SEARCH · PubMed Health

Results for “Process optimization”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76Linked to original sources

PubMed2004

A novel pain management strategy for combat casualty care.

STUDY OBJECTIVE: Pain control in trauma patients should be an integral part of the continuum of care, beginning at the scene with out-of-hospital trauma management, sustained through the evacuation process, and optimized during hospitalization. This study evaluates the effectiveness of a novel application of a pain control medication, currently indicated for the management of chronic and breakthrough cancer pain, in the reduction of acute pain for wounded Special Operations soldiers in an austere combat environment. METHODS: Doses (1,600 microg) of oral transmucosal fentanyl citrate were administered by medical personnel during missions executed in support of Operation Iraqi Freedom from March 3, 2003, to May 3, 2003. Hemodynamically stable casualties presenting with isolated, uncomplicated orthopedic injuries or extremity wounds who would not have otherwise required an intravenous catheter were eligible for treatment and evaluation. Pretreatment, 15-minute posttreatment, and 5-hour posttreatment pain intensities were quantified by the verbal 0-to-10 numeric rating scale. RESULTS: A total of 22 patients, aged 21 to 37 years, met the study criterion. The mean difference in verbal pain scores (5.77; 95% confidence interval [CI] 5.18 to 6.37) was found to be statistically significant between the mean pain rating at 0 minutes and the rating at 15 minutes. However, the mean difference (0.39; 95% CI -0.18 to 0.96) was not statistically significant between 15 minutes and 5 hours, indicating the sustained action of the intervention without the need for redosing. One patient experienced an episode of hypoventilation that resolved readily with administration of naloxone. Other documented adverse effects were minor and included pruritus (22.7%), nausea (13.6%), emesis (9.1%), and lightheadedness (9.1%). CONCLUSION: Oral transmucosal fentanyl citrate can provide an alternative means of delivering effective, rapid-onset, and noninvasive pain management in an out-of-hospital, combat, or austere environment.

Administration, Oral↗

PubMedDate not supplied

Graft engineering for allogeneic haploidentical stem cell transplantation.

Haploidentical stem cell transplantation has became a clinical reality in the last 10 years as it provides the chance of transplant for about 50% of patients with hematological malignancies who do not have a matched related or unrelated donor. Proper graft preparation for this type of transplant is crucial and this paper analyses our work over the past decade in the search for the optimal graft processing procedure moving from E-rosetting and soybean agglutination, through a combination of negative or positive selection of hematopoietic stem cells to the current method of one-step positive selection. In preparing a graft for haploidentical transplant, three essential requisites must be met. It must contain (1) a megadose (>10 x 10(6) x kg recipient b.w.) of hematopoietic stem cells to overcome the HLA histocompatibility barrier; (2) very few T-lymphocytes (CD3+ cells < 3 x 10(4)/kg recipient b.w.) to prevent severe acute and chronic graft-versus-host disease (GvHD); (3) very few B-lymphocytes to prevent Epstein-Barr virus-related lymphoproliferative disorders. With current graft processing technologies based on positive selection of hematopoietic stem cells, these requirements can be met. A 70-80% hematopoietic stem cell recovery ensures the target megadose is achieved in over 70% of cases with a T-cell depletion of more than 4 logs and a B-cell depletion of over 3 logs. Progress in graft processing has ensured primary, sustained engraftment rates of over 90% and has significantly reduced the incidence of severe acute GvHD and EBV-related lymphoproliferative disorders. Modern time-saving automated graft processing devices ensure reproducibility, reliability, and biological safety, which make widespread application of the haploidentical transplant currently feasible.

Cell Separation↗

PubMed2005

Combined sugar yields for dilute sulfuric acid pretreatment of corn stover followed by enzymatic hydrolysis of the remaining solids.

A number of previous studies determined dilute acid pretreatment conditions that maximize xylose yields from pretreatment or glucose yields from subsequent digestion of the pretreated cellulose, but our emphasis was on identifying conditions to realize the highest yields of both sugars from both stages. Thus, individual xylose and glucose yields are reported as a percentage of the total potential yield of both sugars over a range of sulfuric acid concentrations of 0.22%, 0.49% and 0.98% w/w at 140, 160, 180 and 200 degrees C. Up to 15% of the total potential sugar in the substrate could be released as glucose during pretreatment and between 15% and 90+% of the xylose remaining in the solid residue could be recovered in subsequent enzymatic hydrolysis, depending on the enzyme loading. Glucose yields increased from as high as 56% of total maximum potential glucose plus xylose for just enzymatic digestion to 60% when glucose released in pretreatment was included. Xylose yields similarly increased from as high as 34% of total potential sugars for pretreatment alone to between 35% and 37% when credit was taken for xylose released in digestion. Yields were shown to be much lower if no acid was used. Conditions that maximized individual sugar yields were often not the same as those that maximized total sugar yields, demonstrating the importance of clearly defining pretreatment goals when optimizing the process. Overall, up to about 92.5% of the total sugars originally available in the corn stover used could be recovered for coupled dilute acid pretreatment and enzymatic hydrolysis. These results also suggest that enhanced hemicellulase activity could further improve xylose yields, particularly for low cellulase loadings.

Catalysis↗

PubMed2005

Production of scleroglucan from Sclerotium rolfsii MTCC 2156.

Scleroglucan, a neutral homopolysaccaride consisting of a linear chain of beta-D-(1-3)-glucopyranosyl and beta-D-(1-6)-glucopyranosyl groups, was produced by pure culture fermentation from Sclerotium rolfsii MTCC 2156 by submerged culture. Fermentation process was optimized in two steps. In the first step, one-factor-at-a-time method was used to investigate the effects of medium constituents such as carbon and nitrogen sources. In the second step, concentration of medium components was optimized using an L16-orthogonal array method. In all, 10 different carbon sources and eight different nitrogen sources were evaluated. Maximum yield of 16.58 g/l was obtained in a medium containing sucrose as a carbon source and sodium nitrate and yeast extract as nitrogen source.

Basidiomycota↗

PubMed2006

Development of a plasma panel test for detection of human myocardial proteins by capillary immunoassay.

A chemiluminescence immunoassay for the detection of four heart marker proteins: myoglobin, creatine kinase mb [CKmb], troponin I [TnI], and fatty acid-binding protein [FABP], was designed. The immunoassay was based on enzyme-linked immunosorbent assay [ELISA] and antibodies immobilized in glass capillaries pre-treated with 3-aminopropyltriethoxysilane. The protein bound to the antibody was detected by using an anti-protein-horseradish peroxidase [HRP] conjugate. The reaction of the HRP with luminal and hydrogen peroxide-based substrate generated the chemiluminescence and a photodiode detector was used to measure the light intensity. The same assay protocol was used to detect all four proteins. Ultrasound waves were used to improve the silanization of glass and the antibody immobilization process. The optimization of the duration and intensity of the ultrasound was performed for the myoglobin assay. Ultrasound improved the silanization procedure and the capillaries gave an approximately 2.5 times greater ELISA response. Ultrasound also improved the sensitivity by approximately 100% when monoclonal antibody was immobilized on a glass capillary. Calibration curves corresponding to analyte concentrations ranging from 2.4 to 2400 ng/ml in plasma samples were recorded. The detection limits were in the region of 1.2 myoglobin, 0.6 CKmb, 5.6 TnI, and 4 ng/ml FABP in plasma with a coefficient of variation of 3-9.9%.

Antibodies↗

PubMed2005

An evaluation of automated in silico ligand docking of amino acid ligands to Family C G-protein coupled receptors.

Family C G-protein coupled receptors (GPCRs) consist of the metabotropic glutamate receptors (mGluRs), the calcium-sensing receptor (CaSR), the T1R taste receptors, the GABA(B) receptor, the V2R pheromone receptors, and several chemosensory receptors. A common feature of Family C receptors is the presence of an amino acid binding pocket. The objective of this study was to evaluate the ability of the automatic docking program FlexX to predict the favored amino acid ligand at several Family C GPCRs. The docking process was optimized using the crystal structure of mGluR1 and the 20 amino acids were docked into homology models of the CaSR, the 5.24 chemosensory receptor, and the GPRC6A amino acid receptor. Under optimized docking conditions, glutamate was docked in the binding pocket of mGluR1 with a root mean square deviation of 1.56 angstroms from the co-crystallized glutamate structure and was ranked as the best ligand with a significantly better FlexX score compared to all other amino acids. Ligand docking to a homology model of the 5.24 receptor gave generally correct predictions of the favored amino acids, while the results obtained with models of GPRC6A and the CaSR showed that some of the favored amino acids at these receptors were correctly predicted, while a few other top scoring amino acids appeared to be false positives. We conclude that with certain caveats, FlexX can be successfully used to predict preferred ligands at Family C GPCRs.

Amino Acids↗

PubMed2005

An anaerobic bioreactor allows the efficient degradation of HCH isomers in soil slurry.

The insecticide gamma-hexachlorocyclohexane (gamma-HCH or lindane), which has been extensively used for agricultural and medical purposes, presents high persistence and toxicity to the environment and low solubility. This study intends to assess the efficiency of an anaerobic reactor to degrade HCH isomers contained in soil slurry cultures. This study was developed in two phases: experiments in flasks to optimize the process parameters, and assessment of the slurry process in the anaerobic slurry reactor operated for an approximate period of a year. The influence of different environmental conditions was evaluated: the HCH concentration (25-100 mg HCH kg-1), the type of substrate (volatile fatty acids or starch), the sludge concentration (2-8 g VSS l-1) and the replacement of spiked soil to simulate a fed-batch operation (10-50%). The best results were obtained when the reactor was operated with a sludge concentration of 8 g VSS l-1, starch concentration of 2 g COD l-1 and soil replacements of 10-20%. Under these conditions, alpha- and gamma-HCH were completely degraded after 10d while nearly 90% beta- and delta-HCH were removed only after 50 d. According to the obtained results related to the total degradation of the HCH isomers and the degradation rates, especially high for alpha- and gamma-HCH, the anaerobic slurry reactor appears to be a good alternative for the degradation of the HCH isomers present in polluted soil.

Anaerobiosis↗

PubMed2005

Predictive modeling of protein adsorption along the bed height by taking into account the axial nonuniform liquid dispersion and particle classification in expanded beds.

Expanded bed adsorption (EBA) is a special chromatography technique with perfect classification of adsorbent particles in the column, thus the performance of protein adsorption in expanded beds is particular, obviously nonuniform and complex along the column. Detailed description of the complex adsorption kinetics of proteins in expanded bed is essential for better analyzing of adsorptive mechanisms, the design of chromatographic processes and the optimization of operation parameters of EBA processes. In this work, a theoretical model for the prediction of protein adsorption kinetics in expanded beds was developed by taking into account the classified distribution of adsorbent particles along the bed height, the nonuniform behaviors of axial liquid dispersion, the axial variation of local bed voidage as well as the axial changes of target component mass transfer. The model was solved using the implicit finite difference scheme combining with the orthogonal collocation method, and then applied to predict the breakthrough behaviors of bovine serum albumin (BSA) on Streamline DEAE and lysozyme on Streamline SP along the bed height in expanded beds under various conditions. In addition, the experiments of front adsorption of BSA on Streamline DEAE at different axial column positions were carried out to reveal the adsorption kinetics of BSA along the bed height in a 20 mm I.D. expanded bed, and the influences of liquid velocity and feed concentration on the breakthrough behaviors were also analyzed. The breakthrough behaviors predicted by the present model were compared with the experimental data obtained in this work and in the literature published. The agreement between the prediction and the experimental breakthrough curves is satisfied.

Adsorption↗

PubMed2005

Development and application of a sol-gel immunosorbent-based method for the determination of isoproturon in surface water.

An immunosorbent was fabricated by encapsulation of monoclonal anti-isoproturon antibodies in sol-gel matrix. The immunosorbent-based loading, rinsing and eluting processes were optimized. Based on these optimizations, the sol-gel immunosorbent (SG-IS) selectively extracted isoproturon from an artificial mixture of 68 pesticides. In addition to this high selectivity, the SG-IS proved to be reusable. The SG-IS was combined with liquid chromatography-tandem mass spectrometry (LC-MS-MS) to determine isoproturon in surface water, and the linear range was up to 2.2 microg/l with correlation coefficient higher than 0.99 and relative standard deviation (RSD) lower than 5% (n=8). The limit of quantitation (LOQ) for 25-ml surface water sample was 5 ng/l.

Calibration↗

PubMed2006

Sample pretreatment method for the determination of polychlorinated biphenyls in bird livers using ultrasonic extraction followed by headspace solid-phase microextraction and gas chromatography-mass spectrometry.

A simple and reliable sample methodology based on simultaneous ultrasonic extraction, sulfuric acid clean-up and headspace solid-phase microextraction (SPME)-gas chromatography-mass spectrometry has been developed as an advantageous analytical tool for the determination of seven polychlorinated biphenyl congeners in bird livers at low levels. The influence of several parameters on the efficiency of the proposed method was systematically investigated. The clean-up efficiency of sulfuric acid treatment was tested and compared with those of column chromatography (Flosiril, silica gel and alumina) and solid-phase extraction (SPE) (Supelclean ENVI-Carb cartridge) procedures. The use of sulfuric acid in the clean-up step prior to headspace solid-phase microextraction analysis allows the removal of interfering matrix compounds present in the liver extracts that would otherwise cause severe ionization suppression of the polychlorinated biphenyls (PCBs) during the ionization process. The optimized method had good linearity (R2>0.99) over the range studied (5-500 ng/g wet weight) and showed satisfactory level of precision, with RSD values lower than 10.6%. The obtained relative recoveries ranged between 63 and 94%. The limits of detection (0.06-0.63 ng/g wet weight) were low enough to check for harmful levels of polychlorinated biphenyls in biological samples, and were well below most of the restrictive limits established by European Union regulations. The method was found to be reliable under the operational conditions proposed and was applied successfully to the analysis of individual polychlorinated biphenyls in liver tissues. The results obtained from five bird species from Greece revealed the presence of the target compounds in all samples analyzed, at levels ranging between 0.54 and 39.45 ng/g wet weight.

Animals↗

PubMed2006

Preparation and characterization of uniform-sized chitosan microspheres containing insulin by membrane emulsification and a two-step solidification process.

Chitosan microsphere has important application in controlled release of protein and peptide drug, because it shows excellent mucoadhesive and permeation enhancing effect across the biological surfaces. In the conventional preparation methods of chitosan microsphere, the W/O emulsion was usually prepared by mechanical stirring method, and then the droplets were solidified by glutaraldehyde. There existed limitation and shortage such as broad size distribution, de-activity of bio-drug and difficulty in drug release because protein and peptide drug have the same amino group as chitosan. In this study, we established a method to prepare uniform-sized microsphere, and solve above problems by combining a special membrane emulsification technique and a step-wise crosslinking method. That is, the chitosan/acetic acid aqueous solution was pressed through the uniform pores of a porous glass membrane into a paraffin/petroleum ether mixture containing PO-500 emulsifier, to form a W/O emulsion with uniform droplet size. Then, the uniform droplets were solidified by a two-step crosslinking method. At the first step, tripolyphosphate (TPP) solution was dropped gradually in the emulsion, TPP diffused into the droplet to crosslink chitosan by an ionic linkage, generating a microgel. At the second step, an adequate amount of glutaraldehyde was added. The solidification conditions of the two-step process were optimized by investigating the effects of solidification conditions on morphology of microspheres, encapsulation efficiency (EE), drug activity and release profile in vitro. The suitable preparative conditions were determined as follows: pH value of aqueous phase and TPP solution was 3.5-4.0, the molar ratio of amino group of chitosan to aldehyde group of glutaraldehyde was 1:1 and the crosslinking time of glutaraldehyde was 60 min.

Biocompatible Materials↗

PubMed2005

Osmotic shock: a mechanosensitive channel blocker can prevent release of cytoplasmic but not periplasmic proteins.

When over-expressed in the cytoplasm of Escherichia coli, carboxylesterase Est55 of Geobacillus stearothermophilus was found to be released from cells upon osmotic shock. Comparing two osmotic shock protocols showed that release of Est55 was abolished in the absence of mechanosensitive channel MscL by one method but not the other. The discrepancy extended to several previously reported cytoplasmic proteins released by osmotic shock, including: EF-Tu, thioredoxin, and DnaK in E. coli. Stepwise analyses of parameters between these two protocols revealed that the use of mechanical pipetting instead of gentle dilution of cells prior to exposure to hypotonic solution abolished the effect of MscL. Furthermore, while this phenomenon of release of certain cytoplasmic proteins was sustained in all three wild type strains of E. coli, presence of gadolinium was able to serve as an MscL channel blocker and prevented release of Est55 and EF-Tu in the process. An optimized protocol of osmotic shock was developed from this study to provide a more reliable assessment of location of proteins in E. coli. This method allowed release of authentic periplasmic MalE and beta-lactamase proteins comparable to that by EDTA-lysozyme treatment.

Biological Transport↗

PubMed2004

The role of biopharmaceutics in the development of a clinical nanoparticle formulation of MK-0869: a Beagle dog model predicts improved bioavailability and diminished food effect on absorption in human.

MK-0869 (aprepitant), a potent substance P antagonist, is the active ingredient of EMEND which has recently been approved by the FDA for the prevention of chemotherapy-induced nausea and vomiting. Early clinical tablet formulations of MK-0869 showed significant food effects on absorption, suggesting that formulation could have a significant role in improving bioavailability. A Beagle dog model was developed in an effort to guide novel formulation development. Using the suspension of the micronized bulk drug used for the tablet formulations, the food effect on absorption was confirmed in the dog at a similar magnitude to that observed in humans. Further dog studies demonstrated a clear correlation between particle size and in vivo exposures, with the nanoparticle (NanoCrystal) colloidal dispersion formulation providing the highest exposure, suggesting dissolution-limited absorption. The NanoCrystal dispersion also eliminated the food effect on oral absorption in the dog at a dose of 2mg/kg. Regional absorption studies using triport dogs indicated that the absorption of MK-0869 was limited to the upper gastrointestinal tract. These results provided strong evidence that the large increase in surface areas of the drug nanoparticles could overcome the narrow absorption window and lead to rapid in vivo dissolution, fast absorption, and increased bioavailability. In addition, the dog model was used for optimizing formulation processes in which the nanoparticles were incorporated into solid dosage forms, and for selecting excipients to effectively re-disperse the nanoparticles from the dosage units. The human pharmacokinetic data using the nanoparticle formulation showed excellent correlations with those generated in the dog.

Absorption↗

PubMed2006

Freeze-drying of nanocapsules: impact of annealing on the drying process.

Freeze-drying process was recently applied to improve the long-term storage stability of nanocapsules. Thermal treatment by annealing is an interesting process to optimize a freeze-drying cycle of these colloidal vectors. The objective of this paper is to investigate the impact of annealing on primary and secondary drying characteristics and on nanocapsules (NC) properties. Nanocapsules were prepared from poly-epsilon-caprolactone (PCL) biodegradable polymer and stabilized by polyvinyl alcohol (PVA), and then freeze-dried with two cryoprotectants: sucrose and poly vinyl pyrrolidone (PVP). Freeze-dried nanocapsules were characterized by size measurement and transmission electron microscopy after reconstitution. The effect of annealing on the kinetics of sublimation, on the mass transfer resistance and on the porosity of the freeze-dried product has been studied in the case of PVP. Finally, the effect of annealing on the kinetic of secondary drying was studied and the results were coupled with the isotherm of sorption. Results showed that PCL nanocapsules could be freeze-dried without any modification of their properties in presence of the two cryoprotectants used. Annealing of nanocapsules suspensions could accelerate the sublimation rate without any modification of nanocapsules size in the case of the two studied cryoprotectants. Such improvement could be explained by the increase of ice crystals size after annealing and by the diminution of mass transfer resistance by the dried layer. The acceleration of sublimation rate seems to depend on the temperature of annealing. The annealing of sucrose solution slows down the secondary drying kinetic whereas no effect is observed in the case of PVP.

Capsules↗

PubMed2005

Influence of induction and operation mode on recombinant rhamnulose 1-phosphate aldolase production by Escherichia coli using the T5 promoter.

Fed-batch culture techniques were employed to grow Escherichia coli at high-cell densities for the intracellular production of a recombinant rhamnulose 1-phosphate aldolase (RhuA) under the transcriptional control of the strong promoter T5, using a commercially available expression system (E. coli strain M15 and plasmid vector pQE40). A predetermined exponential feeding strategy at constant specific growth rate was selected to maintain carbon source limited growth using a defined medium. Growth rates below 0.36 h(-1) did not cause a severe formation of acetic acid while cell concentration increased exponentially up to 95 g(biomass)l(-1). The intrinsic biomass-substrate yield (gamma(X/S) = 0.48 gg(-1)) and the maintenance coefficient (mS = 0.10 g(substrate)g(biomass)(-1)h(-1)) were calculated from fed-batch growths at different specific growth rates. These values have been employed to determinate the addition profile during the fed-batch growth until IPTG induction, reaching a specific RhuA production levels of 565 AU g(biomass)(-1) which was lower than in batch (1250 AU g(biomass)(-1)). An inverse correlation between volumetric IPTG concentration and specific RhuA activity was found. A correlation between the ratio biomass/OD(600 nm) and the quantity of recombinant protein produced was found. Finally, the proposed process, after optimization of the IPTG concentration, led to significant increase in enzyme concentration and volumetric productivity compared to batch mode (2680 and 1338%, respectively).

Aldehyde-Lyases↗

PubMed2005

Assessing the effect of latex particle size and distribution on the rheological and adhesive properties of model waterborne acrylic pressure-sensitive adhesives films.

The adhesive and rheological properties of model acrylic pressure-sensitive adhesive (PSA) films prepared from high solid emulsions with different particle sizes and distributions have been investigated with a customized probe tack apparatus. For each emulsion, the monomer composition and gel content were kept constant but different average particle sizes and distributions were used. Adhesive films 100 microm thick were then prepared from these emulsions and their rheological properties in the linear regime and adhesive properties were systematically characterized. Surprisingly, both the rheological and adhesive properties were found to be very dependent on the initial latex particle size distribution. A series of experiments were carried out to assess the adhesive properties of films made from blends of small- and large-particle-size latexes. Using the probe tack test, a maximum in adhesion energy of the dry films was found for 60% of small particles in the blend, a composition clearly different from that giving a minimum viscosity of the latex implying that optimizing for properties may not be equivalent to optimizing for processing in these adhesive applications. Finally, the adhesive properties of two multimodal latexes with different particle size distributions were investigated. Both gave significantly higher adhesion energies and clear evidence of a fibrillar detachment process. This important result suggests that the spatial distribution of gel domains in the dry film and the molecular connectivity between those gel domains also play an important role in controlling its adhesive properties.

Journal Article↗

PubMed2005

A new route to the formation of biomimetic phosphate assemblies on gold: synthesis and characterization.

A biomimetic model system based on long-chain alkanethiols tailored with serine, threonine and tyrosine side-chain groups is created as a platform for the study of phosphorylated amino acids. The phosphorylated analogues are synthesized with protective tert-butyl groups that after assembly on thin polycrystalline gold films are removed in an acidic deprotection solution to form the corresponding phosphate self-assembled monolayers (SAMs). The SAMs are thoroughly characterized with null ellipsometry, contact angle goniometry, infrared reflection-absorption spectroscopy and X-ray photoelectron spectroscopy. The assembly and the subsequent deprotection process are optimized with respect to molecular orientation and chain conformation by varying the incubation time and the exposure time to the deprotection solution. The high quality of the generated SAMs suggests that the present assembly/deprotection approach is an attractive alternative when traditional synthetic routes become demanding because of solubility problems.

Amino Acids↗

PubMed2006

Sorption potential of Moringa oleifera pods for the removal of organic pollutants from aqueous solutions.

Moringa oleifera pods Lamarck (Drumstick or Horseradish) is a multipurpose medium or small size tree from sub-Himalayan regions of north-west India and indigenous to many parts of Asia, Africa, South America, and in the Pacific and Caribbean Islands. Its pods (MOP) have been employed as an inexpensive and effective sorbent for the removal of organics, i.e., benzene, toluene, ethylbenzene and cumene (BTEC) from aqueous solutions using HPLC method. Effect of different parameters, i.e., sorbent dose 0.05-0.8g, 25cm(-3) agitation time 5-120min, pH 1-10, temperature 283-308K and concentration of sorbate (1.3-13)x10(-3), (1.1-11)x10(-3), (0.9-9)x10(-3), (0.8-8)x10(-3)moldm(-3), on the sorption potential of MOP for BTEC have been investigated. The pore area and average pore diameter of the MOP by BET method using nitrogen as a standard are calculated to be 28.06+/-0.8m(2)g(-1) and 86.2+/-1.3nm respectively. Freundlich, Langumir and Dubinin-Radushkevich (D-R) sorption isotherms were employed to evaluate the sorption capacity of MOP. Sorption capacities of BTEC onto MOP have been found to be 46+/-10, 84+/-9, 101+/-4, 106+/-32mmolg(-1) by Freundlich, 8+/-0.1, 9+/-0.1, 10+/-0.3, 9+/-0.1mmolg(-1) by Langumir and 15+/-1, 21+/-1, 23+/-2, 22+/-3mmolg(-1) by D-R isotherms respectively, from BTEC solutions at 303K. While the mean energy of sorption process 9.6+/-0.3, 9.2+/-0.2, 9.3+/-0.3, 9.5+/-0.4kJmol(-1) for BTEC is calculated by D-R isotherm only. Rate constant of BTEC onto MOP 0.033+/-0.003, 0.030+/-0.002, 0.029+/-0.002, 0.027+/-0.002min(-1) at solution concentration of 1.3x10(-3), 1.1x10(-3), 0.9x10(-3) and 0.8x10(-3)moldm(-3) and at 303K have been calculated by employing Lagergren equation. Thermodynamic parameters DeltaH -8+/-0.4, -10+/-0.6, -11+/-0.7, -11+/-0.7kJmol(-1), DeltaS -22+/-2, -26+/-2, -27+/-2, -29+/-3Jmol(-1)K(-1) and DeltaG(303K) -0.9+/-0.2, -1.9+/-0.2, -2.3+/-0.1 and -2.6+/-0.2kJmol(-1) were also estimated for BTEC respectively at temperatures 283-308K. The negative values of DeltaH, DeltaS and DeltaG suggest exothermic, stable (with no structural changes at solid-liquid interface) and spontaneous nature of sorption process under optimized conditions. MOP has been used extensively to accrue and then to preconcentrate benzene, toluene and ethylbenzene in wastewater sample.

Adsorption↗