PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “leaf angle”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
PubMed2002

Verification of multileaf collimator leaf positions using an electronic portal imaging device.

An automated method is presented for determining individual leaf positions of the Siemens dual focus multileaf collimator (MLC) using the Siemens BEAMVIEW(PLUS) electronic portal imaging device (EPID). Leaf positions are computed with an error of 0.6 mm at one standard deviation (sigma) using separate computations of pixel dimensions, image distortion, and radiation center. The pixel dimensions are calculated by superimposing the film image of a graticule with the corresponding EPID image. A spatial correction is used to compensate for the optical distortions of the EPID, reducing the mean distortion from 3.5 pixels (uncorrected) per localized x-ray marker to 2 pixels (1 mm) for a rigid rotation and 1 pixel for a third degree polynomial warp. A correction for a nonuniform dosimetric response across the field of view of the EPID images is not necessary due to the sharp intensity gradients across leaf edges. The radiation center, calculated from the average of the geometric centers of a square field at 0 degrees and 180 degrees collimator angles, is independent of graticule placement error. Its measured location on the EPID image was stable to within 1 pixel based on 3 weeks of repeated extensions/retractions of the EPID. The MLC leaf positions determined from the EPID images agreed to within a pixel of the corresponding values measured using film and ionization chamber. Several edge detection algorithms were tested: contour, Sobel, Roberts, Prewitt, Laplace, morphological, and Canny. These agreed with each other to within < or = 1.2 pixels for the in-air EPID images. Using a test pattern, individual MLC leaves were found to be typically within 1 mm of the corresponding record-and-verify values, with a maximum difference of 1.8 mm, and standard deviations of <0.3 mm in the daily reproducibility. This method presents a fast, automatic, and accurate alternative to using film or a light field for the verification and calibration of the MLC.

Algorithms↗
PubMed1993

Measurement possibilities using an electronic portal imaging device.

A vital role in the quality control of radiotherapy is the use of portal imaging for verifying field size, shape, orientation and patient set-up. Coincidence of treated volume and target volume is imperative. Electronic portal imaging devices are effective at providing this verification. However, these devices are versatile enough to be used in other ways pertinent to the delivery of high quality, high precision radiotherapy. This paper examines two such ways: in assessing the reproducibility of a multileaf collimator system, and in determining exit doses in vivo. Configured as a dosimeter, the system shows a linear response with good dynamic range. Its high spatial resolution was used to show that leaf positioning was reproducible to within 0.5 mm for all tested gantry and collimator angles. Our preliminary results from this exit dosimetry technique demonstrate that, under specific conditions, doses can be determined to within 2.5% of that measured using silicon diodes or ion chambers.

Humans↗
PubMed1993

Simulated influence of leaf geometry on sunlight interception and photosynthesis in conifer needles.

The light interception capabilities of individual conifer needles are governed by their cross-sectional geometry and their orientation to sunlight. Leaf cross sections typical of conifer tree species were modeled to quantify the interception of direct sunlight over a range of incident light angles. The needle shapes exhibited by Abies nordmanniana Spach, Picea asperata Master, Pinus cembra L., P. monophylla Torr & Frém., and P. sylvestris L. were selected because they are representative of the range of geometric shapes found in conifer tree species. Calculated light interception values were compared to corresponding predictions for a laminar broadleaf. Estimates of carbon gain were derived from computed incident light integrated over the leaf cross section and a representative curve of conifer photosynthetic response to light. Flat leaf cross sections (e.g., Abies nordmanniana) with high surface area to volume ratios (> 6) intercepted more light per unit area at high angles of incidence than thick leaves. Thick leaves (e.g., Pinus cembra) intercepted more light at low angles of incidence than at high angles of incidence. Needles of Pinus monophylla had no angular dependence for light interception because of their circular cross section. Large differences in estimated CO(2) assimilation occurred among the species, especially when CO(2) uptake was expressed on a unit volume basis. A maximum uptake of 67.9 mmol CO(2) m(-3) s(-1) was predicted for A. nordmanniana compared to a minimum of 39.7 mmol m(-3) s(-1) for P. monophylla. A greater angular dependence occurred for estimates of CO(2) uptake than for estimates of light interception.

Journal Article↗
PubMed2006

Automatic online adaptive radiation therapy techniques for targets with significant shape change: a feasibility study.

This work looks at the feasibility of an online adaptive radiation therapy concept that would detect the daily position and shape of the patient, and would then correct the daily treatment to account for any changes compared with planning position. In particular, it looks at the possibility of developing algorithms to correct for large complicated shape change. For co-planar beams, the dose in an axial plane is approximately associated with the positions of a single multi-leaf collimator (MLC) pair. We start with a primary plan, and automatically generate several secondary plans with gantry angles offset by regular increments. MLC sequences for each plan are calculated keeping monitor units (MUs) and number of segments constant for a given beam (fluences are different). Bulk registration (3D) of planning and daily CT images gives global shifts. Slice-by-slice (2D) registration gives local shifts and rotations about the longitudinal axis for each axial slice. The daily MLC sequence is then created for each axial slice/MLC leaf pair combination, by taking the MLC positions from the pre-calculated plan with the nearest rotation, and shifting using a beam's-eye-view calculation to account for local linear shifts. A planning study was carried out using two head and neck region MR images of a healthy volunteer which were contoured to simulate a base-of-tongue treatment: one with the head straight (used to simulate the planning image) and the other with the head tilted to the left (the daily image). Head and neck treatment was chosen to evaluate this technique because of its challenging nature, with varying internal and external contours, and multiple degrees of freedom. Shape change was significant: on a slice-by-slice basis, local rotations in the daily image varied from 2 to 31 degrees, and local shifts ranged from -0.2 to 0.5 cm and -0.4 to 0.0 cm in right-left and posterior-anterior directions, respectively. The adapted treatment gave reasonable target coverage (100%, 90% and 80% of the base-of-tongue, left nodes and right nodes, respectively, receiving the daily prescription dose), and kept the daily cord dose below the limit used in the original plan (65%, equivalent to 46 Gy over 35 fractions). Most of the loss of coverage was due to one shoulder being raised more superior relative to the other shoulder compared with the plan. This type of skew-like motion is not accounted for by the proposed ART technique. In conclusion, this technique has potential to correct for fairly extreme daily changes in patient setup, but some control of the daily position would still be necessary. Importantly, it was possible to combine treatments from different plans (MLC sequences) to correct for position and shape change.

Algorithms↗
PubMed2002

A dosimetric comparison of various multileaf collimators.

The dosimetric characteristics of three multileaf collimator (MLC) systems (Elekta, Siemens and Varian) having 10 mm leaf width are compared. A 6 MV photon beam was used from each unit for measurements. Film dosimetry was performed for the measurements and the analysis techniques were exactly duplicated in each system. Two of the collimators have rounded leaf ends (Elekta and Varian) and the third (Siemens) has a flat end that follows beam divergence. A scanning densitometer (Wellhöfer with 0.45 mm spot and 0.5 mm step size) was used for film analysis. The dosimetric characteristics studied include: penumbra width (80-20%) as a function of position of the leaf end in the field, inter- and intra-leaf radiation leakage, dose distribution of the tongue and groove, and isodose curves for stepped leaves forming 45 degrees angle beam edge. Results show that MLC designs with divergent and non-divergent leaves produce penumbra (80-20%) widths that are within 2.0 mm of each other. However, the distance of the collimator from the x-ray target plays an important role, and the smallest penumbra width was noted for the Varian MLC despite its rounded leaf-end design. Compared to the other systems, this collimator is positioned about 15 cm closer to the patient which affects the skin dose. The MLC with flat leaf end, although closer to the target, showed slightly poorer penumbra width. Inter-leaf leakage through the leaves is 1.3% for two of the collimators (Elekta and Varian) with the backup jaws and is nearly 1% for the third system (Siemens). The Siemens MLC produces reduced tongue-and-groove effect compared to the other two collimators (Elekta and Varian). The isodose undulation for a stepped edge is found to be significant for the collimator closest to the patient (Varian) and does not depend on the leaf-end shape. There is no perfect MLC system that can be recommended, rather each one has unique advantages and disadvantages that should be weighed with comfort, ease and cost effectiveness for clinical use.

Radiometry↗
PubMed2004

The Lotus effect: superhydrophobicity and metastability.

To learn how to mimic the Lotus effect, superhydrophobicity of a model system that resembles the Lotus leaf is theoretically discussed. Superhydrophobicity is defined by two criteria: a very high water contact angle and a very low roll-off angle. Since it is very difficult to calculate the latter for rough surfaces, it is proposed here to use the criterion of a very low wet (solid-liquid) contact area as a simple, approximate substitute for the roll-off angle criterion. It is concluded that nature employs metastable states in the heterogeneous wetting regime as the key to superhydrophobicity on Lotus leaves. This strategy results in two advantages: (a) it avoids the need for high steepness protrusions that may be sensitive to breakage and (b) it lowers the sensitivity of the superhydrophobic states to the protrusion distance.

Letter↗
PubMed1994

Crown architecture of understory and open-grown white pine (Pinus strobus L.) saplings.

Crown architecture and growth allocation were studied in saplings of eastern white pine (Pinus strobus L.), a species classified as intermediate in shade tolerance. A comparison was made of 15 understory saplings and 15 open-grown saplings that were selected to have comparable heights (mean of 211 cm, range of 180-250 cm). Mean ages of understory and open-grown trees were 25 and 8 years, respectively. Understory trees had a lower degree of apical control, shorter crown length, and more horizontal branch angle, resulting in a broader crown shape than that of open-grown trees. Total leaf area was greater in open-grown saplings than in understory saplings, but the ratio of whole-crown silhouette (projected) leaf area to total leaf area was significantly greater in understory pine (0.154) than in open-grown pine (0.128), indicating that the crown and shoot structure of understory trees exposed a greater percentage of leaf area to direct overhead light. Current-year production of understory white pine was significantly less than that of open-grown white pine, but a higher percentage of current-year production was allocated to foliage in shoots of understory saplings. These modifications in crown structure and allocation between open-grown and understory white pine saplings are similar to those reported for more shade-tolerant fir (Abies) and spruce (Picea) species, but the modifications were generally smaller in white pine. As a result, white pine did not develop the flat-topped "umbrella" crown structure observed in understory fir and spruce, which approaches the idealized monolayer form that maximizes light interception. The overall change to a broader crown shape in understory white pine was qualitatively similar, but much more limited than the changes that occurred in fir and spruce. This may prevent white pine from persisting in understory shade as long as fir and spruce saplings.

Journal Article↗
PubMed2003

[Effect of cutting periodicity on energy allocation and architecture of Trifolium repens].

On the subtropical mountain swards, the effect of cutting periodicity on energy allocation, module density, number of branches and branching angle of T. repens were significant, With cutting periodicity raised, the energy allocation of stolon increased steadly, the caloric content of unit stolon dropped gradually, and the changing pattern of leaf density, stem density, branch number and internode's length was from low to high, and then to low. The branching intensity of T. repens ranged from 15 to 23.7 branches.m-2, and branching angle raried from 49.5 degrees to 60.2 degrees while the cutting periodicity differed.

Energy Metabolism↗
PubMed2002

Constitutive property of the local organization of leaf venation networks.

The leaf venation of dicotyledons forms complex patterns. In spite of their large variety of morphologies these patterns have common features. They are formed of a hierarchy of structures, which are connected to form a reticulum. Excellent images of these patterns can be obtained from leaves from which the soft tissues have been removed. A numerical image processing has been developed, specially designed for a quantitative analysis of this type of network. It provides a precise characterization of its geometry. The resulting data reveals a surprising property of reticula's nodes: the angles between vein segments are very well defined and it is shown that they are directly related by the radii of the segments. The relation between radii and angles can be expressed very simply using a phenomenological analogy to mechanics. This local organization principle is universal; all leaf venation patterns studied show the same behavior. The results are compared with physical networks such as fracture arrays or soap froth in terms of hierarchy and reorganization.

Biophysical Phenomena↗
PubMed2006

A topographic leaf-sequencing algorithm for delivering intensity modulated radiation therapy.

Topographic treatment is a radiation therapy delivery technique for fixed-gantry (nonrotational) treatments on a helical tomotherapy system. The intensity-modulated fields are created by moving the treatment couch relative to a fan-beam positioned at fixed gantry angles. The delivered dose distribution is controlled by moving multileaf collimator (MLC) leaves into and out of the fan beam. The purpose of this work was to develop a leaf-sequencing algorithm for creating topographic MLC sequences. Topographic delivery was modeled using the analogy of a water faucet moving over a collection of bottles. The flow rate per unit length of the water from the faucet represented the photon fluence per unit length along the width of the fan beam, the collection of bottles represented the pixels in the treatment planning fluence map, and the volume of water collected in each bottle represented the delivered fluence. The radiation fluence per unit length delivered to the target at a given position is given by the convolution of the intensity distribution per unit length over the width of the beam and the time per unit distance along the direction of travel that an MLC leaf is open. The MLC opening times for the desired dose profiles were determined using a technique based on deconvolution using a genetic algorithm. The MLC opening times were expanded in terms of a Fourier series, and a genetic algorithm was used to find the best expansion coefficients for a given dose distribution. A series of wedge shapes (15, 30, 45, and 60 deg) and "dose well" test fluence maps were created to test the algorithm's ability to generate topographic leaf sequences. The accuracy of the leaf-sequencing algorithm was measured on a helical tomotherapy system using radiographic film placed at depth in water equivalent material. The measured dose profiles were compared with the desired dose distributions. The agreement was within +/- 2% or 2 mm distance-to-agreement (DTA) in the high dose gradient regions for all test cases. The central axis measured dose was between 3.6% and 4.2% higher than the expected dose for the wedge cases. For the "dose well" test cases, the calculated and measured doses agreed to within +/- 0.5% at the peak and within +/- 1.6% in the "dose well." The topographic leaf-sequencing algorithm produced deliverable dose distributions that agreed well with the calculated dose distributions. This delivery technique could be used for treatment of whole intact breast. However, additional work is needed to further improve the algorithm in order to get better agreement between the calculated, deliverable, and measured dose distributions.

Algorithms↗
PubMed2005

Electrochemical growth of two-dimensional gold nanostructures on a thin polypyrrole film modified ITO electrode.

Two-dimensional gold nanostructures have been fabricated by electrochemical deposition of gold nanoparticles onto indium tin oxide (ITO) glass substrate modified with thin polypyrrole film. By controlling the electrodeposition conditions, gold nanoparticles with dendritic rod, sheet, flower-like (consisting of staggered nanosheets), and pinecone-like structures were generated. The flower-like gold nanoparticles showed high catalytic activity on electrochemical reduction of oxygen, and its activity was measured to be approximately 25 times that of gold pinecones and 10(4) times that of gold nanosheets in terms of gold weight. The pinecone-like nanoparticles can form a compact film with nano-/microscale binary structure like a lotus leaf surface. After modification with n-dodecanethiol, the surface showed superhydrophobic properties with a water contact angle of 153.4 degrees and a tilt angle of 4.4 degrees (5 microL droplet).

Journal Article↗
PubMed2005

Dosimetric characteristics of the Elekta Beam Modulator.

The dosimetric characteristics of a production pilot multi-leaf collimator (Elekta Beam Modulator, Elekta Oncology Systems, Crawley, UK) having a 4 mm leaf width (at isocentre) have been investigated. Characteristics explored included leaf bank set-up, penumbra width (80-20%) as a function of leaf position, leaf positioning reproducibility, interleaf leakage and leaf transmission. The penumbra values for leaf ends were measured to be between 4.2 and 4.8 mm for various large rectangular fields studied using Kodak X-omat V film at isocentre (1.5 cm deep). Similar films were taken with a standard 1 cm width multi-leaf collimator (MLC) and the penumbra for leaf ends was found to range from 4.3 to 5.2 mm. Other results showed that the rounded leaf tip provided tight control of the penumbra across the leaves' full range of travel. The positioning of the leaves was within a 0.5 mm range when approaching from the same direction. The maximum interleaf leakage was found to be 1.7% and the average leaf transmission less than 1.0%. No major differences were observed in leakage and transmission with changing gantry angle.

Film Dosimetry↗
PubMed2006

[The field shape optimization in conformal radiation therapy by MLC rotation].

Conformal radiation therapy using multi-leaf collimator (MLC) is considered as a conventional technology in the hospital nowadays. However the stepped leaf edge caused by the finite width of the leaves could influence the conformality that could be achievable. In this paper, the effect produced by rotating the collimator angle on the conformality was investigated. A method, in which multiple MLC fields of various rotation angles are applied, has been proposed to have the targets be more uniformly irradiated and thus to eliminate the cold spots on the targets and hot spots in normal tissues. By simulation, it has been shown that the multiple MLC field method can eliminate the stepped leaf edges and improve the conformality significantly, moreover, the PTV can receive a more uniform delivery with cold spot eliminated.

Humans↗
PubMed2006

"Artificial lotus leaf" prepared using a 1945 patent and a commercial textile.

Two polyester textiles, conventional polyester and microfiber polyester fabrics, were hydrophobized using a simple, patented water-repellent silicone coating procedure. Water contact angles on these two surfaces are theta(A)/theta(R) = 151 degrees/140 degrees and theta(A)/theta(R) = 170 degrees/165 degrees, respectively. A smooth surface of this of this coating exhibits theta(A)/theta(R) = 110 degrees/100 degrees. The binary length scale topography (approximately 2 microm/ approximately 50 microm) of the microfiber polyester is responsible for relieving receding contact line pinning and promoting water repellency that is superior to that of the lotus leaf. The recent literature on superhydrophobic surfaces is criticized for neglecting literature of the 1940s.

Journal Article↗
PubMed2006

Influence of surface roughness on superhydrophobicity.

Superhydrophobic surfaces, with a liquid contact angle theta greater than 150 degrees , have important practical applications ranging from self-cleaning window glasses, paints, and fabrics to low-friction surfaces. Many biological surfaces, such as the lotus leaf, have a hierarchically structured surface roughness which is optimized for superhydrophobicity through natural selection. Here we present a molecular dynamics study of liquid droplets in contact with self-affine fractal surfaces. Our results indicate that the contact angle for nanodroplets depends strongly on the root-mean-square surface roughness amplitude but is nearly independent of the fractal dimension D(f) of the surface.

Journal Article↗
PubMed2002

The effects of surfactants on adhesion, spreading, and retention of herbicide droplet on the surface of the leaves and seeds.

Droplet adhesion, spreading, and retention on leaf and seed surfaces are studied in the presence of surfactants for successful formulation of a herbicide whereby efficient coverage, less wastage, and environment protection are achieved. Cationic, anionic, and nonionic surfactants, e.g., HTAB, SDBS, and tergitol, were added to water and the static contact angle of water droplet was measured on cauliflower, cabbage, spinach leaves, French bean, wheat, and Bengal gram seeds. Droplet adhesion, spreading, and retention were analysed in terms of static contact angle and physical properties of the system. The presence of a small quantity (0.1 wt.%) of tergitol in water increased the adhesion, spreading, and retention of droplet on all leaf and seed surfaces tested. Tergitol, a nonionic surfactant, is likely to be adsorbed more than the ionic surfactants HTAB and SDBS at the water/leaf (or seed)/air interface since plant leaves and seeds are nonionic in nature. The addition of 0.1% wt. of tergitol to a common herbicide, derosal, increases the adhesion, spreading, and retention of derosal on leaf and seed surfaces, consequently, efficient coverage and minimum wastage are attained.

Adhesiveness↗
PubMed2006

Estimating yields of salt- and water-stressed forages with remote sensing in the visible and near infrared.

In arid irrigated regions, the proportion of crop production under deficit irrigation with poorer quality water is increasing as demand for fresh water soars and efforts to prevent saline water table development occur. Remote sensing technology to quantify salinity and water stress effects on forage yield can be an important tool to address yield loss potential when deficit irrigating with poor water quality. Two important forages, alfalfa (Medicago sativa L.) and tall wheatgrass (Agropyron elongatum L.), were grown in a volumetric lysimeter facility where rootzone salinity and water content were varied and monitored. Ground-based hyperspectral canopy reflectance in the visible and near infrared (NIR) were related to forage yields from a broad range of salinity and water stress conditions. Canopy reflectance spectra were obtained in the 350- to 1000-nm region from two viewing angles (nadir view, 45 degrees from nadir). Nadir view vegetation indices (VI) were not as strongly correlated with leaf area index changes attributed to water and salinity stress treatments for both alfalfa and wheatgrass. From a list of 71 VIs, two were selected for a multiple linear-regression model that estimated yield under varying salinity and water stress conditions. With data obtained during the second harvest of a three-harvest 100-d growing period, regression coefficients for each crop were developed and then used with the model to estimate fresh weights for preceding and succeeding harvests during the same 100-d interval. The model accounted for 72% of the variation in yields in wheatgrass and 94% in yields of alfalfa within the same salinity and water stress treatment period. The model successfully predicted yield in three out of four cases when applied to the first and third harvest yields. Correlations between indices and yield increased as canopy development progressed. Growth reductions attributed to simultaneous salinity and water stress were well characterized, but the corrections for effects of varying tissue nitrogen (N) and very low leaf area index (LAI) are necessary.

Agriculture↗