PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Xanthobacter”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources

Pathway dependent isotopic fractionation during aerobic biodegradation of 1,2-dichloroethane.

1,2-Dichloroethane (1,2-OCA) is a widespread groundwater contaminant known to be biodegradable under aerobic conditions via enzymatic oxidation or hydrolytic dehalogenation reactions. Current literature reports that stable carbon isotope fractionation of 1,2-DCA during aerobic biodegradation is large and reproducible (-27 to -33/1000). In this study, a significant variation in the magnitude of stable carbon isotope fractionation during aerobic biodegradation was observed. Biodegradation in experiments involving microcosms, enrichment cultures, and pure microbial cultures produced a consistent bimodal distribution of enrichment factors (epsilon) with one mean epsilon centered on -3.9 +/- 0.6/1000 and the other on -29.2 +/- 1.9/1000. Reevaluation of epsilon in terms of kinetic isotope effects 12k/13k gave values of 12k/13k = 1.01 and 1.06, which are typical of oxidation and hydrolytic dehalogenation (S(N)2) reactions, respectively. The bimodal distribution is therefore consistent with the microbial degradation of 1,2-DCA by two separate enzymatic pathways. This interpretation is further supported in this study by experiments with pure strains of Xanthobacter autotrophicus GJ10, Ancylobacter aquaticus AD20, and Pseudomonas sp. Strain DCA1 for which the enzymatic degradation pathways are well-known. A small fractionation of -3.0/1000 was measured for 1,2-DCA degradation by Pseudomonas sp. Strain DCA1 (monooxygenase enzyme), while degradation by the hydrolytic dehalogenase enzyme by the other two pure strains was characterized by fractionation of -32.3/1000.

Biodegradation, Environmental↗

An oil-absorber-bioscrubber system to stabilize biotreatment of pollutants present in waste gas. Fluctuating loads of 1,2-dichloroethane.

Biotreatment technologies offer a cost-effective and efficient method for dealing with point-source releases of solvents. However, a major problem hampering these technologies is the fluctuating pollutant loads, which is especially critical for inhibitory pollutants. Provision of biotreatment systems able to cope with this problem is a significant technological and environmental challenge. This study investigates the potential for an absorber to act as buffer for shock loadings of inhibitory pollutants in waste-gas streams undergoing biological treatment. 1,2-Dichloroethane (DCE) was used as an example of a toxic and inhibitory organic pollutant. The stability of a combined oil-absorber-bioscrubber (OAB) system was compared to that of a bioscrubber only (BO) system when each was subjected to shock loads of DCE. The BO system was inoculated with Xanthobacter autotrophicus strain GJ10 and was submitted to sharp, sequential pulses in DCE inlet load, which caused system instability. Complete inhibition of the BO process occurred for a 3 h DCE pulse, leading to 9125 g of DCE m(-3)bioscrubber total organic discharged (TODDCE). Following the pulse, fluorescence in situ hybridization (FISH) showed that the active strain GJ10 was effectively washed-out. In contrast, the performance of the OAB system was stable during DCE shock loads. The carbon dioxide production remained stable, and low levels of effluent DCE and total organic carbon concentrations were found. For the 3 h pulse TODDCE was only 173 g of DCE m(-3)bioscrubber, and FISH indicated that the GJ10 strain remained active. We conclude that the OAB system offers an effective solution to the biological treatment of waste-gas containing fluctuating pollutant concentrations.

Air Pollutants↗

Chlorine kinetic isotope effects on the haloalkane dehalogenase reaction.

We have found chlorine kinetic isotope effects on the dehalogenation catalyzed by haloalkane dehalogenase from Xanthobacter autotrophicus GJ10 to be 1.0045 +/- 0.0004 for 1,2-dichloroethane and 1.0066 +/- 0.0004 for 1-chlorobutane. The latter isotope effect approaches the intrinsic chlorine kinetic isotope effect for the dehalogenation step. The intrinsic isotope effect has been modeled using semiempirical and DFT theory levels using the ONIOM QM/QM scheme. Our results indicate that the dehalogenation step is reversible; the overall irreversibility of the enzyme-catalyzed reaction is brought about by a step following the dehalogenation.

Algorithms↗

Comparative binding energy analysis of haloalkane dehalogenase substrates: modelling of enzyme-substrate complexes by molecular docking and quantum mechanical calculations.

We evaluate the applicability of automated molecular docking techniques and quantum mechanical calculations to the construction of a set of structures of enzyme-substrate complexes for use in Comparative binding energy (COMBINE) analysis to obtain 3D structure-activity relationships. The data set studied consists of the complexes of eighteen substrates docked within the active site of haloalkane dehalogenase (DhlA) from Xanthobacter autotrophicus GJ10. The results of the COMBINE analysis are compared with previously reported data obtained for the same dataset from modelled complexes that were based on an experimentally determined structure of the DhlA-dichloroethane complex. The quality of fit and the internal predictive power of the two COMBINE models are comparable, but better external predictions are obtained with the new approach. Both models show a similar composition of the principal components. Small differences in the relative contributions that are assigned to important residues for explaining binding affinity differences can be directly linked to structural differences in the modelled enzyme-substrate complexes: (i) rotation of all substrates in the active site about their longitudinal axis, (ii) repositioning of the ring of epihalohydrines and the halogen substituents of 1,2-dihalopropanes, and (iii) altered conformation of the long-chain molecules (halobutanes and halohexanes). For external validation, both a novel substrate not included in the training series and two different mutant proteins were used. The results obtained can be useful in the future to guide the rational engineering of substrate specificity in DhlA and other related enzymes.

Binding Sites↗

Comparison of formation of reactive conformers for the SN2 displacements by CH3CO2- in water and by Asp124-CO2- in a haloalkane dehalogenase.

The S(N)2 displacement of Cl(-) from 1,2-dichloroethane by acetate (CH(3)CO(2)(-)) in water and by the carboxylate of the active site aspartate in the haloalkane dehalogenase of Xanthobacter autothropicus have been compared by using molecular dynamics simulations. In aqueous solution, six families of contact-pair structures (I-VI) were identified, and their relative concentrations and dissociation rate constants were determined. The near attack conformers (NACs) required for the S(N)2 displacement reaction are members of the IV (CH(3)COO(-)...CH(2)(Cl)CH(2)Cl) family and are formed in the sequence II-->III-->IV-->NAC. The NAC subclass is defined by the COO(-)...CCl contact distance of < or = 3.41 A and the COO(-)...CCl angle of 157-180 degrees. The mole percentage of NACs is 0.16%, based on the 1 M standard state. This result may be compared with 13.4 mole percentage of NACs in the Michaelis complex in the enzyme. It follows that NAC formation in the enzyme is favored by 2.6 kcal/mol. Because reaction coordinates from S to TS, both in water and in the enzyme, pass via NAC (i.e., S --> NAC --> TS), the reduction in the S --> NAC barrier by 2.6 kcal/mol accounts for approximately 25% of the reduction of total barrier in the S --> TS (10.7 kcal/mol). The remaining 75% of the advantage of the enzymatic reaction revolves around the efficiency of NAC --> TS step. This process, based on previous studies, is discussed briefly.

Acetates↗

The importance of reactant positioning in enzyme catalysis: a hybrid quantum mechanics/molecular mechanics study of a haloalkane dehalogenase.

Hybrid quantum mechanics/molecular mechanics calculations using Austin Model 1 system-specific parameters were performed to study the S(N)2 displacement reaction of chloride from 1,2-dichloroethane (DCE) by nucleophilic attack of the carboxylate of acetate in the gas phase and by Asp-124 in the active site of haloalkane dehalogenase from Xanthobacter autotrophicus GJ10. The activation barrier for nucleophilic attack of acetate on DCE depends greatly on the reactants having a geometry resembling that in the enzyme or an optimized gas-phase structure. It was found in the gas-phase calculations that the activation barrier is 9 kcal/mol lower when dihedral constraints are used to restrict the carboxylate nucleophile geometry to that in the enzyme relative to the geometries for the reactants without dihedral constraints. The calculated quantum mechanics/molecular mechanics activation barriers for the enzymatic reaction are 16.2 and 19.4 kcal/mol when the geometry of the reactants is in a near attack conformer from molecular dynamics and in a conformer similar to the crystal structure (DCE is gauche), respectively. This haloalkane dehalogenase lowers the activation barrier for dehalogenation of DCE by 2-4 kcal/mol relative to the single point energies of the enzyme's quantum mechanics atoms in the gas phase. S(N)2 displacements of this sort in water are infinitely slower than in the gas phase. The modest lowering of the activation barrier by the enzyme relative to the reaction in the gas phase is consistent with mutation experiments.

Acetates↗

Crystal structures of intermediates in the dehalogenation of haloalkanoates by L-2-haloacid dehalogenase.

The L-2-haloacid dehalogenase from the 1,2-dichloroethane-degrading bacterium Xanthobacter autotrophicus GJ10 catalyzes the hydrolytic dehalogenation of small L-2-haloalkanoates to their corresponding D-2-hydroxyalkanoates, with inversion of the configuration at the C(2) atom. The structure of the apoenzyme at pH 8 was refined at 1.5-A resolution. By lowering the pH, the catalytic activity of the enzyme was considerably reduced, allowing the crystal structure determination of the complexes with L-2-monochloropropionate and monochloroacetate at 1.7 and 2.1 A resolution, respectively. Both complexes showed unambiguous electron density extending from the nucleophile Asp(8) to the C(2) atom of the dechlorinated substrates corresponding to a covalent enzyme-ester reaction intermediate. The halide ion that is cleaved off is found in line with the Asp(8) Odelta1-C(2) bond in a halide-stabilizing cradle made up of Arg(39), Asn(115), and Phe(175). In both complexes, the Asp(8) Odelta2 carbonyl oxygen atom interacts with Thr(12), Ser(171), and Asn(173), which possibly constitute the oxyanion hole in the hydrolysis of the ester bond. The carboxyl moiety of the substrate is held in position by interactions with Ser(114), Lys(147), and main chain NH groups. The L-2-monochloropropionate CH(3) group is located in a small pocket formed by side chain atoms of Lys(147), Asn(173), Phe(175), and Asp(176). The size and position of the pocket explain the stereospecificity and the limited substrate specificity of the enzyme. These crystallographic results demonstrate that the reaction of the enzyme proceeds via the formation of a covalent enzyme-ester intermediate at the nucleophile Asp(8).

Amino Acid Sequence↗

Generating segmental mutations in haloalkane dehalogenase: a novel part in the directed evolution toolbox.

Directed evolution techniques allow us to genuinely mimic molecular evolution in vitro. To enhance this imitation of natural evolutionary processes on a laboratory scale in even more detail, we developed an in vitro method for the generation of random deletions and repeats. The pairwise fusion of two fragments of the same gene that are truncated by exonuclease BAL-31 either at the 3' or 5' side results in a deletion or a repeat at the fusion point. Although in principle the method randomly covers the whole gene, it can also be limited to a predefined area in the sequence by controlling the level of the initial truncation. To test the procedure and to illustrate its potential, we used haloalkane dehalogenase from Xanthobacter autotrophicus GJ10 (DhlA) as a model enzyme, since the adaptation of this enzyme towards new substrates is known to occur via the generation of this type of mutation. The results show that the mutagenesis method presented here is an effective tool for accessing formerly unexplorable sequence space and can contribute to the success of future directed evolution experiments.

Amino Acid Sequence↗

Analysis of the reaction mechanism and substrate specificity of haloalkane dehalogenases by sequential and structural comparisons.

Haloalkane dehalogenases catalyse environmentally important dehalogenation reactions. These microbial enzymes represent objects of interest for protein engineering studies, attempting to improve their catalytic efficiency or broaden their substrate specificity towards environmental pollutants. This paper presents the results of a comparative study of haloalkane dehalogenases originating from different organisms. Protein sequences and the models of tertiary structures of haloalkane dehalogenases were compared to investigate the protein fold, reaction mechanism and substrate specificity of these enzymes. Haloalkane dehalogenases contain the structural motifs of alpha/beta-hydrolases and epoxidases within their sequences. They contain a catalytic triad with two different topological arrangements. The presence of a structurally conserved oxyanion hole suggests the two-step reaction mechanism previously described for haloalkane dehalogenase from Xanthobacter autotrophicus GJ10. The differences in substrate specificity of haloalkane dehalogenases originating from different species might be related to the size and geometry of an active site and its entrance and the efficiency of the transition state and halide ion stabilization by active site residues. Structurally conserved motifs identified within the sequences can be used for the design of specific primers for the experimental screening of haloalkane dehalogenases. Those amino acids which were predicted to be functionally important represent possible targets for future site-directed mutagenesis experiments.

Amino Acid Sequence↗

Crystal structure of the probable haloacid dehalogenase PH0459 from Pyrococcus horikoshii OT3.

PH0459, from the hyperthermophilic archaeon Pyrococcus horikoshii OT3, is a probable haloacid dehalogenase with a molecular mass of 26,725 Da. Here, we report the 2.0 A crystal structure of PH0459 (PDB ID: 1X42) determined by the multiwavelength anomalous dispersion method. The core domain has an alpha/beta structure formed by a six-stranded parallel beta-sheet flanked by six alpha-helices and three 3(10)-helices. One disulfide bond, Cys186-Cys212, forms a bridge between an alpha-helix and a 3(10)-helix, although PH0459 seems to be an intracellular protein. The subdomain inserted into the core domain has a four-helix bundle structure. The crystal packing suggests that PH0459 exists as a monomer. A structural homology search revealed that PH0459 resembles the l-2-haloacid dehalogenases l-DEX YL from Pseudomonas sp. YL and DhlB from Xanthobacter autotrophicus GJ10. A comparison of the active sites suggested that PH0459 probably has haloacid dehalogenase activity, but its substrate specificity may be different. In addition, the disulfide bond in PH0459 probably facilitates the structural stabilization of the neighboring region in the monomeric form, although the corresponding regions in l-DEX YL and DhlB may be stabilized by dimerization. Since heat-stable dehalogenases can be used for the detoxification of halogenated aliphatic compounds, PH0459 will be a useful target for biotechnological research.

Amino Acid Sequence↗

Nitrate-dependent anaerobic carbon monoxide oxidation by aerobic CO-oxidizing bacteria.

Two dissimilatory nitrate-reducing (Burkholderia xenovorans LB400 and Xanthobacter sp. str. COX) and two denitrifying isolates (Stappia aggregata IAM 12614 and Bradyrhizobium sp. str. CPP), previously characterized as aerobic CO oxidizers, consumed CO at ecologically relevant levels (<100 ppm) under anaerobic conditions in the presence, but not absence, of nitrate. None of the isolates were able to grow anaerobically with CO as a carbon or energy source, however, and nitrate-dependent anaerobic CO oxidation was inhibited by headspace concentrations >100-1000 ppm. Surface soils collected from temperate, subtropical and tropical forests also oxidized CO under anaerobic conditions with no lag. The observed activity was 25-60% less than aerobic CO oxidation rates, and did not appear to depend on nitrate. Chloroform inhibited anaerobic but not aerobic activity, which suggested that acetogenic bacteria may have played a significant role in forest soil anaerobic CO uptake.

Aerobiosis↗

Characterization of 2-bromoethanesulfonate as a selective inhibitor of the coenzyme m-dependent pathway and enzymes of bacterial aliphatic epoxide metabolism.

Bacterial growth with short-chain aliphatic alkenes requires coenzyme M (CoM) (2-mercaptoethanesulfonic acid), which serves as the nucleophile for activation and conversion of epoxide products formed from alkene oxidation to central metabolites. In the present work the CoM analog 2-bromoethanesulfonate (BES) was shown to be a specific inhibitor of propylene-dependent growth of and epoxypropane metabolism by Xanthobacter autotrophicus strain Py2. BES (at low [millimolar] concentrations) completely prevented growth with propylene but had no effect on growth with acetone or n-propanol. Propylene consumption by cells was largely unaffected by the presence of BES, but epoxypropane accumulated in the medium in a time-dependent fashion with BES present. The addition of BES to cells resulted in time-dependent loss of epoxypropane degradation activity that was restored upon removal of BES and addition of CoM. Exposure of cells to BES resulted in a loss of epoxypropane-dependent CO(2) fixation activity that was restored only upon synthesis of new protein. Addition of BES to cell extracts resulted in an irreversible loss of epoxide carboxylase activity that was restored by addition of purified 2-ketopropyl-CoM carboxylase/oxidoreductase (2-KPCC), the terminal enzyme of epoxide carboxylation, but not by addition of epoxyalkane:CoM transferase or 2-hydroxypropyl-CoM dehydrogenase, the enzymes which catalyze the first two reactions of epoxide carboxylation. Comparative studies of the propylene-oxidizing actinomycete Rhodococcus rhodochrous strain B276 showed that BES is an inhibitor of propylene-dependent growth in this organism as well but is not an inhibitor of CoM-independent growth with propane. These results suggest that BES inhibits propylene-dependent growth and epoxide metabolism via irreversible inactivation of the key CO(2)-fixing enzyme 2-KPCC.

1-Propanol↗

Structure-specificity relationships for haloalkane dehalogenases.

A structural analysis of the substrate specificity of hydrolytic dehalogenases originating from three different bacterial isolates has been performed using the multiple computer-automated structure evaluation methodology. This methodology identifies structural fragments in substrate molecules that either activate or deactivate biological processes. The analysis presented in this contribution is based on newly measured dehalogenation data combined with data from the literature (91 substrates). The enzymes under study represent different specificity classes of haloalkane dehalogenases (haloalkane dehalogenase from Xanthobacter autotrophicus GJ10, Rhodococcus erythropolis Y2, and Sphingomonas paucimobilis UT26). Three sets of structural rules have been identified to explain their substrate specificity and to predict activity for untested substrates. Predictions of activity and inactivity based on the structural rules from this analysis were provided for those compounds that were not yet tested experimentally. Predictions were also made for the compounds with available experimental data not used for the model construction (i.e., the external validation set). Correct predictions were obtained for 28 of 30 compounds in the validation set. Incorrect predictions were noted for two substrates outside the chemical domain of the set of compounds for which the structural rules were generated. A mechanistic interpretation of the structural rules generated provided a fundamental understanding of the structure-specificity relationships for the family of haloalkane dehalogenases.

Biodegradation, Environmental↗

Bacterial composition of the biofilm on the surface of course sediment of the Danube: with special reference to the clinically important bacteria.

On monthly intervals and over a period of 14 months (November, 1993-December, 1994) biofilm samples from sediments taken at the Szentendre Island on the Danube were culturel and the isolated organisms were examined macromorphologically and micromorphogically and tested for oxidase and catalase production and their ability to oxidise and ferment glucose. The majority (85%) of the strains isolated were catalase positive. 43% were oxidase positive, 38% were glucose oxidisers and only 19% fermented glucose. In the sediment upmost biofilm layers Gram-negatives dominate (10 samples out of 14). A representative set strains has been subjected to complete identification using the Biolog automated identification system. The coryneform bacteria (e.g. Arthrobacter spp.) and members of the genus Rhodococcus dominated the Gram-positive bacteria while the dominant Gram-negative bacteria were facultative H2 autotrophs, methylotrophs (e.g. Xanthobacter flavus, Hydrogenophaga spp.) and different Aeromonas, Enterobacter and Pseudomonas species. Because the water supply of Budapest (the capital of Hungary) comes from bankwall filtred Danube water resources, the presence of clinically important microorganisms (i.e. Aeromonas, Enterobacter, Pseudomonas and Rhodococcus spp) in the Danube-sediments may pose a public health problem to the users (in particular the immunocompromised) of such water supplies.

Aeromonas↗

Overexpression of a heterologous protein, haloalkane dehalogenase, in a poly-beta-hydroxybutyrate-deficient strain of the facultative methylotroph Methylobacterium extorquens AM1.

Using an expression vector containing p(mxaF'), a strong native promoter, expression of a model heterologous protein, haloalkane dehalogenase, from Xanthobacter autotrophicus GJ10 was achieved in the methylotrophic bacterium, Methylobacterium extorquens AM1. Although expression using the wild-type strain was <5% of total cell protein, expression at a level of 10% of the total cell protein was achieved in a mutant unable to synthesize poly-beta-hydroxybutyrate granules. Two other tested heterologous proteins, catechol dioxygenase and green fluorescent protein, were expressed at moderate levels in both wild-type and the PHB-negative strain. These results suggest that the M. extorquens PHB-negative strain is a possible platform for overexpression of heterologous proteins with labeled or unlabeled methanol as a starting material.

Catechol 1,2-Dioxygenase↗

Crystal structure of haloalkane dehalogenase: an enzyme to detoxify halogenated alkanes.

Haloalkane dehalogenase from Xanthobacter autotrophicus GJ10 converts 1-haloalkanes to the corresponding alcohols and halide ions with water as the sole cosubstrate and without any need for oxygen or cofactors. The three-dimensional structure has been determined by multiple isomorphous replacement techniques using three heavy atom derivatives. The structure has been refined at 2.4 A resolution to an R-factor of 17.9%. The monomeric enzyme is a spherical molecule and is composed to two domains: domain I has an alpha/beta type structure with a central eight-stranded mainly parallel beta-sheet. Domain II lies like a cap on top of domain I and consists of alpha-helices connected by loops. Except for the cap domain the structure resembles that of the dienelactone hydrolase in spite of any significant sequence homology. The putative active site is completely buried in an internal hydrophobic cavity which is located between the two domains. From the analysis of the structure it is suggested that Asp124 is the nucleophilic residue essential for the catalysis. It interacts with His289 which is hydrogen-bonded to Asp260.

Amino Acid Sequence↗

Closely related form I ribulose bisphosphate carboxylase/oxygenase molecules that possess different CO2/O2 substrate specificities.

The deduced primary sequence (cbbL and cbbS) of form I ribulose 1, 5-bisphosphate carboxylase/oxygenase (rubisco) from Bradyrhizobium japonicum places this enzyme within the Type IC subgroup of red-like rubisco enzymes. In addition, B. japonicum appears to organize most of the structural genes of the Calvin-Benson-Bassham (CBB) pathway in at least one major operon. Functional expression and characterization of the B. japonicum and Xanthobacter flavus enzymes from this group revealed that these molecules exhibit diverse kinetic properties despite their relatively high degree of sequence relatedness. Of prime importance was the fact that these closely related enzymes exhibited CO2 and O2 substrate specificities that varied from relatively low values [tau = (VcKo)/(VoKc) = 45] to values that approximated those obtained for higher plants (tau = 75). These results, combined with the metabolic and genetic versatility of the organisms from which these enzymes were derived, suggest a potential rich resource for future biological selection and structure-function studies aimed at elucidating structural features that govern key enzymological properties of rubisco.

Amino Acid Sequence↗

Refined X-ray structures of haloalkane dehalogenase at pH 6.2 and pH 8.2 and implications for the reaction mechanism.

The crystal structure of haloalkane dehalogenase from Xanthobacter autotrophicus GJ10 has been refined at 1.9 A resolution at two different pH values, the pH of crystallization (pH 6.2) and the pH of optimal activity (pH 8.2), to final R-factors of 16.8% and 16.4%, respectively. Both models show good stereochemical quality. Two non-glycine residues have main-chain torsion angles that are located outside the "allowed" regions in a Ramachandran plot. One of them is the nucleophilic residue Asp124, which, together with the two other active site residues His289 and Asp260, is situated in an internal, predominantly hydrophobic cavity. The other residue, Asn148, helps stabilize the conformations of two of these active-site residues, Asp124 and Asp260. Comparison of the models at pH 6.2 and pH 8.2 revealed one major structural difference. At pH 6.2, a salt-bridge is present between the N epsilon 2 atom of His289 and the O delta 1 atom of Asp124, while at pH 8.2, this salt-bridge is absent, indicating that the N epsilon 2 atom of the histidine residue is mostly deprotonated at the pH of optimum activity. This is in agreement with the putative reaction mechanism in which the O delta 1 atom of Asp124 performs a nucleophilic attack on the substrate, resulting in an intermediate ester. This ester is subsequently cleaved by a hydrolytic water molecule. The high-resolution data sets clearly show the exact position of this water molecule. It is in an ideal position for donating a proton to the N epsilon 2 atom of His289 and subsequently cleaving the covalently bound intermediate ester, releasing the alcohol product. Detailed investigation of both refined models showed a number of unusual structural features. Four out of 11 helices contain an internal proline residue other than in the first turn. Two other alpha-helices have adopted in their central part a 3(10) conformation. A novel four-residue turn between a helix and a strand, the alpha beta 4 turn, is located at the site of the bend in the central eight-stranded beta-sheet of the dehalogenase structure.

Amino Acid Sequence↗