PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Biodegradation”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74Linked to original sources

Photo-Fenton oxidation of oil mill waste water: chemical degradation and biodegradability increase.

The mill waste water holds a large amount of polyphenols, preventing the biodegradation processes because of their inhibitory action on microbial growth. Thus, its disposal represents an environmental problem for the great olive oil producing countries in the Mediterranean area. In this work, we present the preliminary results from the application of a photo-oxidative process on mill waste water to evaluate the organic matter degradation potential and the biodegradability of the treated residue. The total organic carbon is reduced up to 35% after 6 hours but the cost-effectiveness is unfavourable. In contrast, the aim of toxicity reduction is less expensive and shows good applicable chances; after 2 h, the polyphenols concentration drops by 60%.

Biodegradation, Environmental↗

A randomised study to evaluate the efficacy of a biodegradable stent in the prevention of postoperative urinary retention after interstitial laser coagulation of the prostate.

OBJECTIVE: Interstitial laser coagulation (ILC) of the prostate induces necrosis, oedema and increased risk for postoperative urinary retention. The present randomized study was carried out to investigate the feasibility and efficacy of a biodegradable self-reinforced polyglycolic acid (SR-PGA) stent in preventing postoperative urinary retention and the need for prolonged catheterization after ILC treatment. MATERIAL AND METHODS: 35 males with benign prostatic enlargement (BPE) entered the study: 21 in the ILC + stent group and 14 in the ILC group without a stent. A suprapubic catheter was inserted for all patients and ILC was performed. The SR-PGA stent was inserted immediately after laser therapy in the stent group and kept open until the next morning when it was closed and the patient started trying to void. The suprapubic catheter was removed after voiding had started and the urinary bladder emptied adequately. RESULTS: In the ILC + stent group voiding started on the first postoperative day in 17 patients and on the second day in 2 patients. Voiding was delayed in 2 cases: in 1 case due to inadequate length of the stent and in the other as a result of the stent placement being too proximal. There was 1 case of urinary retention due to early degradation of the stent. In the ILC-only group voiding started on average 6.1 days postoperatively. At 1 month follow-up, the mean peak urinary flow rate had increased significantly in the ILC + stent group (p < 0.05) but not in the ILC-only group (p = 0.26). Improvements in symptom scores were significant in both groups (p < 0.005) but in terms of the mean peak urinary flow rates at 6 months follow-up the improvement was significant only in the stent group (p < 0.05). CONCLUSIONS: The use of a SR-PGA stent enabled early voiding and is safe and effective in the treatment of postoperative urinary retention after ILC. The 3-4 week degradation time of the SR-PGA stent was too short for some patients. There is still a need for further development work to improve the stents and larger controlled studies to show the true value of biodegradable stents in the treatment of BPE.

Aged↗

Inhibition of rat hepatic cytochrome P450 activities by biodegradation products of 4-tert-octylphenol ethoxylate.

1. The effects of some biodegradation products of 4-tert-octylphenol ethoxylate (OPEO), namely 4-tert-octylphenol (OP), 4-tert-octylphenol diethoxylate (OP2EO) and 4-tert-octylphenol monocarboxylate (OPIEC) on the kinetics of cytochrome P450 (P450) -dependent monooxygenases in rat liver microsomes have been studied. 2. Testosterone 16beta-hydroxylase (TS16BH), testosterone 2alpha-hydroxylase (TS2AH) and testosterone 6beta-hydroxylase (TS6BH) activities were extensively inhibited by OP at 100 microM (56.0-90.3%). Inhibition was competitive for all P450-dependent monooxygenases. Ki(s) of TS16BH, TS2AH and TS6BH from Lineweaver-Burk plots were 6.37, 3.38 and 34.8 microM respectively. 3. The activities of acetanilide 4-hydroxylase (AA4H), 7-ethoxycoumarin O-deethylase (ECOD) and bufuralol 1'-hydroxylase (BF1'H) were also effectively inhibited by OP at 100 microM (48.6-56.0%). The inhibition of these P450-dependent monooxygenases was non-competitive, and Ki(s) (50.1-63.90 microM) were higher than those of TS16BH, TS2AH and TS6BH. 4. OP2EO also inhibited AA4H, ECOD, TS16BH, TS2AH, BF1'H and TS6BH activities by 38.7-69.3% at 100 microM, although the inhibition rates were slightly lower than those for OP. K(i)s were 14.4-106 microM, and the inhibition was of mixed type (AA4H and ECOD), competitive (TS16BH, TS2AH and TS6BH) and non-competitive (BF1'H). 5. Testosterone 7alpha-hydroxylase (TS7AH), 4-nitrophenol 2-hydroxylase (4NP2H) and lauric acid omega-hydroxylase (LAOH) activities were only slightly affected by OP and OP2EO. 6. The ability of OP1EC to inhibit P450-dependent monooxygenase activities was generally weaker than that of OP and of OP2EO: Ki >200 microM. 7. These results suggest that OPEO biodegradation products interact with constitutive P450 isoforms, CYP1A2, CYP2A2, CYP2B2, CYP2C11 and CYP3A2 in rat liver in vitro (OP > OP2EO > OP1EC), and that the mechanism of this interaction differs depending on the compound and P450 isoform.

7-Alkoxycoumarin O-Dealkylase↗

In vitro evaluation and intra-articular administration of biodegradable microspheres containing naproxen sodium.

The dispersion of non-steroidal antiinflammatory drugs (NSAIDs) into biodegradable polymeric matrices have been accepted as a good approach for obtaining a therapeutic effect in a predetermined period of time meanwhile minimizing the side effects of NSAIDs. In the present study, it was aimed to prepare Naproxen Sodium (NS), (a NSAID) loaded microsphere formulation using natural Bovine Serum Albumin (BSA) and synthetic biodegradable polymers such as poly(lactide-co-glycolic acid) (PLGA) (50:50 MW 34,000 and 88,000 Da) for intra-articular administration, and to study the retention of the drug at the site of injection in the knee joint. NS incorporated microspheres were evaluated in vitro for particle size (the mean particle size; for BSA microspheres, 10.0 +/- 0.3 microm, for PLGA microspheres, 9.0 +/- 0.2 and 5.0 +/- 0.1 microm for MW 34,000 and 88,000 Da, respectively), yield value, drug loading, surface morphology and drug release. For in vivo studies, monoarticular arthritis was induced in the left knee joints of rabbits by using ovalbumin and Freund's Complete Adjuvant as antigen and adjuvant. A certain time (4 days) is allowed for the formation of arthritis in the knee joints, then the NS loaded microspheres were injected directly into the articular cavity. At specific time points, gamma scintigrams were obtained to determine the residence time of the microspheres in knee joints, in order to determine the most suitable formulation. This study indicated that PLGA, a synthetic polymer, is more promising than the natural type BSA microspheres for an effective cure of mono-articular arthritis in rabbits.

Animals↗

Enhanced immune response with a combination of alum and biodegradable nanoparticles containing tetanus toxoid.

The purpose of the study was to determine the synergistic adjuvant effect of sustained release biodegradable nanoparticles in combination with alum. Nanoparticles containing tetanus toxoid (TT) were formulated using a biodegradable polymer, polylactic polyglycolic acid co-polymer (50:50, molecular weight 100000). The immunization studies were carried out subcutaneously in rats. The results were expressed as mean serum anti-TT IgG levels. I'he nanoparticles demonstrated a TT loading of 4% w/w with mean particle diameter of 238 +/- 31 nm. The TT encapsulated in nanoparticles was released slowly under in vitro conditions, with 67.5% cumulative release occurring in 20 days. A single injection of TT-nanoparticles (TT dose = 10 Lf) mixed with TT-Alum (TT dose= 5 Lf) induced a four-fold greater mean serum anti-TT IgG response than a single injection of TT nanoparticles alone (TT dose=15Lf) (2235 +/- 310 vs. 539 +/- 49 microg/ml, mean +/- sem, p = >0.001). In addition, the mean immune response induced with the single injection of combination of nanoparticles and alum was comparable to the two injections of TT-alum alone (5 Lf each dose) given at 3 week intervals IgG = 1998 +/- 333 microg/ ml). Furthermore, the combination induced a peak immune response (IgG = 4215 +/- 546 microg/ml) as early as the first time point at 3 weeks post-immunization. In the case of a TT-alum alone, the animals showed a weaker immune response at 3 weeks and required a second dose of TT-alum to enhance the antibody response. The data thus suggest that the combination of TT-nanoparticles and TT-alum acts as a much better adjuvant than nanoparticles or alum alone. A rapid induction of immune response is useful to curb the spread of communicable diseases in the case of an outbreak.

Adjuvants, Immunologic↗

Effect of additives on encapsulation efficiency, stability and bioactivity of entrapped lysozyme from biodegradable polymer particles.

Low encapsulation efficiency, incomplete and erratic release profiles are the most common features of controlled released protein delivery systems employing biodegradable polymers. In the present study, lysozyme as a model protein was encapsulated in biodegradable microspheres using solvent evaporation method and the effect of amphiphilic stabilizer, a basic salt and a lyoprotectant on microparticle formulation was evaluated. Incorporation rat serum albumin (RSA) in the internal aqueous phase during emulsion increased the encapsulation efficiency of lysozyme and maintained the bioactivity. Use of NaHCO3 improved the encapsulation efficiency of lysozyme from 15-94%, but at the cost of reduced in vitro release characteristics. Incorporation of both RSA and NaHCO3 improved the bioactivity of lysozyme and decreased burst release of the protein from the polymer particle, but reduced the encapsulation efficiency from 90-70%. Addition of sucrose in the internal aqueous phase lowered the encapsulation efficiency which was restored by its addition in the external aqueous phase. Maintenance of internal aqueous phase pH close to the iso-electric point of the protein and osmotic balance between the internal aqueous phase and the external aqueous phase during solvent evaporation method helped in better encapsulation of the protein drug. In vitro release of the lysozyme correlated with the effect of different excipients on entrapment in polymer matrix. Entrapment efficiency as high as 76%, low burst effect and high bioactivity of the entrapped lysozyme was observed from the polymer particles. Use of RSA, sucrose and NaHCO3 helped in a co-operative way towards the formulation of particles entrapping bioactive lysozyme.

Absorption↗

Fate of mutagenicity produced during anaerobic biodegradation of the herbicide chlornitrofen (CNP).

The mutagenicity of chlornitrofen (CNP)-containing solutions has been reported to increase during anaerobic biodegradation. In the present study, the fate of this increased mutagenicity under subsequent aerobic and anaerobic incubation conditions was investigated using two Salmonella tester strains, YG 1024 (a frameshift-detecting strain) and YG 1029 (a base-pair-substitution-detecting strain). Mutagenicity for both YG 1024 and YG 1029 strains increased during nine-day anaerobic biodegradation. During subsequent anaerobic incubation, the increased mutagenicity decreased gradually for YG 1029 but did not change significantly for YG 1024. By contrast, the increased mutagenicity decreased rapidly after the conversion to aerobic incubation for both YG 1024 and YG 1029 strains. The rapid decrease in mutagenicity during aerobic incubation was due to decreases, not only in an identified mutagenic metabolite (CNP-amino) but also in unidentified mutagenic metabolites.

Aerobiosis↗

Biodegradable microparticulates of beta-estradiol: preparation and in vitro characterization.

Beta-estradiol has been recommended for the long-term therapy of osteoporosis and its oral formulations are subjected to intensive first pass metabolism. The present investigation was aimed at preparing and characterizing biodegradable microparticles of beta-estradiol with polymers such as PLA, PLGA 85/15, PLGA 75/25, and their mixtures. The microparticles were prepared by solvent evaporation method using methylene chloride as a solvent and polyvinyl alcohol as a surfactant. The drug-polymer ratios were 1:3, 1:5, and 1:7. The prepared microparticles (twelve formulations) were tested for encapsulation efficiency and in vitro drug release in 50% methyl alcohol/phosphate buffer pH 7.4. The results showed that the encapsulation efficiency varied from 81 to 100% and the formulation fabricated from PLGA 85/15 (1:3) showed less burst and consistent long time release. This formulation when further characterized displayed irregular spherical shape with an average particle size of 72 microm. The crystallinity of the drug was reduced when investigated using X-ray diffractometry. No chemical interaction between the drug and the polymer was observed as evidenced by FT-IR analysis. The results indicated that beta-estradiol biodegradable microparticles with PLGA 85/15 (1:3) could be a suitable approach for long term therapy of osteoporosis.

Biodegradation, Environmental↗

A new technique for reconstruction of the common bile duct by an autologous vein graft and a biodegradable endoluminal stent.

The incidence of severe bile duct injuries has significantly increased since the introduction of laparoscopic cholecystectomy. The ideal reconstruction procedure for traumatic defects of the bile duct should be technically simple and should preserve both the physiological passage of bile and the sphincter of Oddi. In this article we describe a new technique for bile duct reconstruction in a pig model by means of an autologous vein graft that is splinted by a endoluminal biodegradable polylactate acid stent. In 12 pigs the external jugular vein was removed and used as an autologous vein graft. After performing a median laparotomy a 2-cm segment was resected from the bile duct. The common bile duct was reconstructed by a venous interponate that had been endoluminally stented by a biodegradable polylactate acid stent. For the examination of stent degradation, 2 pigs were sacrificed at 3, 4, and 5 months (stent degradation group) and the remaining 6 pigs at 6 months (survival group). All the pigs in the survival group survived for 6 months before being sacrificed. After 4 months the stent material had been completely broken down and the vein graft had been relined with bile duct epithelium. Thus, this new technique for bile duct reconstruction using an autologous vein graft with an endoluminal stent is simple to perform and reliable, and constitutes an interesting alternative to bilodigestive anastomosis due to the preservation of the papilla of Vateri.

Animals↗

Regulation of intracellular metabolism by biodegradable polyrotaxanes.

Cellular response to our designed biodegradable polyrotaxanes was investigated in terms of changes in cytoplasmic calcium levels in platelets. The polyrotaxanes regulated thrombin-induced calcium increase in platelets although constituent molecules of the polyrotaxanes showed fewer effects on the intracellular metabolism. Further, an increase in membrane fluidity of red blood cell ghosts was significantly observed by the addition of the polyrotaxanes. Static light scattering study revealed that the polyrotaxanes formed a supramolecular association state in relation to the molecular weight of PEG: a loosely packed association with a specific molecular shape. From these characteristics, it is suggested that supramolecular level interactions between the polyrotaxanes and cell membranes regulate the intracellular metabolism. It is concluded that these biodegradable polyrotaxanes can be feasible as temporarily-controlled bioactivator.

Animals↗

Anaerobic biodegradability of water separated from extracted crude oil.

A study of the anaerobic biodegradability of the three categories of water separated from extracted crude oil (Venezuelan oilfields)--light, medium or heavy crude--was carried out at laboratory scale using UASB reactors working at mesophilic conditions. Chemical oxygen demand (COD) removal in a low loaded UASB reactor fed with water separated from extracted light crude was high, with an average 87% purification efficiency. The remaining COD was made up of the nonbiodegradable and the very slowly biodegradable fractions of the organic matter in the water. During a second period, the hydraulic retention time was reduced in stages, thus increasing the loading rate. In the experimental conditions used, COD concentration at the outlet remained below the Venezuelan standard limit for discharge into the environment (350 mg COD l(-1)) when the hydraulic retention time (HRT) was above 10 hours and the OLR under 3 g COD l(-1) d(-1). For HRT less than 10 hours, or organic loading rate (OLR) greater than 3 g COD l(-1) d(-1), COD at the outlet of the reactor rose as a consequence both of increased volatile fatty acids (VFA) concentrations (indicating an overloading of the methanogenic population) and, also, of the increase in the non-VFA COD (indicating a decrease in the acidification efficiency). On the other hand, results with UASB reactors operated at a low loading rate and fed with water separated from extracted medium and heavy crude oil showed that purification efficiency was low, with only 20% and 37% COD removal respectively. Continuing the operation of the UASB reactor fed with water separated from medium oil over a prolonged period did not bring any improvement, indicating that no adaptation of the sludge occurred.

Bacteria, Anaerobic↗

The effect of amount of crude oil on extent of its biodegradation in open water- and sandy beach-laboratory simulations.

We examined the biodegradation of varying amounts of artificially weathered Alaskan North Slope crude oil in laboratory microcosm test systems that use natural seawater and simulate spills in open water and on sandy beaches. The model bioremediation treatment consisted of periodic applications of marine bacteria, selected to degrade n-alkanes and a range of aromatic compounds, suspended in a salts solution that supplied inorganic nitrogen and phosphorous. Beach microcosms dosed with low and high oiling lost an average of 22.5% and 11.3% oil weight, respectively. Open-water microcosms dosed with high and low oiling lost 19.1% and 2.9% oil weight, respectively. Thus, the lower doses of oil were more efficiently degraded. The model bioremediation treatment also affected a greater number of selected analytical endpoints in the lower-oil-dose than higher-dose experiments and the former showed more substantial degradation of recalcitrant components. Above a certain threshold oil concentration, bioremediation did not effectively remove oil. Below this threshold the distinction between active bioremediation treatment and intrinsic biodegradation of the controls was less prominent; i.e., fewer of the oil components were statistically depleted by remediation treatment relative to controls. Furthermore, the oil-dose range over which bioremediation was realized in these systems occurred at very low oiling levels. Thus, under the environmental conditions simulated in these microcosms, the effectiveness of bioremediation peaked over a rather narrow low-dose oiling range.

Biodegradation, Environmental↗

Removal of slowly biodegradable COD in combined thermophilic UASB and MBBR systems.

Starch, cellulose and polyvinyl alcohol (PVA) are common substrates of the slowly biodegradable COD (SBCOD) in industrial wastewaters. Removal of the individual and mixed SbCOD substrates was investigated in a combined system of thermophilic upflow anaerobic sludge blanket (TUASB) reactor (55 degrees C) and aerobic moving bed biofilm reactor (MBBR). The removal mechanisms of the three SBCOD substrates were quite different. Starch-COD was almost equally utilized and removed in the two reactors. Cellulose-COD was completely (97-98%) removed from water in the TUASB reactor by microbial entrapment and sedimentation of the cellulose fibers. PVA alone was hardly biodegraded and removed by the combined reactors. However, PVA-COD could be removed to some extent in a binary solution of starch (77%) plus PVA (23%). The PVA macromolecules in the binary solution actually affected the microbial activity in the TUASB reactor resulting accumulation of volatile fatty acids, which shifted the overall COD removal from the TUASB to the MBBR reactor where SBCOD including PVA-COD was removed. Since the three SBCOD substrates were removed by different mechanisms, the combined reactors showed a better and more stable performance than individual reactors.

Bacteria, Anaerobic↗

Nutrient stimulation of sulfolane biodegradation in a contaminated soil from a sour natural gas plant and in a pristine soil.

Natural gas in western Canada can contain up to 35% H2S. The Sulfinol process for sour gas treatment makes use of sulfolane and an amine to remove H2S and other sour components from natural gas. Sulfolane has leached into groundwaters at sour gas treatment plant sites, and poses a risk for off-site contamination. Sulfolane biodegradation was monitored in shake-flask cultures and air-sparged microcosms inoculated with uncontaminated topsoil or with sulfolane contaminated soil obtained near a Sulfinol process building at a sour gas treatment facility in western Canada. For both soils, supplementation with a source of fixed nitrogen stimulated sulfolane biodegradation. Topsoil cultures and microcosms were only slightly affected by the addition of phosphate. Contaminated soil microcosms and cultures were stimulated by phosphate addition, but not to the same degree as by the addition of nitrogen. For these cultures and microcosms, amendment with both fixed nitrogen and phosphate produced an additive effect. It was possible to predict the nutrient requirements of air-sparged microcosms inoculated with each soil type using shake-flask cultures. Shake-flask cultures require less time and effort and fewer materials than the more complex air-sparged soil microcosms, and will be useful for large-scale experiments to predict the nutrient supplements required for bioremediation of sulfolane-contaminated sites.

Bacteria, Aerobic↗

Biodegradability enhancement by wet oxidation in alkaline media: delignification as a case study.

Nowadays many industries are considering the recycling of process waters as a way of improving environmental safety, preventing pollution, and avoiding the loss of valuable production materials. One industry in the forefront of this trend is the pulp and paper industry. Lignin is a pollutant present in the mill process waters and such macromolecules can cause problems during biological treatment of process waters. Wet oxidation (WO) is a process that can be used as a pre-treatment method for lignin fragmentation and improvement of biodegradability. Wet oxidation (WO) under alkaline conditions permits faster lignin fragmentation than the conventional WO process and, therefore, should favour biodegradability improvement. In this study, the experiments were carried out in a high-pressure batch reactor with an alkali lignin solution at temperatures up to 438 K, an alkali concentration of 1.5-3.5 g l(-1) and an oxygen partial pressure of 0.4 to 1.5 MPa. At an alkali concentration of 3.5 g l(-1)1 and 0.4 MPa of oxygen partial pressure, an increase in BOD/COD ratio was achieved from an initial 11% to 71%. The experiments also showed that the amount of small molecules in the solution measured by Immediately Available BOD (IA BOD) depends on the amount of alkali added and the operating temperature.

Biodegradation, Environmental↗

Biodegradation of toluene by a lab-scale biofilter inoculated with Pseudomonas putida DK-1.

The biodegradation of toluene by biofiltration inoculated with Pseudomonas putida DK-1 was investigated with variation of the several environmental parameters, such as temperature, bed length, gas flow rate and optimal humidity zone. The optimal temperature range to treat toluene gas was found to be 32-35 degrees C. Increasing the gas flow rate showed an inverse effect on the elimination capacity and the removal efficiency. The optimal gas flow rate was obtained at 65 ml min(-1) from the relation between the removal efficiency and the elimination capacity. The biodegradation rate of the toluene with respect to the bed lengths (3, 6, 9, 12 and 15 cm) increased up to 80 h but was then independent of the bed lengths after 80 h except for the 3 cm bed length. The elimination capacity was improved by about 70% compared with that reported in other literature and was also in agreement with theoretical models.

Air Movements↗

Heap leaching of lead contaminated soil using biodegradable chelator [S,S]-ethylenediamine disuccinate.

The feasibility of heap leaching Pb contaminated soil using biodegradable chelator [S,S]-ethylenediamine disuccinate ([S,S]-EDDS) in concentrations ranging from 10 to 40 mmol kg(-1) was assessed in a laboratory study. Treatment with 40 mmol kg(-1) [S,S]-EDDS was the most efficient, removing 31.3% of soil Pb and producing a waste washing solution with a peak Pb concentration slightly exceeding 10 mM. The removal of Pb from simulated washing solution containing 10 mM Pb by biodegradation of the Pb-[S,S]-EDDS complex and sorption of the released Pb on a vermiculite/soya meal/Slovakite based permeable bed was completed in 7.5 days. Lead recovery from washing solutions with higher molarity was significantly slower. Lead fractionation and bioavailability were assessed 6-months after soil treatment. Heap leaching removed Pb proportionally from carbonates (approx. 25% Pb) and organic matter (> 50% Pb), the two main Pb-bearing soil fractions,and increased the small pool of Pb soluble in the soil solution. The latter had no effect on Pb phytoavailability. Accumulation of Pb in leaves of the reported hyperaccumulator species Thlaspi goesingense was < 20 mg kg(-1) in all treatments, comparable to the Pb concentration in lettuce (Latuca sativa). Soil treatment with 40 mmol kg(-1) [S,S]-EDDS reduced concentrations of Pb orally-accessible in the stomach and intestine phase from initial 234.0 and 52.5 mg kg(-1) to 157.8 and 29.7 mg kg(-1), respectively, according to Ruby's test. Our results indicate that heap leaching of Pb with [S,S]-EDDS is not a viable remediation option for the tested soil and conditions used.

Biodegradation, Environmental↗

Characteristics of biofilm community formed in the chlorinated biodegradable organic matter-limited tap water.

The aim of this study was to characterize the influence of free chlorine residual on biofilm formation in a chlorinated system in which the biodegradable organic matter (BOM) was limited. The biofilm community was characterized through a community-level physiological profile (CLPP) that was generated using the Biolog GN microplate-based community-level assay. The chlorinated system was run at chlorine residual concentrations of 0.3, 0.5, and 1.0 mg l(-1) with the provision of BOM-limited tap water (0.01 mg l(-1) as assimilable organic carbon and 0.06 mg l(-1) as biodegradable dissolved organic carbon). For comparison, an unchlorinated system was operated in parallel under the same condition. The number of viable heterotrophic bacteria in the biofilm that formed in the chlorinated system over the 3 months of operation averaged 7.2 x 10(3), 4.8 x 10, and 1.6 x 10 CFU cm(-2) for the chlorine residual concentrations of 0.3, 0.5, and 1.0 mg l(-1), respectively. In the unchlorinated system, the average bacterial content was 1.1 x 10(6) CFU cm(-2). Using measures of substrate utilization rate, substrate utilization diversity, and metabolic potential index (MPI), the CLPP patterns demonstrated that the metabolic potentials of the biofilm communities decreased markedly as the chlorine residual levels increased. In particular, the community level of the biofilm that formed in the system with chlorine residual concentration of 1.0 mg l(-1) was the lowest of any biofilm under the tested conditions. The results implied that chlorine residual had a positive biocidal effect on the metabolic potential and/or functional potential of the biofilm community, especially when the BOM level was low. In addition, BOM limitation by itself was not sufficient to control biofilm formation.

Biodegradation, Environmental↗