SEARCH · PubMed Health

Results for “Elastic Modulus”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75Linked to original sources

PubMed1978

Comparison of carotid artery mechanics in the rat, rabbit, and dog.

Cylindrical segments of carotid arteries from rat, rabbit, and dog were studied in vitro in order to compare active and passive mechanical properties, with gross morphology and composition. Pressure-diameter relations were determined under active (norepinephrine) and passive (2 mM EGTA) conditions, and were used to compute values of tangential wall stress, incremental elastic moduli, characteristic impedance, and active smooth muscle responses. The water and connective tissue contents of these segments were also determined. Significant differences were found in the passive mechanical properties of these arteries, with those of the rat being most compliant and those of the dog being the stiffest. These differences were consistent with the connective tissue content of these arteries. The ratio of collagen to elastin was smallest in the rat and largest in the canine carotids. Differences were also demonstrated in the responses to smooth muscle activation. The maximum value of active stress response was essentially the same in the canine and rabbit arteries, both of which were larger than that of the rat carotids. On the other hand, the rabbit vessels produced a larger maximum diameter response than either of the other arteries. Values of incremental elastic modulus were largest at specific values of transmural pressure for the rabbit vessels. This latter fact may make the contractile system more effective in reducing wall diameter in the rabbit arteries in spite of the fact that they did not have the capacity to generate a larger active stress response.

Animals↗

PubMed1999

In vivo human brachial artery elastic mechanics: effects of smooth muscle relaxation.

BACKGROUND: The effects of smooth muscle relaxation on arterial wall mechanics are controversial. We used a new, in vivo, noninvasive technique to measure brachial artery wall mechanics under baseline conditions and following smooth muscle relaxation with nitroglycerin (NTG). METHODS AND RESULTS: Eight healthy, normal subjects (6 male, 2 female; age 30+/-3.1 years) participated in the study. The nondominant brachial artery was imaged through a water-filled blood pressure cuff using an external ultrasound wall-tracking system at baseline and following 0.4 mg sublingual NTG. Simultaneous radial artery pressure waveforms were recorded by tonometry. Transmural pressure (TP) was reduced by increasing water pressure in the cuff. Brachial artery area, unstressed area, compliance, stress, strain, incremental elastic modulus (Einc), and pulse wave velocity (PWV) were measured over a TP range from 0 to 100 mm Hg. Baseline area versus TP curves generated 30 minutes apart were not significantly different. NTG significantly shifted area versus TP (P<0.0001) and compliance versus TP (P<0.001) curves upward, whereas the Einc versus TP (P<0.05) and PWV versus TP (P<0. 01) curves were shifted downward. NTG also significantly shifted stress versus strain (P<0.01) and Einc versus strain (P<0.01) curves to the right. CONCLUSIONS: We conclude that brachial artery elastic mechanics can be reproducibly measured over a wide range of TP and smooth muscle tone using a new noninvasive ultrasound technique. Smooth muscle relaxation with NTG increases isobaric compliance and decreases isobaric Einc and PWV in the human brachial artery.

Adult↗

PubMed2007

Hardness, elasticity, and ultrastructure of bonded sound and caries-affected primary tooth dentin.

Biomechanical properties of bonded dentin are important factors for resin restoration. We evaluated the hardness and elastic modulus of bonded sound and caries-affected primary tooth dentin using a one-step adhesive system, and observed the microstructure of the bonded interface. Six sound and six carious primary teeth were used. For sound teeth, flat occlusal dentin surfaces were prepared with a water-cooled high-speed diamond bur. For carious teeth, infected dentin was stained with a caries detector and removed with a water-cooled low-speed round steel bur and hand instruments. The prepared dentin was bonded with One-Up Bond F Plus (Tokuyama Dental Co., Tokyo, Japan). The resin-dentin interface and dentin beneath the interface were measured with a nano-indentation tester and observed with SEM and TEM. For both the carious and sound teeth, there was no significant difference between the hardness of the interfacial dentin and dentin 10-80 microm beneath the interface. However, the Young's modulus of the interfacial dentin was significantly lower than the dentin 40-80 microm (carious teeth) or 50-80 microm (sound teeth) beneath the interface. Both the hardness and Young's modulus of the interfacial dentin were not significantly different between the carious and sound teeth. Compared to the sound dentin, the hybrid layer on the caries-affected dentin was thicker and exhibited more complicated morphologic features. The thickness of the hybrid layers was generally less than 1 microm.

Dental Caries↗

PubMed1996

Preparation of giant liposomes in physiological conditions and their characterization under an optical microscope.

Unilamellar liposomes with diameters of 25-100 microns were prepared in various physiological salt solutions, e.g., 100 mM KCl plus 1 mM CaCl2. Successful preparation of the giant liposomes at high ionic strengths required the inclusion of 10-20% of a charged lipid, such as phosphatidylglycerol, phosphatidylserine, phosphatidic acid, or cardiolipin, in phosphatidylcholine or phosphatidylethanolamine. Three criteria were employed to identify unilamellar liposomes, yielding consistent results. Under a phase-contrast microscope those liposomes that showed the thinnest contour and had a vigorously undulating membrane were judged unilamellar. When liposomes were stained with the lipophilic fluorescent dye octadecyl rhodamine B, fluorescence intensities of the membrane of individual liposomes were integer multiples (up to four) of the lowest ones, the least fluorescent liposomes being those also judged unilamellar in the phase-contrast image. Micropipette aspiration test showed that the liposomes judged unilamellar in phase and fluorescence images had an area elastic modulus of approximately 160 dyn/cm, in agreement with literature values. The giant liposomes were stable and retained a concentration gradient of K+ across the membrane, as evidenced in fluorescence images of the K(+)-indicator PBFI encapsulated in the liposomes. Ionophore-induced K+ transport and associated volume change were observed in individual liposomes.

Elasticity↗

PubMed2001

Measurements and modelling of the compliance of human and porcine organs.

Stress-strain data obtained from animal and human tissue have several applications including medical diagnosis, assisting in surgical instrument design and the production of realistic computer-based simulators for training in minimal access surgery. Such data may also be useful for corroborating mathematical models of tissue response. This paper presents data obtained from ex-vivo and in-vivo tissue indentation tests using a small indentor that is similar to instruments used in minimal access surgery. In addition, uniform stress tests provide basic material property data, via an exponential stress-strain law, to allow a finite element method to be used to predict the response for the non-uniform stresses produced by the small indentor. Data are obtained from harvested pig liver and spleen using a static compliance probe. Data for human liver are obtained from volunteer patients, undergoing minor open surgery, using a sterile hand-held compliance probe. All the results demonstrate highly non-linear stress-strain behaviour. Pig spleen is shown to be much more compliant than pig liver with mean elastic moduli of 0.11 and 4.0 MPa respectively. The right lobe of human liver had a mean elastic modulus of about 0.27 MPa. However, a single case of a diseased liver had a mean modulus of 0.74 MPa--nearly three times the stiffness. It was found that an exponential stress-strain law could accurately fit uniform stress test data and that subsequent finite element modelling for non-uniform stress around a small indentor matched measured force characteristics.

Animals↗

PubMed2004

A buckling-based metrology for measuring the elastic moduli of polymeric thin films.

As technology continues towards smaller, thinner and lighter devices, more stringent demands are placed on thin polymer films as diffusion barriers, dielectric coatings, electronic packaging and so on. Therefore, there is a growing need for testing platforms to rapidly determine the mechanical properties of thin polymer films and coatings. We introduce here an elegant, efficient measurement method that yields the elastic moduli of nanoscale polymer films in a rapid and quantitative manner without the need for expensive equipment or material-specific modelling. The technique exploits a buckling instability that occurs in bilayers consisting of a stiff, thin film coated onto a relatively soft, thick substrate. Using the spacing of these highly periodic wrinkles, we calculate the film's elastic modulus by applying well-established buckling mechanics. We successfully apply this new measurement platform to several systems displaying a wide range of thicknessess (nanometre to micrometre) and moduli (MPa to GPa).

Crystallography↗

PubMed1976

The rheological factor in mucociliary clearance.

The viscoelastic properties of sputum samples obtained from bronchitic patients were measured and correlated with the speed at which the samples were transported by the ciliary action of isolated pharyngeal palates of bull frogs maintained in amphibian Ringers solution at 28 degrees C. The viscoelastic properties were measured at very low shear stress which allowed to express them in terms of Newtonian viscosity and linear elastic modulus, which greatly minimized the variations in such measurements previously experienced with sputum. Samples with lower values of viscosity and moduli (less than 10,000 poises and 15 dynes per square centimeter, respectively) showed faster transport rates in a system where ciliary beat frequency and volume of added mucus were kept relatively constant.

Animals↗

PubMed2000

The mechanical properties of fresh and cryopreserved arterial homografts.

OBJECTIVES: To assess the effect of cryopreservation on the elasticity and compliance of arterial allografts. MATERIALS AND METHODS: Iliofemoral segments of arteries and veins harvested from multiorgan donors were divided into two groups: fresh-control, tested for 24 hours after harvesting, and cryopreserved in liquid nitrogen after pretreatment with 20% dimethylsulphoxide and stored for an average time of 22 days. Vessel wall elastic properties were evaluated from the stress-strain relationship in a specially designed test cell fixed to the Instron Universal Testing Machine. RESULTS: The elastic modulus of the artery control group (1.54+/-0.33 MPa, n=20) was not significantly different from the cryopreserved group (1.69+/-0.61 MPa, n=15). Similarly, values for unfrozen veins (3.11+/-0.65 MPa, n=47) were not significantly different from those of frozen samples (2.71+/-0.85 MPa, n=38). Control compliance (6. 86+/-1.79x10(-5)%/Pa, for arteries; 3.84+/-0.81x10(-5)%/Pa, for veins) was similar to that of the cryopreserved group (6.66+/-1. 80x10(-5)%/Pa, for arteries; 4.16+/-1.21x10(-5)%/Pa, for veins). CONCLUSIONS: Cryopreservation maintains the important elastic properties of arterial and venous allografts during average storage time of 22 days.

Biomechanical Phenomena↗

PubMed2006

Effect of surface tension and surface elasticity of a fluid-fluid interface on the motion of a particle immersed near the interface.

The motion of a particle immersed in a fluid near a fluid-fluid interface is studied on the basis of the linearized Navier-Stokes equations. The motion is influenced by surface tension, dilatational surface elasticity modulus, and surface shear modulus, as well as by gravity. The backflow at the location of the particle after a sudden impulse has some universal features that are the same as for a rigid wall with stick boundary conditions. At short times the flow depends only on the mass densities of the two fluids. The nature of the short-time flow is calculated from potential flow theory. At a somewhat later time the particle shows a pronounced rebound. The maximum value of the rebound and the time at which the maximum occurs depend on the elastic properties of the interface.

Journal Article↗

PubMed1996

Three-dimensional degradable porous polymer-ceramic matrices for use in bone repair.

A degradable polymer-ceramic matrix for use as a bone graft material is described. The fabrication method used produces 3-dimensional macroporous matrices which are structurally similar to cancellous bone in their porosity, mechanically similar to cancellous bone in compressive elastic modulus and chemically comparable to the mineral matrix of bone in that they contain hydroxyapatite (HA). A 50:50 copolymer of poly(lactide/glycolide) (PLAGA) reinforced by a particulate calcium phosphate ceramic, HA, was used to create a matrix composed of polymeric microspheres. The channels between these spheres were pores approximately 100 microns in diameter. Four polymer/ceramic ratios were used in matrix fabrication: 1:0, 1:1, 2.5:1, and 5:1. The mechanical behavior of the material was found to vary with ceramic content. Increased levels of HA resulted in increased compressive elastic moduli. Prior to polymer degradation, moduli ranged from a high of 1459 MPa (50% HA) to a low of 293 MPa (0% HA). Degradation studies over a 6-week period showed that 0 and 16.7% HA-containing matrices lost up to 50% of their original weight, while the 28.6 and 50% IIA-containing matrices lost up to 20% of their original weight. Increased HA matrix content translated into decreased rates of matrix degradation. Environmental scanning electron microscopy (ESEM) confirmed that the polymer matrix contained pores that were interconnected during degradation. Viewed via ESEM, 10% HA containing matrices completely degraded by 6 weeks, while 50% HA matrices remained relatively stable. These studies indicate that the porous 3-dimensional polymer/ceramic matrix may potentially be useful as a synthetic material for bone repair.

Bone Substitutes↗

PubMed2004

Bending stiffness of a crystalline actin bundle.

The acrosomal process of the sperm of the horseshoe crab (Limulus polyphemus) is a unique crystalline actin bundle, consisting of multiple actin filaments cross-linked by the actin-bundling protein, scruin. For successful fertilization, the acrosomal bundle must penetrate through a 30 microm thick jelly coat surrounding the egg and thus it must be sufficiently stiff. Here, we present two measurements of the bending stiffness of a single crystalline bundle of actin. Results from these measurements indicate that the actin:scruin composite bundle has an average elastic modulus of 2 GPa, which is similar to that of a single actin filament, and a bending stiffness that is more than two orders of magnitude larger than that of a bundle of uncross-linked actin filaments due to stiffening by the scruin matrix.

Acrosome↗

PubMed2002

Elastic deformation of membrane bilayers probed by deuterium NMR relaxation.

In deuterium ((2)H) NMR spectroscopy of fluid lipid bilayers, the average structure is manifested in the segmental order parameters (S(CD)) of the flexible molecules. The corresponding spin-lattice relaxation rates (R(1Z) depend on both the amplitudes and the rates of the segmental fluctuations, and indicate the types of lipid motions. By combining (2)H NMR order parameter measurements with relaxation studies, we have obtained a more comprehensive picture of lipids in the liquid-crystalline (L(alpha)) state than formerly possible. Our data suggest that a lipid bilayer constitutes an ordered fluid, in which the phospholipids are grafted to the aqueous interface via their polar headgroups, whereas the fatty acyl chains are in effect liquid hydrocarbon. Studies of (2)H-labeled saturated lipids indicate their R(1Z) rates and S(CD) order parameters are correlated by a model-free, square-law functional dependence, signifying the presence of relatively slow bilayer fluctuations. A new composite membrane deformation model explains simultaneously the frequency (magnetic field) dependence and the angular anisotropy of the relaxation. The results imply the R(1Z) rates are due to a broad spectrum of 3-D collective bilayer excitations, together with effective axial rotations of the lipids. For the first time, NMR relaxation studies show that the viscoelastic properties of membrane lipids at megahertz frequencies are modulated by the lipid acyl length (bilayer thickness), polar headgroups (bilayer interfacial area), inclusion of a nonionic detergent (C(12)E(8)), and the presence of cholesterol, leading to a range of bilayer softness. Our findings imply the concept of elastic deformation is relevant on lengths approaching the bilayer thickness and less (the mesoscopic scale), and suggest that application of combined R(1Z) and S(CD) studies of phospholipids can be used as a simple membrane elastometer. Heuristic estimates of the bilayer bending rigidity kappa and the area elastic modulus K(a) enable comparison to other biophysical studies, involving macroscopic deformation of thin membrane lipid films. Finally, the bilayer softness may be correlated with the lipid diversity of biomembranes, for example, with regard to membrane curvature, repulsive interactions between bilayers, and lipid-protein interactions.

Cholesterol↗

PubMed2005

Epithelial cell deformation during surfactant-mediated airway reopening: a theoretical model.

A theoretical model is presented describing the reopening by an advancing air bubble of an initially liquid-filled collapsed airway lined with deformable epithelial cells. The model integrates descriptions of flow-structure interaction (accounting for nonlinear deformation of the airway wall and viscous resistance of the airway liquid flow), surfactant transport around the bubble tip (incorporating physicochemical parameters appropriate for Infasurf), and cell deformation (due to stretching of the airway wall and airway liquid flows). It is shown how the pressure required to drive a bubble into a flooded airway, peeling apart the wet airway walls, can be reduced substantially by surfactant, although the effectiveness of Infasurf is limited by slow adsorption at high concentrations. The model demonstrates how the addition of surfactant can lead to the spontaneous reopening of a collapsed airway, depending on the degree of initial airway collapse. The effective elastic modulus of the epithelial layer is shown to be a key determinant of the relative magnitude of strains generated by flow-induced shear stresses and by airway wall stretch. The model also shows how epithelial-layer compressibility can mediate strains arising from flow-induced normal stresses and stress gradients.

Animals↗

PubMed1997

Effects of various collagen crosslinking techniques on mechanical properties of collagen film.

We examined the relationship between collagen crosslinking techniques and dentinum reinforcement. In the present study, the tensile tests, imbibition test and antienzyme test were performed on collagen films mainly composed of type I collagen after ultraviolet irradiation and immersion in tannic acid and glutaraldehyde. The elastic modulus increased with the reaction time, but reduction of elongation at breaking point and increased stiffness were observed. This tendency was enhanced by ultraviolet irradiation. Tannic acid treatment resulted in slower crosslinking than the other two techniques. Antienzyme activity was markedly increased by treatment with tannic acid and glutaraldehyde.

Animals↗

PubMedDate not supplied

Strengthening composite resin restorations with ceramic whisker reinforcement.

Due to their tendency to fracture, current composite formulations are unsuitable for use in large stress-bearing direct posterior restorations that involve cusps. This study investigated the use of single-crystalline ceramic whiskers for the reinforcement of composite resins. The whisker-reinforced composite materials exhibited physical characteristics (i.e., flexural strength, work-of-fracture, and elastic modulus) that were significantly greater (P < 0.05; Student's t test) than those of traditional composite formulations. The experimental materials also had a surface smoothness that was essentially comparable to hybrid composite control specimens.

Bisphenol A-Glycidyl Methacrylate↗

PubMed1996

Some pharmacological and elastic characteristics of isolated subcutaneous small arteries from patients with essential hypertension.

OBJECTIVE: To investigate the elastic characteristics of the wall of isolated subcutaneous resistance arteries from patients with essential hypertension, the response of the vessels to endothelium-dependent and -independent vasodilators and the dependence on calcium. METHODS: Subcutaneous resistance arteries were isolated from 16 patients with never-treated essential hypertension and from 16 normotensive controls matched for age and sex. The vessels were mounted in a myograph for isometric force development. The passive elastic characteristics were determined and then the response to acetylcholine, nitroprusside, felodipine, caffeine and calcium (in the presence of noradrenaline and prazosin or yohimbine) were determined. RESULTS: Young's elastic modulus as a function of wall stress was similar in the two groups of vessels. The relaxation of vessels from hypertensive and normotensive in response to acetylcholine, nitroprusside and felodipine was also similar. However, the response to caffeine was increased in vessels from the hypertensive patients, although the relationship between the dependence on the effect of calcium on the behaviour of arteries from hypertensives and controls was similar in the presence of prazosin and yohimbine. CONCLUSIONS: The altered morphology of subcutaneous resistance arteries from hypertensives is not caused by a change in the elastic characteristics of the wall material. The data support our previous observation of abnormal calcium handling in vessels from hypertensives, although they do not support the hypothesis that a generalized abnormality in endothelium-dependent or endothelium-independent relaxation is of importance in essential hypertension.

Acetylcholine↗

PubMed2003

The effect of diffusion, depolymerization and nucleation promoting factors on actin gel growth.

In eukaryotic cells, localized actin polymerization is able to deform the plasma membrane and push the cell forward. Depolymerization of actin filaments and diffusion of actin monomers ensure the availability of monomers at sites of polymerization, and therefore these processes must play an active role in cellular actin dynamics. Here we reveal experimental evidence that actin gel growth can be limited by monomer diffusion, consistent with theoretical predictions. We study actin gels formed on beads coated with ActA (and ActA fragments), the bacterial factor responsible for actin-based movement of Listeria monocytogenes. We observe a saturation of gel thickness with increasing bead radius, the signature of diffusion control. Data analysis using an elastic model of actin gel growth gives an estimate of 2x10(-8) cm(-2) s(-1) for the diffusion coefficient of actin monomers through the gel, ten times less than in buffer, and in agreement with literature values in bulk cytoskeleton, providing corroboration of our model. The depolymerization rate of actin filaments and the elastic modulus of the gel are also evaluated. Furthermore, we qualitatively examine the different actin gels produced when ActA fragments interact with either VASP or the Arp2/3 complex.

Actin-Related Protein 2↗

PubMed2004

Synthesis and characterisation of poly(2-hydroxyethyl methacrylate) polyelectrolyte complexes.

Copolymerisation of charged and neutral monomers is a well-known methodology to introduce charged moieties in a polymeric chain to obtain polyelectrolytes. New polyelectrolyte complexes have been synthesised by radical copolymerisation of neutral methacrylic monomer 2-hydroxyethyl methacrylate (HEMA) with cationic 2-methacryloyloxyethyltrimethyl ammonium chloride and anionic 2-acrylamido-2-methylpropane-sulphonic acid monomers in 10:1:1 and 10:1:2 stechiometric ratio. Chemical structure of the synthesised terpolymers was confirmed by FT-IR spectroscopy, moreover, X-ray photoelectron spectroscopy showed the presence of a cationic charge excess on the 10:1:2 terpolymer surface with respect to 10:1:1 terpolymer. Swelling studies for 10:1:2 terpolymers showed a high water content in the swollen state and a "smart behaviour" upon changes in external stimuli such as pH, while, 10:1:1 terpolymer presented the behaviour of a neutral polymer. Mechanical and differential scanning calorimetry analysis confirmed that terpolymer networks were stabilised by ionic co-operative interactions. Infact, the inclusion of oppositely ionic charges in the polymeric network of p(HEMA) represent a way to achieve higher elastic modulus as they stabilise the terpolymer networks. Cytotoxicity and cytocompatibility studies demonstrated that all materials were not toxic, moreover, the presence of a cationic charge excess on 10:1:2 terpolymer surface was able to promote fibroblast adhesion.

Absorption↗