SEARCH · PubMed Health

Results for “ATMOSPHERE”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources

PubMed2006

Changes in elemental composition and mass of atmospheric aerosol pollution between 1996 and 2002 in a Central European city.

Median atmospheric concentrations of Pb, Br, S, As, Se, and particulate matter (PM) decreased, and median concentrations of Sb, Cu, Zn, Fe, Ca, Cr and Ba increased in urban aerosol in downtown Budapest between 1996 and 2002. The changes in Pb and Br concentrations were unambiguously attributed to the phasing out of leaded gasoline. The increments were mainly related to and explained by non-exhaust vehicular emissions. The mechanical wear of asbestos-free brake linings of road vehicles contributed to the concentration of Cu and Sb on average by 69% and 66%, respectively in the PM10 size fraction. Tire rubber abrasion was a major source for atmospheric Zn; on average, non-crustal sources accounted for 67% of Zn in the PM10 size fraction. Contribution of the tire wear component to the PM10 mass was estimated to be 6% at most, while its contribution to organic aerosol was of the order of 15%.

Air Pollutants↗

PubMed2006

Atmospheric concentration characteristics and gas-particle partitioning of PCBs in a rural area of eastern Germany.

Atmospheric concentrations of polychlorinated biphenyls (PCBs) were measured in 14 successive daytime and nighttime air samples collected from Melpitz, a rural site in eastern Germany. The average total concentration of PCBs was 110+/-80 pg m-3 and they were predominately present in the gas phase (approximately 95%). Composition of individual congeners closely resembled those of Clophen A30 and Aroclor 1232. Partial vapor pressures of PCBs were well correlated with temperature and the steep slopes obtained from Clausius-Clapeyron plots (-4500 to -8000) indicated that evaporation from adjacent land surfaces still controls the atmospheric levels of these pollutants. Particle-gas partitioning coefficients (KP) of PCBs were well correlated with the respective sub-cooled vapor pressures (PLo), but the slopes obtained from logKP versus logPLo plots (-0.16 to -0.59) deviated significantly from the expected value of -1. Overall, gas-particle partitioning of PCBs was better simulated by Junge-Pankow than octanol/air partition coefficient-based model.

Agriculture↗

PubMed2004

Effects of temperature, atmosphere and pH on the generation of smoke compounds during tobacco pyrolysis.

The pyrolysis of tobacco under a variety of conditions was performed to examine the generation profiles of 29 known toxic compounds in tobacco smoke (hydrogen cyanide, benzo[a]pyrene, aldehydes, volatile organic compounds, phenolics, aromatic amines, etc.). The generation profiles of smoke compounds varied according to three conditions: the pyrolysis temperature (300-1000 degrees C), the pyrolysis atmosphere (in nitrogen and air) and pH of the tobacco leaf (2.89-7.07). Most of the smoke compounds (28 compounds) were generated primarily at temperatures less than 800 degrees C. More than half of the smoke compounds (17 compounds) were unaffected by the type of atmosphere, and seven compounds were significantly affected by pH. These results can provide basic and useful information to further study on the formation mechanisms and the technology involved in the control of smoke generation.

Hot Temperature↗

PubMed2006

Metabolite production of yeasts on a strawberry-agar during storage at 7 degrees C in air and low oxygen atmosphere.

Changes of different quality factors of strawberries have been described until now from a physiological point of view. Possible effects on quality caused by yeast proliferation have not been described. To elucidate the metabolic activity of yeasts (i.e. Debaryomyces melissophilus, Rhodotorula glutinis, Cryptococcus laurentii), isolated from strawberries, they were inoculated on a simulation medium of strawberries (strawberry-agar). Their activity was measured by analysing and correlating microbiological counts, metabolite concentration in the headspace as well as in the medium, and sugar consumption. The isolated yeasts from strawberries could grow on the strawberry-agar, both under air conditions and modified atmosphere (MA) conditions. The maximum count for the yeasts reached 7.5-8.5 log cfu cm(-2) (air conditions) and 5.6-6.4 log cfu cm(-2) (MA conditions). Production or consumption of a number of compounds could be detected when microbial counts reached levels between 4.7 log cfu cm(-2) and 8.5 log cfu cm(-2) depending on species and atmospheric conditions. A range of volatile organic compounds, produced by the yeasts, was detected: acetone, ethyl acetate, ethanol, isopropyl acetate, ethyl butyrate, 1-propanol, 2-methyl-1-propanol, 1-butanol, 2-methyl-1-butanol, 3-methyl-1-butanol, 1-hexanol and hexyl acetate. These compounds are able to influence the sensory properties of strawberries. A simultaneous decrease in sugar concentrations (sucrose, glucose, fructose) was observed. When ethanol reached high concentrations, ethyl acetate and ethyl butyrate were produced. This production can be attributed to a detoxification of ethanol by yeasts. The fermentative metabolism of yeasts during aerobic conditions could be explained by the Crabtree effect. As the detected volatile organic compounds produced by yeasts are also found in fresh strawberries, it can be concluded that these compounds are produced both by microbiological and physiological processes.

Colony Count, Microbial↗

PubMed2005

Correlations between growth parameters of spoilage micro-organisms and shelf-life of pork stored under air and modified atmosphere at -2, 4 and 10 degrees C.

The correlations of the growth parameters (the initial cell number (N(0)), maximum cell number (N(max)), maximum specific growth rate (mu(max)), lag-phase (lambda)) of typical spoilage micro-organisms (lactic acid bacteria (LAB), coliforms, pseudomonads, Brochothrix thermosphacta) growing on sliced pork to the sensory shelf-life and microbial shelf-life were investigated. The changes in sensory quality and proliferation of micro-organisms on pork shoulder were studied at different atmosphere conditions (air and 40%CO(2)/59%N(2)/1%O(2)) and temperatures (-2, 4 and 10 degrees C). Microbial counts were fitted to the modified-Gompertz equation to obtain the growth parameters of different micro-organisms. B. thermosphacta and coliforms were predominant bacteria associated with spoilage of pork under all temperatures and air conditions. However, pseudomonads could only dominate under regular atmosphere condition. Using multiple linear regression, high correlations were found between the lag-time (lambda) of LAB (0.9814, 0.9830), B. thermosphacta (0.9895, 0.9849), or the maximum specific growth rate (mu(max)) of coliforms (-0.9583, -0.9695) and the microbial shelf-life and sensory shelf-life, respectively. The mu(max) and lambda of micro-organisms correlated well with microbial and sensory shelf-life. The shelf-life of pork is mainly correlated with the growth parameters of mu(max) and lambda than by N(max).

Animals↗

PubMed2004

Atmospheric oxygen and other conditions affecting the production of cereulide by Bacillus cereus in food.

Factors influencing the production of cereulide, the emetic toxin of Bacillus cereus in food and laboratory media were investigated, using liquid chromatography-ion trap mass spectrometry and sperm motility inhibition bioassay for detection and quantitation. Oxygen was essential for production of the emetic toxin by B. cereus. When beans, rice or tryptic soy broth were inoculated with cereulide producing strains B203, B116 (recent food isolates) or the strain F-4810/72, high amounts (2 to 7 microg ml(-1) or g(-1) wet wt) of cereulide accumulated during 4-day storage at room temperature. In parallel cultures and foods, stored under nitrogen atmosphere (> 99.5% N2), less than 0.05 microg of cereulide ml(-1) or g(-1) wet wt accumulated. The outcome of the bioassay matched that of the chemical assay, with no indication of interference by substances in the rice or beans. Boiling for 20 to 30 min did not inactivate cereulide or cereulide producing strains in rice or the beans. Adding l-leucine and l-valine (0.3 g l(-1)) stimulated cereulide production 10- to 20-fold in R2A and in rice water agar. When the B. cereus strains were grown on agar media under permissive conditions (air, room temperature), cereulide was produced overnight with little or no increase when the incubation was extended to 4 days. In broth culture, the production of cereulide started later than 16-24 h. Anoxic storage prevented cereulide production also when the amino acids had been supplied. Packaging with modified atmosphere low in oxygen may thus be used to reduce the risk of cereulide formation during storage of food.

Bacillus cereus↗

PubMed2006

Volatile metabolite production of spoilage micro-organisms on a mixed-lettuce agar during storage at 7 degrees C in air and low oxygen atmosphere.

This paper describes the volatile metabolite production of spoilage bacteria (Pantoea agglomerans and Rahnella aquatilis) and spoilage yeasts (Pichia fermentans and Cryptococcus laurentii), previously isolated from mixed lettuce, on a simulation medium of shredded mixed lettuce (mixed-lettuce agar) both under air conditions and modified atmosphere (MA)-conditions at 7 degrees C. These latter conditions simulated the equilibrium modified atmosphere packaging, which is used to extend the shelf-life of shredded mixed lettuce. Besides volatile metabolites, organic acid metabolites and consumption of sugars were measured. Microbiological growth on the mixed-lettuce agar resulted in metabolite production and consumption of sugars. Bacteria and yeasts produced a range of volatile organic compounds both under air conditions and MA-conditions: ethanol, ethyl acetate, 2-methyl-1-propanol, 2-methyl-1-butanol, 3-methyl-1-butanol, 2,3-butanedione, 3-methyl-1-pentanol, 1-butanol and 1-hexanol. Under MA-conditions, 2-methyl-1-butanol, 3-methyl-1-butanol and ethanol were the first compounds that were detected in the headspace as being produced by the inoculated micro-organisms. In the case of the yeast P. fermentans, production of these compounds was detected from a count of 5.0+/-0.1 log cfu/cm(2) with a fast increase when exceeding 6.0-6.5 log cfu/cm(2). Unlike P. fermentans, the yeast C. laurentii showed a slow metabolism under MA-conditions, compared to air conditions. In the case of the bacteria, production of 2-methyl-1-butanol and 3-methyl-1-butanol was detected starting from a count of 6.7+/-0.1 log cfu/cm(2) in the case of R. aquatilis and from a count of 7.1+/-0.4 log cfu/cm(2) in the case of P. agglomerans with a fast increase when exceeding 8 log cfu/cm(2). No production of ethanol by the bacteria under MA-conditions was detected in contradiction to air conditions. It could be concluded that, if these counts are reached on the cut surfaces of shredded mixed lettuce which are simulated by the mixed-lettuce agar, sensorial quality of shredded mixed lettuce could be influenced by the microbiological production of metabolites.

Bacteria↗

PubMed2006

The influence of modified atmospheres and their interaction with water activity on the radial growth and fumonisin B(1) production of Fusarium verticillioides and F. proliferatum on corn. Part I: the effect of initial headspace carbon dioxide concentration.

The effect of modified atmospheres on the growth and fumonisin B(1) production of Fusarium verticillioides and Fusarium proliferatum on corn is presented in a series of two papers. In this, the first part, the effect of initial headspace (IH) carbon dioxide concentration and its interaction with water activity (a(w)) on growth and fumonisin B(1) production was evaluated. It was observed that at all a(w) values studied, increase in the IH CO(2) concentration generally resulted in a decrease in the colony growth rate (g, mm day(-1)) and maximum colony diameter (D(max), mm) and an increase in the lag phase duration (lambda, day). Although both a(w) and IH CO(2) concentration had significant and synergistic effects on g, a(w) had the largest effect. As little as 10% IH CO(2) completely inhibited the production of fumonisin B(1) by F. verticillioides. F. proliferatum was more resistant and required 40, 30 and 10% IH CO(2) at a(w) 0.984, 0.951 and 0.930, respectively, to completely inhibit fumonisin B(1) production. These results demonstrate that modified atmospheres containing high CO(2) levels could potentially be employed for the protection of corn from fungal spoilage and mycotoxin contamination during the post-harvest period.

Carbon Dioxide↗

PubMed2006

The influence of modified atmospheres and their interaction with water activity on the radial growth and fumonisin B(1) production of Fusarium verticillioides and F. proliferatum on corn. Part II: The effect of initial headspace oxygen concentration.

This paper is the second in a series of two that describe the effect of modified atmospheres on the growth and mycotoxin production of Fusarium verticillioides and Fusarium proliferatum on corn. In this part, the effect of initial headspace (IH) oxygen concentration and its interaction with water activity (a(w)) on growth and fumonisin B(1) production was investigated. In addition, the impact of vacuum packaging and in-cooperation of O(2) scrubbing sachets was also studied. It was observed that at all a(w) values studied, reduction of IH O(2) concentration from 20 to 2% had no significant effect on the colony growth rate (g, mm d(-1)) and lag phase duration (lambda, d). However, g and lambda were positively and negatively correlated to a(w). The IH O(2) concentration was determined to have a a(w) dependent effect on the oxygen consumption rate. Although the maximum colony diameter (D(max), mm) decreased with the reduction of the IH O(2) level, the greatest mycelial density occurred at 10% IH O(2) for both isolates. This observation was accompanied by a trend of a decrease in the value of the IH O(2) level at which the most fumonisin B(1) was produced from 15 to 5% when the a(w) was decreased from 0.976 to 0.930 for F. verticillioides. For F. proliferatum the optimum conditions for fumonisin B(1) production shifted from 20% at a(w) 0.976 to 10% at both 0.951 and 0.930. Vacuum packaging and the in-cooperation of O(2) absorbing sachets completely inhibited the growth of both isolates. These results together with those reported in Part I of the study indicate that O(2) should preferably be completely excluded from modified atmospheres that are employed to protect stored corn from fungal growth and mycotoxin production.

Colony Count, Microbial↗

PubMed2004

The importance of both charge exchange and proton transfer in the analysis of polycyclic aromatic compounds using atmospheric pressure chemical ionization mass spectrometry.

The response of atmospheric pressure chemical ionization (APCI) mass spectrometry to selected polycyclic aromatic compounds (PACs) was examined in a Micromass Quattro atmospheric pressure ion source as a function of both solvents and source gases. Typical PACs found in petroleum samples were represented by mixtures of naphthalene, fluorene, phenanthrene, pyrene, fluoranthene, chrysene, triphenylene, perylene, carbazole, dibenzothiophene, and 9-phenanthrol. A large range of different gases in the APCI source was studied, with emphasis on nitrogen, air, and carbon dioxide. Solvents used included water-acetonitrile, acetonitrile, dichloromethane, and hexanes. The signal responses were dependent on both the gases and solvents used, as was the ionization mechanism, as indicated by the degree of protonation with respect to the level of charge exchange. The combination of carbon dioxide in the nebulizer gas stream with nitrogen in the other streams gave a three- to fourfold better sensitivity than using nitrogen alone for both test mixtures and for complex samples.

Journal Article↗

PubMed2004

Quantitation of lanosterol and its major metabolite FF-MAS in an inhibition assay of CYP51 by azoles with atmospheric pressure photoionization based LC-MS/MS.

Azoles affect the steroid balance in all biological systems and may therefore be called endocrine disrupters. Lanosterol 14alpha-demethylase (CYP51) is an enzyme inhibited by azoles. Only few data have been reported showing their inhibitory potency since an assay in an in vitro system is not available so far. In the present work an inhibition assay using human recombinant CYP51, coexpressed with human P450 oxido-reductase by the baculovirus/insect cell expression system, and LC-MS/MS as analytical method is described. Atmospheric pressure photoionization (APPI) and atmospheric pressure chemical ionization (APCI) sources were used with a triple quadrupole mass spectrometer to compare quantitation of lanosterol (substrate) and 4,4-dimethyl-5alpha-cholesta-8,14,24-triene-3beta-ol (FF-MAS) (product of CYP51) with d(6)-2,2,3,4,4,6-cholesterol (d(6)-cholesterol) as internal standard. Optimization of analytical parameters resulted in a LC-APPI-MS/MS method with a LOQ of 10 pg on column for FF-MAS. The sensitivity of the method (LOD 0.5 ng/ml) makes it possible to analyze supernatants of inhibition experiments after precipitation of proteins by isopropanol without any sample enrichment. The coefficient of variation of the analytical method was <20% (n = 5) for FF-MAS, lanosterol and d(6)-cholesterol. The external calibration curve was linear from 1 to 10,000 ng/ml with R(2) >/= 0.999 and an accuracy of 94-115%. Compared with APCI, APPI provides a ten- to 500-fold increase in sensitivity for the analytes in this study. IC(50) values of epoxiconazole and miconazole-two widely used azole fungicides used in agriculture and in human medicine, respectively-were 1.95 microM and 0.057 microM.

Azoles↗

PubMed2005

Separation of sodiated isobaric disaccharides and trisaccharides using electrospray ionization-atmospheric pressure ion mobility-time of flight mass spectrometry.

A series of isobaric disaccharide-alditols, four derived from O-linked glycoproteins, and select trisaccharides were rapidly resolved using tandem high resolution atmospheric pressure ion-mobility time-of-flight mass spectrometry. Electrospray ionization was used to create the gas-phase sodium adducts of each carbohydrate. Using this technique it was possible to separate up to three isobaric disaccharide alditols and three trisaccharides in the gas phase. Reduced mobility values and experimentally determined ion-neutral cross sections are reported for each sodium-carbohydrate complex. These studies demonstrated that ion mobility separations at atmospheric pressure can provide a high-resolution dimension for analysis of carbohydrate ions that is complementary to traditional mass spectral (m/z) ion analysis. Combining these independent principles for separation of ions provides a powerful new bioanalytical tool for the identification of isomeric carbohydrates.

Disaccharides↗

PubMed2005

Novel CFCs-substitutes recommended by EPA (hydrofluorocarbon-245fa and hydrofluoroether-7100): ion chemistry in air plasma and reactions with atmospheric ions.

The ion chemistry of the title compounds, a nonafluorobutyl methyl ether and a hydrofluoropropane, is elucidated by a combination of studies using atmospheric pressure ionization mass spectrometry and triple quadrupole mass spectrometry. In the positive ion mode, the hydrofluoroether readily forms an [M - F]+ ion, attributable to hydronium ion induced dehydrofluorination, the product of which can be further hydrated to give a protonated hydrofluoroester. By contrast, the hydrofluoropropane does not react with the hydronium ion but rather gives hydrofluoroalkenylium cations via H atom and F atom abstraction by the dioxygen radical cation. In the negative ion mode, the fluorobutyl methyl ether undergoes dissociative electron capture with O2-*, O2-*(H2O), O3-*, and NO2- to generate the fluorobutoxy anion, which can dissociate by CF2[doublebond]O loss to give the perfluorocarbanion when the precursor ions are internally excited. The hydrofluoropropane reacts readily with common atmospheric anions to form molecular complexes with F-, O2-*, and O3-* and the strongly H-bonded species, O2-*(HF) and F-(HF). Interestingly, isomeric pentafluoropropanes form in the reaction with O2-*, either O2-*(HF) or F-(HF), depending on the specific pattern of the fluoro substitution.

Air↗

PubMed2005

Effect of atmospheric-pressure plasma on adhesion characteristics of polyimide film.

In this work, the effect of atmospheric-pressure plasma treatments on surface properties of polyimide film are investigated in terms of X-ray photoelectron spectroscopy (XPS), contact angles, and atomic force microscopy (AFM). The adhesion characteristics of the film are also studied in the peel strengths of polyimide/copper film. As experimental results, the polyimide surfaces treated by plasma lead to an increase of oxygen-containing functional groups or the polar component of the surface free energy, resulting in improving the adhesion characteristics of the polyimide/copper foil. Also, the roughness of the film surfaces, confirmed by AFM observation, is largely increased. These results can be explained by the fact that the atmospheric-pressure plasma treatment of polyimide surface yields several oxygen complexes in hydrophobic surfaces, which can play an important role in increasing the surface polarity, wettability, and the adhesion characteristics of the polyimide/copper system.

Journal Article↗

PubMed2004

The geographic distribution of radionuclide deposition across the continental US from atmospheric nuclear testing.

For the first time, calculations for the more than 3000 counties of the US have been completed that estimate the average deposition density (Bq m(-2)) of more than 40 radionuclides in fallout from atmospheric nuclear weapons tests conducted in the US (1951-1962) and 19 radionuclides from tests conducted elsewhere in the world (1952-1963). The geographic pattern of deposition across the US, as well as the amount of fallout deposited, varied significantly depending on whether the tests were conducted within or outside of the US. Fallout deposited from the Nevada Test Site (NTS) varied geographically as a result of dispersion and dilution in the atmosphere, the wind patterns following each test, and the occurrence of localized rainfall events. In general, states immediately east of the NTS received the highest deposition from tests conducted there. In contrast, the variation in deposition across the country from global fallout was less than for NTS fallout primarily reflecting variations in annual precipitation across larger regions. Hence, in the eastern and mid-western US, where rainfall is above the national average, higher levels of global fallout were deposited than in the more arid southwestern states. This paper presents a summary of the methods used and findings of our studies on fallout from NTS and global fallout, with emphasis on two of the most important radionuclides, (131)I and (137)Cs.

Cesium Radioisotopes↗

PubMed2005

Reconstruction of (131)I radioactive contamination in Ukraine caused by the Chernobyl accident using atmospheric transport modelling.

The evaluation of (131)I air and ground contamination field formation in the territory of Ukraine was made using the model of atmospheric transport LEDI (Lagrangian-Eulerian DIffusion model). The (131)I atmospheric transport over the territory of Ukraine was simulated during the first 12 days after the accident (from 26 April to 7 May 1986) using real aerological information and rain measurement network data. The airborne (131)I concentration and ground deposition fields were calculated as the database for subsequent thyroid dose reconstruction for inhabitants of radioactive contaminated regions. The small-scale deposition field variability is assessed using data of (137)Cs detailed measurements in the territory of Ukraine. The obtained results are compared with available data of radioiodine daily deposition measurements made at the network of meteorological stations in Ukraine and data of the assessments of (131)I soil contamination obtained from the (129)I measurements.

Air Movements↗

PubMed2006

Particle size distributions of oil mists in workplace atmospheres and their exposure concentrations to workers in a fastener manufacturing industry.

This study was set out to characterize size distributions of oil mists in three workplace atmospheres of the forming, threading, and heat treatment in a fastener manufacturing industry and to assess their exposures to workers. Particle size segregating samplings were conducted on the workplace atmospheres of the three selected industrial processes by using the modified Marple 8-stage cascade impactor (m-Marple). We found that mass median aerodynamic diameter (MMAD) of the fine mode and coarse mode fell to the range 0.309-0.501 microm and 8.16-13.0 microm, respectively. The fractions of inhaled particles exposed to different regions of the respiratory tracts found that the alveolar region was consistently higher than both head and tracheobronchial regions in all three studied exposure groups. Personal inhalable oil mist samplings were conducted on workers in the three selected processes revealed their exposure levels as: threading workers (2.11 mg/m3)>forming workers (1.58 mg/m3)>heat treatment workers (0.0801 mg/m3). The estimated respirable exposure concentrations for both forming and threading workers (1.34 mg/m3 and 1.40 mg/m3, respectively) were higher than the level known for "increased risk of pulmonary injury" (0.20 mg/m3) suggesting that appropriate control measures should be taken to reduce their exposures to the oil mists of the respirable fraction immediately.

Aerosols↗

PubMed2005

High-performance liquid chromatography-atmospheric pressure chemical ionisation-mass spectrometry determination of zaleplon in human plasma.

A sensitive and specific liquid chromatography-atmospheric pressure chemical ionisation-mass spectrometry (LC-APCI-MS) method has been developed and validated for the identification and quantification of zaleplon in human plasma using estazolam as an internal standard (IS). After the addition of estazolam and 2.0 M sodium hydroxide solution, plasma samples were extracted with ethyl acetate and then the organic layer was evaporated to dryness. The reconstituted solution of the residue was injected onto a prepacked Shim-pack VP-ODS C18 (250 mm x 2.0 mm i.d.) column and chromatographed with a mobile phase comprised of methanol:water (70:30) at a flow-rate of 0.2 ml/min. Detection was performed on a single quadrupole mass spectrometer by selected ion monitoring (SIM) mode via atmospheric pressure chemical ionization (APCI) source. The mean standard curve was linear (r = 0.9991) over the concentration range of 0.2-100 ng/ml and had good back-calculated accuracy and precision. The intra-day and inter-day precisions were within 10% relative standard deviation and accuracy ranged from 85% to 115%. The limit of detection was 0.1 ng/ml. The validated LC-APCI-MS method has been used successfully to study zaleplon pharmacokinetic, bioavailability and bioequivalence in 18 adult volunteers.

Acetamides↗