SEARCH · PubMed Health
Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A new procedure for the preparation of a core-shell-structured BaTiO(3) precursor (core=TiO(2); shell=BaCO(3)) will be described. The structure of this precursor is characterized by electron microscopy (environmental scanning electron microscopy; energy disperse X-ray spectroscopy), whereas the development of phases during thermal treatment is followed by X-ray powder diffraction.
A better repeatability and accuracy in the quantitative determination of trace elements in mussel shells or carbonate-based materials by LA-ICP-MS was achieved by using a series of multielement calibration standards prepared by co-precipitation of twelve elements into a CaCO3 matrix in order to improve the homogeneity of the resulting powder samples. Pressed powder discs of good mechanical stability could be obtained at a pressure of 50 MPa, without the addition of a binder. An UV laser (modified Nd:YAG, 266 nm) was used in the Q-switched mode at a repetition rate of 10 Hz and an energy level of 3.5 mJ. Correlation coefficients (R) for the linear calibration graphs (concentration range: 1.5-400 microg/g) for Cr, Mn, Co, Cu, Zn, As, Cd, Sn, Ba, and Pb are generally better than 0.997. The detection limits for all elements investigated are in the sub-microg/g range. Incorporation of elements into the matrix by co-precipitation has shown as a superior method for producing calibration standards than the simple mixture of the analytes (in carbonate or oxide form) with the matrix (CaCO3) or addition of standard solutions to a carbonate powder base. Two examples of the quantitative determination of toxic elements in mussel shells will be presented.
Individual variability in behavioural responses to stressors such as novelty and drugs of abuse is a well-known phenomenon in both animals and man. These individual differences are largely associated with differences in dopamine transmission in mesolimbic areas such as the nucleus accumbens. Apomorphine-susceptible (APO-SUS) rats and apomorphine-unsusceptible (APO-UNSUS) rats serve as a valid animal model for individual differences and these two types of rat differ in a number of behavioural, physiological, endocrinological and pharmacological parameters. In order to study the differences in the catecholaminergic network in the nucleus accumbens, possibly underlying at least some of the differences between the two types of rat, we quantified the extent of the tyrosine-hydroxylase immunoreactive (TH-IR) network and the number of TH-IR varicosities in subareas of the nucleus accumbens core and shell in naive rats. This study shows that the nucleus accumbens of APO-SUS rats has a more extensive fibre network and more varicosities than the nucleus accumbens of APO-UNSUS rats, and that the subarea of the shell contains more varicosities than the subarea of the core. These data provide a basis for further studying the structural and neurochemical properties of the nucleus accumbens contributing to individual differences in response to stressors such as novelty and drugs of abuse.
Thimerosal (o-Ethylmercurithio)benzoic acid, TMS), a membrane-impermeable, sulfhydryl-oxidizing agent, has been described to increase the K+ current IKs in KCNE1-injected Xenopus laevis oocytes. Since there are no cysteine residues in the extracellular domain of KCNE1, it has been proposed that TMS interacts with its partner protein KCNQ1. The aim of this study was therefore to investigate the interaction of TMS with KCNQ1 and the respective K+current IK. In CHO cells stably transfected with KCNQ1/KCNE1, TMS increased IKs, whereas in CHO cells expressing KCNQ1 alone, TMS initially decreased IK. TMS also affected the cytosolic pH (pHi) and the cytosolic Ca2+ activity ([Ca2+]i) in these cells. TMS slowly decreased pHi. With a short delay, TMS increased [Ca2+]i by store depletion and capacitative influx. The time course of the effects of TMS on pHi and [Ca2+]i did not correlate with the effect of TMS on IK. We therefore anticipated a different mode of action by TMS and investigated the influence of TMS on cysteine residues of KCNQ1. For this purpose, KCNQ1wt and two mutants lacking a cysteine residue in the S6 or the S3 segment (KCNQ1C331A and KCNQ1C214A, respectively) were expressed in Xenopus laevis oocytes. A sustained current decrease was observed in KCNQ1wt and KCNQ1C331A, but not in KCNQ1C214A-injected oocytes. The analysis of tail currents, I/V curves and activation kinetics revealed a complex effect of TMS on the gating of KCNQ1wt and KCNQ1C331A. In another series we investigated the effect of TMS on IKs. TMS increased IKs of KCNQ1C214A/KCNE1-injected oocytes significantly less than IKs in KCNQ1wt/KCNE1- or KCNQ1C331A/KCNE1-injected cells. These results suggest that thimerosal interacts with the cysteine residue C214 in the S3 segment of KCNQ1, leading to a change of its gating properties. Our results support the idea that not only the inner shell, but also the outer shell of the channel is important for the gating behavior of voltage dependent K+ channels.
The production of inexpensive chitinolytic enzymes is an element in the utilization of shellfish processing wastes. In this study, shrimp and crab shell powder prepared by treating shrimp and crab processing wastes with boiling and crushing was used as a substrate for the isolation of an antifungal chitinase-producing microorganism. Bacillus cereus YQ 308, a strain isolated from the soil samples, excreted one chitinase when cultured in a medium containing 2% (wt/vol) shrimp and crab shell powder as major carbon source. The chitinase, purified by sequential chromatography, had an Mr of 48 kDa and pI of 5.2. The purified chitinase (2 mg/ml) inhibited the hyphal extension of the fungi Fusarium oxysporum and Pythium ultimum.
Grass leaves are natural examples of shell structures because they are thin and display a double curvature. An important mechanical property of shells is that changes in longitudinal and transverse curvatures are not independent. The basis of this mechanical coupling is presented using simple diagrams. The relevance of the structural constraints for the processes of hydronastic rolling and developmental unrolling in grass leaves is then reviewed. I show that mechanical constraints can explain a large part of the genetic and developmental variability of hydronastic rolling in grasses, without reference to specific anatomic features such as bulliform cells. Mechanical analysis of a rolled maize mutant also revealed that developmental unrolling is not limited to a pure transverse expansion of hinge cells and involves both longitudinal and transverse dimensional changes in the upper epidermis. Interest in using mechanical models as a tool to reveal structural interactions at the tissue and organ level is discussed, and the importance of Paul Green's biophysical approach to the study of plant morphogenesis is emphasized.
Rigid-shelled eggs of the broad-shelled river turtle Chelodina expansa were incubated at 28 degrees C in wet (-100 kPa), intermediate (-350 kPa) and dry (-750 kPa) conditions. Incubation period was influenced by clutch of origin, but was independent of incubation water potential. Rates of water gained from the environment and pre-pipping egg mass were influenced by incubation water potential -- eggs incubating at higher (less negative) water potentials absorbing more water from their environment. Hatchlings from wet conditions had greater mass but a smaller amount of residual yolk than hatchlings from dry conditions and it is suggested that the amount of yolk converted to tissue is influenced by the amount of water absorbed by the egg during incubation. Water content of yolk-free hatchlings from the -100-kPa treatment was greater than those from the -350-kPa and -750-kPa treatments, but the water content of residual yolks was similar across all hydric conditions.
The stability of turnip yellow mosaic virus (TYMV) was investigated under pressure, using solution neutron small angle scattering. Dissociation products were characterized by analytical ultracentrifugation and electron microscopy. At pH 6.0, TYMV remained unaffected by pressure, up to 260 Megapascals (MPa), the highest pressure reached in these experiments. At pH 8.0, TYMV remained unaffected by pressure up to 160 MPa, but decapsidated irreversibly above 200 MPa, giving rise to more and more empty shells upon increasing pressure. The organization of these empty shells was similar to that of the capsid of native virions, apart from the presence of a hole corresponding to the loss of a group of 5-8 coat protein subunits, through which the RNA may have escaped. At variance with other small isometric viruses, the capsid of TYMV never dissociated under pressure into subunits or small aggregates of subunits. This exceptional behavior of TYMV is probably due to the importance of van der Waals contacts and hydrogen bonds in the stability of its capsid.
Estrogen deficiency causes reduction of bone mass and abnormal bone microarchitecture, consequently reducing bone strength. Human parathyroid hormone (hPTH) (1-34) increases bone mass and strength. To clarify the factors that determine the recovery of bone strength in the lumbar vertebrae of ovariectomized rats by intermittent hPTH administration, we analyzed the relationship between skeletal measurements and bone strength. Human PTH (1-34) administration resulted in recovery of cortical bone mineral content (BMC) and cortical bone area to sham the levels, but in resulted in a less pronounced recovery of trabecular BMC and no increase in the total cross-sectional area of the vertebral body. Of the three-dimensional (3D) trabecular bone parameters, hPTH (1-34) increased trabecular thickness (Tb.Th). The cortical shell area of L4, determined by histomorphometry, was also increased. In hPTH-treated rats, the only determinant of the compressive load of L5 was the cortical shell BMC, in the early recovery period (days 42-84). Our data suggest that increased cortical bone mass contributes more than trabecular bone mass and structure to the recovery of bone strength in response to hPTH therapy in the rat lumbar vertebral body after ovariectomy.
Soluble protein (MPSP, myostracal prism soluble protein) obtained from myostracum in oyster shell (Crassostrea gigas) was characterized using biochemical and molecular biological techniques. From an analysis of secondary protein structure, it was shown that beta-structure was predominant in MPSP. And via in vitro assays, the relation of MPSP to biomineral phase and morphology was studied. SDS-PAGE revealed one major protein band of 20 kDa. An amino acid sequence of 160 amino acids was deduced for myostracum by characterization of the complementary DNA encoding the protein. The deduced protein was composed of a high proportion of Gly and Asp, typifying a calcium-binding protein for shell formation, and a relatively high proportion of Val, Ala and Ile, typifying an adhesive protein. In contrast to prevailing expectations, (Gly-Asp)n-type sequence motifs exist in MPSP, demanding a revision of previous theories of protein-mineral interactions. The cDNA sequence of myostracum is elucidated for the first time.
A project was undertaken to evaluate the utility of the penetration test in the Australian Standard devoted to the testing of lightweight helmets for bicycle riders. The project revealed aspects of the protective performance of conventional hard shell helmets and recently developed helmets manufactured entirely from expanded polystyrene foam. Hard shell helmets were found to provide good performance in a range of loading conditions applied to them during testing. In contrast, foam helmets provided very poor resistance to concentrated loads produced during impacts with small, sharp objects but they had greater capacity than hard helmets to withstand distributed loads produced during impacts with flatter objects. The presence of the penetration test in the Australian Standard was determined to have produced the good all round performance of hard helmets which met its requirements. Two tests were proposed as alternatives to the penetration test. They would evaluate foam and hard helmets on equal terms at the cost of abandoning the requirement of helmets to withstand concentrated loads.
Low-mass vehicles and in particular low-mass electric vehicles as produced today in very small quantities are in general not designed for crashworthiness in collisions. Particular problems of compact low-mass cars are: reduced length of the car front, low mass compared to other vehicles, and heavy batteries in the case of an electric car. With the intention of studying design improvements, three frontal crash tests were run last year: the first one with a commercial, lightweight electric car; the second with a reinforced version of the same car; and the last one with a car based on a different structural design with a "hard-shell" car body. Crash tests showed that the latter solution made better use of the small zone available for continuous energy absorption. The paper discusses further the problem of frontal collisions between vehicles of different weight and, in particular, the side collision. A side-collision test was run with the hard-shell vehicle following the ECE lateral-impact test procedure at 50 km/h and led to results for the EuroSID1-dummy well below current injury tolerance criteria.
In a recent article the concept of studying craniofacial growth in space-time was introduced. The possibilities of carrying out such studies were demonstrated with the aid of some generalized shell of a bivalved mollusk. In this study presentations of space-time models of a real biologic model, the shell of the bivalved mollusk Cardium edule, have been constructed. Quantitative expressions of paths in space-time of anatomic and material points have been elaborated. A further analysis has shown that a number of the space-time presentations may represent biologic reality. They may be used for comparisons with presentations of skull models and may represent a tool for the better understanding of results from other studies.
The paper reports a re-evaluation of the previous studies on yeast by considering the influence of vacuole upon the dielectric properties of the cell. In this respect, relative permittivity and conductivity of yeast cells dispersed in KCI solutions of various concentrations were measured in the frequency range from 0.1 to 100 MHz. The analysis of data revealed that the beta-dielectric dispersion of yeast cell suspensions is a composite of three (or probably four) distinct sub-dispersions. Since the dielectric response of the cell wall was experimentally avoided (according to Asami et al. (1976) J. Membr. Biol. 28, 169-180), the two-shell model, related to the plasma membrane and the vacuolar membrane, respectively, appeared to be the best approximation for yeast cells. The most relevant parameters obtained with the aid of the two-shell model were as follows. Specific capacitance of the plasma membrane and the vacuolar membrane were 0.703 +/- 0.011 microF/cm2 and 0.483 +/- 0.029 microF/cm2, respectively; electrical conductivity of the cytoplasm and the vacuole interior were 0.515 +/- 0.028 S/m and 3.22 +/- 0.48 S/m; finally, the permittivity of the cytoplasm was 50.6 +/- 2.
A microdialysis probe was placed in either the shell or core compartment of the nucleus accumbens and rats were exposed to mild footshock. Extracellular dopamine levels in the shell of the nucleus accumbens were elevated during the 20-min collection period immediately after discontinuing footshock. In contrast, the levels of dopamine remained unaltered in the core of the nucleus accumbens.
Morphologically distinct subsets of mesotelencephalic neurons were sought following retrograde transport of Fluoro-Gold from iontophoretic injections relatively restricted to the medial shell, core or rostral pole subterritories of the nucleus accumbens. The diameter and lengths of Fluoro-Gold immunolabeled dendrites of medial shell-projecting neurons were less than those of core and rostral pole-projecting neurons.
The Pro.M.D. expert system shell (Pohl and Trendelenburg, Methods Inf Med 1988;27:111-117) is a computer program tool for knowledge-based computer interpretation of laboratory data. Competence reasoning deals with more or less vague knowledge. Vague knowledge is knowledge using vague data. In Pro.M.D. terminology, vague data are called 'semi-known'. Examples of semi-known numbers are numeric intervals like [5.2,8.8] (= all numbers between lower limit 5.2 and upper limit 8.8 are possible), or imprecise numbers like N[4,1] (= numbers vary around mean of 4 with standard deviation of 1). Semi-known qualitative data are ambiguous information on alternative values like low or normal (= from three alternatives low or normal are possible and high is impossible) or probability distributions on the alternatives like low in 60% or normal in 30% or high in 10% (= low, normal and high appear with the respective probabilities). Regarding vagueness, data may be divided into known data (unambiguous and precise information), semi-known data (ambiguous or imprecise information) or unknown data (no information). Semi-known data may be further subdivided into probabilistic data, where the probability distribution of domain values is known (e.g. Gaussian distribution) and possibilistic data, where probability distribution of domain values is not known (e.g. intervals). Probabilistic data may be obtained either by completely counting the population's individuals or by estimation from samples. In the latter case sample size is another measure for data vagueness. In the Pro.M.D. expert system shell functions are being implemented for input, output, calculation and testing of semi-known data. Thus, instruments for competence reasoning in Pro.M.D. will help to build up reliable and user friendly knowledge-based systems.
A generic, abstract model and the simulation shell based on it, both called SUMMERS, are used as a framework for the implementation of stochastic micropopulation models; in these, each individual is followed separately while moving through a sequence of states. The shell supports groups of interacting members, individual characteristics and multiple simultaneous activities. Stochastic decisions may be made using Monte Carlo rules. Keywords control the simulations and the reports generated. A sensitivity analysis utility allows assessment of the dependency of outcomes on model features. Extensive use has been made of software engineering techniques. Specializations of SUMMERS are described in subsequent papers.