SEARCH · PubMed Health

Results for “Elastic Modulus”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77Linked to original sources

PubMedDate not supplied

Magnetic resonance elastography of the plantar fat pads: Preliminary study in diabetic patients and asymptomatic volunteers.

OBJECTIVE: To test the feasibility of applying the magnetic resonance elastography (MRE) technique to map the elastic modulus of the plantar fat pads in diabetic and nondiabetic subjects. METHODS: A prototype MRE imaging apparatus was used to produce quantitative maps of the heel fat pad in a pilot study of 12 volunteers and 4 patients with diabetes with neuropathy. Anatomic images corresponding to MRE maps allowed precise selection of regions of interest in the fat. RESULTS: Magnetic resonance elastograms of the heel fat pads were successfully created; mean measurements in the volunteers and the diabetic patients were 4.85 and 5.26 kPa, respectively. CONCLUSION: It is feasible to perform MRE on the plantar fat pads and to produce elasticity maps. The trend toward stiffer fat pads, as demonstrated in patients with diabetes, suggests that the fat pads were qualitatively different. Magnetic resonance elastography offers great potential to investigate the mechanical properties of soft tissues in vivo noninvasively.

Adipose Tissue↗

PubMed2005

Hardness and elasticity of bonded carious and sound primary tooth dentin.

OBJECTIVE: Although biomechanical properties of bonded dentin are important for resin restorations, no information for primary teeth has been reported. This study evaluated the hardness and elastic modulus of bonded carious and sound primary tooth dentin using two adhesive systems. METHODS: Twelve sound primary molars and 17 carious primary molars were bonded with Clearfil SE Bond (SE: Kuraray) or Single Bond (SB: 3M) and the resin-dentin interface was measured with a nano-indentator and observed with a SEM. Data was statistically analyzed using ANOVA subsequent application of Fisher's PLSD at p<0.01. RESULTS: Compared to the dentin beneath the interface, the hardness of the interface dentin was not significantly different (carious-SE, sound-SE and sound-SB groups) or was significantly higher (carious-SB group). Young's modulus of the interface dentin was not significantly different (carious-SE, carious-SB and sound-SB groups) or was significantly lower (sound-SE group) than that for the dentin beneath the interface. In the comparison of the measurement on the interface dentin, the hardness showed no significant differences among all the groups. The Young's modulus of the sound-SE group was significantly lower than that of the carious-SE and sounds-SB groups, but no significant difference was observed between the carious-SB and other groups. CONCLUSIONS: Physical properties of bonded primary tooth dentin might differ from that of permanent tooth dentin.

Analysis of Variance↗

PubMed2000

Preparation of macroporous poly(2-hydroxyethyl methacrylate) hydrogels by enhanced phase separation.

Macroporous poly(2-hydroxyethyl methacrylate) (p(HEMA)) hydrogels were prepared in the presence of a 0.3-0.7 M NaCl solution. The pore morphology of the p(HEMA) hydrogels was dependent on the concentration of NaCl for a constant monomer solution to aqueous solution ratio. Swelling studies showed an increase in equilibrium water content and hydrogel porosity as the NaCl concentration in the polymerization medium increased from 0 to 0.7 M. The equilibrium water content, however, decreased as the NaCl concentration in the swelling medium increased. The frozen water content increased and non-frozen water decreased with an increase in the NaCl concentration in the polymerization medium. Mechanical testing indicated that the elastic modulus of the hydrogels was not affected by the increased porosity until the pores became interconnected. These data suggest that the addition of NaCl to the polymerization medium results in a multi-phase separation during fabrication that produces macroporous hydrogels of controlled morphology.

Calorimetry, Differential Scanning↗

PubMed2002

Rheological evaluation of thermosensitive and mucoadhesive vaginal gels in physiological conditions.

The timely gelation and retention of in situ-gelling vaginal formulations would be fundamental to improve the efficacy of drugs. In this study, various rheological properties of clotrimazole gels were evaluated for predicting their performance in vagina. Two kinds of thermosensitive and mucoadhesive formulations were composed of poloxamer 407 (P407, 15%), polycarbophil (0.2%), and different amounts of P188 (15 vs. 20%). Both formulations were Newtonian at 20 degrees C but non-Newtonian at 37 degrees C. Although both liquid formulations gelled below the vaginal temperature, they differed in gelation time and viscoelastic properties in the presence of vaginal fluid simulant. At body temperature, the formulation with 20% of P188 gelled within 35 s but it took two times longer for the other one gelled. Upon dilution with simulated vaginal fluid, the formulation with 20% of P188 retained the rheology of a gel, but the other one lost the viscoelastic properties typical for a gel. Moreover, after dilution with simulated vaginal fluid, the elastic modulus was orders of magnitude higher in the formulations with 20% of P188 relative to the other one. These results indicate that the rheological evaluation at the physiologic conditions needs to be preceded to develop more effective in situ-gelling vaginal formulations.

Acrylic Resins↗

PubMed2005

Radial compression elasticity of single DNA molecules studied by vibrating scanning polarization force microscopy.

The radial compression properties of single DNA molecules have been studied using vibrating scanning polarization force microscopy. By imaging DNA molecules at different vibration amplitude set-point values, we obtain the correlations between radially applied force and DNA compression, from which the radial compressive elasticity can be deduced. The estimated elastic modulus is approximately 20-70 MPa under small external forces (<0.4 nN) and increases to approximately 100-200 MPa for large loads.

Compressive Strength↗

PubMed2000

Extrinsic cell infiltration and revascularization accelerate mechanical deterioration of the patellar tendon after fibroblast necrosis.

This study was performed to determine the contribution of extrinsic cell infiltration and revascularization into the patellar tendon in alteration of the mechanical properties of the patellar tendon after intrinsic fibroblast necrosis using 77 rabbits. In Group I, after the patellar tendon underwent the in situ freeze-thaw treatment, a wrapping treatment was performed to inhibit any extrinsic cell infiltration into the tendon. In Group II, the patellar tendon underwent the freeze-thaw treatment without any of the wrapping treatment. In Group III, the patellar tendon underwent the same wrapping treatment but without any freeze-thaw treatment. The cell culture study demonstrated that the in situ freeze-thaw treatment killed from 97 to 100 percent of the cells in the patellar tendon. Histologically, no cells were found in the midsubstance of the patellar tendon in Group I at 1, 3, and 6 weeks. In Group II, a number of cells and some vessels were found scattered in the tendon at 3 and 6 weeks. Mechanically, the elastic modulus and the tensile strength of the patellar tendon of Group II were significantly lower than those of Groups I and III at 3 and 6 weeks. These facts suggest that extrinsic cell infiltration and revascularization from the surrounding tissues accelerate the deterioration of the mechanical properties of the patellar tendon matrix after intrinsic fibroblast necrosis.

Animals↗

PubMed2004

Tumorigenesis of murine erythroleukemia cell line transfected with exogenous p53 gene.

Mutant p53 gene and wild-type p53 gene were introduced into murine erythroleukemia cell line (MEL). The MEL cells transfected with mutant p53 gene (MEL-M) and with wild-type p53 gene (MEL-W) were obtained by G418 selection. MEL, MEL-W and MEL-M were injected intraperitoneally into BALB/C mice. In the first week after injection, the signs of erythroleukemia were induced in all three groups. Abnormalities were mainly found in the spleen, bone marrow, liver and peripheral blood. There was an increase of proerythroblasts in the bone marrow. A large amount of normoblasts (early and intermediate erythroblasts) appeared in the spleen. In the peripheral blood, the white blood cells, reticulocyte and platelet counts increased and RBC count and hematocrit decreased. The degree of abnormalities in the MEL-W group was significantly lower than that in other two groups. Hemorheological measurements indicated that the deformability and orientation of RBCs in MEL and MEL-M groups were impaired, whereas those in MEL-W group did not change significantly. Micropipette aspiration measurement revealed that MEL-W had higher elastic modulus than MEL and MEL-M, indicating that it was more difficult for MEL-W to deform and migrate in vivo. The results of animal test and micropipette suggest that exogenous wild-type p53 gene could reduce the tumorigenesis of murine erythroleukemia cells.

Animals↗

PubMed2004

The degree of mineralization is a determinant of bone strength: a study on human calcanei.

Strength of bones depends on bone matrix volume (BMV), bone microarchitecture, and also on the degree of mineralization of bone (DMB). We have recently shown in osteoporotic patients treated with alendronate that fracture risk decreased and bone mineral density increased with a parallel increase of the DMB due to prolonged secondary mineralization but without modifications of BMV or bone microarchitecture. DMB and strength were both measured at the tissue level in calcaneus bone samples taken at autopsy from 20 subjects (aged 78 +/- 8 years, 8 women, 12 men) who died suddenly without apparent bone disease. DMB parameters measured on microradiographs (mean DMB, distribution of DMB, most frequent maximum DMB value, and width at half maximum, an index reflecting the homogeneity of DMB) were compared with those reported in iliac cancellous bone samples of 43 human bones. Histomorphometric measurements of microarchitectural parameters (TbTh, TbN, and TbSp) were also measured. Compression tests were performed on contiguous samples of the same calcaneus on a universal screw-driven machine (Schenck RSA 250). A 5000-N load cell (TME, F 501 TC) measured the compressive load. The displacement was measured directly on the sample using a specific displacement transducer developed by the < > The apparent Young's modulus (E), the maximal strength (sigma(max)), and the work (W) until failure were measured. In human cancellous bone tissue, mean DMB (+/- SD) was higher in calcaneus (1.135 +/- 0.147 g/cm(3)) than in iliac crest (1.098 +/- 0.077 g/cm(3)). The mean most frequent maximum DMB values (mean DMB freq. max.) were 1.118 +/- 0.175 g/cm(3) in calcaneus and 1.108 +/- 0.095 g/cm(3) in iliac samples, and DMB was more heterogeneous in calcaneus than in iliac samples (mean width at half maximum were 0.270 +/- 0.127 versus 0.227 +/- 0.056 g/cm(3), respectively). Compression tests revealed significant positive linear correlations between DMB and both elastic modulus (r(2) = 0.69) and maximal strength (r(2) = 0.69). Correlations with DMB persisted (P < 0.003) even after adjustment for both calcified bone volume, for the Young's modulus (E), the maximal strength (sigma(max)) (r(2) = 0.44 and 0.41, respectively), and microarchitectural parameters (0.50 < r(2) < 0.56, P < 0.001). The same results were obtained with the work to fracture (W) (0.23 < r(2) < 0.46, P < 0.045). We conclude that the more the cancellous tissue was mineralized, the higher was its stiffness and compressive strength. This may explain the increase in bone strength when DMB is modified in a physiological range without necessary changes of BMV and bone microarchitecture. The impact of such modifications on fracture risk and the therapeutic implications of these data remain to be analyzed.

Aged↗

PubMed2002

Targeted disruption of dermatopontin causes abnormal collagen fibrillogenesis.

Gene targeting of a member of small leucine-rich repeat proteoglycans demonstrates that collagen fibrillogenesis is mediated by a set of extracellular matrix components, which interact with collagen. Collagen-associated protein dermatopontin knockout mice were generated in order to analyze the biologic involvement of dermatopontin in the formation of collagen fibrils. Although dermatopontin-null mice did not exhibit any obvious anatomical abnormality, skin elasticity was increased. Skin tensile tests revealed that the initial elastic modulus was 57% lower in dermatopontin-null mice than in wild-type mice, and that maximum tensile strength was similar. Remarkably, light microscopy study showed a significant decrease in the relative thickness of the dermis in dermatopontin-null mice compared with wild-type mice (45.2 +/- 3.09% and 57.8 +/- 4.25%, respectively). The skin collagen content was 40% lower in dermatopontin-null than in wild-type mice. Collagen fibrils in dermatopontin-null mice showed a great variety in diameter and irregular contours under the electron microscope. These data indicate that dermatopontin plays a critical role in elasticity of skin and collagen accumulation attributed to collagen fibrillogenesis in vivo.

Animals↗

PubMed2004

The effect of a self-etching primer on the continuous demineralization of dentin.

Self-etching primers (SEP), used for adhesion of resin restorations, contain an acidic monomer that is not rinsed off after application; therefore, residual acid could further demineralize dentin, jeopardizing adhesion. This study evaluated whether dentin demineralization continues after a 20-s application of a SEP and also after polymerization of the adhesive. Surface recession was measured, using atomic force microscopy (AFM), between the masked surface and dentin etched with SEP (Clearfil SE Bond) or phosphoric acid (pH 1.94) immediately, 5 min, 2 h or 12 h after application. AFM-based nanoindentations were performed to determine mechanical property profiles across resin-bonded interfaces of two sequence groups: SG 1, where the adhesive was applied and polymerized immediately after application of the primer and specimens were immersed in Hank's solution after 5 min, 2 h and 12 h; or SG 2, where specimens were placed in an incubator before the application of the adhesive, for the same time periods. Significant surface recession occurred over time for all groups, except for SEP before desiccation. Nanoindentations yielded decreased hardness and elastic modulus below the hybrid layer after application of the initial primer, even after polymerization of the adhesive. The results reveal a demineralized dentin zone below the hybrid layer formed by the SEP, not fully protected by the adhesive, which could jeopardize bond strength.

Acid Etching, Dental↗

PubMed1980

[Role of the orientation of the collagen fibers on the mechanical properties of the carotid wall].

Mechanical test was applied to several carotid walls air-dried under different degree of deformation along the circumferential direction. The stress-strain curves show an increase of the elastic modulus as a function of the deformation. X-ray diffraction studies were applied to determine the degree of collagen orientation in the deformed samples. The carotid wall, in agreement with the "composite materials theory", shows that the collagen is the most responsible factor of the mechanical properties of the tissue.

Animals↗

PubMed2003

Enzyme-catalyzed gel formation of gelatin and chitosan: potential for in situ applications.

We compared the ability of two enzymes to catalyze the formation of gels from solutions of gelatin and chitosan. A microbial transglutaminase, currently under investigation for food applications, was observed to catalyze the formation of strong and permanent gels from gelatin solutions. Chitosan was not required for transglutaminase-catalyzed gel formation, although gel formation was faster, and the resulting gels were stronger if reactions were performed in the presence of this polysaccharide. Consistent with transglutaminase's ability to covalently crosslink proteins, we observed that the transglutaminase-catalyzed gelatin-chitosan gels lost the ability to undergo thermally reversible transitions (i.e. sol-gel transitions) characteristic of gelatin. Mushroom tyrosinase was also observed to catalyze gel formation for gelatin-chitosan blends. In contrast to transglutaminase, tyrosinase-catalyzed reactions did not lead to gel formation unless chitosan was present (i.e. chitosan is required for tyrosinase-catalyzed gel formation). Tyrosinase-catalyzed gelatin-chitosan gels were observed to be considerably weaker than transglutaminase-catalyzed gels. Tyrosinase-catalyzed gels were strengthened by cooling below gelatin's gel-point, which suggests that gelatin's ability to undergo a collagen-like coil-to-helix transition is unaffected by tyrosinase-catalyzed reactions. Further, tyrosinase-catalyzed gelatin-chitosan gels were transient as their strength (i.e. elastic modulus) peaked at about 5h after which the gels broke spontaneously over the course of 2 days. The strength of both transglutaminase-catalyzed and tyrosinase-catalyzed gels could be adjusted by altering the gelatin and chitosan compositions. Potential applications of these gels for in situ applications are discussed.

Biocompatible Materials↗

PubMed2004

Modification of beta-lactoglobulin by oligofructose: impact on protein adsorption at the air-water interface.

Maillard products of beta-lactoglobulin (betaLg) and fructose oligosaccharide (FOS) were obtained in different degrees of modification depending on incubation time and pH. By use of a variety of biochemical and spectroscopic tools, it was demonstrated that the modification at limited degrees does not significantly affect the secondary, tertiary, and quaternary structure of betaLg. The consequence of the modification on the thermodynamics of the protein was studied using differential scanning calorimetry, circular dichroism, and by monitoring the fluorescence intensity of protein samples with different concentrations of guanidine-HCl. The modification leads to lowering of the denaturation temperature by 5 degrees C and a reduction of the free energy of stabilization of about 30%. Ellipsometry and drop tensiometry demonstrated that upon adsorption to air-water interfaces in equilibrium modified betaLg exerts a lower surface pressure than native betaLg (16 versus 22 mN/m). Moreover, the surface elastic modulus increased with increasing surface pressure but reached significantly smaller values in the case of FOS-betaLg. Compared to native betaLg, modification of the protein with oligofructose moieties results in higher surface loads and thicker surface layers. The consequences of these altered surface rheological properties are discussed in view of the functional behavior in technological applications.

Adsorption↗

PubMed2000

Use of alpha-tricalcium phosphate (TCP) as powders and as an aqueous dispersion to modify processing, microstructure, and mechanical properties of polymethylmethacrylate (PMMA) bone cements and to produce bone-substitute compounds.

Addition of tricalcium phosphate (alpha-TCP) powders as an aqueous dispersion to a polymethylmethacrylate (PMMA) bone cement is shown to produce a class of composites that due to their microstructure and mechanical properties may be suitable for application as bone substitutes. The PMMA forms a solid cellular matrix with open cells about 100 micrometer in size and incorporating TCP clusters. The TCP aggregates inside the cells form a porous network, with average mesopore diameters of about 0.1 micrometer, that is accessible from the outer surface. If TCP is added to PMMA in the form of dried powders, the composites are not applicable as bone substitutes. The dynamic elastic modulus (DEM) and compressive and tensile strengths were measured and discussed for both classes of composites. The mechanical properties of the bone-substitute composites, although lower than the other class of composites, are still competitive with those properties of a porous ceramic matrix of hydroxyapatite and with those of natural bones.

Bone Cements↗

PubMed2004

Processing and properties of porous poly(L-lactide)/bioactive glass composites.

Porous poly(L-lactide)/bioactive glass (PLLA/BG) composites were prepared by phase separation of polymer solutions containing bioactive glass particles (average particle size: 1.5 microm). The composite microstructures consist of a porous PLLA matrix with glass particles distributed homogeneously throughout. Large pores (>100 microm) are present in a network of smaller (<10 microm) interconnected pores. The porous microstructure of the composites was not significantly influenced by glass content (9 or 29 vol%), but silane pretreatment of the glass resulted in better glass incorporation in the matrix. Mechanical tests showed that an increase in glass content increased the elastic modulus of the composites, but decreased their tensile strength and break strain. Silane pretreatment enhanced the increase in modulus and prevented the decrease in tensile strength with increasing glass content. Composites soaked in simulated body fluid (SBF) at body temperature formed bone-like apatite inside and on their surfaces. The silane pretreatment of glass particles delayed the in vitro apatite formation. This bone-like apatite formation demonstrates the composites' potential for integration with bone.

Biocompatible Materials↗

PubMed1998

Degeneration affects the anisotropic and nonlinear behaviors of human anulus fibrosus in compression.

Axial and radial specimens of non-degenerate and degenerate human anulus fibrosus (AF) were tested in confined compression to test the hypothesis that degeneration significantly affects the compressive properties of AF. Due to the highly oriented structure of AF, a secondary objective was to investigate anisotropic behaviors of AF in compression. Uniaxial swelling and stress relaxation experiments were performed on site-matched samples of anulus from the anterior outer region of L2-3 intervertebral discs. The experimental stress-relaxation behavior was modeled using the finite deformation biphasic theory and a finite-difference approximation scheme. Significant effects of degeneration but not orientation were detected for the reference stress offset, sigma(offset), and parameters describing the compressive stiffness (i.e. reference aggregate modulus, H(A0), and nonlinear stiffening coefficient, beta). Average values were 0.13+/-0.06 and 0.05+/-0.05 MPa for sigma(offset), 0.56+/-0.21 and 1.10+/-0.53 MPa for H(A0) and 2.13+/-1.48 and 0.44+/-0.61 for beta for all normal and degenerate specimens, respectively. No significant effect of degeneration or orientation were detected for either of the parameters describing the strain-dependent permeability (i.e. reference permeability, k0 and strain-dependent permeability coefficient, M) with average values for all specimens of 0.20+/-0.10 x 10(-15) m4/N-s and 1.18+/-1.30 for k0 and M, respectively. The loss of sigma(offset) was compensated with an elastic stiffening and change in the shape of the equilibrium stress-strain curve with H(A0) for degenerate tissues almost twice that of normal tissues and beta less than one sixth. The increase in reference elastic modulus with degeneration is likely related to an increase in tissue density resulting from the loss of water content. The significant effects of degeneration reported in this study suggested a shift in load carriage from fluid pressurization and swelling pressure to deformation of the solid matrix of the AF. The results also suggest that the highly organized and layered network of the anulus fibrosus, which gives rise to significant anisotropic effects in tension, does not play a major role in contributing to the magnitude of compressive stiffness or the mechanisms of fluid flow of the anulus in the confined compression configuration.

Adolescent↗

PubMed2004

Conch shell structure and its effect on mechanical behaviors.

The shell of pink conch is a kind of natural well-designed composite with excellent mechanical properties, which provides us information for material design. In this paper the microstructures of pink conch shell are characterized by using SEM and TEM. The microscopic analysis indicates that the pink conch shell is with crossed-lamellar microstructure and the angle between two second-order lamellae is 70-90 degrees. The cracking and fracture morphologies indicate that the crack deflection, bridge and fiber pullout are the main toughening mechanisms. Bamboo lamellae are employed to make the simple bio-mimetic model materials. In the model material the rotated angle between the fibers of each glued lamella varies from 0 degrees to 90 degrees. Three-point-bending is employed to test the properties of models material, such as the elastic modulus, the flexural strength and the fracture strain energy density. It is found that the fracture strain energy density of the specimens with the rotated angle between the fibers of the layers about 60 degrees exhibits the maximum value, which is close to the angle of the two second-order lamellae of the conch shell.

Animals↗

PubMed2000

Chemical gradient in plasma-sprayed HA coatings.

The microstructure and inhomogeneous features of plasma-sprayed hydroxyapatite coatings on titanium substrates have been examined using the time-of-flight secondary ion mass spectroscopy (ToF-SIMS), micro-Raman spectroscopy and nano-indentation techniques. The crystalline and amorphous areas in coatings can be identified by the elastic modulus difference. The concentration gradient of O and OH ions was detected in the through-thickness direction of coatings. Lack of O and OH ions near the titanium interface implies the existence of phases other than HA, and might result in excessive adsorption of the coatings near the interface in HA-coated Ti implants.

Alloys↗