SEARCH · PubMed Health

Results for “Tissue Engineering”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77Linked to original sources

PubMed2002

Promoter competition assay for analyzing gene regulation in joint tissue engineering.

We describe a new biochemical technique, "promoter competition assay," for examining the role of cis-acting DNA elements in tissue cultures. Recent advances in tissue engineering permit the culture of a variety of cells. Many tissues are engineered, however, without an appropriate understanding of molecular machinery that regulates gene expression and cellular growth. For elucidating the role of cis-acting regulatory elements in cellular differentiation and growth, we developed the promoter competition assay. This assay uses a transient transfer into cells of double-stranded DNA fragments consisting of cis-acting regulatory elements. The transferred DNA fragments act as a competitor and titrate the function of their genomic counterparts. Using synovial cells derived from a rheumatoid arthritis patient, we examined a role of NF-kappa B binding sites in the regulation of the expression of matrix metalloproteinase (MMP) genes. The results support a stimulatory role of NF-kappa B in transcriptional regulation of MMP-1 and MMP-13.

Arthritis, Rheumatoid↗

PubMed2006

Combination of 3D tissue engineered scaffold and non-viral gene carrier enhance in vitro DNA expression of mesenchymal stem cells.

The objective of this study is to enhance the expression of a plasmid DNA for mesenchymal stem cells (MSC) by combination of 3-dimensional (3D) tissue engineered scaffolds and non-viral gene carrier. As a carrier of plasmid DNA, dextran-spermine cationic polysaccharide was prepared by means of reductive-amination between oxidized dextran and the natural oligoamine, spermine. As the MSC scaffold, collagen sponges reinforced by incorporation of poly(glycolic acid) (PGA) fibers were used. A complex of the cationized dextran and plasmid DNA of BMP-2 was impregnated into the scaffolds. MCS were seeded into each scaffold and cultured by a 3D culture method. When MSC were cultured in the PGA-reinforced sponge, the level of BMP-2 expression was significantly enhanced by the cationized dextran-plasmid DNA complex impregnated into the scaffold than by the cationized dextran-plasmid DNA complex in 2-dimensional (2D) (tissue culture plate) culture method. The alkaline phosphatase activity and osteocalcin content of transfected MSC cultured in the PGA-reinforced sponge were significantly higher compared with 2D culture method. We conclude that combination of cationized dextran plasmid DNA complex and 3D tissue engineered scaffold was promising to promote the in vitro gene expression for MSC.

Animals↗

PubMed2005

Three-dimensional fiber-deposited PEOT/PBT copolymer scaffolds for tissue engineering: influence of porosity, molecular network mesh size, and swelling in aqueous media on dynamic mechanical properties.

Among novel scaffold fabrication techniques, 3D fiber deposition (3DF) has recently emerged as a means to fabricate well-defined and custom-made scaffolds for tissue regeneration, with 100% interconnected pores. The mechanical behavior of these constructs is dependent not only on different three-dimensional architectural and geometric features, but also on the intrinsic chemical properties of the material used. These affect the mechanics of the solid material and eventually of 3D porous constructs derived from them. For instance, poly(ethylene oxide terephthalate)-poly(butylene terephthalate) (PEOT/PBT) block copolymers are known to have mechanical properties, depending on the PEOT/PBT weight ratio in block form and on the molecular weight of the initial poly(ethylene glycol) (PEG) blocks. These differences are enhanced even more by their different swelling properties in aqueous media. Therefore, this article examines the influence of copolymer compositions in terms of their swelling on dynamic mechanical properties of solid material and porous 3DF scaffolds. The molecular weight of the starting PEG blocks used in the copolymer synthesis varied from 300 to 1000 g/mol. The PEOT/PBT weight ratio in the blocks used varied from 55/45 to 80/20. This corresponded to an increase of the swelling ratio Q from 1.06 to 2.46, and of the mesh size xi from approximately 9 Angstrom to approximately 47 Angstrom. With increased swelling, dynamic mechanical analysis (DMA) revealed a decrease in elastic response and an increase of viscoelasticity. Thus, by coupling structural and chemical characteristics, the viscoelastic properties of PEOT/PBT 3DF scaffolds may be fine tuned to achieve mechanical requirements for a variety of engineered tissues. Ultimately, the combination of 3DF and DMA may be useful to validate the hypothesis that mimicking the biomechanical behavior of a specific tissue for its optimal replacement is an important issue for at least some tissue-engineering applications.

Animals↗

PubMed2001

Cardiovascular physiology during fetal development and implications for tissue engineering.

Shear stress in fluid dynamics has a well-known impact on vascular cell morphology, proliferation, orientation, and the organization and composition of extracellular matrix. There is an increasing interest in the field of tissue engineering to use defined shear stress in bioreactors for tissue conditioning and guided tissue formation. Especially for cardiovascular structures like heart valves or blood vessels, the type and appropriate amount of shear stress needed to improve tissue formation remains speculative. The authors believe that fetal-like conditions may be more optimal for new tissue formation in a bioreactor. The purpose of this review is to delineate parameters of cardiovascular physiology during embryonic and fetal development that may have a potential impact on the design and setting of bioreactors for cardiovascular tissue engineering.

Biomedical Engineering↗

PubMedDate not supplied

Distraction osteogenesis assisted by tissue engineering in an irradiated mandible: a case report.

Distraction osteogenesis (DO) can provide predictable bone regeneration without grafting procedures but requires long treatment time and forms less bone transverse to the direction of distraction. To promote 3-dimensional bone formation and shorten the consolidation period, tissue-engineered osteogenic material (injectable bone) was applied in a patient who was being treated with vertical DO with an osteocutaneous fibular flap to reconstruct the mandible. The material, which comprised autologous mesenchymal stem cells culture-expanded then induced to be osteogenic in character and platelet-rich plasma (PRP) activated with thrombin and calcium chloride, was infiltrated into the distracted tissue at the end of distraction and injected into a space created labially with a titanium mesh at implant placement. The infiltration contributed to full consolidation of the regenerate for 3 months, and the injection thickened the regenerated ridge and bridged a gap between the native mandible and distracted fibula. The reconstructed mandible was expanded from 10 mm to 25 mm in height despite a lacerated and opened labial periosteum in the distracted area. Six implants 18 mm in length were placed and subsequently achieved osseointegration. The cutaneous flap covering the implants was trimmed, and the palatal mucosa was transplanted to the regenerated ridge for vestibuloplasty. These raw surfaces were covered with PRP; within 3 weeks, they had attained an epithelium. The implants have supported a fixed prosthesis with adequate surrounding bone and attached mucosa. DO was assisted by tissue engineering and became effective in restoring the compromised mandible.

Blood Platelets↗

PubMed2004

Tissue-engineered bone via seeding bone marrow stem cell derived osteoblasts into coral: a rat model.

In the present study, natural coral of porites species was used as scaffold combined with in vitro expanded bone marrow stem cell derived osteoblasts (BMSC-DO), to develop a tissue-engineered bone graft in a rat model. Coral was molded into the shape of rat mandible seeded with 5x10(6) /ml BMSC-DO subsequently implanted subcutaneously in the back of 5 week Sprague dawely rats for 3 months. Coral alone was implanted as a control. The implants were harvest and processed for gross inspection and histological observations. The results showed that newly bone grafts were successfully formed coral seeded with cells group showed smooth highly vascularized like bone tissue. Histological sections revealed mature bone formation and lots of blood vessel, the bone formation occurred in the manner resemble intramembraneous bone formation. This study demonstrates that coral can be use as a suitable scaffold material for delivering bone marrow mesenchymal stem cells in tissue engineering.

Animals↗

PubMed2005

Tissue engineering strategies for cartilage generation--micromass and three dimensional cultures using human chondrocytes and a continuous cell line.

Utilizing ATDC5 murine chondrogenic cells and human articular chondrocytes, this study sought to develop facile, reproducible three-dimensional models of cartilage generation with the application of tissue engineering strategies, involving biodegradable poly(glycolic acid) scaffolds and rotating wall bioreactors, and micromass pellet cultures. Chondrogenic differentiation, assessed by histology, immunohistochemistry, and gene expression analysis, in ATDC5 and articular chondrocyte pellets was evident by the presence of distinct chondrocytes, expressing Sox-9, aggrecan, and type II collagen, in lacunae embedded in a cartilaginous matrix of type II collagen and proteoglycans. Tissue engineered explants of ATDC5 cells were reminiscent of cartilaginous structures composed of numerous chondrocytes, staining for typical chondrocytic proteins, in lacunae embedded in a matrix of type II collagen and proteoglycans. In comparison, articular chondrocyte explants exhibited areas of Sox-9, aggrecan, and type II collagen-expressing cells growing on fleece, and discrete islands of chondrocytic cells embedded in a cartilaginous matrix.

Animals↗

PubMed2004

[Current status of tissue engineering in urology. Review of the literature].

In the eighties a new field of the medicine appears wich applies the principles of cellular cultivation to synthetic biodegradable polymers scaffolds with the purpose of creating autologous biological substitutes that could improve, maintain or restore the function of organs or damaged tissues. The Tissue Engineering constitutes a new discipline in full phase of development especially in USA, with multiple potential applications in several medical specialities. Our speciality can't remain indifferent to interest and encouraging future originated by this new science. In this work we have made a wide bibliographical revision in the Medline to know the antecedents, current state and the possible future applications of Tissue Engineering in Urology.

Humans↗

PubMed2006

[Experimental studies on tissue engineered esophagus reconstructed with artificial biodegradable scaffold].

OBJECTIVE: To verify adhesion and growth ability of canine esophageal epithelial cells (EECs) on the poly (lactic-co-glycolic acid) (PLGA), a three-dimensional biodegradable polymer scaffold, and to reconstruct the canine esophagus by the tissue engineering. METHODS: Free canine EECs isolated from adult dogs by esophagoscopy were seeded onto the PLGA scaffolds precoated with collagen type IV after the first passage by the in vitro culture. Then, the composites of the cell-scaffold were respectively cultured in vitro and in the abdominal cavity of the dog in vivo. After different periods, the cell-seeded scaffolds were assessed by histological HE staining, scanning electron microscopy, and immunohistochemical analysis. RESULTS: The cells displayed a cobblestone-shaped morphology that was characteristic of the epithelial cells and were stained to be positive for cytokeratin, which indicated that the cells were EECs. The canine EECs were well distributed and adhered to the PLGA scaffolds, and maintained their characteristics throughout the culture period. After the culture in vivo for 4 weeks, the cell-seeded scaffolds looked like tissues. CONCLUSION: PLGA scaffolds precoated with collagen type IV can be suitable for adhesion and proliferation of EECs, and can be used as a suitable tissue engineering carrier of an artificial esophagus.

Absorbable Implants↗

PubMedDate not supplied

Construction and delivery of tissue-engineered human retinal pigment epithelial cell sheets, using magnetite nanoparticles and magnetic force.

Choroidal neovascularization (CNV) is the most severe form of age-related macular degeneration (AMD), which causes rapid visual loss. Transplantation of cultured retinal pigment epithelium (RPE) cell sheet by tissue engineering is a possible approach to the treatment of CNV. In the present study, we investigated the possibility of using magnetite nanoparticles and magnetic force to construct and deliver RPE cell sheets in vitro. When magnetite cationic liposomes (MCLs), having a positive charge at the surface, were added to ARPE-19 human RPE cells at a concentration of 25 or 50 pg of magnetite per cell, the cells took up 40 to 55% of the MCLs. The magnetically labeled ARPE-19 cells (8 x 10(3) cells/mm(2), which corresponds to 10-fold the confluent concentration against the culture area [4 mm(2)]) were seeded into an ultra-low-attachment plate and a magnet (4000 G) was placed under the well. The magnetically labeled ARPE-19 cells formed an approximately 15-layered cell sheet after a 24 h of culture. When the magnet was removed, the sheets were detached from the bottom of the plate and then harvested and transferred to a tissue culture dish, using a magnet. Subsequently, the cell sheets were attached onto the dish, and the cells growing on the sheets were observed. This novel methodology, termed "magnetic force-based tissue engineering" (Mag-TE), is a possible approach for CNV treatment.

Bioprosthesis↗

PubMed2006

Biocompatibility testing of novel multifunctional polymeric biomaterials for tissue engineering applications in head and neck surgery: an overview.

Biomaterial research and tissue engineering are rapidly growing scientific fields that need an interdisciplinary approach where clinicians should be included from the onset. Biocompatibility testing in vitro and in vivo comprise the agarose-overlay test, the MTT test, direct cell seeding tests and the chorioallantoic membrane test for angiogenic effects, among others. Molecular biology techniques such as real-time polymerase chain reaction and microarray technology facilitate the investigation of tissue integration into biomaterials on a cellular and molecular level. The physicochemical characterization of biomaterials is conducted using such methods as X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Excellent biocompatibility and biofunctionality were demonstrated for a series of recently developed multifunctional biodegradable, polymeric biomaterials both in vitro and in vivo. Novel, multifunctional polymeric biomaterials offer a highly specific adjustment to the physiological, anatomical and surgical requirements and can thereby facilitate new therapeutic options in head and neck surgery.

Absorbable Implants↗

PubMed2006

Stem cell-based tissue engineering with silk biomaterials.

Silks are naturally occurring polymers that have been used clinically as sutures for centuries. When naturally extruded from insects or worms, silk is composed of a filament core protein, termed fibroin, and a glue-like coating consisting of sericin proteins. In recent years, silk fibroin has been increasingly studied for new biomedical applications due to the biocompatibility, slow degradability and remarkable mechanical properties of the material. In addition, the ability to now control molecular structure and morphology through versatile processability and surface modification options have expanded the utility for this protein in a range of biomaterial and tissue-engineering applications. Silk fibroin in various formats (films, fibers, nets, meshes, membranes, yarns, and sponges) has been shown to support stem cell adhesion, proliferation, and differentiation in vitro and promote tissue repair in vivo. In particular, stem cell-based tissue engineering using 3D silk fibroin scaffolds has expanded the use of silk-based biomaterials as promising scaffolds for engineering a range of skeletal tissues like bone, ligament, and cartilage, as well as connective tissues like skin. To date fibroin from Bombyx mori silkworm has been the dominant source for silk-based biomaterials studied. However, silk fibroins from spiders and those formed via genetic engineering or the modification of native silk fibroin sequence chemistries are beginning to provide new options to further expand the utility of silk fibroin-based materials for medical applications.

Animals↗

PubMed2007

Tissue engineering of vascularized cardiac muscle from human embryonic stem cells.

Transplantation of a tissue-engineered heart muscle represents a novel experimental therapeutic paradigm for myocardial diseases. However, this strategy has been hampered by the lack of sources for human cardiomyocytes and by the scarce vasculature in the ischemic area limiting the engraftment and survival of the transplanted muscle. Beyond the necessity of endothelial capillaries for the delivery of oxygen and nutrients to the grafted muscle tissue, interactions between endothelial and cardiomyocyte cells may also play a key role in promoting cell survival and proliferation. In the present study, we describe the formation of synchronously contracting engineered human cardiac tissue derived from human embryonic stem cells containing endothelial vessel networks. The 3D muscle consisted of cardiomyocytes, endothelial cells (ECs), and embryonic fibroblasts (EmFs). The formed vessels were further stabilized by the presence of mural cells originating from the EmFs. The presence of EmFs decreased EC death and increased EC proliferation. Moreover, the presence of endothelial capillaries augmented cardiomyocyte proliferation and did not hamper cardiomyocyte orientation and alignment. Immunostaining, ultrastructural analysis (using transmission electron microscopy), RT-PCR, pharmacological, and confocal laser calcium imaging studies demonstrated the presence of cardiac-specific molecular, ultrastructural, and functional properties of the generated tissue constructs with synchronous activity mediated by action potential propagation through gap junctions. In summary, this is the first report of the construction of 3D vascularized human cardiac tissue that may have unique applications for studies of cardiac development, function, and tissue replacement therapy.

Cell Culture Techniques↗

PubMed2005

Tissue engineering of human cartilage in bioreactors using single and composite cell-seeded scaffolds.

Chondrocytes isolated from human fetal epiphyseal cartilage were seeded under mixed conditions into 15-mm-diameter polyglycolic acid (PGA) scaffolds and cultured in recirculation column bioreactors to generate cartilage constructs. After seeding, the cell distributions in thick (4.75 mm) and thin (2.15 mm) PGA disks were nonuniform, with higher cell densities accumulating near the top surfaces. Composite scaffolds were developed by suturing together two thin PGA disks after seeding to manipulate the initial cell distribution before bioreactor culture. The effect of medium flow direction in the bioreactors, including periodic reversal of medium flow, was also investigated. The quality of the tissue-engineered cartilage was assessed after 5 weeks of culture in terms of the tissue wet weight, glycosaminoglycan (GAG), total collagen and collagen type II contents, histological analysis of cell, GAG and collagen distributions, and immunohistochemical analysis of collagen types I and II. Significant enhancement in construct quality was achieved using composite scaffolds compared with single PGA disks. Operation of the bioreactors with periodic medium flow reversal instead of unidirectional flow yielded further improvements in tissue weight and GAG and collagen contents with the composite scaffolds. At harvest, the constructs contained GAG concentrations similar to those measured in ex vivo human adult articular cartilage; however, total collagen and collagen type II levels were substantially lower than those in adult tissue. This study demonstrates that the location of regions of high cell density in the scaffold coupled with application of dynamic bioreactor operating conditions has a significant influence on the quality of tissue-engineered cartilage.

Bioreactors↗

PubMed2003

Formation of a mandibular condyle in vitro by tissue engineering.

PURPOSE: Mandibular reconstructive procedures often produce significant donor site morbidity. Recently, the use of minimally invasive techniques has been reported for mandibular reconstruction with decreased morbidity at the primary operative site. To date, these techniques have not addressed the graft donor site. We hypothesize that tissue-engineering techniques may be used to fabricate bone and thereby eliminate donor site morbidity. METHODS: Porcine mesenchymal stem cells (pMSCs) were isolated from the bone marrow of 3 Yucatan minipigs and grown in standard culture flasks. When they became near-confluent, cells were detached and replated with the addition of osteogenic supplements. A model of a porcine mandibular condyle was made and used to fabricate porous polymer scaffolds from biodegradable poly DL-lactic-co-glycolic acid (PLGA). Differentiated osteoblasts were transferred to the PLGA scaffold and cultured for 6 weeks in a rotational oxygen-permeable bioreactor system. The cultured constructs, consisting of scaffold and cells, were evaluated by gross, radiologic, and histologic examinations. RESULTS: The engineered constructs were white and hard and had a shape that closely resembled that of the model condyle. Plain radiographs demonstrated that the radiodensity of the construct was between that of the normal condyle and that of control scaffolds. Histologically, bone was observed on the entire surface of the PLGA scaffolds with an average thickness of 0.03 mm. Bone was not observed in the control scaffolds. CONCLUSION: In this pilot study, autologous tissue-engineered bone constructs were successfully made by combining biodegradable polymers and pMSCs.

Alkaline Phosphatase↗

PubMed2004

Biological and biophysical principles in extracorporal bone tissue engineering. Part II.

The aim of this review is to characterise the biological and biophysical background of in vitro bone tissue engineering. The paper focuses on basic principles in extracorporal engineering of bone-like tissues, considering parameters such as scaffold design, tissue construction, bioreactors, and cell stimulation in vivo and in vitro. Scaffolds have a key function concerning cellular invasion and bone formation. The intra-architectural scaffold geometry, as well as the scaffold material, play an important role in the process of bone regeneration. Various types of bioreactors have been tested for their utility in bone substitute fabrication that is clinically effective and reproducible. Sophisticated bioreactor systems are those that mimic the three-dimensional morphology and the mechanical situation of bones. Mechanical stimulation as well as other biophysical stimuli appear to be critical factors for proliferation and differentiation of bone cells and for bone mineral and structure formation. Furthermore an enhancement of bone regeneration by application of chemical stimulation factors is discussed.

Animals↗

PubMed2006

Should human chondrocytes fly? The impact of electromagnetic irradiation on chondrocyte viability and implications for their use in tissue engineering.

A significant logistic factor as to the successful clinical application of the autologous tissue engineering concept is efficient transportation: the donor cells need to be delivered to tissue processing facilities which in most cases requires air transportation. This study was designed to evaluate how human chondrocytes react to X-ray exposure. Primary cell cultures were established, cultured, incubated and exposed to different doses and time periods of radiation. Subsequently, quantitative cell proliferation assays were done and qualitative evaluation of cellular protein production were performed. Our results show that after irradiation of chondrocytes with different doses, no significant differences in terms of cellular viability occurred compared with the control group. These results were obtained when chondrocytes were exposed to luggage transillumination doses as well as exposure to clinically used radiation doses. Any damage affecting cell growth or quality was not observed in our study. However, information about damage of cellular DNA remains incomplete.

Apoptosis↗

PubMed2004

Regenerative medicine in andrology: Tissue engineering and gene therapy as potential treatment options for penile deformations and erectile dysfunction.

Tissue engineering and gene therapy are currently investigated in animal studies for reconstructing penile tissue or treating erectile dysfunction. This review aims to examine these experimental efforts from the last years and tries to give a brief introduction to the basic methodology of these new techniques from the field of regenerative medicine.

Andrology↗