PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Waste Management”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74Linked to original sources

Health and nutrition survey of tsunami victims in Phang-Nga Province, Thailand.

The post-tsunami health and nutritional statuses of survivors were surveyed three months after the disaster struck. Non-participant observations and questionnaires were used to study the effects of the disaster on their lifestyles and health while residing in temporary shelters provided by the government and private donors. Anthropometrics were measured and dietary surveys conducted to elicit nutritional status. Our findings indicated good management of drinking water in the temporary shelters. Toilet construction and water supply were adequate, but wastewater and sewage systems were poorly managed. The study group still suffered from injuries after the disaster, and complained of back pain, stress, and sleep disorders. Most in the study group had unsatisfactory health behaviors, and obesity was an increasing problem among female participants.

Adolescent↗

PHS in the Queen City: a watershed development.

For over a century, Cincinnati, Ohio, has been at the center of the nation's efforts to control water pollution. Site and subject of PHS activities to understand, manage, and prevent pollution, Cincinnati now carries on this public health legacy as home to EPA's water pollution programs. From ante-bellum way station for primary care and the seat of early 20th century scientific contributions to vibrant center for the development of environmental health programs after World War II, the Queen City has truly provided a number of watershed developments in the history of public health.

History, 19th Century↗

Systematic approach to life support system analyses and integration.

This paper is devoted to the consideration of possible viewpoint on CELSS development and design. If the aim to create practically applicable CELSS is accepted then the task to optimize the process of CELSS research and development in terms of minimum cost, hours, maximum applicability, scientific contribution, etc. becomes actual. Requirements of applicability and scientific significance are synergetic since understanding of general properties of CELSS gives an ability to create CELSS for different applications. To accomplish the task three main groups of parameters have to be optimized: i) configuration and operating parameters of developing CELSS itself; ii) organizational management of research and development of CELSS; iii) features of an area where CELSS is planned to be used (space missions, terrestrial applications, or biosphere investigation) and where requirements to CELSS characteristic come from. Given paper is a brief review presented some attempts to arrange mentioned above into some set of formalized and interacting criteria, and some progression of research stages derived from these criteria.

Ecological Systems, Closed↗

Contaminants in sludge: implications for management policies and land application.

Policies on sludge (or biosolids) management vary widely, particularly when decisions must be made on what to do with the final product. This paper examines the two principal rationales with which such decisions are made, and through which scientific knowledge is included in the process. These rationales are risk analysis (risk assessment and management), and the criterion of sustainability. Both are found to be potentially arbitrary due to the difficulty in defining the individual constituents necessary to relate environmental phenomena to environmental policy. To place the difficulties in a practical context, this paper presents research results from three recent projects concerned with contaminants in sludge (phosphorus, flocculant polymers, and polymer-surfactant aggregates), and uses the findings to exemplify the dilemma encountered in policy making. A path forward is proposed.

Copper↗

Characterizing the risks to aquatic ecosystems: a tentative approach in the context of freshwater dredged material disposal.

The development of relevant frameworks for assessing ecological risks posed by dredged material management does not only involve an appropriate selection of assessment and measurement endpoints but also requires a sound approach to both risk characterization and the associated uncertainty. A formal methodology addressing both aspects has been developed in France for freshwater sediment deposits in water. Both exposure and effects measurements are 1st transformed into scores or classes. As far as possible, class boundaries are based on existing knowledge or expertise. Benthic organism exposure is based on a ratio of the deposit area to the burrow pit area, whereas pelagic species exposure is based on the ratio of porewater volume to water column volume. The combination of exposure and effect scores yields risk scores, or classes, which are linked to management decisions. Uncertainty is assessed with respect to a set of 4 predetermined criteria for exposure (the strength of association with the assessment endpoint, spatial and temporal representativeness, and the use of standard methods) and 4 criteria for effects (strength of association, the distinction between effect and no effect, sensitivity, and the use of standard methods). This approach was applied to 8 sediments from French canals contaminated to varying degrees.

Animals↗

Effluent management for a metal finishing industry aiming zero discharge conditions.

Technical applicability of zero discharge conditions is evaluated for the specific case of a large metal finishing industry located within the protection zone of a surface water body designated as a potential source for domestic water supply. Within the context of a sound water management strategy, a detailed process profile of the plant is established with relevant balance between water demand and wastewater generation. Quality restrictions for various water uses are identified. Wastewater flows are segregated depending on significant quality parameters. A comprehensive treatment scheme is defined for optimum wastewater recycle and reuse. Source allocation is made for the reuse of different streams of recycled wastewater. The study indicates that wastewater reuse can only be implemented with an efficiency of around 85-90% for the selected industry.

Chemical Industry↗

Sustainable sludge management in developing countries.

Worldwide, unsanitary conditions are responsible for more than three million deaths annually. One of the reasons is the low level of sanitation in developing countries. Particularly, sludge from these regions has a high parasite concentration and low heavy metal content even though the available information is limited. Different issues needed to achieve a sustainable sludge management in developing nations are analysed. Based on this analysis some conclusions arise: sludge management plays an important role in sanitation programs by helping reduce health problems and associated risks; investments in sanitation should consider sludge management within the overall projects; the main restriction for reusing sludge is the high microbial concentration, which requires a science-based decision on the treatment process, while heavy metals are generally low; adequate sludge management needs the commitment of those sectors involved in the development and enforcement of the regulations as well as those that are directly related to its generation, treatment, reuse or disposal; current regulations have followed different approaches, based mainly on local conditions, but they favour sludge reuse to fight problems like soil degradation, reduced crop production, and the increased use of inorganic fertilizers. This paper summarises an overview of these issues.

Biodegradation, Environmental↗

Components of dairy manure management systems.

Dairy manure management systems should account for the fate of excreted nutrients that may be of environmental concern. Currently, regulatory oversight is directed primarily at the assurance of water quality; N is the most monitored element. Land application of manure at acceptable fertilizer levels to crops produced on the farm by hauling or by pumping flushed manure effluent through irrigation systems is the basis of most systems. Nutrient losses to surface and groundwaters can be avoided, and significant economic value can be obtained from manure as fertilizer if adequate crop production is possible. Dairies with insufficient crop production potential need affordable systems to concentrate manure nutrients, thereby reducing hauling costs and possibly producing a salable product. Precipitation of additional nutrients from flushed manures with sedimented solids may be possible. Composting of separated manure solids offers a possible method to stabilize solids for distribution, but, most often, solids separated from dairy manures are fibrous and low in fertility. Manure solids combined with wastes from other sources may have potential if a marketable product can be produced or if sufficient subsidy is received for processing supplementary wastes. Solutions to odor problems are needed. Energy generated from manure organic matter, via anaerobic digestion, reduces atmospheric emissions of methane and odorous compounds. Use of constructed wetlands or harvesting of photosynthetic biomass from wastewater has the potential to improve water quality, making extensive recycling possible.

Agriculture↗

Water resources management in soft drink industry-water use and wastewater generation.

Water is used in most process industries for a wide range of applications. Processes and systems using water today are being subjected to increasingly stringent environmental regulations on effluents and there is growing demand for fresh water. These changes have increased the need for better water management and wastewater minimisation. In Morocco, water use in the food and drink industry is extensive at approximately 24 million m3 per year including 14% of drinking water in 1994. This study was conducted in a carbonate soft drink industry plant, during two years, 2001 and 2002. We have investigated the state of consumption and use of fresh water and the generation of the effluent in the factory. The aim of the study is to identify potential opportunities for reducing fresh water intake and minimising wastewater production by studying the posibility of reuse, recycling and treatment.

Conservation of Natural Resources↗

Feasibility versus sustainability in urban water management.

Decision making in urban water management is exemplified by the case of Austria: Although researchers define a comprehensible concept of sustainability, practitioners emphasize feasibility and accept limitations in sustainability. Could the specification of particular methods, chosen from some decision support methodology, remedy this situation? While an integrative assessment of sustainability should not be based on prescribed or standardized criteria, or even a certain assessment method, it should force the decision makers to make their chosen premise more visible. To this end a change of the decision making process is proposed, which will allow the decision makers to adapt the decision making process to the circumstances of a specific project in a way that is accepted by the stakeholders.

Cities↗

Implications of a kinematic wave model for first flush treatment design.

A deterministic model was developed to predict pollutant mass first flush and to utilize it for better design of best management practices (BMPs) that focus on treating the first flush. The model used the kinematic wave equation to calculate flow and mass transport, and erosion equations to calculate pollutant concentrations, which were assumed to be from a short and a long term source. The model parameters were calibrated with a parameter estimation procedure using three years' monitoring data from a highway runoff site in west Los Angeles. The simulation results showed that there exists an optimum watershed size to maximize first flush. Contours of watershed length, developed from simulations for different conditions of rainfall and watershed geometry, can be used to design runoff collection systems for highways and parking lots to maximize first flush.

Models, Theoretical↗

Using economic valuation techniques to inform water resources management: a survey and critical appraisal of available techniques and an application.

The need for economic analysis for the design and implementation of efficient water resources management policies is well documented in the economics literature. This need is also emphasised in the European Union's recent Water Framework Directive (2000/60/EC), and is relevant to the objectives of Euro-limpacs, an EU funded project which inter alia, aims to provide a decision-support system for valuing the effects of future global change on Europe's freshwater ecosystems. The purpose of this paper is to define the role of economic valuation techniques in assisting in the design of efficient, equitable and sustainable policies for water resources management in the face of environmental problems such as pollution, intensive land use in agriculture and climate change. The paper begins with a discussion of the conceptual economic framework that can be used to inform water policy-making. An inventory of the available economic valuation methods is presented and the scope and suitability of each for studying various aspects of water resources are critically discussed. Recent studies that apply these methods to water resources are reviewed. Finally, an application of one of the economic valuation methods, namely the contingent valuation method, is presented using a case study of the Cheimaditida wetland in Greece.

Agriculture↗

Methodology for management of endosulfan contaminated eluent.

Management of Endosulfan contaminated eluent (24 mg/l) resulting from a treatment process to remove Endosulfan from water with wood charcoal, was attempted using various methods viz. volatilisation, hydrolysis and sorption by viable cell bacteria with and without acclimatisation. Volatilisation failed in giving better result, as Endosulfan was not considerably volatile. It could achieve a removal efficiency of 1.4-2%. Hydrolysis resulted in 28.4% and 17.9% removal of Endosulfan in acidic and alkaline media, respectively. Viable cell bacteria (aerobic) without prior acclimatization showed efficiency of 89.7% and after prior acclimatisation showed 96% removal efficiency. Sorption by the acclimatized biomass was found a suitable method for the removal of Endosulfan at a concentration of 24 mg/l.

Bacteria, Aerobic↗

Neural networks as a tool for control and management of a biological reactor for treating hydrogen sulphide.

Based on an experimental database consisting of 194 daily cases, artificial neural networks were used to model the removal efficiency of a biofilter for treating hydrogen sulphide (H2S). In this work, the removal efficiency of the reactor was considered as a function of the changes in the air flow and concentration of H2S entering the biofilter. In order to obtain true representative values, the removal efficiencies (outputs) were measured 24 h after each input was changed. A MLP (multilayer perceptron 2-2-1) model with two input variables (unit flow and concentration of the contaminant fed into the biofilter) rendered good prediction values with a determination coefficient of 0.92 for the removal efficiency within the range studied. This means that the MLP model can explain 92% of the overall variability detected in the biofilter corresponding to a wide range of operating conditions.

Air Pollutants↗

Monitoring of ambient air PCDD/F levels in Portugal.

As part of a monitoring program conducted by IDAD--Institute for Environment and Development and supported by regional municipal solid waste (MSW) management authorities, dioxin concentrations in ambient air were measured in three regions of Portugal: Porto, Lisbon and Madeira. These independent studies were performed with the intention of providing data as a basis for the evaluation of potential impacts of the operation of recently built MSW incinerators. Thus, 170 samples were collected in nine different sites from January 1999 till present. The measured levels revealed an extremely variable content of PCDDs/PCDFs depending both on the area and the season of the year. Samples taken in Porto and Lisbon reveal a similar homologue structure even if concentrations measured in the Porto region are significantly greater. Data from Madeira is characteristic of a remote site with some of the congeners concentrations below the detection limit.

Air Pollutants↗

A pilot outreach program for small quantity generators of hazardous waste.

The Massachusetts Department of Environmental Management initiated a pilot project to improve compliance with hazardous waste regulations and management of hazardous wastes with auto body shops around the state. The program consisted of mass mailings, a series of workshops throughout the state, a coordinated inspection program by the state regulatory agency, and technology transfer. At the start of the program in January 1986, approximately 650 of the estimated 2,350 auto body shops in the state had notified EPA of their waste generating activities; by January 1987, approximately 1,200 shops had done so. Suggestions for improving program efforts include tailoring the outreach effort to the industry, government-sponsored research and development directed at the needs of small firms, mandatory participation in hazardous waste transportation programs, and better coordination by EPA of its information collection and distribution program.

Automobiles↗

Drinking water supply and management practices in British Columbia, 1997-98.

BACKGROUND: Questions regarding control over a water fluoridation system in a British Columbia (BC) community led to a drinking water management survey in 1997-98. METHOD: A questionnaire was constructed based on published drinking water control and management criteria and was sent to 91 communities. RESULTS: 73/91 surveys were returned (80% response rate); 31 reported a protected water supply system, 40 reported logging and/or cattle grazing in watershed areas, 25 reported a lack of primary disinfection. Water fluoridation was reported in 12 locations, 3 of which did not monitor fluoride levels. Testing for protozoans was done routinely in 19 locations, 15 using approved laboratories. 15 water contamination events were reported, 9 of biological origin. Statistically significant associations were found between contamination events and: wooden delivery systems, lack of primary chlorination, increased number of protozoan tests, and increased number of personnel. INTERPRETATION: At the time of the survey in British Columbia, a number of communities were vulnerable to preventable drinking water contamination.

British Columbia↗

Assessment of the viral removal capability of the International Space Station Water Recovery and Management system.

The development of the International Space Station (ISS) Water Reclamation and Management (WRM) system has been supported through integrated testing at NASA/Marshall Space Flight Center (MSFC). Assessment of the viral removal capabilities of the ISS water processor was performed as part of the hardware performance evaluation. For the Viral Challenge Test, a known concentration of viruses was mixed with human-generated wastewater and reclaimed using the ISS Water Processor. The composition and concentrations of the different wastewaters used for this test represented the combination of contaminants expected to be found in the wastewater that will be collected and recycled on board the ISS. The results from the Viral Challenge Test clearly showed that the ISS WRM has the capacity to reduce the concentration of viruses in the wastewater by 12 log10 units.

Ecological Systems, Closed↗