SEARCH · PubMed Health

Results for “Polymers”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources

PubMed2003

Application of water-soluble polymers as modifiers in electrophoretic analysis of phenols.

A review of application of water-soluble cationic, anionic and nonionic polymers as pseudostationary phases in capillary electrophoresis (CE) and micellar electrokinetic capillary chromatography (MEKC) is presented. The effect of the structure of the polymers on the selectivity and efficiency of separation is discussed. A novel specially designed cationic polymer, 2,10-ionene, has been used for the separation of phenols. The polymer has hydrophilic and hydrophobic parts in its backbone. The polymer shows the best selectivity as a modifier in capillary zone electrophoresis (CZE)-mode, which allows the selective determination of both hydrophilic and hydrophobic phenols.

Phenols↗

PubMed2004

Polymer solutions and entropic-based systems for double-stranded DNA capillary electrophoresis and microchip electrophoresis.

We give an overview of recent development of low-viscosity polymer solutions and entropic trapping networks for double-stranded DNA (dsDNA) separations by conventional capillary electrophoresis and microchip electrophoresis. Theoretical models for describing separation mechanisms, commonly used noncross-linked polymer solutions, thermoresponsive (viscosity-adjustable) polymer solutions, and novel entropic trapping networks are included. The thermoresponsive polymer solutions can be loaded at one temperature into microchannels at lower viscosities, and used in separation at another temperature at entanglement threshold concentrations and higher viscosities. The entropic-based separations use only arrays of regular obstacles acting as size-separations and do not need viscous polymer solutions. These progresses have potential in integration to automated capillary and microfluidic chip systems, enabling better reusability of separation microchannels, much shorter DNA separation times, and higher reproducibility due to less matrix degradation.

Electrophoresis, Capillary↗

PubMed2005

The molecular end effect and its critical impact on the behavior of charged-uncharged polymer conjugates during free-solution electrophoresis.

Recently two novel techniques using free-solution electrophoresis to separate charged-uncharged polymer conjugates have proven successful: end-labeled free-solution electrophoresis (ELFSE) for DNA sequencing, and free-solution conjugate electrophoresis (FSCE) for molar mass profiling of uncharged polymers. The approach taken to analyze the experimental data was an extension of the theory of Long and co-workers (Long, D., Dobrynin, A. V., Rubinstein, M., Ajdari, A., J. Chem. Phys. 1998, 108, 1234-1244) for the electrophoresis of molecules with varying charge distributions. This theory also predicts that the ends of the polymers play a large role in determining the polymer's overall mobility; however, this aspect of the theory was neglected in previous work. Until now this "end effect" has, to the knowledge of the authors, not been recognized in experimental data. Through a careful investigation of the predicted end effect and a reanalysis of the experimental data, we demonstrate that indeed this effect critically impacts on the behavior of charged-uncharged polymer conjugates during electrophoresis. This work indicates that not only does the end effect need to be taken into account to avoid significant errors in data analysis, but also it provides novel system optimization approaches.

Electrophoresis↗

PubMed2002

Biological characterization of a novel biodegradable antimicrobial polymer synthesized with fluoroquinolones.

Biomaterial-related infections continue to represent a significant challenge to the medical community. Several approaches have been utilized to incorporate antimicrobial agents at the surface of implant devices in attempts to delay or eliminate the formation of biofilms. To date, most of these strategies have focused on drug conjugation or diffusion-limited systems for the delivery of such pharmaceutical agents. More recently, work has been presented on the feasibility of incorporating drugs into the backbone of polymers as a main-chain monomer. When sequenced into the backbone of the polymer with other monomers that are hydrolytically sensitive to enzyme-catalyzed breakdown, it is thought that drugs may be able to be selectively released. Specifically, degradable polyurethanes have been synthesized with fluoroquinolone antibiotics and have shown an ability to kill bacteria when released following degradation of the polymer chains by the macrophage-derived enzyme cholesterol esterase. However, specificity of the cleavage sites in the polymer was difficult to control. Since cholesterol esterase has specificity for hydrophobic moieties, it is desirable to alter the formulation of the polyurethanes to incorporate long hydrophobic monomers immediately adjacent to the ciprofloxacin molecule. Hence, the current study focuses on evaluating the enzyme-catalyzed degradation of a degradable polyurethane synthesized with 1,12 diisocyanatododecane as a substitute for 1,6 diisocyanatohexane, which was used in previous work. Validation of specific ciprofloxacin release and the generation of antimicrobial are shown. A preliminary cell study to assess the cytotoxicity of this biodegradable antibiotic polymer shows that the material has no observable effects on cell proliferation or cell membrane structure.

Animals↗

PubMed1977

A new antithrombogenic heparinized polymer.

A new antithrombogenic polymer was synthesized by photoinduced graft copolymerization of both a hydrophilic polymer and a cationic polymer to hydrophobic poly (vinyl chloride) copolymer, and by quarternizing and heparinizing the obtained graft copolymer. For polymers of various compositions obtained by the method described above, chemical composition, water absorption, membrane potential, and quantity of adsorbed heparin were determined and antithrombogenicity evaluated in vivo. Thus, it has been found that the polymer of excellent antithrombogenicity has a negative membrane potential, a moderate elution rate of heparin, adsorbs heparin in a quantity of approximately 15 wt-%, and has a degree of water adsorption of about 30 wt-%. Also, measurement of membrane potential was very useful for the estimation of the quantity of the adsorbed heparin and its change with time.

Absorption↗

PubMed1987

Adsorption of low density lipoproteins onto selected biomedical polymers.

This study examines the interaction of human low density lipoprotein (LDL) with a select group of biomedical polymers. The adsorption characteristics of LDL on cured filler-free poly(dimethyl Siloxane) (C-PDMS), Biomer, Cardiomat 610, Kraton 1650, poly(hydroxyethyl methacrylate) (PHEMA) and glass are presented. Adsorption of LDL to charged hydrophilic glass control surfaces occurred rapidly, reaching plateau concentrations within one minute (0.19 +/- 0.01 ug/cm2). Adsorption of LDL to polymer surfaces appeared to be dependent upon both the polymer hydrophobicity (or apolar nature), and flexibility (or dynamic nature) at the interface. Increased surface concentrations were observed for Biomer (0.32 +/- 0.01 ug/cm2) as well as other polymers which exhibited both hydrophobic and elastomeric properties. Temperature changes between 25 degrees C and 37 degrees C were found to significantly influence the surface concentration of LDL on Biomer (0.16 +/- 0.01 ug/cm2 at 25 degrees C versus 0.32 +/- 0.01 ug/cm2 at 37 degrees C). A lipid core phase transition at 36 degrees C was believed to be responsible for the temperature influence. Preliminary competitive adsorption studies of LDL with albumin (HSA) and serum on silicone surfaces suggests that LDL adsorption occurred rapidly and preferentially (0.25 +/- 0.01 ug/cm2 for LDL alone; 0.33 +/- 0.01 ug/cm2 for LDL + HSA; 0.15 +/- 0.01 ug/cm2 LDL + serum). Preliminary studies on the role of LDL in calcification were not conclusive. It can be concluded that LDL adsorption is dependent upon polymer hydrophobicity, flexibility and temperature. Competitive adsorption experiments suggests that LDL may have a substantial influence on protein adsorption.

Adsorption↗

PubMed1988

Human monocyte/macrophage activation and interleukin 1 generation by biomedical polymers.

In vitro cell culture techniques were used to evaluate the effect of several clinically significant biomedical polymers on monocyte activation and Interleukin 1 (IL1) production. Isolated human peripheral blood monocytes were cultured in the presence of a panel of five biomedical polymers routinely used in a variety of clinical applications: Polyethylene (PE), silica-free poly-dimethylsiloxane (PDMS), woven Dacron fabric, expanded polytetrafluoroethylene (ePTFE) and the segmented polyurethane, Biomer. Monocytes generated IL1 in the presence of all five materials. Maximal levels of IL1 were generated at 24 h in monocyte-polymer cultures supplemented with serum and additionally stimulated with lipopolysaccharide (LPS). No difference was observed due to serum source. Results from cultures supplemented with fetal bovine serum were not significantly different from those obtained with human serum supplemented cultures. The thymocyte proliferative activity generated by monocytes in the presence of these biomedical polymers was neutralized by a specific polyclonal anti-IL1 antiserum. Statistically significant differences in IL1 production were observed between polymers, allowing their classification according to reactivity into high (Dacron, PE), intermediate (ePTFE) and low (Biomer, PDMS) reactive groups.

Biocompatible Materials↗

PubMed1993

Neocartilage formation in vitro and in vivo using cells cultured on synthetic biodegradable polymers.

Cartilaginous implants for potential use in reconstructive or orthopedic surgery were created using chondrocytes grown on synthetic, biodegradable polymer scaffolds. Chondrocytes isolated from bovine or human articular or costal cartilage were cultured on fibrous polyglycolic acid (PGA) and porous poly(L)lactic acid (PLLA) and used in parallel in vitro and in vivo studies. Samples were taken at timed intervals for assessment of cell number and cartilage matrix (sulfated glycosaminoglycan [S-GAG], collagen). The chondrocytes secreted cartilage matrix to fill the void spaces in the polymer scaffolds that were simultaneously biodegrading. In vitro, chondrocytes grown on PGA for 6 weeks reached a cell density of 5.2 x 10(7) cells/g, which was 8.3-fold higher than at day 1, and equalled the cellularity of normal bovine articular cartilage. In vitro, the cell growth rate was approximately twice as high on PGA as it was on PLLA; cells grown on PGA produced S-GAG at a high steady rate, while cells grown on PLLA produced only minimal amounts of S-GAG. These differences could be attributed to polymer geometry and biodegradation rate. In vivo, chondrocytes grown on both PGA and PLLA for 1-6 months maintained the three-dimensional (3-D) shapes of the original polymer scaffolds, appeared glistening white macroscopically, contained S-GAG and type II collagen, and closely resembled cartilage histologically. These studies demonstrate the feasibility of culturing isolated chondrocytes on biodegradable polymer scaffolds to regenerate 3-D neocartilage.

Animals↗

PubMed2003

Polymers with nano-dimensional surface features enhance bladder smooth muscle cell adhesion.

Previous studies investigating the design of synthetic bladder wall substitutes have involved polymers with micro dimensional structures. Since the body is made up of nano-structured components (e.g., extracellular matrix proteins), the focus of the present in vitro study was to design nano-structured polymers for use as synthetic bladder constructs that mimic the topography of natural bladder tissue. In order to complete this task, novel nano-structured biodegradable polymeric films of poly-lactic-co-glycolic-acid (PLGA), poly-ether-urethane (PU), and poly-caprolactone (PCL) were fabricated and separately treated with various concentrations of NaOH (for PLGA and PCL) and HNO(3) (for PU) for select time periods. These treatments reduced the polymer surface feature dimensions from conventional micron dimensions to biologically inspired nanometer dimensions. Select cytocompatibility properties of these biomaterials were tested in vitro. Results provide the first evidence that adhesion of bladder smooth muscle cells is enhanced as polymer surface feature dimensions are reduced into the nanometer range. In addition, surface analysis results reveal that the polymer nanometer surface roughness is the primary design parameter that increases bladder smooth muscle cell adhesion. For this reason, the "next generation" of tissue-engineered bladder constructs with increased efficacy should contain surfaces with nanometer (as opposed to micron) surface features.

Animals↗

PubMed2005

Thermomechanics of the shape memory effect in polymers for biomedical applications.

We examine the shape memory effect in polymer networks intended for biomedical, and specifically cardiovascular, applications. The polymers were synthesized by photopolymerization from a tert-butyl acrylate monomer with a diethyleneglycol diacrylate crosslinker. Three-point flexural tests were used to systematically investigate the thermomechanics of shape storage (predeformation) and shape recovery. The glass transition temperature, T(g), of the polymers was determined to be approximately 65 degrees C. The polymers show 100% strain recovery, at low and high predeformation temperatures, up to maximum strains of approximately 80%. The polymers show a sigmoidal free strain recovery response as a function of increasing temperature at a constant heating rate. Free strain recovery was determined to depend on the temperature during predeformation; lower predeformation temperatures (T < T(g)) decreased the temperature required for free strain recovery. Constrained stress recovery shows a complex evolution as a function of temperature and also depends on the temperature during predeformation. Stress recovery after low-temperature predeformation (T < T(g)) shows a peak in the generated recovery stress, whereas stress recovery after high-temperature predeformation (T > T(g)) is sigmoidal. The isothermal free strain recovery rate was found to increase with increasing temperature or decreasing predeformation temperature. The thermomechanical results are discussed in light of potential biomedical applications, and a prototype device is presented.

Biocompatible Materials↗

PubMed2006

TGF-beta1 immobilized tri-co-polymer for articular cartilage tissue engineering.

Tri-co-polymer with composition of gelatin, hyaluronic acid and chondroitin-6-sulfate has been used to mimic the cartilage extracellular matrix as scaffold for cartilage tissue engineering. In this study, we try to immobilize TGF-beta1 onto the surface of the tri-co-polymer sponge to suppress the undesired differentiation during the cartilage growth in vitro. The scaffold was synthesized with a pore size in a range of 300-500 microm. TGF-beta1 was immobilized on the surface of the tri-co-polymer scaffold with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) as a crosslinking agent. Tri-co-polymer scaffolds with and without TGF-beta1 were seeded with porcine chondrocytes and cultured in a spinner flask for 2, 4, and 6 weeks. The chondrocytes were characterized by the methods of immunohistochemical staining with anti-type II collagen and anti-S-100 protein monoclonal antibody, and RT-PCR. After culturing for 4 weeks, chondrocytes showed positive in S-100 protein, Alcian blue, and type II collagen for the scaffold with TGF-beta1 immobilization. There is no observed type I and type X collagen expression in the scaffolds from the observation of RT-PCR. In addition, the scaffold without TGF-beta1 immobilization, type X collagen, can be detected after cultured for 2 weeks. Type I collagen was progressively expressed after 4 weeks. These results can conclude that TGF-beta1 immobilized scaffold can suppress chondrocytes toward prehypertrophic chondrocytes and osteolineage cells. The tri-co-polymer sponge with TGF-beta1 immobilization should have a great potential in cartilage tissue engineering in the future.

Animals↗

PubMed1994

A simple model for estimating protein solubility in aqueous polymer solutions.

A simple scaling analysis of protein solubility in semi-diluted polymer aqueous solutions was derived based on the recent theoretical development of Abbott et al. on the interactions between protein spheres and entangled polymer coils and the experimental observations of Atha and Ingham on the polymer-induced protein precipitation. Both the hard-sphere nature of the protein and the flexibility of the polymer coils have been taken into account in the model. The experimental data can be fitted by using this model with physically reasonable values of the exponent. This approach may be useful in estimating protein solubilities in water in the presence of polymer from limited and usually costly experimental data.

Chemical Phenomena↗

PubMedDate not supplied

Modification of pLL/DNA complexes with a multivalent hydrophilic polymer permits folate-mediated targeting in vitro and prolonged plasma circulation in vivo.

BACKGROUND: Gene delivery vectors based on poly(L-lysine) and DNA (pLL/DNA complexes) have limited use for targeted systemic application in vivo since they bind cells and proteins non-specifically. In this study we have attempted to form folate-targeted vectors with extended systemic circulation by surface modification of pLL/DNA complexes with hydrophilic polymers. METHODS: pLL/DNA complexes were stabilised by surface modification with a multivalent reactive polymer based on alternating segments of poly(ethylene glycol) and tripeptides bearing reactive ester groups. Folate moieties were incorporated into the vectors either by direct attachment of folate to the polymer or via intermediate poly(ethylene glycol) spacers of 800 and 3400 Da. RESULTS: Polymer-coated complexes show similar morphology to uncoated complexes, their zeta potential is decreased towards zero, serum protein binding is inhibited and aqueous solubility is substantially increased. Intravenous (i.v.) administration to mice of coated complexes produced extended systemic circulation, with up to 2000-fold more DNA measured in the bloodstream after 30 min compared with simple pLL/DNA complexes. In further contrast to simple pLL/DNA complexes, coated complexes do not bind blood cells in vivo. Folate receptor targeting is shown to mediate targeted association with HeLa cells in vitro, leading to increased transgene expression. We demonstrate for the first time that DNA uptake via the folate receptor is dependent on pEG spacer length, with the transgene expression relatively independent of the level of internalised DNA. CONCLUSIONS: We show increased systemic circulation, decreased blood cell and protein binding, and folate-targeted transgene expression using pLL/DNA complexes surface-modified with a novel multireactive hydrophilic polymer. This work provides the basis for the development of plasma-circulating targeted vectors for in vivo applications.

DNA↗

PubMedDate not supplied

Molecularly imprinted polymer using-p-hydroxybenzoic acid, p-hydroxyphenylacetic acid and p-hydroxyphenylpropionic acid as templates.

Molecularly imprinted polymers (MIPs) using p-hydroxybenzoic acid (p-HB), p-hydroxyphenylacetic acid (p-HPA) and p-hydroxyphenylpropionic acid (p-HPPA) as templates were synthesized. The performance of the templates and their analogues on polymer-based high performance liquid chromatography (HPLC) columns was studied. The imprinting effect of the MIP using p-HB as template is more obvious than that of MIP using either p-HPA or p-HPPA as template, and the mixture of p-HB and p-HPA can be well separated on the MIP using p-HB as template, but not on the blank. Interestingly, the recognition of MIP (p-HB as the template) to p-HB showed a synergistic effect. The retention factor of p-HB is not the sum of those of phenol and benzoic acid. We also found that the imprinting effect decreased when increasing the concentration of acetic acid in mobile phase. The possible reason is that acetic acid molecules occupied the binding sites of the polymer, thereby decreasing the concentration of binding sites. Furthermore, polymers, which showed specificity to 3,4-dihydroxybenzoic acid, can be prepared with p-HB as template. It is thus possible to synthesize a specific polymer for a compound that is either expensive or unstable by using a structurally similar compound as template.

Acetates↗

PubMedDate not supplied

Molecularly imprinted polymer with salicylaldehyde-Cu(OAc)2 as template.

In the report molecularly imprinted polymer (MIP) with salicylaldehyde-Cu(OAc)(2) as the template was synthesized and characterized by SEM, porosity and elemental analysis. Copper acetate was introduced since salicylaldehyde alone cannot display imprinting effect for its intramolecular hydrogen bond. The strong coordination interaction between salicylaldehyde and copper acetate made the complex have high retention on the HPLC column based on the SAD-Cu(OAc)(2) imprinted polymer. Several structural analogues such as salicylaldoxime, sulfosalicylic acid, p-hydroxybenzaldehyde and their complexes with copper acetate were chosen to study the selectivity of the MIPs. The influence of acetic acid and H(2)O in methanol mobile phase was studied. The experimental results showed that small amount of either acetic acid or H(2)O in mobile phase would weaken the interaction between the complex and the polymer, therefore, the retention of the complex was lowered to a large extent, but that of salicylaldehyde remained almost unchanged. The polymer imprinted with the complex showed high selectivity to both the acetate and copper (II). In addition, the MIP showed an enhanced selectivity to its template compared with the polymer prepared without copper acetate.

Acetates↗

PubMed2002

Differential scanning calorimetric studies of the thermal stability of plasmid DNA complexed with cationic lipids and polymers.

The thermal stabilities of supercoiled (SC) and linear/open circular (LIN/OC) forms of plasmid DNA when complexed with cationic lipids or cationic polymers used for cellular transfection were assessed using differential scanning calorimetry. Differences in the stability of SC DNA produced by the cationic lipids DOTAP (1,2-dioleoyltrimethyl ammoniumpropane chloride), DSTAP (1,2-distearyltrimethyl ammoniumpropane chloride), and DDAB (dimethyldioctadecylammonium bromide) upon complexation suggest possible effects of headgroup structure on the stability of SC DNA and minimal effects of lipid acyl chain saturation/unsaturation. Complexation of DNA with the cationic polymers polyethylenimine (PEI) or poly-L-lysine (PLL) (but not poly-L-arginine) resulted in a decreased stability of SC DNA when the DNA was in charge excess, although all polymers stabilized SC DNA when the polymer was in charge excess. The effects of these cationic polymers on the stability of SC DNA can be explained by changes produced in the tertiary structure of SC DNA upon binding and may reflect the importance of the topological constraint of supercoiling upon the stability of the resulting complexes.

Calorimetry, Differential Scanning↗

PubMed2002

Polymers effect on estradiol partition coefficient between powdered human stratum corneum and water.

Macromolecules have gained interest as drug entities unto themselves and as transport facilitators to alter initial phases of percutaneous absorption. Two macromolecular polymers (MW 2081 and 2565) were designed to hold cosmetics and drugs to the skin surface by altering initial chemical and skin partitioning. The effect of these polymers on the partition coefficient (PC) of estradiol with powdered human stratum corneum (PHSC) and water was determined. There was no statistically significant effect on the PC when the concentration of estradiol was increased 100-fold (0.028-2.8 microg/mL), when the incubation time was increased from 0 to 24 h, or when PHSC was delipidized. The addition of a liphophilic polymer had no effect on the PC; however, the hydrophilic polymer showed a significant polymer concentration-dependent increase (p < 0.01) in log PC for estradiol concentrations. Thus, a macromolecular chemical has the potential to alter the partitioning of chemical into the outer layers of skin, the first step in percutaneous absorption.

Drug Carriers↗

PubMed2004

Increased physical stability and improved dissolution properties of itraconazole, a class II drug, by solid dispersions that combine fast- and slow-dissolving polymers.

Solid dispersions were prepared of itraconazole-Eudragit E100, itraconazole-PVPVA64, and itraconazole-Eudragit E100/PVPVA64 using a corotating twin-screw hot-stage extruder. Modulated temperature differential scanning calorimetry (MTDSC) was used to evaluate the miscibility of the extrudates, and dissolution experiments were performed in simulated gastric fluid without pepsin (SGF(sp)). Itraconazole and Eudragit E100 are miscible up to 13% w/w drug loading. From that concentration on, phase separation is observed. Pharmaceutical performance of this dispersion was satisfactory because 80% of the drug dissolved after 30 min. Extrudates of itraconazole and PVPVA64 were completely miscible but the pharmaceutical performance was low, with 45% of drug dissolved after 3 h. Combination of both polymers in different ratios, with a fixed drug loading of 40% w/w, was evaluated. MTDSC results clearly indicated a two-phase system consisting of itraconazole-Eudragit E100 and itraconazole-PVPVA64 phases. In these extrudates, no free crystalline or glassy clusters of itraconazole were observed; all itraconazole was mixed with one of both polymers. The pharmaceutical performance was tested in SGF(sp) for different polymer ratios, and Eudragit E100/PVPVA64 ratios of 50/50 and 60/40 showed significant increases in dissolution rate and level. Polymer ratios of 70/30 and 80/20, on the other hand, had a release of 85% after 30 min. Precipitation of the drug was never observed. The combination of the two polymers provides a solid dispersion with good dissolution properties and improved physical stability compared with the binary solid dispersions of itraconazole.

Drug Stability↗