of class II relationships.

A technique is described for the correction of Class II malocclusion involving a functional appliance and consisting of three phases. 1. Adjustment of posterior arch width and dental alignment, using semi-rapid maxillary expansion by means of an upper removable appliance, to co-ordinate the anticipated positions for the arches. 2. Correction of the Class II dental relationships using a modification of the twin-block functional appliance. 3. Retention, using an upper removable appliance with a very steep anterior bite plane. The technique is illustrated by a case report.

Activator Appliances↗

The prevention of relapse after maxillary osteotomies in cleft palate patients.

The use of segmental osteotomies to treat surgically severe malocclusion in cleft patients is discussed. The coordinated approach by orthodontist and surgeon is advocated and the advantage of such an approach is stressed. The method allows for the simultaneous correction of the skeletal deformity and closure of residual oro-nasal perforation. The relapse tendency in both antero-posterior and transverse dimensions appeared to be minimal as found in this study of 18 patients.

Adolescent↗

Multiple extraction patterns in severe discrepancy cases.

Thirty-five cases have been collected from colleagues which illustrate that removal of additional maxillary teeth, following first bicuspid extractions, can allow the successful resolution of difficult discrepancy and anchorage cases. Charts 1 and 2 describe the amounts of space that might be expected by removal of additional upper bicuspids, upper first molars, and upper second molars. The findings on upper second molars are admittedly limited. Anchorage values as expressed by an efficiency percentage were approximately what would be expected from a study of anchorage values of the roots of teeth. The removal of upper second bicuspids has a better anchorage efficiency potential than the upper first molar, but this may be overcome somewhat by the greater size of the molar. Clear guidance cannot be given as to which teeth to remove in a specific case, but it is the observation of the author that for cases that are still in full Class II following four bicuspid space closure, upper second bicuspid removal would be more helpful from an anchorage perspective, whereas for cases that are in end-to-end molar relationship or require only a few millimeters to move into Class I, the upper first molar might be the tooth of choice. Also, the supper first molar removal allows for a more "normal" appearing arch assuming normal alignment and size of the upper second and third molars. The comparison with the nonextraction control group showed an enormous difference in the amount of incisor retraction that extractions provide when related to the maxilla. The nonextraction control group, though experiencing dramatic correction of Class II relationships, showed no incisor movement within the maxilla. Some problems which appeared in the sample were described. Removal of upper teeth in addition to the four first bicuspids can be a solution to an occasional anchorage, skeletal, growth or cooperation problem.

Adolescent↗

The functional treatment of anterior-open bite: three case reports.

Functional treatment of three skeletal open-bite patients with Bionator, Frankel IV and Posterior bite-block appliances is presented. Pretreatment and post treatment records were evaluated. Correction of malocclusion by changing direction of the mandibular development, adaptive bony development of the condyle, vertical development in posterior region, an increase in ramus length, a decrease in the lower facial height were observed in this report. The results of functional treatment of three appliances had different effect mechanisms.

Cephalometry↗

Analysis and treatment of hemifacial microsomia in childhood.

Hemifacial microsomia (HFM) is not a fixed dysmorphic deformity, but rather a progressive, complex deformation, involving the soft tissues and skeletal structures derived from the first and second branchial arches. Secondary growth distortion is seen particularly in the failure of midface growth, because of inadequate mandibular vertical growth on the involved side. Based on this concept of a dysfunctional matrix, we treat HFM in childhood according to the severity of the mandibular hypoplasia. In the type I and type IIA children seen in the deciduous stage, we recommend use of an activator or functional appliance. The more severe type IIB and type III children with absent structures need early construction of the mandibular ramus, glenoid fossa, and temporomandibular joint. In so doing, we convert the severely hypoplastic mandible into a more symmetric and functional type IIA status. Correction of the mandible appears to maximize potential growth and minimize the documented secondary distortion in the maxilla. Preliminary study confirms that early correction minimizes the need for maxillary and orbital osteotomies as these patients enter adulthood. We have briefly outlined our approach to soft-tissue hypoplasia and neuromuscular deficiency in HMF. Further refinements are needed in these areas.

Adolescent↗

Treatment effects of a modified quad-helix in patients with dentoskeletal open bites.

INTRODUCTION: The aim of this study was to investigate the effectiveness of a quad-helix/crib (Q-H/C) appliance in a group of growing subjects with thumb-sucking habits and both dental and skeletal open bites. METHODS: The records of 23 subjects treated with Q-H/C appliances were compared with a control group of 23 untreated subjects with similar vertical relationships. Lateral cephalograms were analyzed before treatment (T1; mean age, 8.4 +/- 1.4 years) and immediately after treatment (T2; mean age, 9.9 +/- 1.5 years). Mean duration of treatment was 1.5 +/- 7 months. The T2-T1 changes in the 2 groups were compared with a nonparametric test for independent samples (Mann-Whitney U test). RESULTS: The average increase in overbite during Q-H/C therapy (3.6 mm more than the control group) overcorrected the amount of anterior open bite at T2. However, 4 of 23 subjects did not show positive overbites at T2. Both the maxillary and mandibular incisors had significantly greater lingual inclinations (about 4.0 degrees) associated with greater extrusion (1.4 and 1.0 mm, respectively) in the Q-H/C group than in the control group. In addition, the treated group showed a greater downward rotation (1.2 degrees) of the palatal plane than did the control group. This change was associated with a greater increase in upper anterior facial height (0.7 mm) and a clinically significant reduction in the palatal plane-mandibular plane angle (-1.7 degrees) in the Q-H/C group with respect to the controls. The upper and lower lips showed significant tendencies toward retraction relative to the E-plane in the treated group (2.6 and 2.9 mm, respectively) compared with the controls. CONCLUSIONS: The Q-H/C appliance was effective in correcting the dental open bite in 90% of growing subjects with thumb-sucking habits and dentoskeletal open bites. The Q-H/C protocol produced a clinically significant improvement in the vertical skeletal relationships because of downward rotation of the palatal plane.

Cephalometry↗

[Prosthetic aspects in the planning of progenia operations].

Operative planning for progenia is carried out using prosthetic principles. Correction of a malpositioned mandible, modelling of incongruent dental arches, functional distribution of piers, and a favorable interalveolar connecting line form the basis for stable occlusion and articulation. The fitting of a prosthesis later is simplified by such intensive interdisciplinary cooperation.

Adolescent↗

Correction of a severe Class III malocclusion.

The success of early orthopedic treatment in patients with Class III anomalies depends on facial skeletal development and type of treatment. This case report describes the treatment of a 12.6-year-old girl who had a severe Class III malocclusion with a 6-mm anterior crossbite, a deep overbite, a narrow maxilla, and unerupted maxillary canines. The treatment plan included rapid palatal expansion to expand the maxilla, reverse headgear to correct the maxillary retrognathia, a removable anterior inclined bite plane to correct the anterior crossbite and the deep overbite, and fixed edgewise appliances to align the teeth. One canine was brought into alignment, but the other was placed in occlusion in its transposed position. Ideal overjet and overbite relationships were established, and the final esthetic result was pleasing.

Cephalometry↗

Herbst/multibracket appliance treatment of Class II division 1 malocclusions in early and late adulthood. a prospective cephalometric study of consecutively treated subjects.

A prospective study of 23 consecutive adult Class II division 1 malocclusion subjects (19 female and 4 male) treated with the Herbst/multibracket (MB) appliance is presented. The skeletal, dental, and facial profile changes were evaluated in addition to the mechanism of Class II correction during the Herbst phase and the settling of the occlusion during the MB phase. The mean pre-treatment age of the subjects was 21.9 years (15.7-44.4 years). Lateral head films in habitual occlusion from before treatment (T1) and after the Herbst (T2) and MB (T3) phases were analysed using standard cephalometrics and the sagittal occlusion analysis. For the standard cephalometrics, normal growth standards were utilized as control parameters. All patients were treated successfully to a Class I occlusal relationship with a normal overjet and overbite. The mandibular variables (SNB and SNPg) showed an angular increase (1.22 and 0.93 degrees, respectively) during T2-T1 followed by an angular reduction (0.40 and 0.23 degrees, respectively) during T3-T2. Compared with normal growth standards, all mandibular parameters were affected favourably by Herbst/MB treatment. Both the skeletal and soft tissue profile convexities were significantly reduced. Over the entire observation period (T3-T1), the largest amount of profile convexity reduction was seen for the soft tissue profile excluding the nose (mean 3.14 degrees). Class II correction was achieved by both skeletal and dental changes: overjet correction by 13 per cent skeletal and 87 per cent dental changes, and molar correction by 22 per cent skeletal and 78 per cent dental changes. In conclusion, on a short-term basis, the Herbst/MB appliance combination was found to be a powerful tool for non-surgical, non-extraction, treatment of Class II division I subjects in early and late adulthood.

Adolescent↗

[Surgical methods for the correction of malocclusion Angle II/1 with postoperative prosthetic rehabilitation].

The operating methods for Angle class II, 1 are described and a method developed in which a front teeth block segment in the maxilla is raised and palatally tilted. At the same time a front and lateral teeth block segment of the lower jaw is pushed forward and lowered. The method improves the profile as well as occlusion and requires only a minimum of prosthetical care.

Humans↗

Correction of the short-face syndrome-vertical maxillary deficiency: a preliminary report.

Careful clinical studies and cephalometric and model analyses are required in the planning for treatment of vertical maxillary deficiency. The maxilla is repositioned inferiorly to elongate the face and to achieve facial balance. Simultaneous Le Fort I osteotomy with bone grafting is a helpful adjunct in the treatment of vertical maxillary deficiency in either dentulous or edentulous patients.

Adult↗