SEARCH · PubMed Health

Results for “Tablets”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources

PubMed2002

Crystal habit and tableting behavior.

The tableting behavior of drugs can be affected by changes in the crystal habit. Different crystal habits of the common analgesic drugs ibuprofen and acetaminophen were prepared. Their tableting behavior was characterized. In the case of ibuprofen, a plate-shaped crystal was compared with the common needle-shaped form. In the case of acetaminophen, plate-shaped and prismatic crystals of two different particle sizes were prepared. The aim was to find a crystal form that is suitable for direct compression with only a low amount of excipients. This requires a substance that forms stable compacts at low punch forces, having a good flowability and only a low tendency to stick to the punches. In order to compare the tableting behavior of different substances, a comparative factor (T-factor) was calculated, based on typical parts of the punch force/displacement-profile and properties of the resulting compact. This method works with low amounts of substance and allows a rapid reproducible determination of the tableting behavior. The method was evaluated by characterizing different typical excipients normally used for the production of tablets.

Acetaminophen↗

PubMed2003

Dissolution and assaying of multicomponent tablets by chemometric methods using computer-aided spectrophotometer.

Dissolution of three component tablets containing paracetamol (APAP), propyphenazone (PP), and caffeine (CAF) was carried out by USP paddle method. Three chemometric methods; inverse least square (ILS), principal component regression (PCR) and partial least squares (PLS) were applied to simultaneous assay of APAP, PP and CAF in tablets. The PCR, PLS and ILS methods were applied to simultaneous dissolution APAP, PP and CAF in tablets using a double beam UV-Vis spectrophotometer without any chemical separation and any graphical treatment of the overlapping spectra of three drugs. Twenty two mixture solutions in different concentrations were prepared in simulated gastric juice (SGJ, USP) for the chemometric calibrations as training set. The absorbance data matrix was obtained by measuring the absorbance at 14 wavelength points (from 222.5 to 292.5 nm) with the intervals of 5 nm (Deltalambda=5 nm) in the spectral region between 200 and 310 nm. Training set and absorbance data were used for the calibrations of chemometric methods. The developed calibrations were tested for the previously prepared solutions of mixture of three drugs for the validation of the assay method. The chemometric calculations were performed by using the 'MAPLE VRSQUO; software. The results of three chemometric methods were statistically compared with each other. These chemometric calibrations were successfully applied to the content uniformity and dissolution of the multicomponent tablets without any separation procedure. The synthetic mixtures of three drugs were used for the validity of the calibrations. Means recoveries (percent) and relative standard deviation of PLS, PCR and ILS methods were found to be 100.1+/-0.6, 101.4+/-1.6 and 100.1+/-0.6 for APAP; 100.9+/-3.2, 102.0+/-3.3 and 100.9+/-3.2 for PP; 99.9+/-3.5, 101.6+/-3.3 and 99.9+/-3.2 for CAF, respectively. Dissolution profiles of three component tablets were performed. More than 95% of drugs were dissolved within 15 min. All of the three-chemometric methods in this study can be satisfactorily used for the quantitative analysis and for dissolutions test of multicomponent dosage form.

Numerical Analysis, Computer-Assisted↗

PubMed2003

Assessment of tableting properties using infinitesimal quantities of powdered medicine.

In the early stage of new drug candidate development, the available quantity of drug substance is limited. In order to carry out preformulation studies of tablets in this stage, a static compression test was carried out with infinitesimal quantity of powder sample using the new Micro Powder Characterizer device. Aspirin, phenacetin, ascorbic acid and ethenzamide were used as model drugs. In this study, the possibility of use of the Micro Powder Characterizer as a device for estimating the tableting properties of each powder sample such as stress displacement curves, tablet tensile strength, stress relaxation rate, and ejection energy was evaluated. In addition, the differences between the Micro Powder Characterizer and the traditional large-scale compression testing machine were compared. It was found that tableting properties could be estimated by the Micro Powder Characterizer, and that the quantity required to estimate tableting properties was approximately 10 mg per measurement. The results were nearly equal to those obtained with the traditional large-scale compression testing machine. This technique thus appears to be useful for early-stage preformulation studies of new drug candidates.

Drug Evaluation, Preclinical↗

PubMed1999

The use of isothermal heat conduction microcalorimetry to evaluate drug stability in tablets.

Isothermal heat conduction microcalorimetry was used to evaluate chemical stability of a solid drug in tablets. A variety of mixtures were compressed to flat faced tablets of 300 mg weight and 10 mm diameter. The content of drug amounted to 10%. Besides drug containing tablets, also placebo tablets as well as the non compressed mixtures were examined by microcalorimetry at 80 degrees C. The excipient Emcompress exhibited a substantially high exothermic heat flow that was due to a change in crystallinity. For Emcompress containing tablets this interfering signal resulted in such a way that the calorimetric data did not reflect the drug decomposition with sufficient accuracy. In the case of the other preparations the heat flow of the excipients were low, and the calorimetric data did reflect the drug decomposition. The stability increased with increasing content of CaHPO4, respectively, with decreasing content of water.

Calcium Phosphates↗

PubMed2000

Chitosan citrate as film former: compatibility with water-soluble anionic dyes and drug dissolution from coated tablet.

Chitosan citrate solution containing 25% w/w propylene glycol was prepared and tested for its compatibility with some water soluble anionic dyes. The immiscibility between erythrosine, ponceau 4R, sunset yellow or tartrazine solutions and chitosan citrate solution was evident. The Fourier transform-infrared spectra revealed charged interaction between anionic dye and chitosan. Brilliant blue and green FS at concentration of 0.02-1.00% w/w polymer could be miscible with chitosan citrate solution due to the decrease in charge interaction by the positive charge on molecule of brilliant blue, which was also the composition in green FS. Propranolol HCl tablets coated with these colored film-coating solutions exhibited good appearance and no color migration. Drug dissolution from coated tablets was pH dependent, corresponding to the ability of chitosan to protonate in the medium. Color incorporation slightly retarded drug dissolution in acidic medium. Drug dissolved from coated tablet colored with brilliant blue was faster than from that colored with green FS. This was because brilliant blue had positive charge and more SO(3)H groups on its molecular structure, and exhibited higher water solubility. Accelerated condition could alter dissolution characteristics, and the Td+t(0) value from curve fitting between the dissolution profiles and Weibull equation was increased. However, drug dissolution from freshly prepared coated tablets, coated tablets after exposure to accelerated condition and after storage at room temperature for 12 months conformed to the monograph in USP XXIII.

Chitosan↗

PubMed2003

Quantitative determination of diazepam, nitrazepam and flunitrazepam in tablets using thin-layer chromatography-densitometry technique.

A simple and reliable assay for diazepam, nitrazepam and flunitrazepam in tablets by high-performance liquid chromatography (HPLC) and thin-layer chromatography (TLC)-densitometry is described. A quantity of a ground tablet mass, equal to the average weight of one tablet was sonicated in MeOH, mixed with appropriate internal standard, filtered and either injected directly into the liquid chromatograph, or after evaporation and reconstitution of an aliquot of the extract, was spotted on a silica gel thin-layer plate. A variable UV detector, operated at 254 nm was employed in both procedures. A C18, reversed phase 7 microm column was used for HPLC analysis; the mobile phase was a 1:1 (v/v) mixture of MeOH (40 degrees C) and 0.01 M phosphate buffer (pH 7, 80 degrees C). The TLC plate was developed in an unsaturated chromatographic chamber containing 100 ml chloroform-acetone (9:1); at room temperature, the mobile phase was allowed to travel 15 cm. The percentage of the active ingredient content of each tablet obtained by both procedures, was in the range of the stated amount except for one brand of diazepam tablets which contained approximately 23% less active ingredient than the minimum prescribed amount. The TLC densitometry, although yields slightly higher values than the HPLC method, is preferred due to its simplicity, ease and low cost.

Chromatography, Thin Layer↗

PubMed2000

Simultaneous determination of atenolol and amlodipine in tablets by high-performance thin-layer chromatography.

A new simple, precise, rapid and selective high-performance thin-layer chromatographic (HPTLC) method has been developed for the simultaneous determination of atenolol (ATL) and amlodipine (AMLO) in tablets, using methylene chloride:methanol:ammonia solution (25% NH3) (8.8:1.3:0.1; v/v) as the mobile phase and Merck HPTLC plates (0.2 mm thickness) precoated with 60F254 silica gel on aluminium sheet as the stationary phase. Detection was carried out densitometrically using a UV detector at 230 nm. The retention factors of ATL and AMLO were 0.33 and 0.75, respectively. Calibration curves were linear in the range 10-500 microg ml(-1) for both. Assays of ATL and AMLO were 49.87 mg per tablet (relative standard deviation (R.S.D.), 1.3%) and 4.90 mg per tablet (R.S.D., 1.38%) for brand I, and 49.27 mg per tablet (R.S.D., 1.12%) and 4.98 mg per tablet (R.S.D., 1.42%) for brand II, respectively. The percentage recoveries for ATL and AMLO for brands I and II were 99.06 and 99.30%, and 99.27 and 99.15%, respectively.

Amlodipine↗

PubMed2003

A comparison of the pharmacokinetics, clinical efficacy, and tolerability of once-daily tramadol tablets with normal release tramadol capsules.

This report describes a pharmacokinetic study and a clinical study of three different formulations of oral tramadol: once-daily tramadol tablets 150 and 200 mg, and normal release tramadol capsules 50 mg 8-hourly. The randomized, open-label, crossover pharmacokinetic study included 22 subjects. The three treatments showed equivalent mean systemic availability of tramadol. The mean relative systemic availabilities (90% confidence intervals) for the once-daily tablets 150 mg and the once-daily tablets 200 mg versus the normal release capsules were 89.6 (83.3-95.8)% and 90.5 (84.6-96.8)%, respectively. The values for the once-daily tablet 150 mg versus the once-daily tablet 200 mg were 99.0 (92.6-105.9)%. The randomized, double-blind, double-dummy, crossover clinical study included 134 patients with moderate osteoarthritic pain. The three treatments showed similar efficacy; they all reduced patients' pain scores from baseline and there were no significant treatment differences in pain scores during treatment. The three treatments were also well tolerated.

Adult↗

PubMed2000

Influence of neutron activation factors on matrix tablets for site specific delivery to the colon.

The impact of the neutron activation procedure, i.e. incorporation of samarium oxide (Sm(2)O(3)) and neutron irradiation, on the compression properties (including the crushing strength) and in vitro dissolution of potential colonic delivery systems based on matrix tablets of amidated pectin (Am.P) or two types of hydroxypropyl methylcellulose (HPMC) was investigated. The neutron activation factors did not influence the compression properties of the tablets. Replacement of magnesium stearate with samarium stearate in directly compressed Am.P tablets to achieve both radiolabelling and lubrication resulted in a greater extent of concentration-dependent reduction of the crushing strength. Dissolution tests demonstrated that irradiation increased the release of the model drug ropivacaine from the tablets. The extent of this increase was unexpectedly low considering the previously observed degradation of the polymer expressed as an irradiation-induced viscosity reduction in solutions prepared from the polymers. Delayed-release coating with Eudragit L 100 protected the HPMC tablets against the release-increasing effect of irradiation until the late phases of release. Sm(2)O(3) retarded the release to a varying extent depending on particle characteristics. Incorporation of Sm(2)O(3) in the coating layer did not influence the release. However, one-third of the radioactivity leached from the coating within 60 min in 0.1 M HCl.

Amides↗

PubMed2001

Plasticisation of amylodextrin by moisture. Consequences for compaction behaviour and tablet properties.

PURPOSE: Amylodextrin, a starch-based controlled release excipient, spontaneously absorbs moisture during storage. The aim of this study was to investigate plasticisation of amylodextrin by moisture and its effect on compaction and tablet characteristics. METHODS: The glass transition temperature (T(g)) of amylodextrin powders with moisture fractions (x(w)) 0.070<x(w)<0.40 was studied by conventional and modulated DSC. Elastic modulus and yield stress were determined from compressive stress-strain experiments. Compaction behaviour was studied at 3 and 300 mm/s using a compaction simulator. RESULTS: The T(g) of amylodextrin-water blends showed a smooth reduction with increasing x(w), equalling room temperature at x(w)=0.19. Experimentally obtained T(g) values were close to temperatures as predicted by the Gordon-Taylor/Kelley-Bueche model and the modified Couchman-Karasz model. The elastic modulus decreased steeply between x(w)=0.17 and 0.23. Compaction experiments showed that moisture facilitated consolidation due to increasing powder compressibility and reduced compact relaxation. However, at x(w)=0.23, compressibility was reduced and relaxation significantly higher due to the rubbery character of this powder. Consequently, the lowest tablet porosities were obtained around x(w)=0.15. Although decreasing porosities enhanced tablet strengths, the maximum obtainable tablet strengths decreased with moisture due to reduced particle bonding and lowering of the elastic modulus. CONCLUSION: Moisture largely affects the visco-elastic and compaction characteristics of amylodextrin. Hence, control over moisture content is essential to produce tablets with reproducible porosity, strength and dissolution characteristics.

Calorimetry, Differential Scanning↗

PubMed2002

Inulin as filler-binder for tablets prepared by direct compaction.

The tabletting properties of a number of different amorphous inulin types were investigated. The types varied with respect to chain length, particle size and amount of included air in the particles. Powder flow properties and densities of the different types were investigated. Just as expected, it was found that the flow properties improved with increased particle size of the material. Compactibility was investigated by compression of tablets on a compaction simulator, simulating the compression on high-speed tabletting machines. The bonding capacity of all inulins was high. However, the lubricant sensitivity strongly varied among the different types of inulin. Generally, amorphous materials such as starches are highly lubricant sensitive, because they show ductile behaviour upon compaction. On the other hand, crystalline materials such as dicalcium phosphate dihydrate have a low lubricant sensitivity, because they fragment during compaction. A high lubricant sensitivity was indeed found for amorphous inulins with a low amount of entrapped air. In contrast, the lubricant sensitivity of the amorphous inulin was low when particles containing large amounts of air were compressed. Obviously entrapped air induces fragmentation of the powder particles by which the lubricant film, covering the particles, was destroyed. Tablets prepared from inulin did not disintegrate but they dissolved when incubated in water. The disintegration/dissolution time increased with decreasing chain length of the inulin. The addition of a disintegrant reduced the disintegration time. The somewhat slower dissolution of the longer chain inulin can be an advantage for chewable tablets or lozenges. It was concluded that inulin with large amounts of entrapped air is a good filler-binder and an attractive alternative to commonly used filler-binders.

Chemistry, Pharmaceutical↗

PubMed2003

Floating matrix tablets based on low density foam powder: effects of formulation and processing parameters on drug release.

The aim of this study was to develop and physicochemically characterize single unit, floating controlled drug delivery systems consisting of (i). polypropylene foam powder, (ii). matrix-forming polymer(s), (iii). drug, and (iv). filler (optional). The highly porous foam powder provided low density and, thus, excellent in vitro floating behavior of the tablets. All foam powder-containing tablets remained floating for at least 8 h in 0.1 N HCl at 37 degrees C. Different types of matrix-forming polymers were studied: hydroxypropyl methylcellulose (HPMC), polyacrylates, sodium alginate, corn starch, carrageenan, gum guar and gum arabic. The tablets eroded upon contact with the release medium, and the relative importance of drug diffusion, polymer swelling and tablet erosion for the resulting release patterns varied significantly with the type of matrix former. The release rate could effectively be modified by varying the "matrix-forming polymer/foam powder" ratio, the initial drug loading, the tablet geometry (radius and height), the type of matrix-forming polymer, the use of polymer blends and the addition of water-soluble or water-insoluble fillers (such as lactose or microcrystalline cellulose). The floating behavior of the low density drug delivery systems could successfully be combined with accurate control of the drug release patterns.

Chemistry, Pharmaceutical↗

PubMed1999

Typical variability in drug dissolution testing: study with USP and FDA calibrator tablets and a marketed drug (glibenclamide) product.

To evaluate variability in drug dissolution testing 28 laboratories analyzed USP calibrators, US FDA prednisone tablets and a marketed glibenclamide tablet product. The experiments were conducted using paddle and basket methods at 50 (calibrators) and 75 (glibenclamide) rpm. The media employed were deaerated by equilibrating at 37 degrees C for 24 h and by the USP recommended method. The 95% CI values for percent drug release for the USP calibrator tablets were similar to the reported tolerances for the USP Acceptance Ranges; however, individual results from 15 of 28 laboratories suggest that the apparatus would not comply with the USP Apparatus Suitability Criteria. For FDA prednisone calibrator tablets, percent drug release using equilibrated medium was different (P=0.003) than by the USP recommended method. For the glibenclamide tablet results, a CV of 14-37% was observed, depending upon the sampling time and the type of apparatus employed. The results indicate that failure to meet the USP Dissolution Apparatus Suitability Test may not truly mean that the apparatus is 'out of compliance'. Due to the high variability in dissolution testing, in many cases the impact of formulation or manufacturing changes on drug release characteristics may not be observed, in particular with multi-point profiles.

Chemistry, Pharmaceutical↗

PubMed1999

Influence of neutron irradiation on Eudragit coated tablets: validation of neutron activation II.

The in vitro characteristics of enteric coated acetylsalicylic acid tablets and cores were compared before and after irradiation with thermal neutrons, 2, 4, 7 or 15 min at 1.1.1013 neutrons cm-2s-I. The irradiation procedure affected the coated formulation to a greater extent than the cores. Drug release from tablets was already affected after 2 min of exposure, whereas the cores showed no significant inhibition of release until after 15 min of irradiation, leading to the conclusion that the effects of irradiation were caused by a combination of changes both in the core and the coating. Both tablets and cores showed an increase in the disintegration time following irradiation. Scanning electron micrographs (SEM) of non-irradiated cores/tablets and cores/tablets irradiated for 15 min, showed clear differences in the structure of the surface. SEM of the tablets irradiated for 15 min, showed that the irradiation had caused the film to loosen from the core in several places. SEM of the cross-sections of both irradiated tablets and cores showed a partially melted surface above stacked layers with reduced porosity.

Acrylic Resins↗

PubMed2001

Determination of the disintegration behavior of magnetically marked tablets.

The disintegration behavior of different tablets that were marked as magnetic dipoles by the incorporation of ferromagnetic black iron oxide and subsequent magnetization was studied using a specially developed measurement setup. This novel apparatus records the magnetic induction generated by the magnetic dipole moment of the tablets during their disintegration. It was found that the observed decrease of the magnetic induction can be used for a quantitative determination of the disintegration of tablets. In particular, it could be shown that the magnetic data provide information about the disintegration mechanism. For tablets with a minor influence of swelling on the disintegration mechanism a linear decline of the magnetic fluxes was observed. After addition of swelling disintegrants (crospovidone) the decline of the magnetic flux could be fitted by an exponential function, indicating the involvement of a disintegration force. Furthermore, the data demonstrate that using modern multichannel biomagnetic measurement equipment the monitoring of the disintegration behavior of magnetically marked tablets in humans will be possible.

Ferric Compounds↗

PubMed2003

A novel technique for imaging film coating defects in the film-core interface and surface of coated tablets.

Confocal laser scanning microscopy (CLSM) was introduced and examined as a novel technique for imaging film-core interface and surface defects of film-coated tablets. Tablets of acetylsalicylic acid, microcrystalline cellulose (MCC) and lactose monohydrate were film-coated with aqueous hydroxypropyl methylcellulose using an instrumented side-vented pan coater. The film coatings were applied using 100- and 500-kPa spraying air pressures. The CLSM images of the coating surface were compared with surface roughness measurements using a laser profilometer and an optical roughness analyzer. The spraying air pressure affected the film-core interface and the occurrence of coating defects. With the lower spraying pressure the aqueous coating solution penetrated into the tablet core, the core components migrated to the coating layer, and the film coating surface was clearly rougher compared to the higher spraying pressure. Storage at 25 degrees C/60% RH or 40 degrees C/75% RH for 3 months expanded the MCC-containing tablet core impaired the film structure and increased the film roughness. Based on the present results, CLSM is an effective tool for imaging film-core interface and surface defects of film-coated tablets. The CLSM images are supported by the results obtained with the other surface roughness measuring techniques.

Microscopy, Confocal↗

PubMed1998

Dependence between dissolution rate and porosity of compressed erythromycin acistrate tablets.

The correlation between dissolution rate and porosity of compressed erythromycin acistrate tablets was studied. The total porosity of the tablets, the pore size distribution and the specific surface area of the pores were determined using high-pressure mercury porosimetry. The particle size and specific surface area of the raw material and of the dry granulated mass of the tablets were also determined. The results show that the pore size distribution, showing the differences in pore structure, is more informative than total intruded volume of mercury. However, it is very difficult to explain the dissolution behaviour of erythromycin acistrate tablets only by porosity results of the tablets, and more work is still needed in this field.

Erythromycin↗

PubMed1998

Effect of ion exchange resins on the drug release from matrix tablets.

Ion exchange resins were incorporated into hydroxypropylmethylcellulose (HPMC) matrix tablets to modify the release of oppositely charged drugs. The drug release from HPMC tablets containing drug-resin complexes was significantly slower than from HPMC tablets containing drug without resin. A physical mixture of drug and ion exchange resin (cationic drug, propranolol HCl, with the cation exchange resin, Amberlite IRP 69, or the anionic drug, sodium diclofenac, with the anion exchange resin, cholestyramine (Duolite ATP-143)) resulted in almost the same drug release as tablets containing preformed drug-resin complexes. Upon contact with the dissolution medium, a gel layer formed rapidly around the solid tablet core and the complex between the drug and the resin formed in situ within the gelled regions. No effect of pH of the dissolution medium (0.1 N HCl or pH 7.4 phosphate buffer) or resin counterion was observed with the strong cation exchanger, Amberlite IRP 69. The resin was dissociated at both pH-values, allowing drug binding. With the weak cation exchange resin, Amberlite IRP 88, in situ complex formation and retardation was only observed in pH 7.4 buffer but not in 0.1 N HCl because of the non-ionization of the carboxyl groups. The drug release depended also on the amount and particle size of the resin particles and the type of carrier. The use of smaller resin particles eliminated the burst release seen with larger resin particles. Upon comparing different carrier materials, a rapid formation of the gel layer was important for the in situ complex formation. The drug release was in the order of Gelucire 54/02 (glyceryl palmitostearate) > polyethylene oxide 400K > HPMC K15M.

Adrenergic beta-Antagonists↗