SEARCH · PubMed Health

Results for “Flocculation”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72Linked to original sources

PubMed2002

Surface chemical studies on sphalerite and galena using extracellular polysaccharides isolated from Bacillus polymyxa.

Adsorption, electrokinetic, microflotation, and flocculation studies have been carried out on sphalerite and galena minerals using extracellular polysaccharides (ECP) isolated from Bacillus polymyxa. The adsorption density of ECP onto galena is found to be higher than that onto sphalerite. The adsorption of ECP onto sphalerite is found to increase from pH 3 to about pH 7, where a maximum is attained, and thereafter continuously decreases. With respect to galena, the adsorption density of ECP steadily increases with increased pH. The addition of ECP correspondingly reduces the negative electrophoretic mobilities of sphalerite and galena in absolute magnitude without shifting their isoelectric points. However, the magnitude of the reduction in the electrophoretic mobility values is found to be greater for galena compared to that for sphalerite. Microflotation tests show that galena is depressed while sphalerite is floated using ECP in the entire pH range investigated. Selective flotation tests on a synthetic mixture of galena and sphalerite corroborate that sphalerite could be floated from galena at pH 9-9.5 using ECP as a depressant for galena. Flocculation tests reveal that in the pH range 9-11, sphalerite is dispersed and galena is flocculated in the presence of ECP. Dissolution tests indicate release of the lattice metal ions from galena and sphalerite, while co-precipitation tests confirm chemical interaction between lead or zinc ions and ECP. Fourier transform infrared spectroscopic studies provide evidence in support of hydrogen bonding and chemical interaction for the adsorption of ECP onto galena/sphalerite surfaces.

Bacillus↗

PubMed1982

Ultrastructure of pinealocytes of the kangaroo rat (Dipodomys ordi).

The ultrastructure of the pinealocytes of the wild-captured ord kangaroo rat (Dipodomys ordi) was examined. A homogeneous population of pinealocytes was present in the pineal gland of the kangaroo rat. The Golgi apparatus, granular endoplasmic reticulum, mitochondria, lysosomes, dense-core vesicles, vacuoles containing a flocculent material and lipid droplets were consistent components of the pinealocyte cytoplasm, whereas infrequently-observed organelles included centrioles, multivesicular bodies, subsurface cisternae, "synaptic" ribbons and cilia. The number of dense-core vesicles was relatively high and dense-core vesicles and vacuoles containing a flocculent material were present in the same cell. Although it has been recently suggested that two different secretory processes, i.e., neurosecretory-like (Golgi apparatus - dense-core vesicles) and ependymal-like (granular endoplasmic reticulum - vacuoles containing a flocculent material) may be involved in different regulatory mechanisms in the pinealocytes, the definitive answer to this is still far from clear. Therefore, the pineal gland of the kangaroo rat appears to be a good model for the study of the potential relationship between these two secretory processes, especially in respect to seasonal changes.

Animals↗

PubMed1986

A histochemical study of changes in mitochondrial enzyme activities of rat liver after ischemia in vitro.

Changes in the activity of three mitochondrial enzymes in rat liver after in vitro ischemia have been determined by enzyme histochemical methods. The changes were correlated with the appearance in the electron microscope of flocculent densities in the mitochondria indicative of irreversible cell injury. The flocculent densities were observed in rat liver after about 2 h of ischemia in vitro at 37 degrees C. At the same time the activity of glutamate dehydrogenase, localized in the mitochondrial matrix, started to decrease. However, the activities of succinate dehydrogenase localized in the inner membrane of mitochondria, as well as monoamine oxidase of the mitochondrial outer membrane did not change at that stage. It is concluded from the results of this study and those of others that flocculent densities are formed by denaturation of proteins of the mitochondrial matrix in which glutamate dehydrogenase takes part. It should be considered more as a sign than as the cause of cell death.

Animals↗

PubMed2003

Bacterial diversity in shallow oligotrophic marine benthos and overlying waters: effects of virus infection, containment, and nutrient enrichment.

Little is known of the factors shaping sediment bacterial communities, despite their high abundance and reports of high diversity. Two factors hypothesized to shape bacterial communities in the water column are nutrient (resource) availability and virus infection. The role these factors play in benthic bacterial diversity was assessed in oligotrophic carbonate-based sediments of Florida Bay (USA). Sediment-water mesocosm enclosures were made from 1-m diameter clear polycarbonate cylinders which were pushed into sediments to approximately 201 cm sediment depth enclosing approximately 80 L of water. Mesocosms were amended each day for 14 d with 10 microM NH4+ and 1 microM PO4(3-). In a second experiment, viruses from a benthic flocculent layer were concentrated and added back to flocculent layer samples which were collected near the mesocosm enclosures. Photosynthesis by microalgae in virus-amended incubations was monitored by pulse-amplitude modulated (PAM) fluorescence. In both experiments, bacterial diversity was estimated using automated rRNA intergenic spacer analysis (ARISA), a high-resolution fingerprinting approach. Initial sediment bacterial operational taxonomic unit (OTU) richness (236 +/- 3) was higher than in the water column (148 +/- 9), where an OTU was detectable when its amplified DNA represented >0.09% of the total amplified DNA. Effects on bacterial diversity and operational taxonomic unit (OTU) richness in nutrient-amended mesocosms may have been masked by the effects of containment, which stimulated OTU richness in the water column, but depressed OTU richness and diversity in sediments. Nutrient addition significantly elevated virus abundance and the ratio of viruses to bacteria (p < 0.05 for both) in the sediments, concomitant with elevated bacterial diversity. However, water column bacterial diversity (in unamended controls) was not affected by nutrient amendments, which may be due to rapid nutrient uptake by sediment organisms or adsorption of P to carbonate sediments. Addition of live viruses to benthic flocculent layer samples increased bacterial OTU diversity and richness compared with heat-killed controls; however, cluster analyses showed that the community structure in the virus-amended mesocosms varied greatly between replicates. Despite the strong effects upon eubacterial communities, photosynthesis of co-occurring protists and cyanobacteria was not significantly altered by the presence of virus concentrates. This study supports the hypothesis that nutrient availability plays a key role in shaping sediment bacterial communities, and also that viruses may regulate the abundance of the dominant competitors and allow less dominant organisms to maintain or increase their abundance in a community due to decreased competition for resources.

Bacteria↗

PubMed2003

The aggregation behaviour of protein-coated particles: a light scattering study.

The different mechanisms involved in the aggregation of spherical latex particles coated with bovine serum albumin (BSA) have been studied using static and dynamic light scattering. These techniques assess the fractal dimension of the aggregates and their mean hydrodynamic radius. Particles with different degrees of surface coverage have been prepared. The net charge of the covered particles has been modified by varying the pH of the aqueous phase. The aggregation rate was measured and used to determine the importance of the different aggregation mechanisms that are responsible for these types of flocculation processes. At low and intermediate degrees of surface coverage, bridging flocculation is the principal aggregation mechanism irrespective of the electrical state of the protein-particle complexes. At high degree of surface coverage, however, weak flocculation is important only when the BSA molecules are at their isoelectric point.

Animals↗

PubMed2002

Recovery of Bacillus sphaericus 2362 spores from growth medium by flocculation/sedimentation.

Bacillus sphaericus 2362 spore sedimentation was evaluated through batch settling experiments, using tannin as the flocculating agent. The flocculation was demonstrated to be efficient up to the tannin concentration of 150 ppm. The floc diameter averaged 208 micro m, and its density was found to be 1.09 g/mL. The sedimentation process using tannin as a flocculating agent is promising, and a spore concentrate was obtained without loss of biological activity, presenting a LC(50) equal to 0.22 ppm. The result indicates that the larvicide activity is appropriate for controlling populations of Culex quinquefasciatus.

Journal Article↗

PubMed2005

Calcium changes and the response to methyl jasmonate in rice lodicules during anthesis.

Potassium pyroantimonate precipitation was used to locate loosely bound calcium in rice (Oryza sativa L.) lodicules before and after anthesis, and flowering of panicles was accelerated by treatment with methyl jasmonate. From 1 day to 4 h before anthesis, the number of calcium precipitates in the cell walls and vacuole membranes decreased gradually, whereas they increased remarkably in the cytoplasm and nucleolus. At the beginning of anthesis, the number of calcium granules in lodicules reduced sharply, but there was a large accumulation of flocculent precipitates in the vacuoles. After anthesis, the flocculent precipitates decreased in number until they disappeared, whereas the granular precipitates started to accumulate once again. The rice florets treated with 2 mM methyl jasmonate were induced to open within 10-30 min and they then closed 0.5-1 h later. The nucleolus, cytoplasm, and vacuole membrane of the lodicule cells contained many calcium granules during flowering, although the cell walls lacked calcium. At 1 h after treatment, the number of calcium granules had decreased, while flocculent precipitates were regularly observed in the nondegenerated cells. At 6 h after treatment, calcium grains started to reappear in the cell walls. These changes in calcium precipitates before and after anthesis indicate that the opening and closing of florets correlates with the calcium level in lodicule cells. In addition, excised panicles, with florets judged to be nearing anthesis, were soaked in 2-200 mM EGTA solution for 2 min after treatment with 2 mM methyl jasmonate. The results indicate that EGTA had an antagonistic effect on the methyl jasmonate-induced floret opening in rice.

Acetates↗

PubMed1996

Pathogenic micro-organisms in slaughterhouse sludge--a survey.

During slaughtering of animals and subsequent meat processing the process water used becomes polluted with organic matter of animal origin (i.e. protein and fat). This organic sludge is, in principle, a product suitable for animal feeding. To investigate the microbiological contamination level of sludge, raw sludge was collected at pig (n = 8) and poultry (n = 5) slaughterhouses. Both flocculated and aerobically activated sludge was monitored. Slaughterhouse sludge was heavily contaminated with Enterobacteriaceae (6.3-10.0 in log10 N/gram dry matter) and enterococci (4.6-7.9). Clostridia were present in sludge at a level of 3.1-5.8 (in log10 N/g DM). Salmonella was present in the sludge from all slaughterhouses examined. Yersinia enterocolitica serotypes O:3 and O:9 were found in sludge from seven out of thirteen slaughterhouses. The prevalence of Campylobacter jejuni/coli was higher in flocculated poultry sludge than in both flocculated pig sludge and aerobically activated pig sludge. Obviously, decontamination of the sludge is mandatory when it is to be applied as a feed constituent, to prevent bacterial cycles from occurring in livestock, as well as the spread of human pathogenic zoonoses like campylobacter, salmonella and yersinia, to minimize loss of protein quality by the microbial breakdown of amino acids and the formation of possible toxic metabolites in sludge during storage.

Abattoirs↗

PubMed1991

Investigation of ionic stability criteria for ion-permeable charged membranes.

The flocculation criteria in the DLVO theory of colloid stability are applied to ion-permeable membranes containing ionizable fixed groups. These groups are not restricted to the membrane surface but are uniformly distributed throughout a thick surface layer. The flocculation concentrations for such membranes are calculated by using a numerical method to solve the nonlinear Poisson-Boltzmann equation. Results are compared with calculations previously carried out for more restrictive models of biological membranes. The flocculation concentrations are shown to depend on the density of ionizable groups, the dissociation constant of these groups, and the pH of the bulk solution.

Journal Article↗

PubMed2004

Surface forces in model oil-in-water emulsions stabilized by proteins.

We have employed two complementary techniques, namely, the magnetic chaining technique (MCT) and a variant of the Mysels cell to obtain data concerning the repulsive interaction profiles between protein layers formed at liquid-liquid interfaces. For BSA-stabilized systems, a long-ranged repulsion is operative. It is not of an electrostatic origin, but originates most probably from the formation of multiple protein layers at the interface. The interactions between beta-casein layers formed at the water/oil interface are governed by electrostatic repulsion. Due to the relatively large final thickness of approximately 20 nm, the van der Waals contribution to the total disjoining pressure is inferior. The oscillatory component is also negligible for the studied protein concentration of 0.1 wt.%. For both proteins, the extracted information describes the situation where the protein-covered surfaces are approached/manipulated in a quasi-static manner. We observe a very good agreement between the data obtained from MCT and Mysels cell. The comparison of our results with literature data from surface force apparatus (SFA) experiments reveals a substantial difference in the force laws existing between protein-stabilized liquid droplets and mica surfaces covered by proteins. We explain this discrepancy in terms of the different protein absorption on solid and liquid interfaces. We also measured the threshold force necessary to induce irreversible flocculation in beta-casein and beta-lactoglobulin (BLG) stabilized emulsions. Under similar conditions, the threshold flocculation force is higher for beta-casein than for BLG stabilized droplets. The flocs formed from BLG covered droplets are tight and remain without visible change for at least 48 h. We speculate that the flocculation is due to formation of protein aggregates between the approaching droplets.

Adsorption↗

PubMed2006

Surfactive water-soluble copolymers for the preparation of controlled surface nanoparticles by double emulsion/solvent evaporation.

We have already shown that polylactide (PLA) nanoparticles covered with a hydrophilic polymeric layer can be prepared by simple emulsion/solvent evaporation by using amphiphilic copolymers as surfactants during the procedure. The external layer is then constituted by the hydrophilic part of the macromolecular surfactant. This kind of nanospheres is useful for the encapsulation of lipohilic molecules. The use of amphiphilic copolymers as surfactants in the preparation of PLA nanospheres with controlled surface properties, was then applied to the double emulsion/solvent evaporation procedure. The aim was to allow the encapsulation of water-soluble bioactive molecules in PLA particles with controlled surface properties. In this paper, we describe the results obtained with three different water-soluble monomethoxypolyethylene oxide (MPEO)-b-PLA diblock copolymers used as surfactants in the preparation of nanoparticles by double emulsion/solvent evaporation. After organic solvent evaporation, the obtained nanospheres were proved to be really covered by a MPEO layer whose characteristics were determined. It was firstly shown that the MPEO-covered particles did not flocculate at 25 degrees C, even in 4 M NaCl while suspensions of bare nanospheres were destabilized for a NaCl concentration as low as 0.04 M. On the other hand, the suspensions of MPEO-covered nanoparticles in 0.3 M Na2SO4 were found to be very sensitive to temperature as they flocculated at a temperature lying between 45 and 55 degrees C depending on the MPEO-b-PLA composition. This property was attributed to the fact that MPEO is a polymer with a low critical solution temperature. The concentration of MPEO at the nanoparticle surface was then calculated for the three kinds of particles, from the initial flocculation temperature, and was found to be comparable to the value determined directly.

Biocompatible Materials↗

PubMed2005

A rheological investigation of the self-assembly and adsorption behavior of a surfactant salt.

The properties of a surfactant salt obtained by neutralizing oleic acid with an ethoxylated stearylamine were determined in blends of water and propylene glycol. The adsorption of this surfactant salt onto the surface of a commercial TiO(2) dispersed in blends of water and propylene glycol was studied using a rheometer. At low propylene glycol content the dispersions exhibited Newtonian behavior, but became shear-thinning fluids with high viscosity at propylene glycol contents above a critical concentration. The observed behavior is consistent with a model involving a surfactant bilayer below the critical point, moving to a monolayer above the critical point. The high viscosity above the critical point is generated by reversible flocculation via hydrophobic forces. The viscosity of the dispersion flocculated by the hydrophobic forces was found to be much higher than that caused by flocculation via van der Waals forces in the absence of surfactant. Changing both the total concentration of the surfactant in the dispersion and the dispersion temperature resulted in a reversible transition between the bilayer and the monolayer. Although the surfactant was always above its critical micelle concentration (CMC) the amount on the particle surface varied appreciably with both propylene glycol and surfactant concentration.

Adsorption↗

PubMed2006

Kinetics of polyelectrolyte adsorption onto polystyrene latex particle studied using electrophoresis: effects of molecular weight and ionic strength.

The kinetics of the adsorption of a cationic polymer flocculant onto negatively charged polystyrene latex (PSL) particles were measured by means of electrophoresis as a function of the molecular weight of the polyelectrolyte and the ionic strength of the solution. In the experiment, the dispersion of bare PSL particles was mixed with a polyelectrolyte solution by means of end-over-end rotation in which the mixing intensity was evaluated in terms of the collision frequency between the colloidal particles. The rate of electrophoretic mobility of a PSL particle, which remained as a singlet, was measured against the mixing steps, which was equivalent to the time elapsed after the onset of flocculation. The shape of the kinetic curves is typical: a linear increase for a short period followed by a plateau, implying the saturation of the colloidal surface by the adsorbed polyelectrolyte. In the case of low ionic strength, the plateau value was dependent on the molecular weight of the polyelectrolyte. That is, a lower plateau value was detected when the molecular weight of the polyelectrolyte was smaller and its concentration was lower. However, the amount of adsorption was kinetically controlled only for the case of higher molecular weight. In the case of high ionic strength, the plateau value of electrophoresis was constant, regardless of the polyelectrolyte concentration and molecular weight. These data will ultimately be useful in further analysis of the flocculation behavior of colloidal particles with a polyelectrolyte.

Journal Article↗

PubMed2006

Contribution of static light scattering to the textural characterization of large aggregates.

The industrial processes of water clarification often imply flocs of millimeter length. The principal motivation of this work relates to the characterization of these large flocs with laser diffractometry, for which the authors propose particular experimental approaches. In addition, a reformulation of the various properties of the flocs accessible by laser diffractometry is presented, in particular for the determination of the size, density, porosity, volume fraction, and fractal dimension. By way of illustration, these experimental and theoretical developments are applied to the characterization of flocs obtained by flocculation of a commercial kaolin. The size, fractal dimension, and density of kaolin floc were examined under various flocculant concentrations. Measurements reveal important variations of the granulometric and textural properties of large flocs in response to flocculation, opening ways of optimization for the associated industrial processes.

Journal Article↗

PubMed2006

Use of zeolitised coal fly ash for landfill leachate treatment: a pilot plant study.

Treatment of municipal solid waste (MSW) landfill leachate generally results in low percentages of nutrient removal due to the high concentration and accumulation of refractory compounds. For this reason, individual physical, chemical and biological processes have been used for the treatment of raw landfill leachate and sometimes for the mixture of domestic wastewater and landfill leachate. In this work, the possibility of treating landfill leachate was tested in a bench-scale pilot plant by a two-step method combining adsorption and coagulation-flocculation. Zeolite synthesized from coal fly ash, a by-product of coal-fired power stations, was used in this study both as a decantation aid reagent and as an adsorbent of COD and NH4-N. The coagulation-flocculation step was performed by the use of aluminium sulphate and a polyelectrolyte (ACTIPOL A-401). The leachate was collected directly from a storage unit of the organic fraction of MSW, before it was composted. For this reason the raw leachate was diluted before treatment. The sludge was recirculated to enhance the removal efficiency of nutrients as well as to optimize flocculant saving and to decrease sludge production. The results showed that it is possible to remove 43%, 53% and 82% of COD, NH4-N, and suspended solids, respectively. Therefore, this method may be an alternative for ammonium removal, as well as a suitable pre- or post-treatment step, in combination with other processes in order to meet regulatory limits.

Alum Compounds↗

PubMed2005

Energy demand in sludge dewatering.

This work investigates the energy required to dewater a suspension, i.e., activated sludge dewatered by centrifugation or consolidation. Total energy input to the suspension from the dewatering device, bond strength between adjacent water and solid surface, and intra-cake friction loss were evaluated for original and flocculated sludges. In centrifugal dewatering, most energy input during the initial stage was consumed by overcoming process irreversibility other than intra-cake friction, and, thereby, had a low energy efficiency. To increase centrifuge speed or to flocculate the sludge at optimal flocculant dosage would yield a high-energy input. In the consolidation test, most energy input at the initial stage was consumed in breaking down the bond strength until the moisture content reduced to less than the critical content. During subsequent dewatering stages, friction loss became the dominant source of energy loss. Dewatering sludge with high-energy efficiency is beneficial to optimally operate a dewatering process.

Centrifugation↗

PubMed2002

Sterically and electrosterically stabilized emulsion polymerization. Kinetics and preparation.

The principal subject discussed in the current paper is the radical polymerization in the aqueous emulsions of unsaturated monomers (styrene, alkyl (meth)acrylates, etc.) stabilized by non-ionic and ionic/non-ionic emulsifiers. The sterically and electrosterically stabilized emulsion polymerization is a classical method which allows to prepare polymer lattices with large particles and a narrow particle size distribution. In spite of the similarities between electrostatically and sterically stabilized emulsion polymerizations, there are large differences in the polymerization rate, particle size and nucleation mode due to varying solubility of emulsifiers in oil and water phases, micelle sizes and thickness of the interfacial layer at the particle surface. The well-known Smith-Ewart theory mostly applicable for ionic emulsifier, predicts that the number of particles nucleated is proportional to the concentration of emulsifier up to 0.6. The thin interfacial layer at the particle surface, the large surface area of relatively small polymer particles and high stability of small particles lead to rapid polymerization. In the sterically stabilized emulsion polymerization the reaction order is significantly above 0.6. This was ascribed to limited flocculation of polymer particles at low concentration of emulsifier, due to preferential location of emulsifier in the monomer phase. Polymerization in the large particles deviates from the zero-one approach but the pseudo-bulk kinetics can be operative. The thick interfacial layer can act as a barrier for entering radicals due to which the radical entry efficiency and also the rate of polymerization are depressed. The high oil-solubility of non-ionic emulsifier decreases the initial micellar amount of emulsifier available for particle nucleation, which induces non-stationary state polymerization. The continuous release of emulsifier from the monomer phase and dismantling of the non-micellar aggregates maintained a high level of free emulsifier for additional nucleation. In the mixed ionic/non-ionic emulsifiers, the released non-ionic emulsifier can displace the ionic emulsifier at the particle surface, which then takes part in additional nucleation. The non-stationary state polymerization can be induced by the addition of a small amount of ionic emulsifier or the incorporation of ionic groups onto the particle surface. Considering the ionic sites as no-adsorption sites, the equilibrium adsorption layer can be thought of as consisting of a uniform coverage with holes. The de-organization of the interfacial layer can be increased by interparticle interaction via extended PEO chains--a bridging flocculation mechanism. The low overall activation energy for the sterically stabilized emulsion polymerization resulted from a decreased barrier for entering radicals at high temperature and increased particle flocculation.

Emulsions↗

PubMed2002

Characterization of crude oils by inverse gas chromatography.

It was shown that the flocculation onset of asphaltenes in crude oils could be predicted on the basis of the inverse gas chromatography characterization of the crude oil properties. Hildebrand's solubility parameters of four crude oils were calculated from inverse chromatography data and compared with values obtained from the onset of asphaltene flocculation measurements. A good agreement was observed with three crude oils of different origin. A relation between Hildebrand's solubility parameter and linear solvation energy relationship descriptors was established and it was demonstrated that the solubility parameter of a crude oil is determined mainly with dispersion interactions and the hydrogen bond basicity. A large basicity lowers the oil solubility parameter, and increases its stability in respect to flocculation.

Chromatography, Gas↗