PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “GOLD AND COMPOUNDS”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81Linked to original sources

Goldsalts, levamisole and D-penicillamine as first choice slow-acting antirheumatic drugs in rheumatoid arthritis--a long-term follow-up study.

In the present study, 345 rheumatoid arthritis patients were treated using goldsalts, D-Penicillamine or levamisole as the slow-acting antirheumatic drug of first choice. Goldsalts were given to 182 patients, levamisole to 139 and D-Penicillamine to 24. At the time of the present evaluation, 83 patients were still on goldsalts (44.6%), 63 on levamisole (45.2%) and 11 on D-Penicillamine (45.9%). Adverse reactions required interruption of treatment in 64 patients on goldsalts (35.2%), in 44 on levamisole (31.7%) and in 5 on D-Penicillamine (20.8%). Inefficacy was responsible for withdrawal of 33 patients receiving goldsalts (18.1%), 30 receiving levamisole (21.6%) and 8 receiving D-Penicillamine (33.3%). The duration of treatment was 4.6 years for goldsalts, 3.6 years for levamisole and 3.6 years for D-Penicillamine. In the present analysis none of the compounds was found to have a definite advantage over the others. The rather favourable treatment continuation rates in this study can be attributed to the fact that the slow-acting antirheumatic drugs were given at an early stage of the disease, preferably before the occurrence of radiological lesions.

Adult↗

Chemotherapy of childhood medulloblastoma.

A number of chemotherapeutic agents have been shown to have anti-tumor activity against childhood medulloblastoma. Ten-year survival with optimal surgery and radiation therapy ranges from 5% to 25%. Carefully controlled clinical trials utilizing a combination of surgery, radiation therapy, and chemotherapy should be employed in the early stages of the disease in an attempt to define which drugs are most effective, and to improve the survival rate.

Adolescent↗

Mechanical properties of a dental ceramic coated by RF magnetron sputtering.

Metal and ceramic thin film coatings were deposited onto a dental ceramic via radio frequency (RF) magnetron sputtering. The objectives of the study were to determine if a coherent interface could be produced between the coating and the substrate and if the coating significantly would improve the mechanical properties of the ceramic. Thin films of Au, Al, and AlN were deposited in this study. Mechanical testing results indicated that a significant improvement in flexural strength was observed with both Au and Al coatings while significant improvements in the flexural modulus were observed with all three materials. SEM analysis indicated that the interfaces were coherent and also suggested two mechanisms (crack bridging and crack blunting) that could be responsible for the enhanced mechanical properties.

Aluminum↗

Electrocatalysis of oxygen at hemoglobin-Au colloid-1,4-benzenedimethanethiol modified electrode.

A novel renewable O2 sensor based on the direct electron transfer of hemoglobin (Hb) is proposed. Hb was immobilized on a gold nanoparticles (GNP) associated with a 1,4-benzenedimethanethiol (BDT) monolayer which were modified the electrode. The direct electrochemistry of Hb was investigated by electrochemical methods and cyclic voltammetric showing a pair of redox peaks of Hb. The high efficiency of the Hb/GNP/BDT modified gold electrode towards the catalytic electro-reduction of oxygen has been observed and the potential application of Hb/GNP/BDT modified gold electrode as biosensors to monitor O2 is proposed. The electrocatalytic response showed a linear dependence on the O2 concentration ranging from 2.0 to 40.0 micromol/L.

Benzene Derivatives↗

Potential-resolved electrochemiluminescence of ru(bpy)3(2+)/C2O4(2-) system on gold electrode.

The electrogenerated chemiluminescence of Ru(bpy)3(2+)/C2O4(2-) system on a pre-polarized Au electrode was studied using a potential-resolved electrochemiluminescence (PRECL) method. Two anodic ECL peaks were observed at 1.22 V (vs. SCE) (EP1), 1.41 V (vs. SCE) (EP2), respectively. The effects of the concentration of oxalate and Ru(bpy)3(2+), adsorbed sulphur, CO2, O2, pH of the solution and pretreatment of the Au electrode on the two PRECL peaks were examined. The surface state of the pre-oxidized gold electrode was also studied using the X-ray photoelectron spectroscopy (XPS) technique. Moreover, comparative studies on i-E and I-E curves were carried out and a possible mechanism involving both the catalytic and the direct electro-oxidation pathways was proposed for the ECL of Ru(bpy)3(2+)/C2O4(2-) system. EPI is attributed to the Ru(bpy)3(2/3+) reaction catalysed by C2O4(2-) to generate Ru(bpy)3(2+)*. EP2 is likely because C2O4(2-) was oxidized at the electrode to form CO2(-)*, followed by reaction with Ru(bpy)3(3+) to generate Ru(bpy)3(2+)*.

2,2'-Dipyridyl↗

Cathodic electrochemiluminescence of acetonitrile, acetonitrile-1,10-phenanthroline and acetonitrile-ternary Eu(III) complexes at a gold electrode.

Cathodic electrochemiluminescence (ECL) behaviours of the acetonitrile, acetonitrile-1,10-phenanthroline (phen) and acetonitrile-ternary Eu(III) complex systems at a gold electrode were studied. One very weak cathodic ECL-2 at -3.5 V was observed in 0.1 mol/L tetrabutylammonium tetrafluoroborate (TBABF(4)) acetonitrile solution. When 10 mmol/L tetrabutylammonium peroxydisulphate [(TBA)(2)S(2)O(8)] was added to 0.1 mol/L TBABF(4) acetonitrile solution, another cathodic ECL-1 at -2.7 V appeared and the potential for ECL-2 was shifted from -3.5 to -3.1 V. Furthermore, ECL-2 intensity was enhanced about 20-fold. When 1 x 10(-4) mol/L phen was added to 0.1 mol/L TBABF(4) + 10 mmol/L (TBA)(2)S(2)O(8) acetonitrile solution, the ECL intensities of ECL-1 and ECL-2 were enhanced about 20-fold compared with those of 0.1 mol/L TBABF(4) + 10 mmol/L (TBA)(2)S(2)O(8) acetonitrile solution. The maximum emission peaks of ECL-1 and ECL-2 in the three systems mentioned above appeared at about 530 nm. The products obtained by electrolysing 0.1 mol/L TBABF(4) acetonitrile solution at -3.5 V for 20 min were analysed by Fourier Transform Infrared (FTIR) spectra and gas chromatography-mass spectrometry (GC-MS) and the emitter of ECL-1 and ECL-2 was identified as excited state polyacetonitrile. When ternary Eu(III) complexes were presented in 0.1 mol/L TBABF(4) + 10 mmol/L (TBA)(2)S(2)O(8) acetonitrile solution, another maximum emission peak with a narrow band centred at about 610 nm appeared in ECL-1 in addition to the maximum emission peaks at about 530 nm for ECL-1 and ECL-2. The emitter of ECL emission at 610 nm was identified as the excited states Eu(III)*. The mechanisms for cathodic ECL behaviours of the acetonitrile, acetonitrile-phen and acetonitrile-ternary Eu(III) complex systems at a gold electrode have been proposed. The extremely sharp emission bands for ternary Eu(III) complexes may have analytical potential.

Acetonitriles↗

Kinetic, thermodynamic, and mechanistic patterns for free (unbound) cytochrome c at Au/SAM junctions: impact of electronic coupling, hydrostatic pressure, and stabilizing/denaturing additives.

Combined kinetic (electrochemical) and thermodynamic (calorimetric) investigations were performed for an unbound (intact native-like) cytochrome c (CytC) freely diffusing to and from gold electrodes modified by hydroxyl-terminated self-assembled monolayer films (SAMs), under a unique broad range of experimental conditions. Our approach included: 1) fine-tuning of the charge-transfer (CT) distance by using the extended set of Au-deposited hydroxyl-terminated alkanethiol SAMs [-S-(CH(2))(n)-OH] of variable thickness (n=2, 3, 4, 6, 11); 2) application of a high-pressure (up to 150 MPa) kinetic strategy toward the representative Au/SAM/CytC assemblies (n=3, 4, 6); 3) complementary electrochemical and microcalorimetric studies on the impact of some stabilizing and denaturing additives. We report for the first time a mechanistic changeover detected for "free" CytC by three independent kinetic methods, manifested through 1) the abrupt change in the dependence of the shape of the electron exchange standard rate constant (k(o)) versus the SAM thickness (resulting in a variation of estimated actual CT range within ca. 15 to 25 A including ca. 11 A of an "effective" heme-to-omega-hydroxyl distance). The corresponding values of the electronic coupling matrix element vary within the range from ca. 3 to 0.02 cm(-1); 2) the change in activation volume from +6.7 (n=3), to approximately 0 (n=4), and -5.5 (n=6) cm(3) mol(-1) (disclosing at n=3 a direct pressure effect on the protein's internal viscosity); 3) a "full" Kramers-type viscosity dependence for k(o) at n=2 and 3 (demonstrating control of an intraglobular friction through the external dynamic properties), and its gradual transformation to the viscosity independent (nonadiabatic) regime at n=6 and 11. Multilateral cross-testing of "free" CytC in a native-like, glucose-stabilized and urea-destabilized (molten-globule-like) states revealed novel intrinsic links between local/global structural and functional characteristics. Importantly, our results on the high-pressure and solution-viscosity effects, together with matching literature data, strongly support the concept of "dynamic slaving", which implies that fluctuations involving "small" solution components control the proteins' intrinsic dynamics and function in a highly cooperative manner as far as CT processes under adiabatic conditions are concerned.

Alkanes↗

A study of protein A-gold resolution for immunoelectron microscopy.

For the purpose of investigating a topographical correlation between antigen molecules and protein A-gold(PAG) particles which localized as an immunocytochemical probe, the simplest model on a localization pattern of antigen molecules, which were arranged two-dimensionally on a plane surface of the resin, was used. Ultrathin sections of a G-actin layer, which was adsorbed on epoxy resin and was re-embedded subsequently in JB-4 resin, was stained indirectly with rabbit anti-actin antibody and subsequently by PAG. From this immunoelectron microscopy, a histogram (relative frequency, denoted by y vs. relative length, denoted by x) was obtained using a computer-assisted method. For this histogram, a fitting curve was calculated by a least squares optimization and three parameters (H, U, and W) of the curve which could be useful for a study on the topographical organization of antigen molecules were estimated. Parameter H (maximum y of the curve) would reflect the maximum amount of epitopes at x = U. Half width W, which is the width of the curve at y = H/2, would reflect a breath of epitope masses. This fitting curve was separated into two overlapping curves whose Ws were different from each other. The one constituent curve of which value W was smaller than the other was regarded as a unit curve and the other constituent curve could be resolved into many unit curves whose W values are the same. From these unit curves, the resolution power of the immunoelectron microscopy, using a post-embedding procedure of ultrathin sections, was estimated as 58-66 A degrees.

Actins↗

Real-time analysis of enzymatic surface-initiated polymerization using surface plasmon resonance (SPR).

The kinetics of enzymatic surface-initiated polymerization of PHB on gold surface has been examined by SPR and the resultant polymer layers characterized by AFM and FT-IR spectrometry. The immobilized enzyme catalyzed surface-initiated polymerization of 3HB-CoA, resulting in the formation of a polymer brush on the surface. The rate of polymer growth from the surface was monitored by SPR in real-time. Polymer growth as measured by the increase in the resonance angle showed no apparent lag phase during the polymerization reaction. SPR analysis also revealed that the thickness of the polymer film could be controlled by varying the initial enzyme density on the surface. The average thicknesses of the PHB film after polymerization reaction were 95, 45 and 15 nm for the surfaces that were treated with 0.5, 0.3 and 0.1*10(-6) M of enzyme, respectively. The binding of PHA synthase at different concentration to the mixed SAMs and subsequent polymerization.

Acyltransferases↗

Substitution management in opioid dependence.

Substitution treatment (replacement therapy) is the most widespread and the most frequently researched therapeutic approach to heroin dependence. At present, the "gold standard" is methadone maintenance, but the use of other agonists and of combined compounds with antagonists are increasingly used, especially Buprenorphine. This paper reviews the main findings from research and their consequences for best practice rules. The evolution and organisation of substitution treatment in Europe is described, indicating a major discrepancy in administrative regulations. Emerging trends are also mentioned, as well as the merits and limitations that mark the place of substitution treatment in a comprehensive therapeutic network for opioid dependence.

Animals↗

In vitro and in vivo effects of gold salts on chemotaxis and random migration of rat polymorphonuclear leucocytes.

The effect produced by three gold salts (sodium aurothiomalate, allochrysine, auranofin) on chemotaxis and random migration of rat polymorphonuclear leucocytes (PMN) was investigated under various experimental conditions. The drug activity was examined after incubation in vitro or after administration in vivo. PMNs were recruited after the induction of two acute inflammatory reactions (pleurisies induced by isologous serum or a suspension of calcium pyrophosphate (CaPP) crystals). The three gold salts administered in vivo and in vitro inhibited the chemotactic responses of the two cell types. This action was dose-dependent. Auranofin was the most effective substance while sodium aurothiomalate was the least. The random migration was not always significantly depressed especially for CaPP-elicited cells. Reduction in neutrophil chemotaxis might be an important additional mechanism in the action of gold salts and their activity on inflammatory PMNs recruited at inflammatory foci might be beneficial in the treatment in rheumatic diseases in which PMN migration would be implicated.

Animals↗

[Materials for reconstruction of the middle ear].

To rehabilitate most cases of conductive hearing loss closure of ear drum perforations and rebuilding of the ossicular chain can be performed. Due to the great number of biocompatible bone substitute materials available it is occasionally difficult for the surgeon to choose the most favorable substitute. Autogenous structures (ossicles, cortical bone, cartilage) and allogenous tissues (ossicles, cortical bone, cartilage, dentin) are possible bone replacement materials. Xenogenic tissue is currently not used in middle ear surgery. Ionomer cement is a hybrid material for replacement of bone but does not fit direct classification of the various classes of alloplastic materials in current use: that is, metals (gold, steel wire, platinum, titanium), plastics (polyethylene, polytetrafluorethylene) and ceramics (ceramic oxide, carbon, calcium-phosphate ceramic, vitreous ceramic). For restoration of the sound conductive apparatus preference is given to autogenous ossicles because cortical bone is resorbed and cartilage weakens over time. Most surgeons do not use allogenous tissue, because of the possible transmission of such infectious disease as immunodeficiency syndrome or Creutzfeldt-Jakob disease. Only dentin deserves special attention as a possible bone substitute in the middle ear because its form can be preserved during sterilization. Based on the observations available to date, it becomes apparent that titanium implants hold greater promise than gold. Form-stable synthetic materials are not generally recommended due to foreign body reactions which have been confirmed by many investigators. Ceramic materials (e.g. ceramic oxide, carbon, calcium-phosphate ceramic, glass ceramic) are well tolerated in the middle ear and have also proved to be useful over time. Hybrid bone substitute ionomer cement is easily workable and well integrated, showing a good functional outcome. For many years good results in otosclerosis surgery have been achieved with a prosthesis made of platinum-wire and Teflon. Short-term follow-up periods hold great promise with pistons made of gold. Autogenous ossicles, ionomer cement and recently titanium protheses--as far as usable--are employed by the author for reconstructing the middle ear. For the time being platinum-Teflon prostheses and gold are used in otosclerosis surgery.

Animals↗

Remote NADH imaging through an ordered array of electrochemiluminescent nanoapertures.

In this report, we present an ordered array comprising thousands of nanoapertures for the electrochemiluminescent (ECL) detection of NADH. It was fabricated on the distal face of a coherent optical fiber bundle. Such a high-density array of nanoapertures combines optical, imaging and electrochemical properties. Indeed, each nanoaperture is surrounded by a gold nanoring, which acts as an electrode material. The behavior of the array was characterized by cyclic voltammetry and it shows excellent electrochemical performances. NADH is the analyte, which is measured in presence of Ru(bpy)3(2+). The ruthenium complex mediates the NADH oxidation and this coenzyme acts as a co-reactant in the ECL mechanism. ECL light is generated at the distal face of the array by each gold ring electrode. A fraction of this ECL light is collected by the corresponding nanoaperture, transmitted through the optical fiber bundle and finally imaged on the proximal face with a CCD camera. In this work, we show that NADH concentration is remotely detected by an oxidative-reductive ECL mechanism. We present also some preliminary results about the ECL process of NADH with Ru(bpy)3(2+). The ECL behavior of NADH on gold surface is reported. The influence of the applied potential on the collected light intensity was investigated. The variation of the ECL intensity measured through the nanoaperture array with NADH concentration is linear. Remote ECL detection of NADH is spatially resolved over a large area with a micrometer resolution through the array. Therefore, such array integrates several complementary functions: ECL light generation, collection, transmission and remote imaging in an array format.

Electrochemistry↗

Self-assembled monolayers of alkanethiols on gold modulate electrophysiological parameters and cellular morphology of cultured neurons.

Self-assembled monolayers (SAMs) of omega-substituted alkanethiols on gold have been explored as well defined in vitro model surfaces for the investigation of neuronal growth and function. When used as cell culture substrates, surfaces with monolayers functionalized with terminal -COOH groups support neuron attachment and growth even without an intermediate protein layer. Addition of a poly-L-lysine layer (PLL) to the -COOH terminated monolayers significantly increases total neurite outgrowth. Mixed monolayers containing -COOH and -CH3 terminal groups in 1:10 and 1:100 ratios poorly support neuron adhesion and preclude neurite extension. A layer of PLL improves the ability of mixed monolayer surfaces to support neuronal growth in culture. The morphology of cultured neurons depends on the chemical composition of SAMs on the support surface. Using glass microelectrode intracellular recording, the properties of cell culture substrates modulate the dynamic properties of action potentials of cultured neurons. These findings provide insight into the cellular responses of excitable cells to the chemical details of a surface and, thus, may help direct the rational design of biologically active materials.

Alkanes↗

Highly sensitive gold nanoparticles biosensor chips modified with a self-assembled bilayer for detection of Con A.

In this paper, an improved method for detection of Concanavalin A (Con A) with label-free optical biosensors is reported. 1-Dodecanethiol (DDT) was self-assembled onto gold nanoparticles which were deposited on glass slides, and then glycolipid molecules were inserted into dodecanethiol by physical interactions only. The recognition between Con A and carbohydrate was observed by UV-vis spectrophotometry. The absorption spectrum shifted when Con A was bound to the sugar residues of glycolipids immobilized onto nanogold slides, while almost no spectrum change was observed when another nonspecific protein molecule met the nanogold slides. The self-assembled bilayer on nanogold substrates had very high sensitivity for Con A, the minimum detection concentration of Con A can be down to 0.1 nM. In addition to the ultra sensitivity for investigating carbohydrate-lectin interaction, the self-assembled bilayer structure, is expected to replace many receptors which require time-consuming organic syntheses for the fixation to the transducer. The simplicity and sensitivity of this biosensor architecture once again show the prospect of nanogold application in biosensor.

Biosensing Techniques↗