SEARCH · PubMed Health

Results for “Tissue Scaffolds”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

PubMed2006

Cell proliferation in teeth reconstructed from dispersed cells of embryonic tooth germs in a three-dimensional scaffold.

Tissue engineering can now reproduce tooth from postnatal tooth cells. However, crown formation is not accurately reconstituted, even when the complex structure of the enamel dentin is reproduced. Here, we showed that a tissue-engineered (TE) tooth, exhibiting morphogenesis according to regular crown-cusp pattern formation, was produced by embryonic tooth germ cells in a three-dimensional scaffold. Heterogeneous cells dissociated from embryonic day 14 (E14) mice tooth germs were seeded on a scaffold and implanted under a kidney capsule in adult mice. The developmental process of the implants was examined for up to 14 d. At 5 d, the cells had formed initial tooth germ, followed by enamel-covered dentin tissue formed symmetrically. To study the developmental process, we examined the growth pattern using 5-bromo-2'-deoxyuridine (BrdU)-labeling analysis. The initial cell-proliferation patterns of the TE teeth were similar to that at the cap and early bell stages in natural teeth. This was particularly true in the cervical loop, which showed a similar distribution pattern of BrdU-positive cells in TE- and natural teeth. These results suggested that even when embryonic tooth germs are dissociated, the single cells can reconstitute tooth, and that enamel organ morphogenesis proceeds as in natural teeth.

Animals↗

PubMed2006

Co-electrospun poly(lactide-co-glycolide), gelatin, and elastin blends for tissue engineering scaffolds.

In this study, we describe composite scaffolds composed of synthetic and natural materials with physicochemical properties suitable for tissue engineering applications. Fibrous scaffolds were co-electrospun from a blend of a synthetic biodegradable polymer (poly(lactic-co-glycolic acid), PLGA, 10% solution) and two natural proteins, gelatin (denatured collagen, 8% solution) and alpha-elastin (20% solution) at ratios of 3:1:2 and 2:2:2 (v/v/v). The resulting PLGA-gelatin-elastin (PGE) fibers were homogeneous in appearance with an average diameter of 380 +/- 80 nm, which was considerably smaller than fibers made under identical conditions from the starting materials (PLGA, 780 +/- 200 nm; gelatin, 447 +/- 123 nm; elastin, 1060 +/- 170 nm). Upon hydration, PGE fibers swelled to an average fiber diameter of 963 +/- 132 nm, but did not disintegrate. Importantly, PGE scaffolds were stable in an aqueous environment without crosslinking and were more elastic than those made of pure elastin fibers. To investigate the cytocompatibility of PGE, we cultured H9c2 rat cardiac myoblasts and rat bone marrow stromal cells (BMSCs) on fibrous PGE scaffolds. We found that myoblasts grew equally as well or slightly better on the scaffolds than on tissue-culture plastic. Microscopic evaluation confirmed that myoblasts reached confluence on the scaffold surfaces while simultaneously growing into the scaffolds. Histological characterization of the PGE constructs indicated that BMSCs penetrated into the center of scaffolds and began proliferating shortly after seeding. Our results suggest that fibrous scaffolds made of PGE and similar biomimetic blends of natural and synthetic polymers may be useful for engineering soft tissues, such as heart, lung, and blood vessels.

Animals↗

PubMed2002

Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints.

Bone tissue engineering scaffolds must shape regenerating tissue, provide temporary mechanical support and enhance tissue regeneration. These requirements result in conflicting design goals. For example, increased temporary mechanical function requires a dense scaffold while enhanced cell/gene delivery requires a porous scaffold. This paper demonstrates an image-based homogenization optimization approach that can design scaffold microstructure, scaffold material and regenerate tissue microstructure to meet conflicting design requirements. In addition, constraints to ensure adequate cell/gene delivery can be introduced using a minimum porosity threshold. Homogenization theory was used to compute relationships between scaffold microstructure and effective stiffness. The functional relationships were used in the MATLAB optimization toolbox to compute optimal pore dimensions and scaffold material such that the scaffold and regenerate tissue effective stiffness matched that of native bone stiffness. The scaffold design was converted into STL format for solid free-form fabrication. Scaffolds were designed that matched mandibular condyle trabecular bone properties. Results showed excellent agreement between native bone properties and designed scaffold properties (all R2 > 0.89). Finally, example scaffolds were built from hydroxyapatite using a SFF casting technique.

Biocompatible Materials↗

PubMed2006

Processing and characterization of porous structures from chitosan and starch for tissue engineering scaffolds.

Natural biodegradable polymers were processed by different techniques for the production of porous structures for tissue engineering scaffolds. Potato, corn, and sweet potato starches and chitosan, as well as blends of these, were characterized and used in the experiments. The techniques used to produce the porous structures included a novel solvent-exchange phase separation technique and the well-established thermally induced phase separation method. Characterization of the open pore structures was performed by measuring pore size distribution, density, and porosity of the samples. A wide range of pore structures ranging from 1 to 400 microm were obtained. The mechanisms of pore formation are discussed for starch and chitosan scaffolds. Pore morphology in starch scaffolds seemed to be determined by the initial freezing temperature/freezing rate, whereas in chitosan scaffolds the shape and size of pores may have been determined by the processing route used. The mechanical properties of the scaffolds were assessed by indentation tests, showing that the indentation collapse strength depends on the pore geometry and the material type. Bioactivity and degradation of the potential scaffolds were assessed by immersion in simulated body fluid.

Amylopectin↗

PubMed2006

Stereological methods to assess tissue response for tissue-engineered scaffolds.

The stereological approach can provide an objective unbiased assessment of structural change in biological systems. In this review, we elucidate the basic principles of stereology and their implementation in the analysis of tissue response to tissue-engineering scaffolds. A brief outline of tissue response parameters that can be estimated using stereological approach is included. The focus is on frequently quantified parameters in tissue response, such as host tissue infiltration, inflammatory cell numbers, angiogenesis, fibrous tissue thickness, areas of calcification, and/or necrosis, among others. Special consideration is given to sampling techniques and how these techniques can influence the reliability of the obtained results as well as minimizing potential sources of bias. These basic principles are illustrated with practical examples, where measurements are performed and estimations calculated using conventional stereological techniques. As the next generation of biomaterials continue to be developed, it is essential that researchers develop a rigorous and unbiased method of performance quantification.

Animals↗

PubMed2003

Elastic biodegradable poly(glycolide-co-caprolactone) scaffold for tissue engineering.

Cyclic mechanical strain has been demonstrated to enhance the development and function of engineered smooth muscle (SM) tissues, and it would be necessary for the development of the elastic scaffolds if one wishes to engineer SM tissues under cyclic mechanical loading. This study reports on the development of an elastic scaffold fabricated from a biodegradable polymer. Biodegradable poly(glycolide-co-caprolactone) (PGCL) copolymer was synthesized from glycolide and epsilon-caprolactone in the presence of stannous octoate as catalyst. The copolymer was characterized by (1)H-NMR, gel permeation chromatography and differential scanning calorimetry. Scaffolds for tissue engineering applications were fabricated from PGCL copolymer using the solvent-casting and particle-leaching technique. The PGCL scaffolds produced in this fashion had open pore structures (average pore size = 250 microm) without the usual nonporous skin layer on external surfaces. Mechanical testing revealed that PGCL scaffolds were far more elastic than poly(lactic-co-glycolic acid) (PLGA) scaffolds fabricated using the same method. Tensile mechanical tests indicated that PGCL scaffolds could withstand an extension of 250% without cracking, which was much higher than withstood by PLGA scaffolds (10-15%). In addition, PGCL scaffolds achieved recoveries exceeding 96% at applied extensions of up to 230%, whereas PLGA scaffolds failed (cracked) at an applied strain of 20%. Dynamic mechanical tests showed that the permanent deformation of the PGCL scaffolds in a dry condition produced was less than 4% of the applied strain, when an elongation of 20% at a frequency of 1 Hz (1 cycle per second) was applied for 6 days. Moreover, PGCL scaffolds in a buffer solution also had permanent deformations less than 5% of the applied strain when an elongation of 10% at a frequency of 1 Hz was applied for 2 days. The usefulness of the PGCL scaffolds was demonstrated by engineering SM tissues in vivo. This study shows that the elastic PGCL scaffolds produced in this study could be used to engineer SM-containing tissues (e.g. blood vessels and bladders) in mechanically dynamic environments.

Absorbable Implants↗

PubMed2006

Morphological features of ovine embryonic lung fibroblasts cultured on different bioactive scaffolds.

Tissue regeneration with autologous cell transplantation is one of the most important goals in clinical research. In this field, the development of bioactive materials that provide microenvironments for cell-matrix interactions mimicking biological conditions is required. In recent years, many synthetic materials have been developed as scaffolds and many procedures for the surface modification of these materials have been applied using biological molecules. In this study, we analyzed the morphology and the molecule production by ovine embryonic lung fibroblasts cultured on three different sponge-like matrices based on poly(L-lactic acid) (PLLA): agarose/PLLA, crosslinked and uncrosslinked gelatin/PLLA. The matrices were produced by using an emulsion freeze-drying method leading to the formation of sponge-like materials with high porosity and with interconnection between the pores. In vitro MTT test demonstrated that transplanted cells were viable and metabolically active. Morphological analysis revealed that fibroblasts adhered to and penetrated the polymeric structures. Moreover, all the different matrices supported fibroblast production of proteoglycans, glycoproteins, and matrix molecules such as elastin, collagen I, and fibronectin. These data suggest that the tested bioactive scaffolds may support the growth and extracellular matrix molecule production of fibroblasts allowing in vitro connective tissue regeneration.

Animals↗

PubMed2006

Differentiation of mesenchymal stem cells into osteoblasts on honeycomb collagen scaffolds.

Tissue engineering using living cells is emerging as an alternative to tissue or organ transplantation. The adult mesenchymal stem cells can be differentiated into multilineage cells, such as adipocytes, chondrocytes, or osteoblasts when cultured with specific growth factors. In the present investigation, we have studied the effect of honeycomb collagen scaffolds for the adhesion, differentiation and proliferation of bone marrow-derived mesenchymal stem cells into osteoblasts. Mesenchymal stem cells were isolated from 6-week old albino rat femur bone marrow, and cultured in alpha-MEM medium without beta-glycerophosphate and dexamethasone. Honeycomb collagen discs were prepared from bovine dermal atelocollagen, cross-linked by UV-irradiation and sterilized by heat. The honeycomb discs were placed on the culture dishes before seeding the stem cells. The cells attached quickly to the honeycomb collagen scaffold, differentiated and proliferated into osteoblasts. The differentiated osteoblasts were characterized by morphological examination and alkaline phosphatase activity. The osteoblasts also synthesized calcium-deficient hydroxyapatite (pseudo-hydroxyapatite) crystals in the culture. The mineralization was confirmed by Von Kossa staining and the crystals were analyzed by X-ray diffraction. Light microscopy and DNA measurements showed that the differentiated osteoblasts multiplied into several layers on the honeycomb collagen scaffold. The results demonstrated that the honeycomb collagen sponge is an excellent scaffold for the differentiation and proliferation of mesenchymal stem cells into osteoblasts. The data further proved that honeycomb collagen is an effective substrate for tissue engineering applications, and is very useful in the advancing field of stem cell technology and cell-based therapy.

Alkaline Phosphatase↗

PubMedDate not supplied

Novel agmatine-containing poly(amidoamine) hydrogels as scaffolds for tissue engineering.

Novel biocompatible and biodegradable amphoteric poly(amidoamine) (PAA) hydrogels were designed for applications as scaffolds for tissue engineering. These hydrogels (PAA-AG1 and PAA-AG2) were obtained by polyaddition of 2,2-bisacrylamidoacetic acid with 2-methylpiperazine and 4-aminobutyl guanidine, a bioactive molecule with a known ability to induce adhesion to cell membranes. They contain carboxylic functions in their main chain and interchain connections deriving from two different cross-linking agents: for PAA-AG1, a multifunctional primary amine, that is, 1,10-decanediamine; for PAA-AG2, a purposely synthesized PAA (PAA-NH(2)) containing pendant NH(2). Both PAA-AG1 and PAA-AG2 proved noncytotoxic and adhesive to cell membranes, as ascertained by means of cytotoxicity and proliferation tests carried out on fibroblast cell lines. Good apparent mechanical strength was also observed in the case of PAA-AG2, cross-linked with the PAA-NH(2). Both PAA-AG1 and PAA-AG2 underwent degradation tests under controlled conditions simulating the biological environments, that is, Dulbecco medium at pH 7.4 and 37 degrees C. They completely dissolved within 10 and about 40 days, respectively. In both cases, the degradation products were completely noncytotoxic. All the results of this paper point to the conclusion that agmatine-based PAA hydrogels are excellent substrates for cell proliferation.

3T3 Cells↗

PubMed2002

Surface-modified 3D scaffolds for tissue engineering.

The aim of this work was to use sol-gel processing to develop bioactive materials to serve as scaffolds for tissue engineering that will allow the incorporation and release of proteins to stimulate cell function and tissue growth. We obtained organofunctionalized silica with large content of amine and mercaptan groups (up to 25%). The developed method can allow the incorporation and delivery of proteins at a controlled rate. We also produced bioactive foams with binary SiO(2)-CaO and ternary SiO(2)-CaO-P(2)O(5) compositions. In order to enhance peptide-material surface properties, the bioactive foams were modified with amine and mercaptan groups. These materials exhibit a highly interconnected macroporous network and high surface area. These textural features together with the incorporation of organic functionally groups may enable them to be used as scaffolds for the engineering of soft tissue.

Journal Article↗

PubMed2000

Sustained release of vascular endothelial growth factor from mineralized poly(lactide-co-glycolide) scaffolds for tissue engineering.

Strategies to engineer bone tissue have focused on either: (1) the use of scaffolds for osteogenic cell transplantation or as conductive substrates for guided bone regeneration; or (2) release of inductive bioactive factors from these scaffold materials. This study describes an approach to add an inductive component to an osteoconductive scaffold for bone tissue engineering. We report the release of bioactive vascular endothelial growth factor (VEGF) from a mineralized, porous, degradable polymer scaffold. Three dimensional, porous scaffolds of the copolymer 85 : 15 poly(lactide-co-glycolide) were fabricated by including the growth factor into a gas foaming/particulate leaching process. The scaffold was then mineralized via incubation in a simulated body fluid. Growth of a bone-like mineral film on the inner pore surfaces of the porous scaffold is confirmed by mass increase measurements and quantification of phosphate content within scaffolds. Release of 125I-labeled VEGF was tracked over a 15 day period to determine release kinetics from the mineralized scaffolds. Sustained release from the mineralized scaffolds was achieved, and growth of the mineral film had only a minor effect on the release kinetics from the scaffolds. The VEGF released from the mineralized and non-mineralized scaffolds was over 70% active for up to 12 days following mineralization treatment, and the growth of mineral had little effect on total scaffold porosity.

Biocompatible Materials↗

PubMed2005

Three-dimensional fiber-deposited PEOT/PBT copolymer scaffolds for tissue engineering: influence of porosity, molecular network mesh size, and swelling in aqueous media on dynamic mechanical properties.

Among novel scaffold fabrication techniques, 3D fiber deposition (3DF) has recently emerged as a means to fabricate well-defined and custom-made scaffolds for tissue regeneration, with 100% interconnected pores. The mechanical behavior of these constructs is dependent not only on different three-dimensional architectural and geometric features, but also on the intrinsic chemical properties of the material used. These affect the mechanics of the solid material and eventually of 3D porous constructs derived from them. For instance, poly(ethylene oxide terephthalate)-poly(butylene terephthalate) (PEOT/PBT) block copolymers are known to have mechanical properties, depending on the PEOT/PBT weight ratio in block form and on the molecular weight of the initial poly(ethylene glycol) (PEG) blocks. These differences are enhanced even more by their different swelling properties in aqueous media. Therefore, this article examines the influence of copolymer compositions in terms of their swelling on dynamic mechanical properties of solid material and porous 3DF scaffolds. The molecular weight of the starting PEG blocks used in the copolymer synthesis varied from 300 to 1000 g/mol. The PEOT/PBT weight ratio in the blocks used varied from 55/45 to 80/20. This corresponded to an increase of the swelling ratio Q from 1.06 to 2.46, and of the mesh size xi from approximately 9 Angstrom to approximately 47 Angstrom. With increased swelling, dynamic mechanical analysis (DMA) revealed a decrease in elastic response and an increase of viscoelasticity. Thus, by coupling structural and chemical characteristics, the viscoelastic properties of PEOT/PBT 3DF scaffolds may be fine tuned to achieve mechanical requirements for a variety of engineered tissues. Ultimately, the combination of 3DF and DMA may be useful to validate the hypothesis that mimicking the biomechanical behavior of a specific tissue for its optimal replacement is an important issue for at least some tissue-engineering applications.

Animals↗

PubMed2005

Tailoring the porosity and morphology of gelatin-methacrylate polyHIPE scaffolds for tissue engineering applications.

Gelatin is a natural protein with many desirable properties for application as a biomaterial, including scaffolding for tissue engineering. In this work gelatin A with a molecular weight in the range 50-100 kg mol-1 was modified with methacrylic anhydride and processed into a concentrated oil-in-water emulsion. Polymerization of the continuous phase gave rise to a polyHIPE, a porous material possessing a highly interconnected, trabecular morphology. In the paper, we focused on the goal of obtaining matrixes characterized by suitable sizes of both voids and interconnects, to allow an in depth colonization from transplanted cells. In this respect, we investigated the role of the volume percentage of the dispersed phase and the effect of additives. It was established that high pore volumes (>or=90%) are to be preferred, because they allow the production of solid foams characterized by average void and interconnect diameters of approximately 20 and 10 microm, respectively. These values are still inadequate for the intended application of these scaffolds but represent a good starting point for further improvements. These were achieved through the use of additives, namely sodium chloride and dimethyl sulfoxide, which partially destabilized the precursor emulsion and allowed a solid foam to be obtained with void and interconnect diameters in the range of 30-150 microm and 10-50 microm, respectively.

Journal Article↗

PubMedDate not supplied

Silk fibroin-polyurethane scaffolds for tissue engineering.

Silk fibroin (SF) is a highly promising protein for its surface and structural properties, associated with a good bio- and hemo-compatibility. However, its mechanical properties and architecture cannot be easily tailored to meet the requirements of specific applications. In this work, SF was used to modify the surface properties of polyurethanes (PUs), thus obtaining 2D and 3D scaffolds for tissue regeneration. PUs were chosen for their well known advantageous properties and versatility; they can be obtained either as 2D (films) or 3D (foams) substrates. Films of a medical-grade poly-carbonate-urethane were prepared by solvent casting; PU foams were purposely designed and prepared with a morphology (porosity and cell size) adequate for cell growth. PU substrates were coated with fibroin by a dipping technique. To stabilize the coating layer, a conformational change of the protein from the alpha-form (water soluble) to the beta-form (not water soluble) was induced. Novel methodology in UV spectroscopy were developed for quantitatively analyzing the SF-concentration in dilute solutions. Pure fibroin was used as standard, as an alternative to the commonly used albumin, allowing real concentration values to be obtained. SF-coatings showed good stability in physiological-like conditions. A treatment with methanol further stabilized the coating. Preliminary results with human fibroblasts indicated that SF coating promote cell adhesion and growth, suggesting that SF-modified PUs appear to be suitable scaffolds for tissue engineering applications.

Journal Article↗

PubMed2003

Seeding cells into needled felt scaffolds for tissue engineering applications.

Tissue engineering methods are under development that will enable the repair or replacement of a variety of tissues, including articular cartilage and bone. To engineer functional tissue it is necessary that scaffolds initially be seeded with a large number of cells distributed evenly throughout the scaffold structure. It previously has been shown that, compared to static seeding conditions, seeding scaffolds under dynamic conditions facilitates high seeding densities and even distributions of cells (Li et al., Biotechnology Progress 2001;17:935-944). The efficiency of seeding HOSTE85 cells and bovine chondrocytes into needled felt scaffolds following agitation at different speeds was determined. Seeding efficiency was determined using the Hoechst 33258 assay, and cell viability was assessed using the Alamar Blue trade mark assay. The distribution of cells within the scaffolds was imaged using scanning electron microscopy. It was found that the optimum seeding conditions varied for HOSTE85 cells and bovine chondrocytes, with different agitation speeds leading to different seeding efficiencies, cell viabilities, and distributions of cells within scaffolds. The optimum agitation speeds for seeding a high number of viable cells into scaffolds so that they were arranged evenly were 300 rpm for HOSTE85 cells and 200 rpm for bovine chondrocytes.

Animals↗

PubMed2001

A honeycomb collagen carrier for cell culture as a tissue engineering scaffold.

As a three-dimensional carrier for cell culture, a honeycomb structure cell scaffold was created from atelopeptide collagen Types I, II, and III. The diameter of the honeycomb pores ranged from 100 to 1,000 microm. The depth of the pores was from 10 to 3,000 mm. The scaffold was elastic and hard. Creation of various shapes was easy, and these shapes were easily maintained. Human fibroblasts, CHO-K1, BHK-21, and bovine endothelial cells were cultured with the scaffold. The growth curves of these cells were satisfactory. These results suggest that this carrier is a suitable scaffold for cell culture and will be useful as a three-dimensional tissue engineering scaffold.

Animals↗

PubMed2004

Diffusion in musculoskeletal tissue engineering scaffolds: design issues related to porosity, permeability, architecture, and nutrient mixing.

The field of tissue engineering continues to advance with the discovery of new biomaterials, growth factors and scaffold fabrication techniques. However, for the ultimate success of a tissue engineered construct the issue of nutrient transport to the scaffold interior needs to be addressed. Often, the requirements for adequate nutrient supply are at odds with other scaffold design parameters such as mechanical properties as well as scaffold fabrication techniques, leading to incongruities in finding optimal solutions. The goal of this review article is to provide an overview of the various engineering design factors that promote movement of nutrients, waste and other biomolecules in scaffolds for musculoskeletal tissue engineering applications. The importance of diffusion in scaffolds and how it is influenced by porosity, permeability, architecture, and nutrient mixing has been emphasized. Methods for measuring porosity and permeability have also been outlined. The different types of biomaterials used, scaffold fabrication techniques implemented and the pore sizes/porosities obtained over the past 5 years have also been addressed.

Animals↗

PubMed2005

Smart materials as scaffolds for tissue engineering.

In this review, we focused our attention on the more important natural extracellular matrix (ECM) molecules (collagen and fibrin), employed as cellular scaffolds for tissue engineering and on a class of semi-synthetic materials made from the fusion of specific oligopeptide sequences, showing biological activities, with synthetic materials. In particular, these new "intelligent" scaffolds may contain oligopeptide cleaving sequences specific for matrix metalloproteinases (MMPs), integrin binding domains, growth factors, anti-thrombin sequences, plasmin degradation sites, and morphogenetic proteins. The aim was to confer to these new "intelligent" semi-synthetic biomaterials, the advantages offered by both the synthetic materials (processability, mechanical strength) and by the natural materials (specific cell recognition, cellular invasion, and the ability to supply differentiation/proliferation signals). Due to their characteristics, these semi-synthetic biomaterials represent a new and versatile class of biomimetic hybrid materials that hold clinical promise in serving as implants to promote wound healing and tissue regeneration.

Animals↗