SEARCH · PubMed Health

Results for “Biodegradation”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources

PubMed1992

Biodegradation of soil humic acids by Streptomyces viridosporus.

Biodegradation of soil humic acids by Streptomyces viridosporus ATCC 39115 growing in a mineral salts--glucose medium was demonstrated. This biodegradation accompanies bacterial growth and is, therefore, presumed to be a primary metabolic activity, but humic acids were not used as the sole source of carbon. This bacterial activity was enhanced when cells were shaken and within a pH range of 6.5-8.5. In further experiments, the relative abilities of S. viridosporus to mineralized [14C]melanoidin, used as synthetic humic acid, were also established. In contrast to the white rot fungus Phanerochaete chrysosporium, another microorganism exhibiting humic acid degrading activity at acidic pH, poor extracellular activities were found in culture medium of S. viridosporus, and veratryl alcohol does not result in increased humic acid degradation. In spite of some peroxidase activity measured in culture filtrates and analyzed by polyacrylamide gel electrophoresis, the humic acid degrading system of S. viridosporus, in these experimental conditions, seems to be cell associated.

Biodegradation, Environmental↗

PubMed1995

Biodegradation of cyclic and substituted linear oligomers of poly(3-hydroxybutyrate).

Cyclic oligo(3-hydroxybutyrate), oligo(3-HB), was synthesized and purified, resulting in oligolides that contained three to seven (R)-3-hydroxybutyrate units (triolides up to heptolides). In addition, linear 3-HB octamers obtained as either tert-butyl or methyl esters were substituted with different end groups at the hydroxy end. The hydroxy terminus was replaced by either a benzyloxy, trifluoroacetoxy, crotonyloxy (S)-3-hydroxybutyryloxy, or fluorenylmethylcarbonyloxy (FMOC) group. P(3-HB) hairpin loops occurred on the surface of certain regions of the polymer, especially of lamellar crystallites. Cyclic 3-HB oligomers provide a model system for these loops. It is assumed that they provide attachment points for the depolymerizing enzymes. All of the (R)-oligolides tested were degraded except the (R)-triolide. Triolides were not degraded, suggesting that enzymatic attack was prevented presumably by steric hindrance on the rigid ring system. Unsubstituted linear octamers were degraded. Biodegradation was prevented when the hydroxy terminus was protected by the FMOC group, but was not dependent on a free hydroxy terminal group; all other protecting groups did not prevent degradation. Substitution of the carboxy end of a methyl or tert-butyl ester group did not influence biodegradation.

Biodegradation, Environmental↗

PubMed2003

Biodegradation of Maya crude oil fractions by bacterial strains and a defined mixed culture isolated from Cyperus laxus rhizosphere soil in a contaminated site.

Ten bacterial strains were isolated by enrichment culture, using as carbon sources either aliphatics or an aromatic-polar mixture. Oxygen uptake rate was used as a criterion to determine culture transfer timing at each enrichment stage. Biodegradation of aliphatics (10,000 mg L(-1)) and an aromatic-polar mixture (5000 mg L(-1), 2:1) was evaluated for each of the bacterial strains and for a defined culture made up with a standardized mixture of the isolated strains. Degradation of total hydrocarbons (10,000 mg L(-1)) was also determined for the defined mixed culture. Five bacterial strains were able to degrade more than 50% of the aliphatic fraction. The most extensive biodegradation (74%) was obtained with strain Bs 9A, while strains Ps 2AP and UAM 10AP were able to degrade up to 15% of the aromatic-polar mixture. The defined mixed culture degraded 47% of the aliphatics and 6% of the aromatic-polar mixture. The defined mixed culture was able to degrade about 40% of the aliphatic fraction and 26% of the aromatic fraction when grown in the presence of total hydrocarbons, while these microorganisms did not consume the polar hydrocarbons fraction. The proposed strategy that combines enrichment culture together with oxygen uptake rate allowed the isolation of bacterial strains that are able to degrade specific hydrocarbons fractions at high consumption rates.

Arthrobacter↗

PubMed1995

Biodegradation of nitroaromatic compounds.

Nitroaromatic compounds are released into the biosphere almost exclusively from anthropogenic sources. Some compounds are produced by incomplete combustion of fossil fuels; others are used as synthetic intermediates, dyes, pesticides, and explosives. Recent research revealed a number of microbial systems capable of transforming or biodegrading nitroaromatic compounds. Anaerobic bacteria can reduce the nitro group via nitroso and hydroxylamino intermediates to the corresponding amines. Isolates of Desulfovibrio spp. can use nitroaromatic compounds as their source of nitrogen. They can also reduce 2,4,6-trinitrotoluene to 2,4,6-triaminotoluene. Several strains of Clostridium can catalyze a similar reduction and also seem to be able to degrade the molecule to small aliphatic acids. Anaerobic systems have been demonstrated to destroy munitions and pesticides in soil. Fungi can extensively degrade or mineralize a variety of nitroaromatic compounds. For example, Phanerochaete chrysosporium mineralizes 2,4-dinitrotoluene and 2,4,6-trinitrotoluene and shows promise as the basis for bioremediation strategies. The anaerobic bacteria and the fungi mentioned above mostly transform nitroaromatic compounds via fortuitous reactions. In contrast, a number of nitroaromatic compounds can serve as growth substrates for aerobic bacteria. Removal or productive metabolism of nitro groups can be accomplished by four different strategies. (a) Some bacteria can reduce the aromatic ring of dinitro and trinitro compounds by the addition of a hydride ion to form a hydride-Meisenheimer complex, which subsequently rearomatizes with the elimination of nitrite. (b) Monooxygenase enzymes can add a single oxygen atom and eliminate the nitro group from nitrophenols. (c) Dioxygenase enzymes can insert two hydroxyl groups into the aromatic ring and precipitate the spontaneous elimination of the nitro group from a variety of nitroaromatic compounds. (d) Reduction of the nitro group to the corresponding hydroxylamine is the initial reaction in the productive metabolism of nitrobenzene, 4-nitrotoluene, and 4-nitrobenzoate. The hydroxylamines undergo enzyme-catalyzed rearrangements to hydroxylated compounds that are substrates for ring-fission reactions. Potential applications of the above reactions include not only the biodegradation of environmental contaminants, but also biocatalysis and synthesis of valuable organic molecules.

Aerobiosis↗

PubMed1994

Biodegradable microspheres containing a colchicine analogue inhibit DNA synthesis in vascular smooth muscle cells.

BACKGROUND: Smooth muscle cell proliferation plays a major role in the genesis of restenosis after angioplasty or vascular injury. Local application of agents capable of modulating vascular responses, including smooth muscle cell proliferation, has been achieved, but difficulty in maintaining active levels locally has been a factor limiting the efficacy of such approaches. One strategy to maintain adequate levels is the local delivery of microspheres that release active agents over sustained time periods. METHODS AND RESULTS: We incorporated a colchicine analogue into biodegradable microspheres composed of a lactic acid/glycolic acid copolymer and characterized their drug release behavior as well as their effects on bovine aortic smooth muscle cells (BASMCs) in culture. Drug release was evaluated by spectrophotometric assay. Drug effects on DNA synthesis were measured by thymidine incorporation after addition of serum to subconfluent cells synchronized by serum withdrawal as well as in asynchronous cell populations. Polymeric microspheres incorporating 10% to 17% drug by weight and averaging 6 microns in size were found to release the colchicine analog in buffered saline solutions over more than several weeks. Drug-loaded particles inhibited DNA synthesis completely, with EC50 values ranging from 0.001 to 0.005 g% (wt/wt). Morphological changes suggesting microtubule depolymerization were observed after drug particle treatment, with similar EC50 values. Microspheres allowed to contact the cell surface demonstrated effects similar to those seen with microspheres suspended in the nutrient medium by porous polycarbonate filters, at EC50 values approximately fivefold lower. In contrast, control microspheres composed only of polymer with no incorporated active drug demonstrated no observable toxicity to BASMCs and < 40% inhibition of thymidine incorporation even in suspensions containing up to 0.5 g% particles. CONCLUSIONS: Biodegradable microspheres were fashioned that release a colchicine analogue and inhibit DNA synthesis in smooth muscle cells. Drug-loaded polymeric particles are candidates for local delivery at sites of arterial injury to decrease restenosis.

Animals↗

PubMed1996

Local intraluminal infusion of biodegradable polymeric nanoparticles. A novel approach for prolonged drug delivery after balloon angioplasty.

BACKGROUND: Several perfusion balloon catheters are under investigation for local drug delivery; however, sustained tissue drug levels are difficult to achieve with these techniques. To overcome this problem, sustained-release, biodegradable nanoparticles represent a potential alternative for prolonged local delivery. METHODS AND RESULTS: A biodegradable polylactic-polyglycolic acid (PLGA) copolymer was used to formulate nanoparticles. Fluorescent-labeled nanoparticles were intraluminally administered in a single, 180-second infusion after balloon injury in the rat carotid model. Localization and retention at different time points and biocompatibility of nanoparticles were evaluated. To evaluate the potential of the system in the prevention of neointimal formation, dexamethasone was incorporated into the particles and delivered locally as above. Nanoparticles were seen in the three layers of the artery at 3 hours and 24 hours. At 3 days, they were mainly present in the adventitial layer, decreasing at 7 days, with no fluorescent activity at 14 days. The PLGA nanoparticles appeared to be fully biocompatible. In the dexamethasone nanoparticle study, a significant amount of dexamethasone was present in the treated segment for up to 14 days after a single infusion, with no plasma levels detected after the first 3 hours. There was a 31% reduction in intima-media ratio in animals treated with local dexamethasone nanoparticles compared with control. CONCLUSIONS: Nanoparticles successfully penetrated into the vessel wall and persisted for up to 14 days after a short, single intraluminal infusion. Local administration of nanoparticles with incorporated dexamethasone significantly decreased neointimal formation. This methodology appears to have important potential for clinical applications in local drug delivery.

Angioplasty, Balloon, Coronary↗

PubMed2002

Interaction of human chondrocytes and NIH/3T3 fibroblasts on chloric acid-treated biodegradable polymer surfaces.

It has been recognized that adhesion and proliferation of cells on biodegradable polymers such as poly(lactic acid) (PLA), poly(glycolic acid) (PGA), and poly(lactide-co-glycolide) (PLGA) depend on the surface properties. The chloric acid (CA) treatment of these films was developed to increase surface wettability and to improve adhesion and proliferation of human chondrocytes and NIH/3T3 fibroblasts. The CA-treated films were characterized by the measurement of water contact angle, electron spectroscopy for chemical analysis (ESCA), and scanning electron microscopy (SEM). The changes of the film surface water contact angle gradually decreased with increase of CA treatment time, owing to the oxygen-based functional groups incorporated on the surface by CA treatment and were in the order PGA > PLGA > PLA due to the number of methyl group on the backbone chain. In ESCA analysis, as CA treatment time increased, the carbon (binding energy, approximately 285 eV) ratio decreased in film surfaces, whereas the oxygen (approximately 532 eV) ratio increased. The human chondrocytes from articular cartilage and mouse NIH/3T3 fibroblasts adhered for 1 day and grown for 2 days on the CA-treated films were counted and observed by SEM. As the surface wettability increased, the number of cells adhered and grown on the surface increased. In conclusion, this study demonstrated that the surface wettability of the biodegradable polymer plays an important role for cell adhesion and proliferation behavior for the application of the tissue engineering.

3T3 Cells↗

PubMed2003

Synthesis and characterization of poly(L-lysine)-g-poly(D,L-lactic-co-glycolic acid) biodegradable micelles.

A series of amphipathic graft copolymers composed of poly(L-lysine) (PLL) as the cationic polymer backbone and biodegradable poly(D,L-lactic-co-glycolic acid) (PLGA) as the grafting chains were synthesized and characterized. The terminal group of PLGA was activated and chemically conjugated to the primary epsilon-amine groups of PLL to produce PLL-g-PLGA copolymers. PLL-g-PLGA formed a self-assembling micelle structure in aqueous solution. The micelle size ranged from 69.4 to 149.6 nm in diameter, depending on the grafting percentage of PLGA. Upon increasing the number of PLGA chains grafted onto the PLL backbone, the size of the micelles gradually decreased, at the same time lowering their critical micelle concentration. The micelles were individually separated and had a spherical geometry, as observed by atomic force microscopy (AFM). These PLL-g-PLGA copolymers can be applied as cell adhesive surface coating materials for biodegradable tissue engineering scaffolds and can be used as non-viral DNA carriers for gene therapy.

Biocompatible Materials↗

PubMed2005

Biodegradable poly(terephthalate-co-phosphate)s: synthesis, characterization and drug-release properties.

To develop biodegradable polymers with favorable physicochemical and biological properties, we have synthesized a series of poly(terephthalate-co-phosphate)s using a two-step poly-condensation. The diol 1,4-bis(2-hydroxyethyl) terephthalate was first reacted with ethylphosphorodichloridate (EOP), and then chain-extended with terephthaloyl chloride (TC). Incorporation of phosphate into the poly(ethylene terephthalate) backbone rendered the co-polymers soluble in chloroform and biodegradable, lowered the Tg, decreased the crystallinity and increased the hydrophilicity. With an EOP/TC molar feed ratio of 80: 20, the polymer exhibited good film-forming property, yielding at 86.6 +/- 1.6% elongation with an elastic modulus of 13.76 +/- 2.66 MPa. This polymer showed a favorable toxicity profile in vitro and good tissue biocompatibility in the muscular tissue of mice. In vitro the polymer lost 21% of mass in 21 days, but only 20% for up to 4 months in vivo. It showed no deterioration of properties after sterilization by gamma-irradiation at 2.5 Mrad on solid CO2. Release of FITC-BSA from the microspheres was diffusion-controlled and exceeded 80% completion in two days. Release of the hydrophobic cyclosporine-A from microspheres was however much more sustained and near zero-ordered, discharging 60% in 70 days. A limited structure-property relationship has been established for this co-polymer series. The co-polymers became more hydrolytically labile as the phosphate component (EOP) was increased and the side chains were switched from the ethoxy to the methoxy structure. Converting the methoxy group to a sodium salt further increased the degradation rate significantly. The chain rigidity as reflected in the Tg values of the co-polymers decreased according to the following diol structure in the backbone: ethylene glycol > 2-methylpropylene diol > 2,2-dimethylpropylene diol. The wide range of physicochemical properties obtainable from this co-polymer series should help the design of degradable biomaterials for specific biomedical applications.

Animals↗

PubMed1995

In vitro and in vivo evaluation of progesterone implants based on new biodegradable poly(glutamic and glutamate esters) copolymers.

New biodegradable polypeptidic copolymers of glutamic acid and tert-butyloxycarbonylmethyl glutamate were evaluated as implantable drug delivery systems. Three copolymers varying in degrees of esterification, which is inversely proportional to the number of glutamic residues, were selected for their range of hydrophilicity and biodegradation rates. Progesterone-containing implants were then prepared by means of an extrusion process and both in vitro and in vivo evaluations were performed. The effects of drug loading, nature, and pH of release medium were investigated. In vitro/in vivo correlations were established for some types of implants. Finally, mathematical fitting of the data, using published models, helped to better understand the mechanisms governing release.

Animals↗

PubMed1995

In vitro study of biodegradation of a Co-Cr alloy using a human cell culture model.

The evaluation of a potential biomaterial is based on two approaches: firstly, the study of the local and systemic effects of the biomaterial implanted in the host; and secondly the study of the behaviour of the biomaterial itself with increasing time. The progress achieved in human cell culturing allows in vitro evaluation of a new biomaterial using the human cell(s) system(s) characteristic of the tissue which it will be exposed to in vivo. This kind of approach permits the assessment of the biodegradation of a biomaterial whatever it is: metal; alloy; ceramic; glass; polymer; with or without specialized coating.... The experimental approach is as follows: discs representative of the biomaterial (surface state, cleaning, sterilization process) are manufactured in order to cover the bottom of the culture wells. Thereafter, they are either brought in the presence of complete culture medium alone, or in the presence of a subconfluent cell layer. A kinetic analysis is performed using various incubation periods at 37 degrees C. Released biodegradation products are identified and quantified, in both the medium and cell compartment, and on the other hand cytotoxicity is assessed. A Co-Cr alloy was studied over a 9-day period according to the experimental schedule, and showed a higher corrosion rate in the presence of osteoblasts in the range of 25-30%. Moreover, an intracellular uptake of both Cr and Co was detected, which will have physiological importance.

Biocompatible Materials↗

PubMed1996

New biodegradable oligoesters for pharmaceutical application.

Tartaric acid, malic acid, and glyceric acid were copolycondensed with glycolic acid at various molar ratios in feed to quickly synthesize biodegradable oligoesters. They were likely to have a moderately cross-linked structure with relatively low molecular weights and hydrophilic groups on the chains. In addition to macroscopic gels which were insoluble in any solvents, we could obtain the oligoesters which were insoluble in water but soluble in N,N-dimethylformamide. The degradation rate of the oligoesters was higher than that of lactic acid (LA) oligomers having molecular weights of a few thousands. On the contrary, their glass transition and flow temperatures were much higher than those of LA oligomers, indicating that their handling during the preparation of drug delivery dosage forms was much improved. The formulation of microspheres containing drugs from the oligoesters revealed that they were useful as biodegradable matrices having high degradation rates.

Antineoplastic Agents↗

PubMed1997

Synthesis and characterization of biodegradable polyrotaxane as a novel supramolecular-structured drug carrier.

Polyrotaxanes were synthesized as novel biodegradable polymers with supramolecular assembly and their properties evaluated in vitro. The synthesis of biodegradable polyrotaxanes consists of three steps: preparation of an inclusion complex consisting of alpha-cyclodextrins (alpha-CDs) and amino-terminated poly(ethylene glycol) (PEG); introduction of L-phenylalanine (L-Phc) at each complex terminal via peptide linkages: and hydroxypropylation of alpha-CDs in the polyrotaxanes. Succinimide ester of benzyloxycarbonyl-L-Phe was condensed with the terminal amino groups of the inclusion complex. 1H-NMR and GPC results showed that alpha-CDs were threaded onto a PEG chain and L-Phe moieties were introduced at each terminal of the PEG chain. Further, the amount of threaded alpha-CDs was found to be governed by the molecular weight of PEG. The hydroxypropylation of alpha-CDs improved the solubility of the polyrotaxanes in PBS (pH 7.4). The hydroxypropylated (HP-) polyrotaxanes were characterized by terminal peptide cleavage using papain. In vitro degradation of HP-polyrotaxanes revealed that HP-alpha-CDs threaded onto a PEG chain were released only when terminal peptide linkages were cleaved. Moreover, threaded HP-alpha-CDs onto a PEG chain was found to be completely released. Kinetics of terminal peptide cleavage were also evaluated by catalytic efficiency (kcat/K(m)). The kcat/K(m) values were found to be independent of the molecular weight of HP-polyrotaxanes but to be affected by terminal hydrophobic moieties. It is proposed that our designed polyrotaxanes are feasible as novel drug carriers.

Biocompatible Materials↗

PubMed1999

Effect of acetylation of biodegradable polyrotaxanes on its supramolecular dissociation via terminal ester hydrolysis.

Acetylation of biodegradable polyrotaxanes was examined to estimate the effect on its supramolecular dissociation via terminal ester hydrolysis. The biodegradable polyrotaxanes, in which many alpha-cyclodextrins (alpha-CD) are threaded onto a poly(ethylene glycol) chain capped with L-phenylalanine via ester linkages, were acetylated using acetic anhydride; alpha-CD release behavior was then characterized by in vitro hydrolysis. The degree of acetylation was changed by the concentration of acetic anhydride and the reaction time. The results of the in vitro hydrolysis indicate that the critical degree of acetylation to prolong supramolecular dissociation lies at around 30%. The terminal hydrolysis proceeded completely even with 100% of acetylation. These findings suggest that the hydrophobization of alpha-CDs in the polyrotaxane makes it possible to delay the time to complete the supramolecular dissociation. The hydrophobization of the polyrotaxane is of great importance for designing implantable materials that maintain their supramolecular structure until tissue regeneration with complete terminal hydrolysis.

Acetic Anhydrides↗

PubMed1999

Adhesion behaviours of hepatocytes cultured onto biodegradable polymer surface modified by alkali hydrolysis process.

Rat hepatocytes were cultured onto the surface of various amorphous biodegradable polymers composed of lactic acid and glycolic acid which were partially surface hydrolyzed by treating with sodium hydroxide. The polymer surface progressively became more hydrophilic with increasing NaOH treatment time, which was confirmed by measuring water contact angles and XPS results. The number of hepatocytes attached onto the NaOH treated hydrophilic surfaces was greater than that of the non-treated control surface. The extent of hepatocytes adhesion onto the surface-modified poly(D,L-lactic-co-glycolic acid, 85/15) depended on the NaOH treatment time. Under the optimal conditions of lactic/glycolic composition in the polymer and the surface hydrolysis time, the adhesion of hepatocytes were comparable or even better than the collagen-coated biodegradable polymer surface used as a control.

Animals↗

PubMed2005

Recent advances in biodegradable nanocomposites.

There is growing interest in developing bio-based products and innovative process technologies that can reduce the dependence on fossil fuel and move to a sustainable materials basis. Biodegradable bio-based nanocomposites are the next generation of materials for the future. Renewable resource-based biodegradable polymers including cellulosic plastic (plastic made from wood), corn-derived plastics, and polyhydroxyalkanoates (plastics made from bacterial sources) are some of the potential biopolymers which, in combination with nanoclay reinforcement, can produce nanocomposites for a variety of applications. Nanocomposites of this category are expected to possess improved strength and stiffness with little sacrifice of toughness, reduced gas/water vapor permeability, a lower coefficient of thermal expansion, and an increased heat deflection temperature, opening an opportunity for the use of new, high performance, lightweight green nanocomposite materials to replace conventional petroleum-based composites. The present review addresses this green material, including its technical difficulties and their solutions.

Alkanes↗

PubMed1994

Sustained release of antimicrobials in the middle ear using a biodegradable support.

The ototoxicity of a poly-L-lactic acid biodegradable support incorporating a therapeutically releasable amount of ampicillin was studied. This device has a shape that allows placement in the middle ear via a myringotomy incision. Once in the middle ear, it expands without mechanical interference and provides extended release of ampicillin. In vitro studies documented sustained release of ampicillin, and in vivo efficacy was demonstrated in otitis media induced in chinchillas and cats. Previous histopathologic studies showed a lack of inflammatory reaction from the device itself and documented its biodegradable characteristics. There was no evidence of ototoxicity on morphometry of the organ of Corti (hair cell counts) in chinchillas exposed to these devices for 3 weeks with and without ampicillin.

Ampicillin↗

PubMed2002

Biodegradable polymer (D,L-lactide-epsilon-caprolactone) in aortic vascular prosthesis: morphological evaluation in an animal model.

Biodegradable D,L-Lactide-epsilon-caprolactone copolymer was used in substitution to bovine collagen to seal porosity in nine Dacron vascular Sorin Carbografts. One served as control and 8 were implanted in mini-pigs as vascular by-pass in the thoracic aorta. The grafts were explanted at 7 days (4 animals), 30 (2 animals) and at 90 days (2 animals), and submitted to gross examination, X-ray, histology and electron microscopy. Aim of the study was to assess the safety and the reliability of these polyester vascular prostheses impregnated with the copolymer in terms of containment of the bleeding in the perioperative period, host inflammatory response, copolymer biodegradation and prostheses "healing" All the grafts were patent at angiographic and X-ray examination. At 7 days blood infiltration between Dacron and copolymer lining was detected. Inflammatory granulocyte infiltrates and granulomatous reaction with polymer degradation was observed at 30 days and fibrous tissue healing at 90 days. Luminal surface was covered by thin thrombi at 7 and by a neointima at 30 and 90 days. We conclude that D,L-Lactide-epsilon-caprolactone copolymer is effective in preventing perigraft bleeding, even though an early hematoma between Dacron and the copolymer coating occurs. Copolymer is degraded through a mild inflammatory reaction, with eventual evolution to fibrous healing.

Angiography↗