SEARCH · PubMed Health

Results for “Tooth Apex”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources

PubMed2001

Digitization, analysis and processing of dental images during root canal preparation with Quantec Series 2000 instruments.

AIM: The aim of this study was to determine the shaping ability of Quantec Series 2000 nickel-titanium instruments in the mesio-buccal roots of maxillary first molars and the mesial roots of mandibular first molars. METHODOLOGY: A total of 20 canals were prepared with Quantec instruments, adopting the technique recommended by the manufacturer. Each canal was sectioned horizontally into four and the canal in each portion photographed before and after preparation. The images obtained were digitized and the increase in canal surface for each quadrant of the four sections was evaluated, along with the variation in centre of mass after instrumentation. RESULTS: Mechanical instrumentation of the canals generated mean centre of mass displacements that did not vary between sections, except for the mid-apical section, which showed significant mesial displacement, i.e. toward the side opposite the furcation. Thus, overall, the widening of the canal was symmetrical. CONCLUSIONS: Under the conditions of the study, the Quantec Series 2000 rotary system was simple and safe to use, and created good three-dimensional mechanical preparation of natural canals.

Confidence Intervals↗

PubMed2001

An in vitro study comparing root-end cavities prepared by diamond-coated and stainless steel ultrasonic retrotips.

AIM: This study compared the appearance of root-end cavity preparations and the time required to prepare them using prototype ultrasonic diamond-coated (DC) and stainless-steel (SS) retrotips. METHODOLOGY: In 12 maxillary and 12 mandibular molar teeth 48 root-end cavities were prepared ultrasonically in the palatal, mesio-buccal, distal and mesial root-ends using DC and SS retrotips, alternately. Replicas of the resected root tips and the root-end cavities were examined under a scanning electron microscope (SEM), recording (i) incidence and extent of dentine cracks (ii) minimum remaining thickness of the dentine walls and (iii) surface quality of the resected root-ends. The time taken to complete the preparation was also recorded. Means of these parameters were compared for both types of retrotips using nonparametric tests. RESULTS: No resected root-ends had cracks before preparation. However, after preparation one root-end cavity shaped by an SS retrotip had a microcrack visible at 23x magnification. Four and seven other root-ends had crazed surfaces in the DC and SS groups, respectively (P > 0.05). Remaining minimum dentine thickness was 0.56 +/- 0.28 mm and 0.71 +/- 0.24 for the DC and SS groups, respectively, and this difference was significant (P < 0.05). A root-end cavity in one specimen in the DC group was perforated. Preparation times ranged from 25 s to 361 s and were significantly lower for DC tips (P < 0.01) than the SS tips. The time required to prepare root-end cavities also differed between roots; root-end preparation in mandibular molars was more time consuming. CONCLUSIONS: A better quality surface was produced by the prototype diamond-coated retrotips, in less time than the SS retrotips, which in turn caused fewer cracks than previously reported. DC retrotips removed more dentine than SS retrotips and should therefore be used with care to avoid overpreparation or perforation.

Apicoectomy↗

PubMed2001

Root canal systems of the mandibular and maxillary first permanent molar teeth of south Asian Pakistanis.

AIM: The purpose of the present ex vivo study was to investigate variations in the root canal systems of mandibular and maxillary first permanent molar teeth of South Asian Pakistanis. METHODOLOGY: The root canal systems of a sample of 30 mandibular and 30 maxillary first permanent molar teeth extracted from South Asian Pakistanis were studied using a clearing technique. RESULTS: The mesial roots of the mandibular molar teeth typically presented with two canals (97%) of type II, IV or VI configuration. The distal roots of these teeth presented with a single canal (50%) of type I or V configuration or with two canals (50%) of type II, IV or VI. The prevalence of four root canals in two-rooted mandibular first permanent molar teeth was 47%. In maxillary molar teeth the mesial roots with a single canal (47%) were type I or type V; those with two canals (53%) were type II, IV or type VI. The distal and palatal roots that presented as a single canal (100%) were type I or type V configuration. The prevalence of four root canals in three-rooted maxillary first permanent molar teeth was 53%. CONCLUSION: It is concluded that four root canals in mandibular and maxillary first permanent molar teeth of South Asian Pakistanis is a common occurrence. The distribution of the different configurations of root canal systems in this population differed from that in Caucasian groups, suggesting that variations in root canal systems may be attributed to racial divergence.

Carbon↗

PubMed2001

The standardized-taper root canal preparation--part 5. GT file technique in small root canals.

AIM: To describe the shaping of Small Root canals with GT files. SUMMARY: Small Roots are lower incisors, two and three canal bicuspids, buccal roots of upper molars, and mesial roots of lower molars. The Shaping Objective instrument for such cases is usually a 0.08 or 0.06 taper GT file. After proper access, pulp tissue should be removed to prevent its compaction and canal blockage. Orifice shaping and smoothing is then achieved with a 35-0.12 accessory GT File, running at full slow-speed r.p.m. (5-20K).Crown-down preparation commences with the 0.10 GT file, followed by the 0.08 and 0.06 tapers as needed. Occasionally, a 20-0.04 Profile is required to reach length. Files are rotated at 300 r.p.m. with steady, light pressure, and withdrawn frequently for cleaning and inspection. Once one of these files has cut to length, the canal terminus is enlarged to Shaping Objective. If difficulty is encountered, be willing to accept a 0.06 instead of the original 0.08 taper Shaping Objective. If the terminal diameter is 0.2 mm you will have plenty of apical resistance form in a tortuous canal with the 0.06 taper preparation. It is definitely better to end up with a smaller shape than originally planned, than to experience the heartache of separation. KEY LEARNING POINTS: Small Root canals should be prepared to a Shaping Objective 0.08 or 0.06 taper. Pulp tissue should be removed before preparation to prevent compaction and blockage. Preparation follows in a crown-down sequence, and may occasionally require the use of small Profiles. Final apical shaping is easily achieved when root length is reached.

Bicuspid↗

PubMed2001

The influence of preparation technique and sodium hypochlorite on removal of pulp and predentine from root canals of posterior teeth.

AIM: To test the null hypothesis that removal of pulp tissue and predentine from root canals of multirooted teeth is not significantly different when performed by one of two mechanical preparation techniques in conjunction with either water or 3% sodium hypochlorite (NaOCl) irrigation. METHODOLOGY: Forty-six freshly extracted premolar or molar teeth, with pulps vital at the time of extraction, were assigned to four groups balanced by anatomy (group 1, step-back filing/NaOCl; group 2, step-back filing/water; group 3, automated rotary/NaOCl; group 4, automated rotary/water). Preparation was undertaken by a single operator and the volumes of irrigant recorded for each tooth. One root from each tooth was prepared for transverse histological assessment at eight levels, including one at and two apical to the working length. A validated index was used to measure the presence and location of residual pulp tissue and predentine. RESULTS: No statistically significant differences were found in the frequency with which residual pulp tissue or predentine were observed amongst the groups. Coronal parts were more frequently devoid of pulp tissue and predentine than the apical. Canals were frequently occluded with residual pulp tissue apical to the working length. There was a trend for better pulp and predentine removal in accessible parts of the canal as a function of rotary preparation and NaOCl irrigation. The isthmus had residual pulp tissue less frequently in the NaOCl groups. Accessory anatomy was unaffected regardless of technique or irrigant. CONCLUSIONS: Pulp tissue and predentine removal were not significantly different between a step-back filing and an automated rotary preparation technique in conjunction with water or NaOCl.

Bicuspid↗

PubMed2002

Electronic determination of root canal length in primary teeth with and without root resorption.

AIM: To test an electrical device for determining root canal length in primary teeth in vitro, and to compare it with the radiographic length measurement. METHODOLOGY: Two examiners determined the root canal length of 24 extracted maxillary primary incisors (12 with visible root resorption and 12 without) using an electrical root canal meter (Tri Auto ZX, Morita, Dietzenbach, Germany). The instrument was left in the root canal after the second examination and a radiograph was taken. The whole tooth was cleared by immersion in methylsalicylate and subsequently photographed. Both radiographs and photographs of cleared teeth were measured and compared with the electronic measurements. RESULTS: The evaluation of the radiographs showed a mean distance between the instrument tips and apices of 0.60 (+/- 0.41) mm; evaluation of the cleared teeth showed an equivalent distance of 0.62 (+/- 0.40) mm. The mean distance between instrument tip and acceptable working length (determined with the clearing method) was 0.26 (+/- 0.24) mm in teeth without resorption and 0.29 (+/- 0.30) mm in teeth with resorption. CONCLUSION: The presence of resorption in primary teeth did not affect the accuracy of electrical measurement of root canal length in vitro. The application of this method in primary teeth should be evaluated further.

Confidence Intervals↗

PubMed2002

Root and canal morphology of Thai maxillary molars.

AIM: To investigate the root and canal morphology of 268 maxillary permanent molars collected from an indigenous Thai population. METHODOLOGY: The cleaned teeth were accessed, the pulp dissolved by sodium hypochlorite under ultrasonication, and the pulp system injected with Indian ink. The teeth were rendered clear by demineralization and immersion in methyl salicylate. The following observations were made: (i) number of roots and their morphology; (ii) number of root canals per root; (iii) root-canal configuration in each root using Vertucci's classification with additional modifications; and (iv) presence and location of lateral canals and intercanal communications. RESULTS: All the maxillary first and second molars had three separate roots. Only, half (51%) of the maxillary third molars had three separate roots; the other half had fused or conical roots. The majority of the distobuccal (98.1-100%) and palatal (100%) roots had type I canals. Over half of the mesiobuccal roots of first (65%) and second (55%) molars had two canals. The most common (44.2%) canal configuration in mesiobuccal roots of first molars was type IV (two canals, two foramina). A variety of canal types were found in the mesiobuccal roots of second molars. Maxillary third molars showed the greatest diversity of canal morphology. There was an increase in the prevalence of lateral canals towards the apical part of the roots and intercanal communications were present in 16% of each of first, second and third Thai maxillary molars. CONCLUSIONS: The mesiobuccal roots of Thai maxillary molars possessed a variety of canal system types. Over 50% of the first molars had a second mesiobuccal canal. The palatal and distobuccal canals mainly had type I canals. Only, a small proportion (7.3-13.3%) of the roots exhibited lateral canals which were the most common in the apical third

Carbon↗

PubMed2002

Clinical and macroscopic study of maxillary molars with two palatal roots.

AIM: To report an anatomical variation in maxillary first molars. SUMMARY: A case report is presented of a maxillary first molar requiring root-canal treatment that had two palatal roots with distinct canals and foramena at the apical level. Root-canal treatment was performed using mechanical instrumentation with NiTi files. An anatomical study on two extracted maxillary second molars with the same variation revealed their internal structure. This case demonstrates an uncommon anatomical condition and supplements previous reports of such cases affecting maxillary molars. KEY LEARNING POINTS: Clinicians should be aware of uncommon anatomical variations in maxillary molars. The majority of maxillary first molars have three roots and four canals. Maxillary molars may have two canals in the palatal root.

Adult↗

PubMed2002

The effect of instrument type and preflaring on apical file size determination.

AIM: The aim of this study was to investigate the effect of instrument type (K-files and Lightspeed (LS) instruments) and the impact of preflaring on the first file size that binds at working length (WL) in a range of canal types of varying sizes and curvatures. METHODOLOGY: One hundred and twenty-one canals from 60 extracted intact human maxillary and mandibular premolars and molars were utilized. After standard access cavities, a size 6 K-file was inserted into each canal until the tip of the file was visible outside the apical foramen. WL were set 0.5 mm short of these measurements. Each canal was sized using consecutively larger K-files and hand-held LS instruments until one bound at WL. The file sizes were recorded. The same procedures were repeated after coronal and middle third flaring using Profile rotary instruments. RESULTS: Statistical analysis (univariate analysis of variance: ANOVA) showed that overall, the estimate of mean apical diameter with the LS instrument was larger than with the K-file by 9.4 x 10(-2) mm (P < 0.001; 95% confidence interval: 8.7 x 10(-2), 10.2 x 10(-2)), i.e. almost 2 ISO file sizes larger. Flaring of the cervical and middle thirds of the canal had an impact on apical sizing by both types of instruments, with an average increase of 5.3 x 10(-2) mm (P < 0.001; 95% confidence interval: 4.5 x 10(-2), 6.0 x 10(-2)), i.e. approximately 1 ISO file size larger. CONCLUSIONS: Preflaring and use of hand-held LS instruments resulted in an increase in the instrument size that bound at WL. If an operator wishes to determine an accurate master apical file size, canal orifice enlargement should be performed first before the placement of the assessment file.

Analysis of Variance↗

PubMed2003

Diagnostic accuracy of endoscopy in periradicular surgery - a comparison with scanning electron microscopy.

AIM: To compare the accuracy of endoscopic diagnostics with the scanning electron microscope (SEM) in evaluating elements of periradicular surgery. METHODOLOGY: The material consisted of 22 extracted human molars, which were subjected to the following treatments: orthograde root-canal obturation, root-end resection and root-end cavity preparation with diamond-coated sonic microtips. After each step, the cut root face was inspected with an endoscope, and subsequently, the roots were duplicated for SEM evaluation. Endoscope findings were compared to those obtained with SEM serving as the 'gold standard' with a blinded observer. The presence of the following structures was assessed including specificity and sensitivity: isthmuses, accessory canals, obturation gaps, microfractures and chipping of cavity margins. RESULTS: The specificity and sensitivity of the identification of isthmuses or accessory canals was 100% each for the endoscope compared to SEM. The sensitivity of identification of obturation gaps, crack formation or chipping ranged between 73 and 95% (except intradentine cracks with only 36% sensitivity). The specificity of the same parameters ranged between 77 and 100% for the endoscope compared to SEM. CONCLUSIONS: With the exception of intradentine cracks, the endoscope accurately identified microstructures following root-end resection and root-end preparation. The endoscope could be considered for use during intraoperative diagnostics in periradicular surgery.

Apicoectomy↗

PubMed2003

Measurement of periapical pressure created by occlusal loading.

AIM: To develop an in vitro model in which the pressure in the periapical tissues can be measured during loading. METHODOLOGY: Extracted human maxillary central incisors were embedded in resin blocks that had physical characteristics similar to those of bone and periodontal ligament. Each tooth was loaded with 20, 40, 50, 60, 75, 85, 100, 200, 300 and 450 N vertical forces from the incisal edge of the crown on three consecutive occasions. A minute resistor embedded in the periapical space was used to detect apical pressure changes during occlusal loading. The ratio of apical pressure changes (DeltaP) to the loading force changes (DeltaF) was calculated. RESULTS: The periapical pressure detected was in direct proportion to the loading force. The mean value of DeltaP/DeltaF was 5.994 kPa N-1 (SD = 2.04). CONCLUSIONS: Direct proportionality was found between the coronal loading and the apical hydrostatic pressure. The DeltaP/DeltaF ratio determined in this study makes it easier to estimate the apical hydrostatic pressure values during occlusal loading of single-rooted teeth. In this study, the apical pressure generated under occlusal loading was the same magnitude as that estimated with the finite element method.

Alveolar Process↗

PubMed2003

Bacterial status in root-filled teeth exposed to the oral environment by loss of restoration and fracture or caries--a histobacteriological study of treated cases.

AIM: To describe histological and microbiological findings in teeth where root fillings had been exposed to caries and the oral environment for a prolonged period. METHODOLOGY: For inclusion in the study, only teeth with a follow-up period of 3 years or more and those that had been without proper restoration for at least a period of 3 months were considered. Some root fillings had been without restoration for several years. In all, 39 roots representing 32 teeth were examined by histology. RESULTS: The majority of the specimens were without a discernible periapical bone lesion as assessed by radiography. Osteolytic lesions were seen with five roots. Longitudinal tissue sections stained with a modified Brown/Brenn staining technique revealed presence of stainable bacteria in abundance at the canal entrance and in dentinal tubules but were absent mid-root and apically in all but two specimens. Soft tissue attached to the root tip and in apical ramifications displayed distinct inflammatory cell infiltrates, suggesting microbial exposure in 7 of the 39 roots examined. In all other specimens, inflammatory cell infiltrates were either nonexistent or sparse and then associated with extruded sealer material. CONCLUSIONS: Well-prepared and filled root canals resist bacterial penetration even upon frank and long-standing oral exposure by caries, fracture or loss of restoration.

Adolescent↗

PubMed2000

A natural tooth's stress distribution in occlusion with a dental implant.

The loss of one or more teeth is normally treated with conventional fixed or removable partial dentures or with implant supported fixed or removable dentures. This study investigated stresses formed around the implant and the antagonist natural tooth under occlusal force in the substitution of a missing lower first molar with a rigid or resilient IMZ (Intra Mobil Zylinder) implant, using the finite element stress analysis method. The results indicate that a bite force of 143 N resulted in high compressive stresses around the roots of a natural tooth opposing a restoration supported by an IMZ implant with rigid type abutment. It is speculated that these high compressive stresses may contribute to intrusion of the tooth.

Bite Force↗

PubMed2001

Eruption of third permanent molars after the extraction of second permanent molars. Part 1: Assessment of third molar position and size.

The eruptive path of third molars after extraction of second molars was examined in 63 patients. Panoramic radiographs from the start and the end of active treatment and 3 or more years after treatment were assessed. Study models were used to compare the size of the second and third molars and to assess the final position of the third molars. All third molars erupted; none became impacted. During eruption, maxillary third molar crowns uprighted and maintained their angulation as they came into occlusion. Mandibular third molar crowns continued to upright significantly mesiodistally after active treatment, with space closure the result of horizontal translation rather than mesial tipping. Further uprighting occurred once occlusion was established, although few became as upright as the second molars they replaced. However, mandibular third molar roots were frequently curved distally, thus the third molar crown position was invariably better than the overall tooth angulation would suggest, by 16.5 degrees on average. Model analysis (Richardsons' scoring system) showed 96% of mandibular and 99% of maxillary third molars erupted into a good or acceptable position. Limitations of this scoring system are discussed. The mesiodistal size of third molars was suitable to replace second molars; on average, mandibular third molars were 0.55 mm larger and maxillary third molars were 0.7 mm smaller than second molars.

Adolescent↗

PubMed2001

The relationship between radiologic interpretation and root tip fracture during tooth extraction performed by junior clinicians.

OBJECTIVES: The purpose of this study was to analyze the relationship between root tip fracture and radiologic interpretation of root morphology on periapical radiographs during third molar extraction performed by junior clinicians. METHODS: Before tooth extraction, periapical radiographs of 107 patients with 116 third molars were evaluated by junior clinicians, all with less than 5 years of clinical experience. Radiologic interpretations of root morphology-including number, curvature, fusion, and accessory root-were recorded before each extraction. The clinicians were also asked to estimate the possibility of root fracture on a Visual Analogue Scale before the procedure. The exact morphology of the extracted teeth was recorded after the extraction for the purpose of comparison. RESULTS: Twenty-nine of 116 teeth extracted were not correctly interpreted in at least 1 of the morphologic categories surveyed. The average expected fracture rate of nonfractured teeth was 23.1%, whereas the average expected fracture rate of fractured teeth was a significantly higher 50.3%. Misinterpretation of root morphology on radiographs decreased with increased clinical experience. Senior residents had the lowest misinterpretation and fracture rate. Logistic regression analysis showed that fracture is most closely related to the estimated fracture rate (4.95) and is also significantly related to underestimation of root curvature (0.95; 24.56 with 2 df of chi-square, P = .0001). CONCLUSIONS: Misinterpretation of root morphology on radiographs occurred in 25% of the teeth. Root curvature was the most misinterpreted item studied. Fracture was most closely related to the estimated fracture rate. Junior clinicians in this study expected that only 50% of the fractured teeth would fracture, reflecting a general underestimation of root tip fracture. Further study should be performed to evaluate how to increase the accuracy of root curvature interpretation.

Clinical Competence↗

PubMed2002

A mouse model of inflammatory root resorption induced by pulpal infection.

OBJECTIVE: The present study was undertaken to determine the frequency and extent of apical root resorption associated with induced periradicular lesions in mice. STUDY DESIGN: Bone and root resorption was quantified by using two- and three-dimensional micro-computed tomography (mu-CT) in the lower first molars of mice subjected to pulp exposure and infection. RESULTS: mu-CT measurements showed significant apical resorption in exposed and infected teeth, resulting in an average distal root shortening of 12.7% (P <.001 vs unexposed). These findings were confirmed with three-dimensional reconstituted images that showed thinning and shortening of the distal root. Tartrate-resistant acid phosphatase clastic cells were associated with resorption lacunae on the cementum of root apices, as well as on bone at the periphery of the periradicular lesions. Brown and Brenn staining showed the presence of bacteria in dentinal tubules adjacent to resorbed cementum. CONCLUSIONS: Apical root resorption is a prominent and consistent finding associated with periradicular infection in the mouse. This species represents a convenient model for studying the pathogenesis of inflammatory root resorption in vivo.

Acid Phosphatase↗

PubMed2002

Apicomarginal defects in periradicular surgery: classification and diagnostic aspects.

The prognosis of periradicular surgery is affected by the amount and location of bone loss. Apicomarginal defects are localized bony defects encompassing the total root length, and periradicular surgery on these teeth is associated with a lower success rate. This paper reviews the etiology, pathogenesis, and morphology of apicomarginal defects as encountered in periradicular surgery on the basis of a series of 24 consecutively treated patients. Periodontal data were recorded before surgery in all patients, and apicomarginal defects were diagnosed after flap reflection or, if applicable, apicoectomy. On the basis of the findings in these cases and on theoretic considerations, a classification system for apicomarginal defects with potential therapeutic and prognostic implications is presented and several criteria for differential diagnosis are discussed.

Adolescent↗

PubMed2003

Periapical and periodontal healing after osseous grafting and guided tissue regeneration treatment of apicomarginal defects in periradicular surgery: results after 12 months.

OBJECTIVE: The aim of the present study was to evaluate the periapical and periodontal healing of apicomarginal defects 12 months after periradicular surgery and guided tissue regeneration in a series of consecutively treated patients. STUDY DESIGN: Patients with apicomarginal defects who were referred for periradicular surgery were included. Apicomarginal defects were grafted with Bio-Oss bone mineral and covered with a Bio-Gide membrane. Periodontal probing depths (PPDs) and relative attachment levels were measured preoperatively and 12 months postoperatively with a manual force-controlled probe. Periapical healing was assessed clinically and radiographically. RESULTS: Of the 23 defects in 22 patients for whom follow-up data were available, 19 were considered clinically and radiographically successful, 2 were doubtful, and 2 were failures. Overall, the baseline median PPD decreased from 9.0 mm to 3.0 mm, corresponding to a median relative attachment level gain of 2.8 mm. In the case of periodontic-endodontic lesions, the median baseline PPD decreased from 9.8 mm to 4.0 mm, corresponding to a median relative attachment level gain of 4.2 mm. Defects that involved a proximal root surface had a significantly higher residual PPD than did defects not involving a proximal root surface. CONCLUSIONS: Guided tissue regeneration treatment of apicomarginal defects yields good results in terms of periapical and periodontal healing after 12 months and should be considered as an adjunct to periradicular surgery in such cases.

Adolescent↗