PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Pinus”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76Linked to original sources

Removal of Fe(II) ions from aqueous solution by Calabrian pine bark wastes.

The ability of Calabrian pine bark wastes (Pinus brutia Ten) for the removal of Fe(II) ions from aqueous solution at different concentrations and temperatures at a fixed pH was investigated. While the amounts of Fe(II) ions adsorbed onto the bark increased with increasing concentration, it increased slightly with increasing the temperature. Kinetics studies showed that adsorption process followed the first-order kinetic model as well as intra-particle diffusion kinetics. Adsorption isotherm followed both Langmuir and Freundlich models. And it was determined that the adsorption was favorable from a dimensionless factor, R(L). Furthermore, the thermodynamic parameters demonstrated that the removal of Fe(II) by the bark was a physical process.

Adsorption↗

Mechanical properties and decay resistance of wood-polymer composites prepared from fast growing species in Turkey.

Some mechanical properties of wood-polymer composites from maritime pine (Pinus pinaster Ait.) and poplar (Populus x. euramericana cv. I-214) wood were investigated. Three different monomers; styrene (ST), methyl methacrylate (MMA) and styrene/methyl methacrylate (ST/MMA) mixture were used in preparation of wood-polymer composites (WPCs). Full-loading (FL), half-loading (HL) and quarter-loading (QL) were used as polymer content levels. Untreated pine and pine-polymer composite samples were tested in compression strength parallel to grain and static bending strength. WPCs mechanical properties increased compared to untreated wood. The polymer had greater effect on the strengths of the ST/MMA treated pine than on the ST and MMA treated pine samples. Increasing of the mechanical properties should improve the structural competitiveness of WPCs made from fast growing-low density woods. Weight losses due to fungal attack for pine and poplar-polymer composites were also determined. Although polymers at full and half loading levels helped decreasing weight losses due to both fungi for each wood species, weight losses were still found to be higher.

Compressive Strength↗

Synthetic lanostane-type triterpenoids as inhibitors of DNA topoisomerase II.

DNA topoisomerase (Topo) II is one of the target enzymes for chemotherapeutic drug development. Lanostane-type triterpenoids with various functional groups (-Cl, -Br, -OMe, -CHO, -CN, -COOH, and -COOMe) at C-2 were synthesized from 3-oxolanost-9(11)-en-24S,25-diol (9) isolated from Pinus luchuensis and their inhibitory effects on Topo II activity and cytotoxic activities against A549 cells were examined. All the derivatives showed Topo II inhibitory effects with IC50 values ranging from 1.86 to 149.97 microM and cytotoxic activities with ED50 values ranging from 3.96 to 38.15 microM.

Antineoplastic Agents↗

A novel alpha-glucosidase inhibitor from pine bark.

Inhibitors of carbohydrate-hydrolysing enzymes play an important role for the treatment of diabetes. To our knowledge, a number of inhibitors such as, 1-deoxynojirimycin, acarbose and voglibose have been identified as a result of screening of secondary metabolites up to now. In this note, we report the inhibitory effect on carbohydrate hydrolysis of ethanol extracts from more than 1400 species of plants with the aim of identifying a potential antihyperglycemic drug. Pinus densiflora bark extracts showed the highest inhibition activity against several carbohydrate-hydrolysing enzymes.

Animals↗

Assessment of airborne heavy metal pollution by aboveground plant parts.

Italian stone pine (Pinus pinea L.) and oleander (Nerium oleander L.) leaves, bark and wood samples were collected at different sites around an industrial area (Huelva, SW Spain) and compared with samples of the same species from a background site. Samples were analysed with respect to the following pollutants: Al, Ba, Cr, Cu, Fe and Pb by ICP-AES. The suitability of different plant parts as biomonitors of pollution was investigated. In pine samples from the polluted sites the ratio of concentrations between bark and wood was high for Al, Ba, Cu and Fe, whereas no differences were found in samples from the unpolluted area. No differences were detected in oleander for the same ratio. In the oleander species, the ratio between leaves and wood concentration allowed to distinguish between control and polluted sites. The ratio of the concentration between leaves and wood was elevated for Al, Ba and Fe in pine samples from the polluted sites. The ratio of the concentration in bark or leaves to their concentration in wood might be useful to detect inorganic atmospheric pollutants.

Air Pollutants↗

Temporal trends and spatial distribution of PCDD, PCDF, and PCB in pine and spruce shoots.

In Germany, there is a lack of consistent and comparable data for the time dependent behaviour and spatial distribution of dioxin-like and indicator PCB in ambient air, deposition and plants. The aim of this study was to improve the data on PCDD/PCDF, dioxin-like PCB and non dioxin-like PCB in spruce and pine shoots from different locations and years by retrospective monitoring. The survey was conducted with archived samples of one-year old spruce shoots (Picea abies) and pine shoots (Pinus sylvestris) from the German environmental specimen bank. Two sets of samples from locations in urbanized areas in western and eastern Germany (Warndt and Duebener Heide Mitte, respectively) were investigated as time series. Additionally, spruce shoots from seven different rural locations sampled in the years 2000-2004 were analyzed in order to get an overview about the spatial distribution of PCB and PCDD/PCDF. The analytical results of the samples from the two urbanized areas clearly show that the atmospheric contamination with PCDD and PCDF has declined by about 75% between 1985 and 1997 at Warndt and about 40% between 1991 and 1997 at Duebener Heide. However, concentrations stayed virtually constant at both locations from 1997 to 2004 at a level of about 1 ng WHO-TEQ/kg dry matter (d.m.). Similarly, the investigation of spruce shoots from rural locations from 2000 to 2004 did not reveal a temporal trend at any site. PCDD/PCDF levels were between 0.1 and 1.0 ng WHO-TEQ/kg d.m. At the urbanized location Warndt the six indicator PCB as well as the 12 dioxin-like PCB according to WHO revealed a significant decline by more than 75% between 1985 and 1999. Thereafter, PCB levels stayed virtually constant. At the location Duebener Heide an overall decrease of PCB concentrations in pine shoots of about 60% was detected between 1991 and 2004. Spruce shoots from all locations showed a relevant contribution of dioxin-like PCB to the total WHO toxicity equivalent (PCDD/PCDF+PCB). In most samples, the contribution of dioxin-like PCB was between 21% and 41%. The TEQ contribution of PCB in the samples from three rural sites was higher and similar to the TEQ value of PCDD/PCDF. The investigated pine shoots from the urbanized site Duebener Heide showed a 15-28% contribution of dioxin-like PCB to total TEQ and thus lower than in spruce shoots from different locations. In all samples except one PCB 126 contributed to more than 80% to the PCB-TEQ.

Benzofurans↗

Water deficit stress induces different monoterpene and sesquiterpene emission changes in Mediterranean species. Relationship between terpene emissions and plant water potential.

The effects of water deficit stress and plant water potential (psi) on monoterpene and sesquiterpene leaf emissions from Rosmarinus officinalis, Pinus halepensis, Cistus albidus and Quercus coccifera were studied over 11 days of water withholding (from t(1) to t(11)), after substrates had achieved their field capacity (control pots: t(0)). Volatile compounds were sampled from the same twig per plant all throughout the study, using a dynamic bag enclosure system. Volatiles, collected in Tenax TA, were studied by means of GC-FID and GC-MS. Monoterpene emissions of water stressed plants (t(1)-t(11)) were either similar to those of control seedlings (R. officinalis and Q. coccifera) or higher (P. halepensis and C. albidus). By contrast, sesquiterpene emissions were strongly reduced or inhibited after four days of water withholding, particularly for R. officinalis, thus altering terpene emission composition. Despite the positive effect of water stress on leaf monoterpene emissions of P. halepensis and C. albidus, the significant correlation between these emissions and psi showed a slow decrease of these emissions over long term water deficit periods. This contrasted with the rapid decline of sesquiterpene emissions of R. officinalis according to lower values of psi. These results provide an overall picture of the different responses of monoterpene and sesquiterpene emissions to progressive water loss. They also reveal the utility of using psi for estimating some emission rates of some species according to drought conditions.

Cistus↗

Determination of optimum conditions for the analysis of volatile components in pine needles by double-shot pyrolysis-gas chromatography-mass spectrometry.

The optimum conditions for the analysis of the volatile organic components of pine needles from Pinus densiflora using double-shot pyrolysis-gas chromatography-mass spectrometry (DSP-GC-MS) were investigated with respect to thermal desorption temperature and duration of heating. A total of 41 compounds were identified using thermal desorption temperatures of 150 degrees C, 200 degrees C, 250 degrees C and 300 degrees C. Thermal decomposition products, which include acetol, acetic acid, furfurals and phenols, were observed only at thermal desorption temperatures exceeding 250 degrees C: they were not observed in the extract from a simultaneous distillation extraction (SDE) method. Heating times of 1 s, 6 s, 30 s, 150 s and 300 s were investigated at the thermal desorption temperature of 200 degrees C, whence it was found that thermal decomposition products were produced only at heating times over 30 s. The optimum pyrolyzer conditions for the analysis of pine needles using DSP-GC-MS is 200 degrees C for 6 s. Under these conditions, this method gives comparable results to the SDE method.

Gas Chromatography-Mass Spectrometry↗

Analysis of polycyclic aromatic hydrocarbons in pine needles by gas chromatography-mass spectrometry: comparison of different extraction and clean-up procedures.

Three extraction methodologies (Soxhlet, ultrasonic and pressurized liquid extraction) and several clean-up procedures (Florisil, silica and alumina in cartridges or glass column format) were tested and compared to extract 16 US Environmental Protection Agency (EPA) polycyclic aromatic hydrocarbons (PAHs) from Pinus pinea L. needles. Quantification was done by gas chromatography with mass spectrometry, by internal standard method using five deuterated PAH surrogate standards. Among the several extraction and clean-up procedures tested, ultrasonic extraction followed by alumina cartridge clean-up was the preferred method, yielding recoveries between 72 and 100% and limits of detection between 0.22 and 0.71 ng/g dry weight. The performance of the method was tested to determine PAHs in naturally contaminated samples.

Chemical Fractionation↗

Enantiomeric monoterpene emissions from natural and damaged Scots pine in a boreal coniferous forest measured using solid-phase microextraction and gas chromatography/mass spectrometry.

In order to develop a valuable method for accurate screening of biogenic emissions from undisturbed living plants or for plant-insect interactions, solid-phase microextraction (SPME) has been combined with dynamic branch enclosure cuvettes and enantioselective GC/MS. The study was conducted at Hyytiälä forest station, Finland within a boreal coniferous forest dominated by Scots pine (Pinus sylvestris). The SPME method was optimized for monoterpenes by testing three fibre coatings: polydimethylsiloxane (PDMS), polydimethylsiloxane/divinylbenzene (PDMS/DVB) and carbowax/divinylbenzene (CW/DVB) and determining the optimum exposure time. The PDMS/DVB fibre was found to be most suitable and was used to characterize emissions of P. sylvestris enclosed in dynamic branch enclosure cuvettes by exposure for 1 min followed by desorption and separation on a beta-cyclodextrin column installed in the GC/MS oven. Dynamic cuvette measurements have been compared to static headspace SPME samples of the emission of detached needles from the same tree species and a portable dynamic air sampler (PDAS)-SPME for sampling the ambient air around the same trees. The method developed has allowed an accurate characterization of the gaseous emission of P. sylvestris and the identification of 17 isoprenoids comprising chiral and achiral monoterpenes. Two chemotypes of Scots pine can be differentiated through their emission of (+)-delta-3-carene. While SPME-dynamic cuvette, portable dynamic sampler and absorbent results agreed well, significant differences in enantiomeric ratios were observed in natural emissions and those of damaged leaves. Therefore, in enantioselective studies of plant-insect and/or plant-plant interactions, the two enantiomers of a given monoterpene should be treated as two separate substances.

Finland↗

[Palaeostructures of vegetation at the upper limit of forests in the inner French Alps].

The comparison of six pollen diagrams from French Alps allows us to reconstruct the past changes of vegetation structure at the upper limit of Subalpine range. Dense populations of Pinus cembra developed between 6500 and 2400 cal. BP, both in the southern Alps and the northern ones. Southern Alps seem however to be characterised by higher altitudinal limits, as shown by the past development of fir forests at 2080 m a.s.l. in the Ubaye valley. This study highlights the importance of taking in account local parameters in regional or continental reviews.

Altitude↗

Forest health status in the Carpathian Mountains over the period 1997-2001.

The results of forest health status assessments in the Carpathian Mountains from the monitoring networks developed by the European Union Scheme on the Protection of Forest Against Atmospheric Pollution (EU Scheme) and International Co-operative Programme on Assessment and Monitoring of Air Pollution Effects on Forests (ICP-Forests), have led to a better understanding of the impact of air pollution and other stressors on forests at the regional scale. During the period 1997-2001, forests in the Carpathian Mountains were severely affected by air pollution and natural stresses with 29.7-34.9% of the trees included in defoliation classes 2-4. The broadleaves were slightly healthier than the conifers, and European beech (Fagus sylvatica) was the least affected species. Norway spruce (Picea abies) has poor health status, with 42.9-46.6% of the trees damaged (2-4% defoliation classes). Silver fir (Abies alba) damage was also high, with 46.0-50.9% in defoliation classes 2-4. Pines (primarily Pinus sylvestris) were the least affected of the conifers, with 24.9-33.8% in defoliation classes 2-4. The results from the transnational networks (16 x 16 km) show that the Carpathian forests are slightly more damaged than the average for the entire Europe. The correlative studies performed in individual European countries show the relationships between air pollution stressors with trends in defoliation and a possible effect of natural stresses at each site. More specific, effects of tree age, drought, ozone and acid deposition critical level exceedances were demonstrated to affect crown condition.

Abies↗

The use of the barbell cluster ANOVA design for the assessment of environmental pollution: a case study, Wigierski National Park, NE Poland.

This report presents an assessment of chemical variability in natural ecosystems of Wigierski National Park (NE Poland) derived from the calculation of geochemical baselines using a barbell cluster ANOVA design. This method enabled us to obtain statistically valid information with a minimum number of samples collected. Results of summary statistics are presented for elemental concentrations in the soil horizons-O (Ol + Ofh), -A and -B, 1- and 2-year old Pinus sylvestris L. (Scots pine) needles, pine bark and Hypogymnia physodes (L.) Nyl. (lichen) thalli, as well as pH and TOC. The scope of this study also encompassed S and C stable isotope determinations and SEM examinations on Scots pine needles. The variability for S and trace metals in soils and plant bioindicators is primarily governed by parent material lithology and to a lesser extent by anthropogenic factors. This fact enabled us to study concentrations that are close to regional background levels.

Analysis of Variance↗

Long-term exposure to enhanced UV-B radiation has no significant effects on growth or secondary compounds of outdoor-grown Scots pine and Norway spruce seedlings.

The effects of long-term enhanced UV-B radiation on growth and secondary compounds of two conifer species were studied in an outdoor experiment. Scots pine (Pinus sylvestris) seedlings were exposed for two growing seasons and Norway spruce (Picea abies) seedlings for three growing seasons to supplemental UV-B radiation, corresponding to a 30% increase in ambient UV-B radiation. The experiment also included appropriate controls for ambient and increased UV-A radiation. Enhanced UV-B did not affect the growth of the conifer seedlings. In addition, neither the concentrations of terpenes and phenolics in the needles nor the concentrations of terpenes in the wood were affected. However, in the UV-A control treatment the concentrations of diterpenes in the wood of Scots pine decreased significantly compared to the ambient control. Apparently, a small increase in UV-B radiation has no significant effects on the secondary compounds and growth of Scots pine and Norway spruce seedlings.

Environmental Monitoring↗

Simulation of stomatal conductance for Aleppo pine to estimate its ozone uptake.

The data from a previous experiment carried out in open-top chambers to assess the effects of ozone (O3) exposure on growth and physiology of Aleppo pine (Pinus halepensis Mill.) were re-assessed to test the performance of the EMEP O3 stomatal conductance model used to estimate tree O3 uptake at a European scale. Aleppo pine seedlings were exposed during three consecutive years to three different O3 treatments: charcoal filtered air, non-filtered air and non-filtered air supplemented with 40 nl l(-1). The results of the model using the default parameterisation already published for Mediterranean conifers showed a poor performance when compared to measured data. Therefore, modifications of g(max), f(min), and new f(VPD), f(temp) and f(phen) functions were developed according to the observed data. This re-parameterisation resulted in a significant improvement of the performance of the model when compared to its original version.

Environmental Exposure↗

Spatial relationships between nitrogen status and pitch canker disease in slash pine planted adjacent to a poultry operation.

Pitch canker disease (Fusarium circinatum Nirenberg & O'Donnell) causes serious shoot dieback, reduced growth and mortality in pines found in the southern and western USA, and has been linked to nutrient imbalances. Poultry houses with forced-air ventilation systems produce nitrogen (N) emissions. This study analyzed spatial correlations between pitch canker disease and foliar, forest floor, soil, and throughfall N in a slash pine (Pinus elliottii var. elliottii Engelm.) plantation adjacent to a poultry operation in north Florida, USA. Tissue and throughfall N concentrations were highest near the poultry houses and remained elevated for 400 m. Disease incidence ranged from 57-71% near the poultry houses and was spatially correlated with N levels. Similarly, stem mortality ranged from 41-53% in the most heavily impacted area, and declined to 0-9% at distances greater than 400 m. These results suggest that nutritional processes exacerbate changes in disease susceptibility and expression in slash pine.

Ammonia↗

Degradability of dissolved soil organic carbon and nitrogen in relation to tree species.

The degradability and chemical characteristics of water-extractable dissolved organic carbon (DOC) and nitrogen (DON) from the humus layer of silver birch (Betula pendula Roth), Norway spruce (Picea abies (L.) Karst.) and Scots pine (Pinus sylvestris L.) stands were compared in short-term incubation of soil solutions. For all extracts the degradation of DOC and DON was low (12-17% loss) and increased in the order: birch, spruce and pine. In the humus layer under pine a relatively larger pool of rapidly degrading dissolved soil organic matter (DOM) was indicated by the [3H]thymidine incorporation technique, which measures the availability of DOM to bacteria. The degradation of DOC was explained by a decrease in the hydrophilic fraction. For DON, however, both the hydrophilic and hydrophobic fractions tended to decrease during incubation. No major differences in concentrations of hydrophilic and hydrophobic fractions were detected between tree species. Molecular size distribution of DOC and DON, however, revealed slight initial differences between birch and conifers as well as a change in birch extract during incubation. The depletion of very rapidly degrading fractions (e.g., root exudates and compounds from the litter) may explain the low degradability of DOM in the humus layer under birch.

Analysis of Variance↗

Presence of Nitrosospira cluster 2 bacteria corresponds to N transformation rates in nine acid Scots pine forest soils.

The relation between environmental factors and the presence of ammonia-oxidising bacteria (AOB), and its consequences for the N transformation rates were investigated in nine Scots pine (Pinus sylvestris L.) forest soils. In general, the diversity in AOB appears to be strikingly low compared to other ecosystems. Nitrosospira cluster 2, as determined by temporal temperature gradient electrophoresis and sequencing, was the only sequence cluster detected in the five soils with high nitrification rates. In the four soils with low nitrification rates, AOB-like sequences could not be detected. Differences in nitrification rates between the forest soils correlated to soil C/N ratio (or total N) and atmospheric N deposition.

Ammonia↗