PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Phase Separation”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70Linked to original sources

Artificial multiple criticality and phase equilibria: an investigation of the PC-SAFT approach.

The perturbed-chain statistical associating fluid theory (PC-SAFT) is studied for a wide range of temperature, T, pressure, p, and (effective) chain length, m, to establish the generic phase diagram of polymers according to this theory. In addition to the expected gas-liquid coexistence, two additional phase separations are found, termed "gas-gas" equilibrium (at very low densities) and "liquid-liquid" equilibrium (at densities where the system is expected to be solid already). These phase separations imply that in one-component polymer systems three critical points occur, as well as equilibria of three fluid phases at triple points. However, Monte Carlo simulations of the corresponding system yield no trace of the gas-gas and liquid-liquid equilibria, and we conclude that the latter are just artefacts of the PC-SAFT approach. Using PC-SAFT to correlate data for polybutadiene melts, we suggest that discrepancies in modelling the polymer density at ambient temperature and high pressure can be related to the presumably artificial liquid-liquid phase separation at lower temperatures. Thus, particular care is needed in engineering applications of the PC-SAFT theory that aims at predicting properties of macromolecular materials.

Algorithms↗

Composition and structure of whey protein/gum arabic coacervates.

Complex coacervation in whey protein/gum arabic (WP/GA) mixtures was studied as a function of three main key parameters: pH, initial protein to polysaccharide mixing ratio (Pr:Ps)(ini), and ionic strength. Previous studies had already revealed under which conditions a coacervate phase was obtained. This study is aimed at understanding how these parameters influence the phase separation kinetics, the coacervate composition, and the internal coacervate structure. At a defined (Pr:Ps)(ini), an optimum pH of complex coacervation was found (pH(opt)), at which the strength of electrostatic interaction was maximum. For (Pr:Ps)(ini) = 2:1, the phase separation occurred the fastest and the final coacervate volume was the largest at pH(opt) = 4.0. The composition of the coacervate phase was determined after 48 h of phase separation and revealed that, at pH(opt), the coacervate phase was the most concentrated. Varying the (Pr:Ps)(ini) shifted the pH(opt) to higher values when (Pr:Ps)(ini) was increased and to lower values when (Pr:Ps)(ini) was decreased. This phenomenon was due to the level of charge compensation of the WP/GA complexes. Finally, the structure of the coacervate phase was studied with small-angle X-ray scattering (SAXS). SAXS data confirmed that at pH(opt) the coacervate phase was dense and structured. Model calculations revealed that the structure factor of WP induced a peak at Q = 0.7 nm(-1), illustrating that the coacervate phase was more structured, inducing the stronger correlation length of WP molecules. When the pH was changed to more acidic values, the correlation peak faded away, due to a more open structure of the coacervate. A shoulder in the scattering pattern of the coacervates was visible at small Q. This peak was attributed to the presence of residual charges on the GA. The peak intensity was reduced when the strength of interaction was increased, highlighting a greater charge compensation of the polyelectrolyte. Finally, increasing the ionic strength led to a less concentrated, a more heterogeneous, and a less structured coacervate phase, induced by the screening of the electrostatic interactions.

Gum Arabic↗

Chemical profile of adhesive/caries-affected dentin interfaces using Raman microspectroscopy.

In clinical practice, dentists must frequently bond adhesives to caries-affected dentin substrates, but the bond that characteristically forms with these substrates does not provide the durability necessary for long-term clinical function. The purpose of this study was to characterize and compare the interfacial chemistry of adhesive with caries-affected and noncarious dentin using micro-Raman spectroscopy. The results indicated that the differences in the Raman spectra between noncarious and caries-affected dentin could not be accounted for by simple decreased mineralization. Both the structure of collagen and mineral in the caries-affected dentin has been altered by the caries process. The differences in structure and composition not only interfered with acid-etching process but also subsequent resin monomer penetration. It was shown that the interface between the adhesive and caries-affected dentin was wider and more complicated than that of the adhesive and noncarious dentin. As a result of adhesive phase separation, a structurally integrated hybrid layer did not form at the interface with either caries-affected or noncarious dentin. Using chemical imaging techniques, this study provides the direct evidence of adhesive phase separation at the interface with caries-affected dentin. Although our group previously reported adhesive phase separation at the interface with noncarious dentin, the chemistry of caries-affected dentin leads to greater variability and a more highly irregular composition along the length and breadth of the interface.

Adult↗

Phase transition in the ABC model.

Recent studies have shown that one-dimensional driven systems can exhibit phase separation even if the dynamics is governed by local rules. The ABC model, which comprises three particle species that diffuse asymmetrically around a ring, shows anomalous coarsening into a phase separated steady state. In the limiting case in which the dynamics is symmetric and the parameter q describing the asymmetry tends to one, no phase separation occurs and the steady state of the system is disordered. In the present work, we consider the weak asymmetry regime q=exp(-beta/N), where N is the system size, and study how the disordered state is approached. In the case of equal densities, we find that the system exhibits a second-order phase transition at some nonzero beta(c). The value of beta(c)=2pi square root 3 and the optimal profiles can be obtained by writing the exact large deviation functional. For nonequal densities, we write down mean-field equations and analyze some of their predictions.

Journal Article↗

Drug microencapsulation by PLA/PLGA coacervation in the light of thermodynamics. 2. Parameters determining microsphere formation.

Phase separation (frequently called coacervation) of poly(lactide) (PLA) and poly(lactide-co-glycolide) (PLGA) is a classical method for drug microencapsulation. Here, attempts have been made to describe this process in the light of thermodynamics. Different PLA/PLGAs were dissolved in either dichloromethane or ethyl acetate, phase separated by addition of the coacervating agent silicone oil (PDMS), and hardened in either octamethylcyclotetrasiloxane or hexane. Various stages of phase separation were defined microscopically, and the coacervate and continuous phases characterized with respect to volume, composition, polymer molecular weight, and rheological behavior. The optimal amount of PDMS was inversely proportional to the polymer molecular weight and hydrophilicity, and a coacervate viscosity of above 5-10 Pa s was required for stable coacervate droplets. The composition and, consequently, viscosity of the coacervate and continuous phases depended on the polymer-solvent-PDMS interactions, as analyzed by the parameters chi (Flory), delta (Hildebrand), and delta(int)E (Hô). In general, the lattice model of FIory and Scott describing polymer-polymer incompatibility best explained the results. The interaction parameters and viscosity of the phases were also helpful to explain microsphere characteristics such as residual solvent and particle size. The data suggest that microsphere formation by polyester coacervation is primarily driven by molecular interactions between polymer, solvents, and coacervating agent.

Drug Compounding↗

The influence of fatty acid unsaturation and physical properties of microsomal membrane phospholipids on UDP-glucuronyltransferase activity.

The relationship between lipid composition, the physical properties of microsomal phospholipids and the kinetics of liver UDP-glucuronyltransferase was studied in microsomes from guinea pigs supplied with a normal or a fat-free diet for 28 days. Fatty acid deficiency did not modify either the cholesterol/phospholipid molar ratio or the polar head group composition, but exclusively redistributed the unsaturated fatty acid pattern, by partially exchanging oleic for linoleic acid. This phenomenon accounts for the decrease of both rotational and translational mobilities of the fluorescent probes 1,6-diphenyl-1,3,5-hexatriene (DPH) and pyrene respectively. When the thermotropic behaviour of the different systems was assessed, no transition temperature (gel-liquid-crystalline) between 10 and 40 degrees C was seen as a consequence of the lower degree of unsaturation, either in the microsomal membranes or in the total lipid or total phospholipid extracts from the treated animals. In spite of this, the polarization ratio of trans-parinaric acid and the fluorescence intensity of merocyanine 540 revealed that a significant lateral phase separation occurred at 20-22 degrees C in the extracted phospholipids, which was smoother in the total lipid fractions and in the native microsomal membranes. Fatty acid deficiency caused an upward shift of the midpoint temperature of the lateral phase separation. Furthermore, the phosphatidylcholine extracted from the 'normal' microsomes showed a lateral phase separation centred at a lower temperature than that extracted from 'fat-deficient' microsomes. In contrast, the Arrhenius plot of UDP-glucuronyltransferase from 'normal' microsomes exhibited a change in slope at a higher temperature than that from treated microsomes. These results would suggest that fatty acid deficiency in guinea-pig liver microsomes, while rigidizing the bulk lipids, would segregate the most unsaturated phosphatidylcholine molecules towards the UDP-glucuronyltransferase microenvironment, in accordance with our previous results with cholesterol incorporation [Castuma & Brenner (1986) Biochemistry 25, 4733-4738].

Animals↗

Trifluoperazine induces domain formation in zwitterionic phosphatidylcholine but not in charged phosphatidylglycerol bilayers.

The interaction of trifluoperazine with the zwitterionic lipids dipalmitoylphosphatidylcholine and dimyristoylphosphatidylcholine and with anionic dimyristoylphosphatidylglycerol was studied by means of microcalorimetry and fluorescence spectroscopy. Intercalation of drug molecules into the lipid bilayers was confirmed by the observed differential scanning calorimetry peak broadening and the decrease in chain-melting temperatures. For trifluoperazine:lipid mole ratios higher than 0.4 and 0.6 (for dipalmitoylphosphatidylcholine and dimyristoylphosphatidylcholine, respectively) the deconvolution of transition profiles into two Gaussian components was possible, which suggests phase separation in the studied mixtures. Deconvolution of the thermograms was not possible for any of the drug:dimyristoylphosphatidylglycerol mole ratios studied. To confirm the existence of phase separation in trifluoperazine-phosphatidylcholine mixtures fluorescence spectroscopy experiments were performed using Laurdan as a probe. From the generalised polarisation versus excitation wavelength dependences, recorded at different temperatures, we conclude that a phase separation occurs in the gel state of the studied trifluoperazine-phosphatidylcholine mixtures. We attribute the existence of domains in the bilayer to the dissimilar interactions of two protonation forms of trifluoperazine with phosphatidylcholine molecules. Structural defects present at domain boundaries could be related to the trifluoperazine induced increase of membrane permeability and fluidity. This may partially explain the mechanism of multidrug resistance modulation by trifluoperazine.

1,2-Dipalmitoylphosphatidylcholine↗

Application of temperature-induced phase partitioning at ambient temperature for enzyme purification.

Aqueous two-phase partition and temperature-induced phase separation using a non-ionic, random copolymer composed of 20% ethylene oxide, 80% propylene oxide (EO20 PO80) has been used for purification of glucose-6-phosphate dehydrogenase, hexokinase and 3-phosphoglycerate kinase from bakers' yeast. This EO20PO80 copolymer has a cloud point of 18 degrees C, at which temperature it phase separates from water. Enzymes were first partitioned at 4 degrees C in an initial EO20PO80-dextran T500 aqueous two-phase system. This system had an upper copolymer-rich phase and a lower dextran-rich phase. After phase separation had occurred the upper EO20PO80-rich phase was removed and placed at 24 degrees C. This resulted in formation of a new two-phase system with an upper water phase and a lower phase containing 98% copolymer and 2% water. Enzymes were recovered exclusively in upper water phase leaving a polymer-rich lower phase free of contamination. The phase diagram for the system EO20PO80 and dextran T500 at 4 degrees C has been determined.

Chemical Phenomena↗

The interaction of spectrin-actin and synthetic phospholipids. II. The interaction with phosphatidylserine.

Sonicated vesicles of phosphatidylserine and phosphatidylserine/phosphatidylcholine mixtures were recombined with spectrin-actin from human erythrocyte ghosts. Morphological properties and physicochemical characteristics of the recombinates were studied with freeze etch electron microscopy, 31P NMR and differential scanning calorimetry. Sonicated dimyristoyl phosphatidylserine vesicles show a decrease in enthalpy change of the lipid phase transition upon addition of spectrin-actin. These vesicles collapse and fuse, into multilamellar structures in the presence of spectrin-actin, as demonstrated by freeze fracturing and NMR. Spectrin-actin cannot prevent the salt formation between phosphatidylserine and Ca2+, all phosphatidylserine is withdrawn from the lipid phase transition. In contrast a protection against the action of Mg2+ could be observed. Mixed bilayers of dimyristoyl phosphatidylserine/dimyristoyl phosphatidylcholine show phase separations at molar ratios above 1/1 (van Dijck, P.W.M., de Kruijff, B., Verkleij, A.J., van Deenen, L.L.M. and de Gier, J. (1978) Biochim. Biophys. Acta 512, 84--96). These phase spearations can be prevented by spectrin-actin. Ca2+-induced lateral phase separations in cocrystallizing phosphatidylserine/phosphatidylcholine mixtures, can be reduced by spectrin-actin. Formation of the Ca2+-phosphatidylserine salt, occurring in addition to lateral phase separation when mixtures contain more than 30 mol % phosphatidylserine, cannot be prevented by spectrin-actin.

Actins↗

Thermodynamics of phosphatidylcholine-cholesterol mixed model membranes in the liquid crystalline state studied by the orientational order parameter.

It is shown that good estimates of the activity of cholesterol in phosphatidylcholine-cholesterol mixed model membranes are obtained by examining the orientational order parameter S of cholestane spin probe (CSL) that is obtained from electron spin resonance by spectral simulation. By introducing thermodynamic stability conditions of liquid mixtures, the variation of activity (or S) as a function of cholesterol mole fraction is utilized to predict the concentration at which the phase separation occurs. These results for DMPC and cholesterol binary mixtures agree very well with those of Tempo-partitioning experiments. The comparison of activity coefficients and the phase boundary in DMPC/cholesterol mixtures with those of POPC/cholesterol mixtures suggests that acyl chain unsaturation leads to poorer mixing of cholesterol in phosphatidylcholine model membranes at higher temperatures (i.e., greater than 35 degrees C). In ternary solutions of DMPC, POPC, and cholesterol, it is found that cholesterol shows less deviation from ideality than in either of the two binary mixtures, and this implies that the phase separation occurs at higher cholesterol concentration than in either of the two binary mixtures. The present analysis suggests that there may not be a critical point in DMPC/cholesterol mixtures, even though phase separation does occur.

Cholesterol↗

Protein adsorption to poly(ether urethane ureas) modified with acrylate and methacrylate polymer and copolymer additives.

To understand better blood interactions with poly(ether urethane urea) (PEUU) materials, a radioimmunoassay and whole or diluted human plasma were used to characterize the presence of fibrinogen, immunoglobulin G, factor VIII/von Willebrand factor, Hageman factor (factor XII), and albumin on a PEUU formulation and on PEUU formulations modified with the amphiphilic additive Methacrol 2138F (co[diisopropylaminoethyl methacrylate (DIPAM)/decyl methacrylate] [3/1]), or with hydrophobic acrylate or methacrylate polymer or copolymer additives. The protein adsorption assay showed that PEUU films loaded or coated with Methacrol 2138F (Methacrol) or homopoly-DIPAM (h-DIPAM) adsorbed significantly lower amounts of the studied proteins than did either the base PEUU formulations or the PEUUs loaded with the more hydrophobic acrylate or methacrylate polymer additives. Experiments with Methacrol-loaded PEUUs, where the loading of Methacrol was varied from 0.25 wt% to 20.0 wt%, showed that the adsorption of each of the characterized proteins did not vary significantly throughout the Methacrol loading range, and that all Methacrol-loaded PEUU formulations adsorbed significantly lower amounts of the studied proteins than did the unloaded PEUU. Phase separation within the additive loaded PEUUs was characterized by scanning electron microscopy (SEM). The solubility parameters of the additives, as well as of the base PEUU, were calculated and used to interpret differences in phase separation of the additive modified PEUUs. The analysis showed that additives of lower solubility parameter phase-separated into fewer large microdroplets within the PEUU matrix. SEM analysis also showed that additive microdroplets were not present on the air side surface of loaded PEUUs. To explain the differences in protein adsorption to the air side of additive loaded PEUUs when compared to the base PEUU, it was assumed that the additives near this region of the solvent swollen PEUU matrix may have migrated to, at, or near the PEUU-air interface during film formation, creating an additive enriched PEUU surface region. Once at this surface region, it was suggested that dynamic surface reorientation in response to an aqueous medium ensured that the additives were able significantly to influence protein adsorption behavior only if they interacted with aqueous media more favorably than the PEUU.

Acrylates↗

Influence of glycolipid oligosaccharide and long-chain base composition on the thermotropic properties of dipalmitoylphosphatidylcholine large unilamellar vesicles containing gangliosides.

The thermotropic behavior of dipalmitoylphosphatidylcholine large unilamellar vesicles containing gangliosides has been studied by high-sensitivity heating and cooling differential scanning calorimetry. These studies have been directed to identify and evaluate the influence of both the ganglioside lipidic portion and oligosaccharide moiety on the physical properties of phospholipid bilayers containing gangliosides. The influence of the ganglioside lipidic portion has been evaluated by studying the behavior of vesicles containing different GD1a molecular species carrying homogeneous lipid moieties (C20 or C18 sphingosine or sphinganine and stearic acid). The influence of the ganglioside saccharide portion was evaluated by investigating the thermotropic behavior of vesicles containing different gangliosides (GM1, Fuc-GM1, GD1a, GT1b) carrying the same homogeneous long-chain base moiety (C20 sphingosine and stearic acid). These studies, in conjunction with previous studies using homogeneous lipidic portion ganglioside GM1 and phosphatidylcholines of various chain lengths [Masserini, M., & Freire, E. (1986) Biochemistry 25, 1043-1049], indicate that, for a given oligosaccharide composition, gangliosides exhibit lateral phase separation in an extent dependent upon the length and unsaturation difference between the ganglioside long-chain base and phosphatidylcholine acyl chains. For a given ganglioside lipidic composition the extent of phase separation is dependent upon the number of sugar units present in the glycolipid. The addition of Ca2+ induces or enhances phase separation in a manner dependent on the long-chain base and oligosaccharide composition. Cooling differential scanning calorimetry experiments showed that the ganglioside property to form aggregates within the membrane is independent of the initial physical state of the bilayer.(ABSTRACT TRUNCATED AT 250 WORDS)

1,2-Dipalmitoylphosphatidylcholine↗

Comparison of zirconia- and silica-based reversed stationary phases for separation of enkephalins.

In this study, the separation of biologically active peptides on two zirconia-based phases, polybutadiene (PBD)-ZrO2 and polystyrene (PS)-ZrO2, and a silica-based phase C18 was compared. Basic differences in interactions on both types of phases led to quite different selectivity. The retention characteristics were investigated in detail using a variety of organic modifiers, buffers, and temperatures. These parameters affected retention, separation efficiency, resolution and symmetry of peaks. Separation systems consisting of Discovery PBD-Zr column and mobile phase composed of a mixture of acetonitrile and phosphate buffer, pH 2.0 (45:55, v/v) at 70 degrees C and Discovery PS-Zr with acetonitrile and phosphate buffer, pH 3.5 in the same (v/v) ratio at 40 degrees C were suitable for a good resolution of enkephalin related peptides. Mobile phase composed of acetonitrile and phosphate buffer, pH 5.0 (22:78, v/v) was appropriate for separation of enkephalins on Supelcosil C18 stationary phase.

Buffers↗

Membrane composition can influence the rate of Al3+-mediated lipid oxidation: effect of galactolipids.

In the first part of the present study we investigated the effects of pre-natal and early postnatal exposure of mice to high levels of dietary Al3+ on myelin lipid composition and lipid oxidation. We found: (1) a significantly higher (104%; P<0.01) content of brain myelin galactolipids in the high-Al3+ group than in controls, and, (2) a significant correlation (r2=0.70; P<0.01) between the concentration of myelin galactolipids and TBARS (2-thiobarbituric acid-reactive substances) content, a parameter of lipid oxidation. Based on these results, we evaluated in an in vitro model (liposomes) whether galactolipids could affect the capacity of Al3+ to stimulate Fe2+-initiated lipid oxidation, and whether this effect could be due to the promotion of changes in membrane physical properties (membrane phase separation and rigidification). The presence of galactolipids (10-40 mol%) in the liposomes caused a concentration-dependent increase in the stimulatory effect of Al3+ on Fe2+-induced TBARS production, and on the ability of Al3+ to induce phase separation and membrane rigidification. The capacity of Al3+ (10-100 microM) to induce lateral phase separation in liposomes composed of phosphatidylcholine/phosphatidylserine/galactolipid (36:24:40, molar ratio) was correlated significantly (r2=0.99; P<0. 001) with the stimulatory action of Al3+ on Fe2+-induced TBARS production. We propose that the high content of galactolipids found in myelin from Al3+-intoxicated mice could favour Al3+-induced changes in membrane physical properties, with the subsequent acceleration of lipid oxidation rates.

Aluminum↗

Normal-phase HPLC separation of possible biosynthetic intermediates of pheophytin a and chlorophyll a'.

Normal-phase HPLC conditions have been developed for separating the C17(3) isoprenoid isomers, which are expected to be formed as biosynthetic intermediates of chlorophyll (Chl) a, Chl a' (C13(2)-epimer of Chl a), pheophytin (Pheo) a and protochlorophyll (PChl). The application of these conditions to pigment composition analysis of greening etiolated barley leaves allowed us to detect, for the first time, the C17(3) isomers of Chl a', a possible constituent of the primary electron donor of photosystem (PS) I, P700, and those of Pheo a, the primary electron acceptor of PS II, in the very early stage of greening. The C17(3) isomer distribution patterns were approximately the same between Chl a and Chl a', but significantly different between Pheo a and Chl a', probably reflecting the similarity and difference, respectively, in the biosynthetic pathways of these pigment pairs.

Carbohydrate Sequence↗

Glassy correlations and microstructures in randomly cross-linked homopolymer blends.

We consider a microscopic model of a polymer blend that is prone to phase separation. Permanent cross-links are introduced between randomly chosen pairs of monomers, drawn from the Deam-Edwards distribution. Thereby, not only density but also concentration fluctuations of the melt are quenched-in in the gel state, which emerge upon sufficient cross-linking. We derive a Landau expansion in terms of the order parameters for gelation and phase separation, and analyze it on the mean-field level, including Gaussian fluctuations. The mixed gel is characterized by thermal as well as time-persistent (glassy) concentration fluctuations. Whereas the former are independent of the preparation state, the latter reflect the concentration fluctuations at the instant of cross-linking, provided the mesh size is smaller than the correlation length of phase separation. The mixed gel becomes unstable to microphase separation upon lowering the temperature in the gel phase. Whereas the length scale of microphase separation is given by the mesh size, at least close to the transition, the emergent microstructure depends on the composition and compressibility of the melt. Hexagonal structures, as well as lamellas or random structures with a unique wavelength, can be energetically favorable.

Journal Article↗

Partitioning of dual-lipidated peptides into membrane microdomains: lipid sorting vs peptide aggregation.

The lateral membrane organization and phase behavior of the lipid mixture DMPC(di-C(14))/DSPC(di-C(18))/cholesterol (0-33 mol %) with and without an incorporated fluorescence-labeled palmitoyl/farnesyl dual-lipidated peptide, BODIPY-Gly-Cys(Pal)-Met-Gly-Leu-Pro-Cys(Far)-OMe, which represents a membrane recognition model system for Ras proteins, was studied by two-photon excitation fluorescence microscopy. Measurements were performed on giant unilamellar vesicles (GUVs) over a large temperature range, ranging from 30 to 80 degrees C to cover different lipid phase states (all-gel, fluid/gel, liquid-ordered, all-fluid). At temperatures where the fluid-gel coexistence region of the pure binary phospholipid system occurs, large-scale concentration fluctuations appear. Incorporation of cholesterol levels up to 33 mol % leads to a significant increase of conformational order in the membrane system and a reduction of large domain structures. Adding the peptide leads to dramatic changes in the lateral organization of the membrane. With cholesterol present, a phase separation is induced by a lipid sorting mechanism owing to the high affinity of the lipidated peptide to a fluid, DMPC-rich environment. This phase separation leads to the formation of peptide-containing domains with high fluorescence intensity that become progressively smaller with decreasing temperature. As a result, the local concentration of the peptide increases steadily within the confines of the shrinking domains. At the lowest temperatures, where the acyl-chain order parameter of the membrane has already drastically increased and the membrane achieves a liquid-ordered character, an efficient lipid sorting mechanism is no longer supported and aggregation of the peptide into small clusters prevails. We can conclude that palmitoyl/farnesyl dual-lipidated peptides do not associate with liquid-ordered or gel-like domains in phase-separated bilayer membranes. In particular, the study shows the interesting ability of the peptide to induce formation of fluid microdomains at physiologically relevant cholesterol concentrations, and this effect very much depends on the concentration of fluid vs ordered lipid molecules.

Cholesterol↗

Purification of protein and recycling of polymers in a new aqueous two-phase system using two thermoseparating polymers.

In this study we present a new aqueous two-phase system where both polymers are thermoseparating. In this system it is possible to recycle both polymers by temperature induced phase separation, which is an improvement of the aqueous two-phase system previously reported where one of the polymers was thermoseparating and the other polymer was dextran or a starch derivative. The polymers used in this work are EO50PO50, a random copolymer of 50% ethylene oxide (EO) and 50% propylene oxide (PO), and a hydrophobically modified random copolymer of EO and PO with aliphatic C14H29-groups coupled to each end of the polymer (HM-EOPO). In water solution both polymers will phase separate above a critical temperature (cloud point for EO50PO50 50 degrees C, HM-EOPO, 14 degrees C) and this will for both polymers lead to formation of an upper water phase and a lower polymer enriched phase. When EO50PO50 and HM-EOPO are mixed in water, the solution will separate in two phases above a certain concentration i.e. an aqueous two-phase system is formed analogous to poly(ethylene glycol) (PEG)/dextran system. The partitioning of three proteins, bovine serum albumin, lysozyme and apolipoprotein A-1, has been studied in the EO50PO50/HM-EOPO system and how the partitioning is affected by salt additions. Protein partitioning is affected by salts in similar way as in traditional PEG/dextran system. Recombinant apolipoprotein A-1 has been purified from a cell free E. coli fermentation solution. Protein concentrations of 20 and 63 mg/ml were used, and the target protein could be concentrated in the HM-EOPO phase with purification factors of 6.6 and 7.3 giving the yields 66 and 45%, respectively. Recycling of both copolymers by thermoseparation was investigated. In protein free systems 73 and 97.5% of the EO50PO50 and HM-EOPO polymer could be recycled respectively. Both polymers were recycled after aqueous two-phase extraction of apolipoprotein A-1 from a cell free E. coli fermentation solution. Apolipoprotein A-1 was extracted to the HM-EOPO phase with contaminating proteins in the EO50PO50 phase. The yield (78%) and purification factor (5.5) of apolipoprotein A-1 was constant during three polymer recyclings. This new phase system based on two thermoseparating polymers is of great interest in large scale extractions where polymer recycling is of increasing importance.

Apolipoprotein A-I↗