SEARCH · PubMed Health

Results for “Scattering, Small Angle”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources

PubMed2004

Five-component food-grade microemulsions: structural characterization by SANS.

In this paper we present the structural characterization of a five-component food-grade microemulsion containing Tween 80, R(+)-limonene, ethanol, glycerol, and water. Our main approach to investigating the microstructure of dense microemulsions, and how it can be influenced by the various components, was to employ small-angle neutron scattering and the new evaluation technique for dense, interacting systems, the Generalized Indirect Fourier Transformation. We started our investigation with the impact of glycerol and ethanol on Tween 80 micelles in water. We found that glycerol increases the aggregation number and withdraws the hydrating agents from the headgroup region of the surfactant, resulting in a higher packing density of molecules in a micelle at slightly increasing size. The same trend holds when the micelles are oil swollen and/or ethanol is present. Ethanol, on the other hand, redistributes mainly between water and the interface-headgroup region of the surfactant. Part of it replaces surfactant molecules in the micelles, which increases the available interface and results in a higher number of micelles with shrinking size. The same trend holds when the micelles are oil swollen and/or glycerol is present in the aqueous phase. We also investigated samples along the dilution of a mixture of surfactant and oil phase (R(+)-limonene and ethanol), which can be diluted with aqueous phase (mixture of water and glycerol) without the occurrence of phase separation. In some samples of this dilution most probably bicontinuous structures are present. To elucidate this point, we also employed dynamic light scattering, viscosity, and conductivity measurements.

Journal Article↗

PubMed2004

Angstrom-to-millimeter characterization of sedimentary rock microstructure.

Backscatter SEM imaging and small-angle neutron scattering (SANS) data are combined within a statistical framework to quantify the microstructure of a porous solid in terms of a continuous pore-size distribution spanning over five orders of magnitude of length scale, from 10 A to 500 microm. The method is demonstrated on a sample of natural sandstone and the results are tested against mercury porosimetry (MP) and nuclear magnetic resonance (NMR) relaxation data. The rock microstructure is fractal (D=2.47) in the pore-size range 10 A-50 microm and Euclidean for larger length scales. The pore-size distribution is consistent with that determined by MP. The NMR data show a bimodal distribution of proton T(2) relaxation times, which is interpreted quantitatively using a model of relaxation in fractal pores. Pore-length scales derived from the NMR data are consistent with the geometrical parameters derived from both the SEM/SANS and MP data. The combined SANS/BSEM method furnishes new microstructural information that should facilitate the study of capillary phenomena in hydrocarbon reservoir rocks and other porous solids exhibiting broad pore-size distributions.

Journal Article↗

PubMed2004

Synthesis, characterization, and SANS studies of novel alkanediyl-alpha,omega-bis(hydroxyethylmethylhexadecylammonium bromide) cationic gemini surfactants.

A series of novel gemini cationic surfactants alkanediyl-alpha,omega-bis (hydroxyethylmethylhexadecylammonium bromide) with polymethylene spacer chain length of 4, 6, 8, and 10 carbon atoms was synthesized and characterized. Critical micellar concentrations of the gemini surfactants in aqueous solutions as determined by the surface tension and conductance measurements were observed to be in the range 1.39-3.63 microM. The critical micellar concentration was observed to increase initially with spacer length up to 6 methylene groups and to decrease thereafter with the increase in spacer length. The micellar microstructure in aqueous solutions examined through small angle neutron scattering (SANS) revealed that the extent of aggregation growth and variation in shapes of micelles strongly depend on head group polarity, spacer chain length, and temperature. The propensity to micellar growth with spacer chain length 4 was found to be much higher than with the longer spacer lengths. The fractional charge on the micelle increases with increased spacer chain length and temperature.

Cations↗

PubMed2005

Unusual micellar properties of multiheaded cationic surfactants in the presence of strong charge neutralizing salts.

The aggregation properties of single-chain surfactants bearing one (H1), two (H2), and three (H3) trimethylammonium head groups have been studied by small-angle neutron scattering (SANS). Growth of aggregates was observed to decrease dramatically with an increase in the number of head groups in the surfactants. The micelles grow progressively smaller with every increase in the number of head groups of the surfactants. Aggregation number (N) continuously decreases and the fractional charge (alpha) gradually increases with the increase in the number of head groups. The semiminor axis (a) and semimajor axis (b=c) of the micelle decrease strongly with the increase in the number of head groups. In the case of H1, dramatic micellar growth is observed on addition of salts such as KBr and sodium salicylate, but this type of micellar growth is not observed in the cases of H2 and H3 when the above salts are added to their micellar solutions. Aggregation number and size of the micelles remain almost the same, even after addition of KBr at a concentration as high as 100 mM. This observation with multiheaded cationic surfactants is unusual. Clearly, the charge density at the head group level of surfactants markedly influences their micellar aggregation properties.

Journal Article↗

PubMed2005

Asphaltenic aggregates are polydisperse oblate cylinders.

Small-angle neutron scattering (SANS) has proven to be very useful for deducing the sizes and morphologies of asphaltenic aggregates in solution. A wide variety of intra-particle structure factors have previously been applied to SANS scattering spectra, but the studies often provided limited information concerning the quality of the fits and the Q range over which the models were applied. Selection of an appropriate form factor that closely approximates the structure of asphaltenic aggregates is important for determining the properties of asphaltenic aggregates, such as the radius of gyration (R(G)), molar mass, and apparent fractal dimension. This study evaluates various mono- and polydisperse intra-particle structure factor models as applied to four asphaltene scattering spectra. Agreement of the model fit parameters (I(0) and R(G)) with those obtained from Guinier analyses suggests that such a form factor model is physically reasonable. Reduced chi2 values for each non-linear least squares fit indicates how well a given model fits to the entire Q range studied for the scattering intensity distribution. In the polydispersity analyses, an analytical function is introduced to model the scattering behavior of oblate cylinders with a Schultz distribution of radii. Results indicate that the polydisperse radius oblate cylinder model best approximates the shape of asphaltenic aggregates.

Journal Article↗

PubMed2005

A novel viscoelastic system from a cationic surfactant and a hydrophobic counterion.

The phase behavior of 2-hydroxy-1-naphthoic acid (2,1-HNC) mixed with cetyltrimethylammonium hydroxide (CTAOH) is reported. This novel system is compared with the published one of 3-hydroxy-2-naphthoic acid (3,2-HNC) mixed with CTAOH. We investigated the phase behavior and properties of the phases in aqueous solutions of 100 mM CTAOH with 2,1-HNC. In both systems a multilamellar vesicle phase is formed when the naphthoate/surfactant ratio (r) reaches unity. When an increasing amount of 2,1-HNC is mixed with a micellar solution of 100 mM CTAOH, an isotropic low-viscous micellar solution, a viscoelastic gel (consisting of rodlike micelles), a turbid region (two-phase region), and a viscoelastic liquid crystalline gel (consisting of multilamellar vesicles, MLV) were formed. The vesicular phase is highly viscoelastic and has a yield stress value. The transition from the micellar to the vesicle phase occurs for CTAOH/2,1-HNC over a two-phase region, where micelles and vesicles coexist. Also it was noticed that 2,1-HNC is dissolved in 100 mM CTAOH until the naphthoate/surfactant ratio reaches approximately 1.5, and the liquid crystalline phases were found to change their color systematically when they were viewed between two crossed polarizers. The vesicles have been characterized by differential interference contrast microscopy, freeze-fracture electron microscopy, and cryo-electron microscopy (cryo-TEM). The vesicles were polydisperse and their diameter ranged from 100 to 1000 nm. The interlamellar spacing between the bilayers was determined with small angle neutron scattering and agrees with the results from different microscopical methods. The complex viscosity rises by six orders of magnitude when rodlike micelles are formed. The complex viscosity decreases again in the turbid region, and then rises approximately six orders of magnitude above the water viscosity. This second rising is due to the formation of the liquid crystalline MLV phase.

Journal Article↗

PubMed2005

Micellar copolymerization of associative polymers: study of the effect of acrylamide on sodium dodecyl sulfate-poly(propylene oxide) methacrylate mixed micelles.

Mixed micelles of sodium dodecyl sulfate (SDS) and poly(propylene oxide) methacrylate (PPOMA) have been studied in the presence of acrylamide using conductimetry, fluorescence spectroscopy, and small-angle neutron scattering (SANS) under the following conditions: (i) the SDS-acrylamide binary system in water; (ii) the SDS-acrylamide-PPOMA ternary system in water. The addition of acrylamide in SDS solutions perturbs the micellization of the surfactant by decreasing the aggregation number of the micelles and increasing their ionization degree. The variations of the various micellar parameters versus the weight ratio R=PPOMA/SDS are different in the presence of acrylamide or in pure water. These differences are much more pronounced for the lower than for the higher PPOMA concentrations. There is competition between acrylamide and PPOMA and at higher PPOMA concentration, acrylamide tends to be released from SDS micelles and is completely replaced by PPOMA.

Acrylamide↗

PubMed2005

Concentration, temperature, and salt-induced micellization of a triblock copolymer Pluronic L64 in aqueous media.

The effect of copolymer concentration, temperature, and sodium halides (NaI, NaBr, NaCl, and NaF) on micellization and micellar properties of a poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) amphiphilic copolymer (Pluronic L64: EO13PO30EO13), was examined by different methods such as dye spectral change, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), small angle neutron scattering (SANS), dynamic light scattering (DLS), viscosity, and cloud point (CP). Temperature/polymer concentration/salt dependent aggregation behavior of L64 was observed. The data on critical micelle concentration (CMC), critical micelle temperature (CMT), (CP), micelle size, and shape are reported. The Fourier transform infrared (FTIR) showed temperature dependent changes in C-O-C stretching variation band towards higher wave numbers and broadening of band width during the micellization process; this was attributed to increase in proportion of the anhydrous methyl groups, while the proportion of the hydrated methyl groups was decreased. Differential scanning calorimetry (DSC) provides CMTs and CPs from the same experiment. CMC values derived from dye spectral change, decrease significantly with the addition of salt. The increases in salt/copolymer concentration lower the onset temperature of micellization (CMT). Halide anions influence both CMT and CP in the order of F- > Cl- > Br- > I- when total salt and copolymer concentration kept constant. SANS results show the increase of inter-micellar interaction due to the increase in temperature/salt concentration; this is supported by viscosity data.

Calorimetry, Differential Scanning↗

PubMed2005

Effects of the number of fatty acid residues on the phase behaviors of decaglycerol fatty acid esters.

The effects of the number of fatty acid residues (n) in decaglycerol fatty acid esters, i.e., decaglycerol laurates (abbreviated to (C11)nG10), on the phase behaviors of three laurate esters, (C11)1.9G10, (C11)2.7G10, and (C11)3.4G10, were investigated. The unreacted decaglycerol remaining in each ester was removed by liquid extraction before use. (C11)1.9G10 formed hexagonal liquid crystals in aqueous solutions, while (C11)2.7G10 and (C11)3.4G10, which are more hydrophobic than (C11)1.9G10, formed lamellar liquid crystals. The cloud point in aqueous solution was measured for mixtures of these three esters. The cloud phenomenon was observed when the weight ratio of hydrophilic groups to the total surfactant (WH/WS) was around 0.6. The cloud point shifted to a markedly higher temperature, even with a slight increase in the WH/WS ratio. The solubilization abilities of (C11)nG10 for the oils m-xylene and (R)-(+)-limonene were also examined. When the WH/WS ratio was between 0.60 and 0.64, (C11)nG10 formed microemulsions and lyotropic liquid crystals in the presence of water and the oils. These self-organized structures were stable, even above 90 degrees C. It is concluded that the phase behavior of (C11)nG10 are insensitive to temperature, but strongly dependent on both the WH/WS ratio and the number of fatty acid residues (n).

Emulsions↗

PubMed2006

Morphology of hybrid polystyrene-block-poly(ethylene oxide) micelles: analytical ultracentrifugation and SANS studies.

Morphology and structure of aqueous block copolymer solutions based on polystyrene-block-poly(ethylene oxide) (PS-b-PEO) of two different compositions, a cationic surfactant, cetyl pyridinium chloride (CPC), and either platinic acid (H2PtCl6.6H2O) or Pt nanoparticles were studied using a combination of analytical ultracentrifugation (AUC), transmission electron microscopy (TEM), and small angle neutron scattering (SANS). These studies combining methods contributing supplemental and analogous structural information allowed us to comprehensively characterize the complex hybrid systems and to discover an isotope effect when H2O was replaced with D2O. In particular, TEM shows formation of both micelles and larger aggregates after incorporation of platinic acid, yet the amount of aggregates depends on the H2PtCl6.6H2O concentration. AUC reveals the presence of micelles and micellar clusters in the PS-b-PEO block copolymers solution and even larger (supermicellar) aggregates in hybrids (with CPC). Conversely, SANS applied to D2O solutions of the similar species indicates that micelles are spherical and no other micellar species are found in block copolymer solutions. To reconcile the SANS and AUC data, we carried out AUC examination of the corresponding D2O block copolymer solutions. These measurements demonstrate a pronounced isotope effect on micelle aggregation and micelle size, i.e., no micelle aggregation in D2O solutions, revealing good agreement of AUC and SANS data.

Calorimetry, Differential Scanning↗

PubMed2004

Effect of pre-hydrolysis on floc structure.

Morphological changes in flocs were elucidated by small-angle light scattering, free settling tests and microscopic observation to determine the effects of pre-hydrolysis (alkaline treatment and ultrasonication) on two sludges--primary raw sludge from the Malabar Sewage Treatment Plant, Sydney (sludge M) and biological sludge collected at the nitrogen removal unit of St Marys Sewage Treatment Plant in Sydney (sludge S). Ultrasonication or alkaline treatment released a marked amount of insoluble organic matter in a soluble form. The latter treatment was more efficient than the former. Meanwhile, the pre-hydrolyzed flocs had more compact structures than the original ones, as shown by their higher free-settling fractal dimension, lower areal porosity and smaller internal pores. In particular, alkaline treatment yielded flocs with more compact interiors than did ultrasonication. Such detailed structural information could not be elicited by monitoring the change in floc size. The greater resistance to mass transfer of the hydrolyzed flocs thus produced does not reduce the efficiency of subsequent digestion, indicating that the surface reaction rate on the solid surface might have dominated since the pre-hydrolysis steps modified the local chemical environment to promote digestion.

Bioreactors↗

PubMed2005

Negative regulation of AAA + ATPase assembly by two component receiver domains: a transcription activation mechanism that is conserved in mesophilic and extremely hyperthermophilic bacteria.

Only a few transcriptional regulatory proteins have been characterized in extremely hyperthermophilic organisms, and most function as repressors. Structural features of the NtrC1 protein from the hyperthermophilic bacterium Aquifex aeolicus suggested that this protein functions similarly to the sigma(54)-polymerase activator DctD of Sinorhizobium meliloti. Here, we demonstrate that NtrC1 is an enzyme that hydrolyzes ATP to activate initiation of transcription by sigma(54)-holoenzyme. New structural data, including small-angle solution scattering data and the crystal structure of the phosphorylated receiver domain, show that NtrC1 uses a signal transduction mechanism very similar to that of DctD to control assembly of its AAA+ ATPase domain. As for DctD, the off-state of NtrC1 depends upon a tight dimer of the receiver domain to repress oligomerization of an intrinsically competent ATPase domain. Activation of NtrC1 stabilizes an alternative dimer configuration of the receiver domain that is very similar to the on-state dimers of the DctD and FixJ receiver domains. This alternative dimer appears to relieve repression of the ATPase domain by disrupting the off-state dimerization interface along the helical linker region between receiver and ATPase domains. Bacterial enhancer binding proteins typically have two linker sequences, one between N-terminal regulatory and central ATPase domains, and one between the central ATPase and C-terminal DNA binding domains. Sequence analyses reveal an intriguing correlation between the negative regulation mechanism of NtrC1 and DctD, and a structured N-terminal linker and unstructured C-terminal one; conversely, the very different, positive mechanism present in NtrC protein occurs in the context of an unstructured N-terminal linker and a structured C-terminal one. In both cases, the structured linkers significantly contribute to the stability of the off-state dimer conformation. These analyses also raise the possibility that a structured linker between N-terminal regulatory and central output domains is used frequently in regulatory proteins from hyperthermophilic organisms.

Adenosine Triphosphatases↗

PubMed2005

Molecular dynamics characterization of n-octyl-beta-D-glucopyranoside micelle structure in aqueous solution.

n-Octyl-beta-D-glucopyranoside (OG) is a non-ionic glycolipid, which is used widely in biotechnical and biochemical applications. All-atom molecular dynamics simulations from two different initial coordinates and velocities in explicit solvent have been performed to characterize the structural behaviour of an OG aggregate at equilibrium conditions. Geometric packing properties determined from the simulations and small angle neutron scattering experiment state that OG micelles are more likely to exist in a non-spherical shape, even at the concentration range near to the critical micelle concentration (0.025 M). Despite few large deviations in the principal moment of inertia ratios, the average micelle shape calculated from both simulations is a prolate ellipsoid. The deviations at these time scales are presumably the temporary shape change of a micelle. However, the size of the micelle and the accessible surface areas were constant during the simulations with the micelle surface being rough and partially elongated. Radial distribution functions computed for the hydroxyl oxygen atoms of an OG show sharper peaks at a minimum van der Waals contact distance than the acetal oxygen, ring oxygen, and anomeric carbon atoms. This result indicates that these atoms are pointed outwards at the hydrophilic/hydrophobic interface, form hydrogen bonds with the water molecules, and thus hydrate the micelle surface effectively.

Computer Simulation↗

PubMed2003

Flocculation in mixtures of cationic polyelectrolytes and anionic surfactants.

The phase behavior of mixtures of a cationic polyelectrolyte ('Jaguar') and an anionic surfactant (either sodium dodecyl sulfate or sodium lauryl ether sulfate) has been studied. For a given polyelectrolyte (and added NaCl) concentration, with increasing surfactant concentration, three phase regions were identified. The first region is a single homogeneous phase. Within this region, at some surfactant concentration, above the critical aggregation concentration, stable open-network 'particles' form, typically approximately 100 nm in size, which are net positively charged. However, as the surfactant concentration is increased further, these particles aggregate and form a two-phase system, i.e. a separated gel phase, containing a high percentage of water, co-existing with an aqueous surfactant phase. At some higher surfactant concentration still, the particles become sufficiently negatively charged that they re-stabilize. Beyond this surfactant concentration, therefore, the system reverts to being a single, homogeneous phase. Within the two-phase (aggregated particle) region an iso-electric point for the particles has been observed at a certain surfactant concentration, by electrophoresis. Furthermore, in this aggregated, gel-phase region, there appear to be typically approximately 2-4 surfactant molecules associated with each cationic site of the polymer chains. It is postulated that association of the anionic surfactant molecules occurs within the polyelectrolyte chains, binding them together, to form the particles referred to. These associated surfactant structures have been referred to here as 'internal' micelles. A crude estimate has been made, based on turbidity/time measurements, that there may be up to approximately 1000 polymer chains in each primary particle, bound together by the internal surfactant micelles. Small-angle light scattering studies of the aggregating particles indicate a fractal dimension for the aggregates, which would correspond to a diffusion-limited aggregation process.

Anions↗

PubMed2000

An overview of polymer latex film formation and properties.

The literature on polymer latex film formation has grown enormously in recent times--driven by the need to find alternatives for solvent-based systems with their adverse environmental impacts. Although greater insight has been shown by the use of modern instrumental techniques such as small angle neutron scattering, direct non-radiative energy transfer and atomic force microscopy, the actual mechanisms involved in deforming spherical particles into void-free films are still the subject of controversy and debate. Surfactant-free homopolymer model colloid latices, favoured in academic studies, together with latices containing surfactants whose redistribution can influence film properties, and the more complex copolymer, blended, core-shell and pigmented systems needed to satisfy a full range of film properties are all considered.

Latex↗

PubMed2002

Component and state separation in DMPC/DSPC lipid bilayers: a Monte Carlo simulation study.

In this paper a two-state, two-component, Ising-type model is used to simulate the lateral distribution of the components and gel/fluid state acyl chains in dimyristoylphosphatidylcholine/distearoylphosphatidylcholine (DMPC/DSPC) lipid bilayers. The same model has been successful in calculating the excess heat capacity curves, the fluorescence recovery after photobleaching (FRAP) threshold temperatures, the most frequent center-to-center distances between DSPC clusters, and the fractal dimensions of gel clusters (Sugar, I. P., T. E. Thompson, and R. L. Biltonen, 1999. Biophys. J. 76:2099-2110). Depending on the temperature and mole fraction the population of the cluster size is either homogeneous or inhomogeneous. In the inhomogeneous population the size of the largest cluster scales with the size of the system, while the rest of the clusters remain small with increasing system size. In a homogeneous population, however, every cluster remains small with increasing system size. For both compositional and fluid/gel state clusters, threshold temperatures-the so-called percolation threshold temperatures-are determined where change in the type of the population takes place. At a given mole fraction, the number of percolation threshold temperatures can be 0, 1, 2, or 3. By plotting these percolation threshold temperatures on the temperature/mole fraction plane, the diagrams of component and state separation of DMPC/DSPC bilayers are constructed. In agreement with the small-angle neutron scattering measurements, the component separation diagram shows nonrandom lateral distribution of the components not only in the gel-fluid mixed phase region, but also in the pure gel and pure fluid regions. A combined diagram of component and state separation is constructed to characterize the lateral distribution of lipid components and gel/fluid state acyl chains in DMPC/DSPC mixtures. While theoretical phase diagrams of two component mixtures can be constructed only in the case of first-order transitions, state and component separation diagrams can be constructed whether or not the system is involved in first-order transition. The effects of interchain interactions on the component and state separation diagrams are demonstrated on three different models. The influences of state and component separation on the in-plane and off-plane membrane reactions are discussed.

Biophysical Phenomena↗

PubMed2002

Dimensions of plectonemically supercoiled DNA.

With a view to determine the configuration and regularity of plectonemically supercoiled DNA, we have measured the small angle neutron scattering from pUC18 plasmid in saline solutions. Furthermore, we have derived the mathematical expression for the single chain scattering function (form factor) of a superhelical structure, including the longitudinal and transverse interference over the plectonemic pitch and radius, respectively. It was found that an interwound configuration describes the data well, provided interactions among supercoils are accounted for in the second virial approximation. The opening angle was observed to be relatively constant and close to 58 degrees, but it was necessary to include a significant distribution in radius and pitch. For diluted supercoils with vanishing mutual interaction, the derived structural results agree with independent measurements, including the distribution in linking number deficit as determined by gel electrophoresis. With increasing plasmid concentration, prior and covering the transition to the liquid-crystalline phase, the radius and pitch are seen to decrease significantly. The latter observation shows that compaction of negatively supercoiled DNA by confinement results in a decrease in writhing number at the cost of a positive twist exerted on the DNA duplex. It is our conjecture that the free energy associated with this excess twist is of paramount importance in controlling the critical boundaries pertaining to the transition to the anisotropic, liquid-crystalline phase.

Biophysical Phenomena↗

PubMed2003

Refolding of a high molecular weight protein: salt effect on collapse.

Small-angle neutron scattering experiments were performed on dilute solutions of a high molecular weight protein (fibronectin, M = 580 kg/mol) in four cases: native conditions; unfolded state obtained by a denaturing agent (urea); and two badly refolded (or collapsed) states obtained by progressive elimination of the denaturing agent in salt-containing or salt-free solutions. Our main result is concerned by the conformation of the protein as the attempt for refolding is driven with or without salt. In salt-containing solution, we observe unambiguously that the protein chain collapses at large length scales but still obeys to a Gaussian statistics at short length scales. In other words, the globule embodies a large quantity of solvent compared to the compact situation. In salt-free solutions, the badly refolded protein is not globular but displays both a coil-like and an open conformation at large length scales and a local high density area. This behavior is discussed with respect to the scaling theories for polymers and polyampholytes.

Computer Simulation↗