SEARCH · PubMed Health

Results for “Tissue Engineering”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75Linked to original sources

PubMed2002

Evaluating 3D bone tissue engineered constructs with different seeding densities using the alamarBlue assay and the effect on in vivo bone formation.

Bone tissue engineering using patient derived cells seeded onto porous scaffolds has gained much attention in recent years. Evaluating the viability of these 3D constructs is an essential step in optimizing the process. The alamarBlue (aB) assay was evaluated for its potential to follow in vitro cell proliferation on architecturally standardized hydroxyapatite scaffolds. The impact of the aB assayed and seeding density on subsequent in vivo bone formation was investigated. Twelve scaffolds were seeded with various densities from 250 to 2.5x10(6) cells/scaffold and assay by aB at 5 time points during the 7-day culture period. Twelve additional scaffolds were seeded with 2.5x10(5) cells/scaffold. Two control and 2 aB treated scaffolds were subcutaneously implanted into each of 6 nude mice for 6 weeks. Four observers ranked bone formation using a pair wise comparison of histological sections form each mouse. The aB assay successfully followed cell proliferation, however, the diffusion kinetics of the 3D constructs must be considered. The influence of in vitro aB treatment on subsequent in vivo bone formation cannot be ruled out but was not shown to be significant in the current study. The aB assay appears to be quite promising for evaluating a maximum or end-point viability of 3D tissue engineered constructs. Finally, higher seeding densities resulted in more observed bone formation.

Journal Article↗

PubMedDate not supplied

Biological evaluation of chitosan salts cross-linked to genipin as a cell scaffold for disk tissue engineering.

Degenerative disc disease has been implicated as a major component of spine pathology. However, although biological repair of the degenerate disk would be the ideal treatment, there is no universally accepted scaffold for tissue engineering of the intervertebral disk. To help remedy this, we investigated the gelation kinetics of various concentrations (2.5 to 10%) of two water-soluble chitosan chlorides (low molecular weight Protasan UP CL113 and high molecular weight Protasan UP CL213) and two chitosan glutamates (low molecular weight Protasan UP G113 and high molecular weight Protasan UP G213). Various concentrations (5 to 20%) of genipin, a naturally occurring cross-linking reagent used in herbal medicine and in the fabrication of food dyes, were used to prepare cross-linked chitosan hydrogels. The results show that 2.5% Protasan UP G213 cross-linked to 5% genipin was the best candidate. This formulation gelled fastest at 37 degrees C, and maintained 95% viability of encapsulated cultured disk cells. The gel did not produce an inflammatory reaction when injected subcutaneously into C57BL/6 mice and is therefore biocompatible. Most importantly, when injected into the degenerated nucleus pulposus of human cadaveric intervertebral disk, the gel flowed into the clefts without leakage. This study demonstrates that 2.5% Protasan UP G213 cross-linked to 5% genipin might be a promising scaffold for disk tissue engineering.

Aged↗

PubMed2006

Tissue-engineered graft constructed by self-derived cells and heterogeneous acellular matrix.

BACKGROUND: Endothelial and smooth muscle cells were used as seeding cells and heterogeneous acellularized matrix was used as scaffold to construct the tissue-engineered graft. METHODS: A 2 weeks piglet was selected as a donor of seeding cells. Two-centimetre length of common carotid artery was dissected. Endothelial cells and smooth muscle cells were harvested by trypsin and collagenase digestion respectively. The isolated cells were cultured and expanded using routine cell culture technique. An adult sheep was used as a donor of acellularized matrix. The thoracic aorta was harvested and processed by a multi-step decellularizing technique to remove the original cells and preserve the elastic and collagen fibers. The cultured smooth muscle cells and endothelial cells were then seeded to the acellularized matrix and incubated in vitro for another 2 weeks. The cell seeded graft was then transplanted to the cell-donated piglet to substitute part of the native pulmonary artery. RESULTS: The cultured cells from piglet were characterized as endothelial cells by the presence of specific antigens vWF and CD31, and smooth muscle cells by the presence of specific antigen alpha-actin on the cell surface respectively with immunohistochemical technique. After decellularizing processing for the thoracic aorta from sheep, all the cellular components were extracted and elastic and collagen fibers kept their original morphology and structure. The maximal load of acellular matrix was decreased and 20% lower than that of untreated thoracic aorta, but the maximal tensions between them were not different statistically and they had similar load-tension curves. Three months after transplantation, the animal was sacrificed and the graft was removed for observation. The results showed that the inner surfaces of the graft were smooth, without thrombosis and calcification. Under microscopy, a great number of growing cells could be seen and elastic and collagen fibers were abundant. CONCLUSION: Cultured self-derived endothelial and smooth muscle cells could be used as seeding cells and heterogeneous acellularized matrix could be used as scaffold in constructing tissue-engineered graft.

Animals↗

PubMed2006

Mechanobiological conditioning of stem cells for cartilage tissue engineering.

Articular cartilage possesses little capacity for endogenous repair after having been damaged by disease or trauma. Various surgical procedures depending on ingrowth of mesenchymal stem cells into the defects showed repair with fibrocartilage which is of minor quality and less resistant against physical forces. New treatment options using Tissue Engineering strategies for cartilage repair showed intriguing results. Human mesenchymal stem cells (MSC) isolated from bone marrow are becoming increasingly recognized for their potential to generate different cell types and thereby function effectively in vitro or in vivo in tissue repair. Incorporation of MSCs in suitable tissue engineering scaffolds and culture in chondrogenic medium can produce cartilage-like tissue. MSCs can be harvested from bone marrow by a small puncture of the iliac crest of patients. In contrast to chondral based repair this small procedure creates no additional harvest defect in the knee joints of the patient. Numerous publications show the beneficial influence of mechanobiological conditioning (e.g. mechanical compression, hydrostatic pressure, osmotic, shear, ultrasound) on the chondrogenic differentiation of dedifferentiated chondrocytes. In contrast to chondrocytes and cartilage explants there are few studies that examine the influence of mechanobiological stress on mesenchymal progenitor cells undergoing chondrogenesis. Using an in vitro aggregate culture system enhanced chondrogenesis of mesenchymal progenitor cells, detected by an increased extracellular matrix deposition of collagen and aggrecan, could be shown under repeated cyclic hydrostatic pressure. Similar results, with an increase in chondrogenic differentiation of mesenchymal progenitor cells could be detected, when the cells were loaded in three-dimensional matrices and subjected to cyclic, compressive load or low-intensity pulsed ultrasound. This review will summarize the current state of knowledge in the field of mechanobiological conditioning of mesenchymal stem cells and its possible clinical application.

Animals↗

PubMedDate not supplied

Experimental study on in situ tissue engineering of the stomach by an acellular collagen sponge scaffold graft.

We carried out an experimental study to clarify the feasibility of stomach tissue engineering for reconstruction after partial gastrectomy. A collagen sponge scaffold was implanted to support the regeneration of stomach tissue. A 4 cm square area of the anterior wall of the stomach was surgically resected in three beagle dogs, and then reconstructed using the collagen sponge scaffold. The dogs received intravenous hyperalimentation for 14 days after the operation, and a silicone sheet was used as a patch on the luminal side to protect the scaffold from degradation by digestive juice. The silicone sheet was removed endoscopically 4 weeks after the operation, and the surgical defect was observed endoscopically at various time points. At 4 weeks after surgery, the stomach wall had regenerated, but was not yet covered by stomach mucosal tissue. However, at 16 weeks after surgery, mucosa totally covered the regenerated area. Microscopic findings confirmed regeneration of the stomach wall, mucosa, and thin muscular layer. These results show that tissue engineering of the stomach will be feasible in the near future for reconstruction after partial gastrectomy.

Absorbable Implants↗

PubMed2006

Constructing a tissue-engineered ureter using a decellularized matrix with cultured uroepithelial cells and bone marrow-derived mononuclear cells.

This study investigated the efficacy of the ureteral decellularized matrix (UDM) as a scaffold material for a tissue-engineered ureter, and the effect of bone marrow-derived mononuclear cells (BM-MNC) on the neovascularization of the scaffold. Canine ureters were treated with deoxycholic acid to remove all cells. Uroepithelial cells (UEC) were obtained from canine bladders, cultured, and then seeded onto the inner surface of the UDM before transplantation into the subcutaneous space of nude mice or the omentum of nude rats. The cultured UECs began showing vacuolar degeneration 3 days after transplantation and gradually disappeared thereafter. To facilitate neovascularization in the implant, BM-MNCs were seeded around the UDM before transplantation. This facilitated the survival of the UECs, which formed three to five cellular layers after 14 days. The mean microvessel density was significantly increased in tissues seeded with BM-MNCs. However, cell-tracking experiments revealed that the increased number of capillaries in the experimental group was not due to the direct differentiation of transplanted endothelial progenitor cells. Our results demonstrate that the UDM is a useful scaffold for a tissue-engineered ureter, especially when seeded with BM-MNCs to enhance angiogenesis.

Animals↗

PubMed2006

Direct magnetic tubular cell seeding: a novel approach for vascular tissue engineering.

Optimizing seeding efficiency, reducing delayed culture periods and mimicking native tissue architecture are crucial requirements for the development of seeding procedures in tissue engineering. In vascular applications, the tubular geometry of the grafts further hampers the efficient delivery of cells onto the scaffold. To overcome these limitations, a novel technology based upon the use of magnetic fields is presented in this study: a radial magnetic force drives the cells immediately onto the luminal surface of a tubular scaffold and immobilizes the cells on the substrate's surface promoting cell attachment. Human smooth muscle cells (SMCs) labeled with CD44 magnetic Dynabeads were successively seeded onto the luminal surface of a tubular shaped collagen membrane. After 5 h, one additional layer of human umbilical vein endothelial cells (HUVECs) labeled with CD31 magnetic Dynabeads was seeded onto the luminal SMCs. The co-culture was incubated during 5 days prior to analysis. Cell viability and expression profiles were preserved during the entire seeding process. Histological examination of the constructs highlighted densely packed multilayers of SMCs covered by a monolayer of endothelial cells. SEM inspection confirmed a heterotypic multilayer assembly formed by multiple layers of elongated SMCs covered by a single layer of endothelial cells. Seeding kinetics of HUVECs and SMCs showed over 90% seeding efficiency after 20 and 40 min magnetic exposure respectively. Magnetically induced cell seeding provides a valuable tool for rapid seeding procedures of tubular scaffolds while complying with the histological architecture of tissue.

Animals↗

PubMed2005

[The research of assembling animal models of keloid employing the method of tissue engineering].

OBJECTIVE: To build animal models of keloid by method of tissue engineering and to discuss the feasibility of using it in clinical and lab researches. METHODS: Fibroblasts(FB) were isolated from keloids and cultured. The seventh and eighth generation of the cultured FBs were inoculated into the copolymers of polylactic acid and polyglycolic PLGA. After being cultured in rotatory cell culture system (RCCS) for 1 week, the FB was transplanted into athymic mice. The specimens were obtained 4 weeks and 8 weeks and examined histologically. RESULTS: All mice survived. The collagen patterns of all keloids were pressed in every specimen obtained 8 weeks. Fibrocytes and FB were observed in specimens by electronic microscope. There were abundant rough endoplasmic reticulum (RER) in FB, which indicated that FB's capability of synthesizing and secreting collagen was preserved and the cellular characteristic was remained. CONCLUSION: There is a good affinity between PLGA and FB. The composition of PLGA and FB can form keloids in athymic mice, so that it deserves further researching and developing.

Adult↗

PubMed2006

Crosslinked poly(epsilon-caprolactone/D,L-lactide)/bioactive glass composite scaffolds for bone tissue engineering.

A series of elastic polymer and composite scaffolds for bone tissue engineering applications were designed. Two crosslinked copolymer matrices with 90/10 and 30/70 mol % of epsilon-caprolactone (CL) and D,L-lactide (DLLA) were prepared with porosities from 45 to 85 vol % and their mechanical and degradation properties were tested. Corresponding composite scaffolds with 20-50 wt % of particulate bioactive glass (BAG) were also characterized. Compressive modulus of polymer scaffolds ranged from 190+/-10 to 900+/-90 kPa. Lactide rich scaffolds absorbed up to 290 wt % of water in 4 weeks and mainly lost their mechanical properties. Caprolactone rich scaffolds absorbed no more than 110 wt % of water in 12 weeks and kept their mechanical integrity. Polymer and composite scaffolds prepared with P(CL/DLLA 90/10) matrix and 60 vol % porosity were further analyzed in simulated body fluid and in osteoblast culture. Cell growth was compromised inside the 2 mm thick three-dimensional scaffold specimens as a static culture model was used. However, composite scaffolds with BAG showed increased osteoblast adhesion and mineralization when compared to neat polymer scaffolds.

Biocompatible Materials↗

PubMed2003

Ex vivo gene therapy in autologous bone marrow stromal stem cells for tissue-engineered maxillofacial bone regeneration.

This study examines the clinical relevance of tissue engineering integrating gene therapy and polymer science to bone regeneration. Bilateral maxillary defects (3 x 1.2 cm(2)) in 20 miniature swine were bridged with a bioresorbable internal splint. Constructs were created using ex vivo adenovirus bone morphogenetic protein (BMP)-2-mediated gene transfer to the expanded bone marrow mesenchymal stem cells (MSCs) 7 days before implantation. Controls were performed using adenovirus beta-galactosidase. The BMP-2 cell/construct displayed white solid bone formation after 3 months. Meanwhile, the hematoxylin and eosin and Von Kossa stains demonstrated exhibited mature woven bone with good mineralization. Additionally, three-dimensional computer tomography imaging revealed a nearly complete infraorbital rim repair. Quantitative analysis demonstrated a significant difference (P<0.001) in bone formation. Finally, biomechanical testing revealed no statistically significant difference in the maximal compressive strength of new bone formed by BMP-2 cell constructs and the normal maxilla. The data evidenced de novo bone formation capable of sustaining axial compressive loads. The measurement results showed that ex vivo replication defective adenovirus-mediated human BMP-2 gene transfer to MSCs enhances autologous bone formation in the repair of maxillary defects.

Adenoviridae↗

PubMedDate not supplied

Incorporation of intact elastin scaffolds in tissue-engineered collagen-based vascular grafts.

Although collagen-based tissue-engineered blood vessels (TEBVs) have many interesting properties and have been utilized to study aspects of vascular biology, these constructs are too weak to be implanted as bypass grafts for in vivo investigations. This study presents a method to incorporate organized, intact elastin into collagen-based TEBVs to form hybrid constructs that better mimic arterial physiology and exhibit improved mechanical properties. Porcine carotids were digested with a series of autoclave and chemical treatments to elicit isolated elastin scaffolds. Elastin purity was verified via immunohistochemistry and amino acid analysis. Isolated scaffolds were combined with type I collagen and either human dermal fibroblasts (HDFs) or rat smooth muscle cells (RASMs) to form an elastin hybrid TEBV. Hybrid constructs exhibited increased tensile strengths (11-fold in HDFs; 7.5-fold in RASMs) and linear stiffness moduli (4-fold in HDFs; 1.8-fold in RASMs) compared with collagen control constructs with no exogenous elastin scaffold. Viscoelastic properties of the TEBVs also improved with the addition of an ancillary elastin scaffold as determined through stepwise stress relaxation analysis. Whereas the majority of resistance to deformation in collagen control constructs stemmed from viscous fluidlike effects, elastin hybrid constructs exhibited more ideal elastic solid mechanical behavior. Thus, elastin scaffolds can help recreate the elastic properties of native arteries. Future challenges include stimulating appropriate reorganization or synthesis of the collagen matrix to provide the necessary strength and viscoelastic properties for implantation.

Animals↗

PubMed2002

Static and dynamic compression modulate matrix metabolism in tissue engineered cartilage.

Static and dynamic compression are known to modulate the metabolism of articular cartilage. The present study focused on determining the effects of compressive loading on the metabolism of sulfated glycosaminoglycans (S-GAG) and protein in tissue engineered cartilage constructs. Cartilage constructs were subjected to static or dynamic compression for 24 h and radiolabeled with 35SO4 and 3H-proline to assess the total synthesis and percentage retention of S-GAG and total protein, respectively. Static compression at an amplitude of 50% suppressed the synthesis of both S-GAG and protein by 35% and 57%, respectively. Dynamic compression at an amplitude of 5% had stimulatory effects on synthesis that were dependent on the static offset compression amplitude (10% or 50%) and dynamic compression frequency (0.001 or 0.1 Hz). Thus, tissue engineered cartilage demonstrated the ability to respond to mechanical loading in a manner similar to that observed with articular cartilage. Mechanical loading may therefore potentially be used to modulate the growth of cartilaginous tissues in vitrd, potentially facilitating the culture of functional cartilage tissues suitable for implantation.

Animals↗

PubMed2003

Early failure of the tissue engineered porcine heart valve SYNERGRAFT in pediatric patients.

OBJECTIVES: The first tissue engineered decellularized porcine heart valve, Synergraft (Cryolife Inc., USA) was introduced in Europe as an alternative to conventional biological valves. This is the first report of the rapid failure of these new grafts in a small series. MATERIALS AND METHODS: In 2001, 2 model 500 and 2 model 700 Synergraft valves were implanted in four male children (age 2.5-11 years) in the right ventricular outflow tract as a root. Two patients had a Ross operation and two had a homograft replacement. RESULTS: The cryopreserved Synergraft valves appeared macroscopically unremarkable at implantation. Recovery from surgery was uneventful and good valve function was demonstrated postoperatively. Three children died, two suddenly with severely degenerated Synergraft valves 6 weeks and 1 year after implantation. The third child died on the 7th day due to Synergraft rupture. Subsequently the fourth graft was explanted prophylactically 2 days after implantation. Macroscopically all four grafts showed severe inflammation starting on the outside (day 2 explant) leading to structural failure (day 7 explant) and severe degeneration of the leaflets and wall (6 weeks and 1 year explant). Histology demonstrated severe foreign body type reaction dominated by neutrophil granulocytes and macrophages in the early explants and a lymphocytic reaction at 1 year. In addition significant calcific deposits were demonstrated at all stages. Surprisingly pre-implant samples of the Synergraft revealed incomplete decellularization and calcific deposits. No cell repopulation of the porcine matrix occurred. CONCLUSION: The xenogenic collagen matrix of the Synergraft valve elicits a strong inflammatory response in humans which is non-specific early on and is followed by a lymphocyte response. Structural failure or rapid degeneration of the graft occurred within 1 year. Calcific deposits before implantation and incomplete decellularization may indicate manufacturing problems. The porcine Synergraft treated heart valves should not be implanted at this stage and has been stopped.

Animals↗

PubMed2000

Practical illustrations in tissue engineering: surgical considerations relevant to the implantation of osteoinductive devices.

This paper provides practical illustrations in the use of osteoinductive devices (biomaterial carriers coupled with osteoinductive morphogens) for bone tissue engineering. We discuss the considerations relative to the implantation of these devices that may induce tissues that are located outside the boundaries of the osteoinductive device as well as outside boundaries of the normal skeletal envelope. Five reports of osteoinductive devices generating such tissues are reviewed. Histologic and radiographic data from a sixth example are presented and compared with histologic and radiographic findings typical of two varieties of myositis ossificans. A theory is advanced that osteoinductive implants may induce ectopic tissues that resemble fibro-osseous pathologies. Finally characteristics of tissue-engineered bone graft substitutes that may contribute to development of these pathologies and device characteristics that may obviate these ectopic tissues are considered.

Animals↗

PubMed2002

[Mesenchymal stem cells--a new pathway for tissue engineering in reconstructive surgery].

INTRODUCTION: Mesenchymal stem cells (MSC) have the capacity to differentiate into chondrocytes with the synthesis of cartilage. This report presents the use of human adult bone marrow derived mesenchymal stem cells for tissue engineering of autologous cartilage grafts. METHODS: Human bone marrow aspirates were obtained from the iliac crest and fractionated on a Percoll gradient. The isolated hMSC were plated at 20 x 10 (6) cells per 100 mm (2) culture dish. After 21 days in culture at 37 degrees C with 5 % CO 2, the adherent multiplied MSC were trypsinized, counted, and tested for viability by trypan blue assay. The hMSCs were loaded into a sterile 15 ml polypropylene tube (0.5 Mio cells/ml) and centrifuged on the bottom of the tube at 500 g for 5 minutes. The MSC were cultivated for 3 weeks in vitro in a specific chondrogenetic medium composed of Dulbecco's Modified Eagles Medium-High Glucose supplemented with 10 ng/ml transforming growth factor-beta 1, 1 % ITS-Premix medium, 80 micro M ascorbic acid, and 100 nM dexamethasone. RESULTS: Histological and immunohistochemical studies performed after 3 weeks in three dimensional culture demonstrated the expression of cartilage specific collagen type II and X as well as proteoglycans. CONCLUSION: Human adult mesenchymal stem cells derived from bone marrow aspirates have the ability to differentiate into chondrocytes under specific culture conditions by growth factors. The use of adult mesenchymal stem cells may be a promising tool for tissue engineering of autologous cartilage grafts in reconstructive surgery in the future.

Adult↗

PubMed2004

Tissue engineering and regenerative medicine: concepts for clinical application.

Patients suffering from diseased and injured organs may be treated with transplanted organs. However, there is a severe shortage of donor organs that is worsening yearly given the aging population. Scientists in the field of regenerative medicine and tissue engineering apply the principles of cell transplantation, material science, and bioengineering to construct biological substitutes that will restore and maintain normal function in diseased and injured tissues. Therapeutic cloning, where the nucleus from a donor cell is transferred into an enucleated oocyte in order to extract pluripotent embryonic stem cells, offers a potentially limitless source of cells for tissue engineering applications. The stem cell field is also advancing rapidly, opening new options for therapy. This paper reviews recent advances that have occurred in regenerative medicine and describes applications of these new technologies that may offer novel therapies for patients with end-stage organ failure.

Animals↗

PubMed2006

Shear stress facilitates tissue-engineered odontogenesis.

Numerous studies have demonstrated the effect of shear stress on osteoblasts, but its effect on odontogenic cells has never been reported. In this study, we focused on the effect of shear stress on facilitating tissue-engineered odontogenesis by dissociated single cells. Cells were harvested from the porcine third molar tooth at the early stage of crown formation, and the isolated heterogeneous cells were seeded on a biodegradable polyglycolic acid fiber mesh. Then, cell-polymer constructs with and without exposure to shear stress were evaluated by in vitro and in vivo studies. In in vitro studies, the expression of both epithelial and mesenchymal odontogenic-related mRNAs was significantly enhanced by shear stress for 2 h. At 12 h after exposure to shear stress, the expression of amelogenin, bone sialoprotein and vimentin protein was significantly enhanced compared with that of control. Moreover, after 7 days, alkaline phosphatase activity exhibited a significant increase without any significant effect on cell proliferation in vitro. In vivo, enamel and dentin tissues formed after 15 weeks of in vivo implantation in constructs exposure to in vitro shear stress for 12 h. Such was not the case in controls. We concluded that shear stress facilitates odontogenic cell differentiation in vitro as well as the process of tooth tissue engineering in vivo.

Alkaline Phosphatase↗

PubMed2006

Tissue engineering of vascular conduits.

BACKGROUND: Autologous conduits are not available in up to 40 per cent of patients with arteriopathy who require coronary or lower limb revascularization, and access sites for renal dialysis may eventually become exhausted. Synthetic prostheses achieve a poor patency rate in small-calibre anastomoses. This review examines how vascular tissue engineering may be used to address these issues. METHODS: A Medline search was performed, using the keywords "vascular tissue engineering", "small diameter vascular conduit", "vascular cell biology", "biomechanics", "cell seeding" and "graft endothelialization". Key references were hand-searched for relevant papers. RESULTS AND CONCLUSION: In vitro and in vivo approaches are currently being used for guided cell repopulation of both biological and synthetic scaffolds. The major clinical problem has been extended culture time (approximately 6 weeks), which precludes their use in the acute setting. However, recent advances have led not only to improved patency rates for prostheses, but also to a potential reduction in culture time. In addition, increased mobilization of endothelial progenitor cells in the presence of ischaemic tissue may increase the autologous cell yield for scaffold reseeding with further reduction in culture time.

Bioartificial Organs↗